Spirulina Platensis microalgae strain modified with phosphoric acid as a novel support material for Co–B catalysts: Its application to hydrogen production

Spirulina platensis is defined as the dried biomass of cyanobacteria in commercial use and is biomass with high carbon content. Spirulina platensis microalgae strain supported-CoB catalysts to produce hydrogen from sodium borohydride (NaBH₄) were prepared for the first time. The Spirulina platensis microalgae strain was modified with phosphoric acid (H₃PO₄) to proton. Then, the supported catalyst was performed to produce hydrogen from NaBH₄ hydrolysis. The optimum H₃PO₄ concentration, optimum Co amount, and optimum impregnation time of the H₃PO₄ with the microalgae strain were investigated. The maximum hydrogen production rate for the 30% CoB catalyst supported on microalgae strain treated with H₃PO₄ was found to be 3940 mL min⁻¹g⁻¹catalyst. X-ray powder diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Brunauer–Emmett–Teller (BET), and scanning electron microscope (SEM) analysis were performed for characterization of CoB catalyst supported on Spirulina microalgae strain. After four consecutive uses, the performance and conversion values of this catalyst were investigated. At the same time, the effect of temperature on the hydrogen production from this hydrolysis reaction was examined. The activation energy with the CoB catalyst supported on Spirulina microalgae strain was calculated as 35.25 kJ mol⁻¹. According to the kinetic model of a power law, n value was found as 0.25 for kinetic studies.     

The use of metallurgical waste sludge as a catalyst in hydrogen production from sodium borohydride

In this study, the metallurgic sludge which contained oil and was obtained as waste of grinding, sharpening and milling parts was used in the production of hydrogen (H₂) from sodium borohydride (NaBH₄). The hydrolysis of NaBH₄ with the metallurgic sludge catalyst was investigated depending on several parameters such as sodium hydroxide (NaOH) concentration, catalyst amount, NaBH₄ concentration and temperature. The obtained metallurgic sludge catalyst was characterized by the XRD, FT-IR and SEM techniques and was evaluated for its activity in the H₂ generation from NaBH₄ hydrolysis. The maximum H₂ production rate from the hydrolysis of NaBH₄ with the metallurgic sludge catalyst was calculated as 9366 ml min⁻¹.g_cat⁻¹. The value of activation energy was found as 48.05 kJ mol⁻¹.     

Cobalt nanoparticles supported on magnetic core-shell structured carbon as a highly efficient catalyst for hydrogen generation from NaBH4 hydrolysis

A novel recyclable cobalt nanocatalyst, supported on magnetic carbon with core-shell structure, was successfully synthesized by using wetness impregnation-chemical reduction method for hydrogen generation from hydrolysis of NaBH₄. The resultant nanocomposite was characterized to determine the structural and physical-chemical properties by a series of analytical techniques such as FT-IR (Fourier transform infrared spectroscopy), XRD (X-ray diffraction), SEM (scanning electron microscope), EDX (energy-dispersive X-ray spectroscopy), TEM (transmission electron microscopy), etc. The results demonstrated that amorphous cobalt nanoparticles were homogeneously surrounded on the surface of the support due to having abundant hydrophilic groups (such as aldehyde and hydroxyl groups) on the surface of carbon layer for the effective immobilization of metal ions. The supported catalyst showed superior catalytic performance towards the hydrolysis reaction of NaBH₄ at room temperature. The total rate of hydrogen generation and activation energy were calculated to be 1403 ml H₂ g_cat^?1 min^?1 and 49.2 kJ mol^?1, respectively, which were comparable to the values of most cobalt-based catalyst reported for hydrogen production from hydrolysis of NaBH₄. Additionally, reusability test revealed that the hydrogen in NaBH₄ substrate could be completely released within 25 min with a minimum hydrogen generation rate of 832 ml H₂ g_cat^?1 min^?1 even after five runs of hydrolytic reaction, implying the as-prepared Co/Fe₃O₄@C composite could be considered as a promising candidate catalyst for portable hydrogen fuel system such as PEMFC (proton exchange membrane fuel cells).     

A study on hydrogen generation from NaBH4 solution using Co-loaded resin catalysts

Hydrogen production via chemical processes has gained great attention in recent years. In this study, Co-based complex catalyst obtained by adsorption of Co metal to Amberlite IRC-748 resin and Diaion CR11 were tested for hydrogen production from alkaline NaBH₄ via hydrolysis process. Their catalytic activity and microstructure were investigated. Process parameters affecting the catalytic activity, such as NaOH concentration, Co percentage and catalyst amount, as well as NaBH₄ concentration and temperature were investigated. Furthermore, characteristics of these catalysts were carried out via SEM, XRD and FT-IR analysis. Hydrogen production rates equal to 211 and 221 ml min⁻¹ g_cat⁻¹ could be obtained with Amberlite IRC-748 resin and Diaion CR11 Co based complex catalysts, respectively. The activation energies of the catalytic hydrolysis reaction of NaBH₄ were calculated as 46.9 and 59.42 kJ mol⁻¹ for Amberlite IRC-748 resin and Diaion CR11 based catalysts respectively kJ mol⁻¹ from the system consisting of 3% Co, 10 wt% NaBH₄ and 7 wt% NaOH as well as 50 mg catalyst dosage. It can be concluded that Co-based resins as catalysts for hydrogen production is an effective alternative to other catalysts having higher rate.     

Effect of phosphoric acid addition on the hydrogen production from hydrolysis of NaBH4 with Cu based catalyst

Cu based catalysts were synthesized in water and methanol solvents by chemical reduction with sodium borohydride (NaBH₄). The obtained catalyst was used to catalyze the NaBH₄ hydrolysis reaction with phosphoric acid (H₃PO₄) including different concentrations. Surface morphology and structural properties of the Cu based catalysts prepared in water and methanol solvents were studied using by X-ray diffraction (XRD), scanning electron microscopy (SEM), surface area measurements and Fourier-transform infrared spectroscopy (FTIR) analyses, respectively. The catalytic activity of the catalysts has been tested by measuring the hydrogen production rate by the acidified hydrolysis of NaBH₄. The maximum hydrogen production rates in the hydrolysis reaction including 0.25 M H₃PO₄ using the Cu based catalyst prepared in water and methanol solvents were 825 and 660 ml g^?1min^?1, respectively. At the same time, the hydrogen production experiments were carried out from this hydrolysis reaction with only H₃PO₄ and NaBH₄ interactions without using Cu metal catalyst. The activation energy obtained based on the nth order reaction model was found to be 61.16 kJ mol^?1.     

Synthesis of cobalt-doped catalyst for NaBH4 hydrolysis using eggshell biowaste

In the present study, a cobalt-doped catalyst was prepared from chicken eggshell powder (CEP) biowaste to be used in the hydrolysis of sodium borohydride (NaBH₄). In the presence of the prepared catalyst (CEP_cat), possible effects of the parameters of NaOH concentration (%), catalyst amount (g), NaBH₄ concentration (%), process temperature (^oC) and reusability affecting the hydrolysis of sodium borohydride were examined. The CEP_cat obtained was characterized with FT-IR, TGA, XRD, SEM and EDX analyses. The hydrogen generation rate (HGR) was determined as 432 mL g_Co⁻¹ min⁻¹ in the presence of 1 g CEP_cat, a CoO/CaO ratio of 10/90 and 1% NaBH₄ concentration. The activation energy of the NaBH₄ hydrolysis reaction was calculated as 16.78 kJ mol⁻¹. After 16 reuses of the CEP_cat there was no significant decrease in the hydrogen volume. Compared to the first use while there was an increase in the HGR. These results showed that the CEP_cat prepared has a significant advantage over other catalysts for use in NaBH₄ hydrolysis.     

A novel cost-effective catalyst from orange peel waste protonated with phosphoric acid for hydrogen generation from methanolysis of NaBH4

In this study, orange peel (OP), one of the organic wastes, was first used as a metal-free catalyst for the production of hydrogen from sodium boron hydride (NaBH₄). In order to prepare an orange peel catalyst (OP–H₃PO₄-Cat) with the best catalytic activity, experiments were carried out on pure orange peel with different acid types, different burning temperatures and different burning times. As a result of these experiments, it was determined that OP-H₃PO₄-Cat treated with 30% H₃PO₄ and burned at 400 °C for 45 min had the best catalytic activity. The OP-H₃PO₄-Cat material was characterised by several techniques such as FTIR, XRD and SEM. As a result, the hydrogen generation rates (HGR) at 30 °C and 60 °C in the methanolysis reaction of 2.5% NaBH₄ catalysed by OP-H₃PO₄-Cat were found as 45,244 and 61,892 mLmin^?1g.cat^?1, respectively. The activation energy of OP-H₃PO₄-Cat catalyst was calculated as 12.47 kJmol^-1.     

Synthesis of novel biocatalyst from organic waste protonated with acid treatment for hydrogen production

In this research study, orange peel-based biocatalysts developed from different acid protonation were used as a metal-free catalyst for hydrogen production from sodium borohydride (NaBH₄). In order to prepare the orange peel-based biocatalyst with higher catalytic activity, experiments were conducted with pure orange peel, different acid molar concentrations, and calcination temperatures. The physical morphology, surface texture, and chemical interaction were thoroughly analyzed by XRD, FTIR Raman, FESEM, BET, and TGA. As a result of the experiment, it was determined that the highly acid-treated biocatalyst (40% H₃PO₄, 40% H₂SO₄, 40% HCl) and calcinated at 450 °C for 1 h had higher catalytic activity. As a result, bio-hydrogen production at 35 °C and 70 °C methanolysis with 3% NaBH₄ catalyzed by a mixture of acid-treated catalysts were found as 46,213 and 63,842 ml min⁻¹g.cat⁻¹, respectively. However, with the increase of molar concentration of biocatalyst with 40% individual acid prolonged samples, the HGR rates will not have a satisfactory value in comparison with the 40% mixture of the acid-treated catalyst due to less number of active sites.     

Hydrogen generation from NaBH4 hydrolysis catalyzed by cobalt (0)-Deposited cross-linked polymer brushes: Optimization with an experimental design approach

Proposing a novel catalyst that achieves catalytic hydrolysis of metal hydrides is an important stage in developing a hydrogen storage system. In this study, a cross-linked gel brush-cobalt (0) composite (Co@P4VP_GB@PMC) has been synthesized to obtain hydrogen from NaBH₄ solution. The morphology, structure, and composition of the obtained catalyst have been characterized by, FTIR, SEM, EDX, BET, XRD, ICP-MS and XPS. The parameters that significantly affect the hydrolysis of NaBH₄ (such as NaBH₄ concentration, NaOH amount, catalyst amount, and temperature) have been investigated using response surface methodology (RSM), an optimization method that has gained increasing importance in recent years. The hydrogen generation rate (HGR) was 4499 mL/min g_cat for Co@P4VP_GB@PMC when the NaBH₄ amount was 241.52 mM, NaOH amount 5 wt%, catalyst amount 10.55 mg and temperature 58.9 °C. Moreover, the apparent activation energy (E_a) for the catalytic hydrolysis reaction has been 41.27 kJmol^-1 obtained under optimum conditions. Additionally, the Co@P4VP_GB@PMC catalyst displayed significant reusability performance for up to five cycles without major loss of its activity. Compared with metal catalysts, this new cross-linked polymer gel brush-cobalt catalyst has excellent potential applications for hydrogen production by hydrolysis of metal hydrides due to its simple synthesis, low cost, and the easy availability of raw materials.     

A review on the catalysts used for hydrogen production from ammonia borane

Boron compounds have recently attracted attention in hydrogen production since they contain many hydrogen atoms. Among these compounds, ammonia borane, which has high hydrogen density (in weight basis), can be used to produce hydrogen through a hydrolysis reaction. However, since the ammonia borane solution is highly resistant to hydrolysis under ambient conditions, there is a need for active and stable catalysts to accelerate the reaction. In this review paper, unsupported and carbon-based supported metal catalysts used for hydrogen production through the hydrolysis of ammonia borane are presented. Noble metal catalysts (Ru, Rh, Pd, Pt and their binary and ternary alloys) and non-noble metal catalysts (Co, Ni, Fe, Cu and their binary and ternary alloys) were examined. The activation energy of reaction and turnover frequency (TOF) values were compared for these catalysts. Among the unsupported catalysts, it was concluded that the multi-metal catalyst systems (binary, ternary and quaternary) have higher catalytic activity than a single use of the same metals. In addition, the comparison showed that the supported catalysts are more resistant to catalytic cycles and suitable for long-term use. It was observed that CNT supported Rh (TOF = 706 mol H₂ mol cat⁻¹ min⁻¹) and graphene supported Ru (TOF = 600 mol H₂ mol cat⁻¹ min⁻¹) catalysts are the most active catalysts for the hydrogen generation from the ammonia borane at room temperature.     

Poly(2-aminoethyl methacrylate) based microgels catalyst system to be used in hydrolysis and methanolysis of NaBH4 for H2 generation

The poly(2-aminoethyl methacrylate) (p(AEM)) microgels were synthesized by microemulsion polymerization technique and used for in situ metal nanoparticle preparation to render as p(AEM)-M (M: Co or Ni) microgel composites and were used in p(AEM) based poly ionic liquid (PIL) microgels. Next, these p(AEM)) based microgel materials were used as catalysts for hydrogen (H₂) production from both hydrolysis and methanolysis reactions of sodium borohydride (NaBH₄). It was found that the catalytic hydrolysis of the NaBH₄ reaction, catalyzed by p(AEM)-Co microgel composite was completed in 140 min, whereas the methanolysis of NaBH₄ methanolysis catalyzed by the PIL of p(AEM)⁺Cl⁻ microgels was completed in 5 min both with 250 ± 2 mL H₂ production. Furthermore, p(AEM)-Co microgel composite catalysts maintained 80% catalytic activity after 5 consecutive uses in NaBH₄ hydrolysis. On the other hand, p(AEM)⁺Cl⁻ microgels were found to afford more than 50% catalytic activity even after 20 repetitive use in NaBH₄ methanolysis due to superior regeneration ability. Moreover, activation energy values for p(AEM)-Co microgel composites catalyzed NaBH₄ hydrolysis reaction were calculated as 38.9 kJ/mol in comparison to 37.3 kJ/mol activation energy of p(AEM)⁺Cl⁻ microgel catalyzed methanolysis reaction.     

Room temperature hydrogen generation from hydrolysis of ammonia–borane over an efficient NiAgPd/C catalyst

NiAgPd nanoparticles are successfully synthesized by in-situ reduction of Ni, Ag and Pd salts on the surface of carbon. Their catalytic activity was examined in ammonia borane (NH₃BH₃) hydrolysis to generate hydrogen gas. This nanomaterial exhibits a higher catalytic activity than those of monometallic and bimetallic counterparts and a stoichiometric amount of hydrogen was produced at a high generation rate. Hydrogen production rates were investigated in different concentrations of NH₃BH₃ solutions, including in the borates saturated solution, showing little influence of the concentrations on the reaction rates. The hydrogen production rate can reach 3.6–3.8 mol H₂ mol_cat⁻¹ min⁻¹ at room temperature (21 °C). The activation energy and TOF value are 38.36 kJ/mol and 93.8 mol H₂ mol_cat⁻¹ min⁻¹, respectively, comparable to those of Pt based catalysts. This nanomaterial catalyst also exhibits excellent chemical stability, and no significant morphology change was observed from TEM after the reaction. Using this catalyst for continuously hydrogen generation, the hydrogen production rate can be kept after generating 6.2 L hydrogen with over 10,000 turnovers and a TOF value of 90.3 mol H₂ mol_cat⁻¹ min⁻¹.     

Metal-organic frameworks (MOFs) and MOFs-derived CuO@C for hydrogen generation from sodium borohydride

Hydrogen gas has been considered as one of the promising sources of energy. Thus, several strategies including the hydrolysis of hydrides have been reported for hydrogen production. However, effective catalysts are highly required to improve the hydrogen generation rate. Two dimensional metal-organic frameworks (copper-benzene-1,4-dicarboxylic, CuBDC), and CuBDC-derived CuO@C were synthesized, characterized and applied as catalysts for hydrogen production using the hydrolysis and methanolysis of sodium borohydride (NaBH₄). CuBDC, and CuO@C display hydrogen generation rate of 7620, and 7240 mlH₂·g_cat⁻¹· min⁻¹, respectively for hydrolysis. While, CuBDC offers hydrogen generation rate of 9060 mlH₂·g_cat⁻¹· min⁻¹ for methanolysis. Both catalysts required short reaction time, and showed good recyclability. The materials may open new venues for efficient catalyst for energy-based applications.     

Influence of process parameters on enhanced hydrogen generation via semi-methanolysis and semi-ethanolysis reactions of sodium borohydride using phosphoric acid

The sodium borohydride(NaBH₄) semi-methanolysis and semi-ethanolysis reactions to produce hydrogen are investigated using phosphoric acid(H₃PO₄) for the first time. The NaBH₄ concentration, H₃PO₄ concentration, and temperature parameters on these semi-alcoholysis reactions are evaluated. The normalized hydrogen generation rates (HGRs) obtained from the NaBH₄ semi-methanolysis and semi-ethanolysis acidified using 0.5 M H₃PO₄ are 11684 and 9981 ml min⁻¹ g⁻¹, respectively. Moreover, the completion times of these semi-methanolysis and semi-ethanolysis reactions with 0.5 M H₃PO₄ acid concentration are 0.10 and 0.116 min, respectively. Kinetic studies with the power-law model are evaluated. The activation energies(Ea) obtained for the NaBH₄ semi-methanolysis and semi-ethanolysis using 0.5 M H₃PO₄ are 9.08 and 32.47 kJ mol⁻¹, respectively.     

Evaluating organic waste sources (spent coffee ground) as metal-free catalyst for hydrogen generation by the methanolysis of sodium borohydride

In this study, organic waste sources (spent coffee ground (SCG)) is used as metal-free catalyst in comparison with conventional noble-metal catalyst materials for hydrogen generation based on the methanolysis of sodium borohydride solution. Spent coffee ground (SCG) is used as a metal-free catalyst for the first time as treated with different chemicals. The aim is to synthesize the metal-free catalyst that can be used for the production of hydrogen, a renewable energy source. SCG, which was collected from coffee shops, was used for preparing the catalyst. To produce hydrogen by sodium borohydride (NaBH₄) methanolysis, SCG is pretreated with different chemical agents (H₃PO₄, KOH, ZnCl₂). According to the acid performances, the choice of phosphoric acid was evaluated at different mixing ratios (10%, 20%, 30%, 40%, 50%, 100%) (w/w), different temperatures (200, 300 and 400 °C) and burning times (30, 45, 60 and 90 min) for the optimization of SCG-catalyst. A detailed characterization of the samples were carried out with the aid of FTIR, SEM, XRD and BET analysis. In this study, the experiments were generally carried out effectively under ambient temperature conditions in10 ml methanol solution containing 0.025 g NaBH₄ and 0.1 g of the catalyst. The hydrogen obtained in the experimental studies was determined volumetrically by the gas measurement system. When evaluating the hydrogen volume, different NaBH₄ concentrations, catalyst amount and different temperature effects were investigated. The effect of the amount of NaBH₄ was investigated with 1%, 2.5%, 5%, and 7.5% ratio of NaBH₄ while the influence of the concentration of catalyst was carried-out at 0.05, 0.1, 0.15, and 0.25 g catalysts. Four different temperatures were tested (20, 30, 40, 50 and 60 °C) to explore the performance of the catalyst under different temperatures. The experiments by using SCG-catalyst treated with H₃PO₄ reveal that the best acid ratio was 100% H₃PO₄. The maximum hydrogen production rate with the use of SCG-catalyst for the methanolysis of NaBH₄ was found to be 8335.5 mL min⁻¹gcat⁻¹. Also, the activation energy was determined to be 9.81 kJ mol⁻¹. Moreover, it was discovered that there was no decline in the percentage of converted catalyst material.     

Synthesis of polymer supported Ni (II)-Schiff Base complex and its usage as a catalyst in sodium borohydride hydrolysis

Influence of using as catalysis, Ni-Schiff Base complex which we previously synthesized [1] used to support with amberzyme oxirane resin (A.O.R.) polymer for increasing the catalytic activity in NaBH₄ hydrolysis reaction, to hydrogen generation was studied. The prepared catalyst was characterized by using SEM, XRD, BET, FT-IR analyze technique. Polymer supported Ni-Schiff Base complex catalyzed NaBH₄ hydrolysis reaction was investigated depending on concentration of NaBH₄, concentration of NaOH, temperature, percentage of Ni complex in total polymer supported Ni-Schiff Base complex and amount of catalyst factors. The maximum hydrogen production rate from hydrolysis of sodium borohydride with nickel-based complex catalyst compared to the pure nickel catalyst is increased from 772 mL H₂·g^?1 cat.·min^?1 to 2240 mL H₂ g^?1 cat.·min^?1 [1], and with supported amberzyme oxirane resin polymer this nickel based complex catalyst was increased to 13000 mL H₂·g^?1 cat.·min^?1 at 30 °C. The activation energy of complex catalyzed NaBH₄ hydrolysis reaction was found as 25.377 kJ/mol. This work also includes kinetic information for the hydrolysis of NaBH₄.     

Magnetic dendritic KCC-1 nanosphere-supported cobalt composite as a separable catalyst for hydrogen generation from NaBH4 hydrolysis

The introduction of magnetism into a catalyst can greatly optimize its separation performance. In the present work, a kind of magnetically separable catalysts for promoting NaBH₄ hydrolysis have been fabricated by anchoring cobalt nanoparticles on magnetic dendritic KCC-1 nanospheres composed of magnetic Fe₃O₄ core and fibrous shell. The fabricated catalysts were characterized with various characterization methods, including absorption spectroscopy (AAS), scanning electron microscopy (SEM), high-resolution transmission electronic microscopy (HRTEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), vibrating sample magnetometry (VSM), and Fourier transform infrared (FT-IR), etc. This kind of catalysts exhibit high catalytic activity for promoting the hydrolysis of NaBH₄ under alkaline conditions, giving a hydrogen generation rate and activation energy of 3.83 L min⁻¹ g_Co⁻¹ (30 °C) and 53.63 kJ mol⁻¹, respectively. After used for 5 cycles, the catalyst showed 36.5% catalytic activity reserved. Most importantly, the magnetism of the catalyst made it easily separated and recycled from the solution after the reaction completed. The development of this kind of catalysts could provide a promising option for catalyzing NaBH₄ hydrolysis for portable hydrogen production from.     

Fe doped-CoB catalysts with phosphoric acid-activated montmorillonite as support for efficient hydrogen production via NaBH4 hydrolysis

In this study, montmorillonite (MMT) clay was modified with different acids to be used as support material. The modified MMT clay was used to obtain hydrogen in the hydrolysis reactions of NaBH₄ (NaBH₄-HR) as a support material for the Co–B and Co–Fe–B catalyst. During the activation of MMT clay, the effects of different acids, phosphoric acid (H₃PO₄) concentration, and impregnation time with H₃PO₄ were investigated. During the hydrogen generation from the NaBH₄-HR, effects of Co loading, Fe loading, NaBH₄ concentration, temperature and, catalyst durability were investigated. The maximum HGRs for MMT-H₃PO₄–CoB and MMT-H₃PO₄–Co–Fe–B treated with 5 M H₃PO₄ for 7 days were 1869 and 4536 mL/min/g_catalyst, respectively. The activation energies for MMT-H₃PO₄–CoB and MMT-H₃PO₄–Co–Fe–B catalyst samples were 49.5 and 38.90 kJ/mol.     

Low-cost and reusable iron- and nickel-based metal boride nanoparticles for efficient catalytic hydrolysis of sodium borohydride

Development of efficient catalysts for hydrogen evolution reaction is of key importance for the safe storage and utilization of hydrogen from the hydrolysis of NaBH₄. In this study, a series of nanocatalysts containing iron- and nickel-based metal borides were developed through a mechanochemical route followed by a wet milling step. The use of the mole ratio of metal chlorides to NaBH₄ as 1:2 enabled the simultaneous formation of Ni₃B and FeB phases, while the room-temperature synthesis method caused a uniform morphology with an average particle size and surface are of 70 nm and 41.8 m²/g, respectively. This powder showed the best catalytic performance compared to other samples with a hydrogen generation rate value of 758 ml H₂ min^?1 g_cat^?1 at room temperature and an activation energy of 40.8 kJ/mol. The catalyst performed good durability for each cycle and retained about 70% of its initial catalytic activity after 5 cycles. The availability of active iron, nickel, and boron species on the surface contributed to the enhancement of catalytic activity. As-prepared catalysts can be considered as low-cost and reusable materials for the efficient hydrolysis of sodium borohydride.     

Co3xCu3-3x(PO4)2 microspheres,a novel non-precious metal catalyst with superior catalytic activity in hydrolysis of ammonia borane for hydrogen production

Development of robust and cheap catalyst for fast hydrogen evolution from ammonia borane (AB) aqueous solution is an interesting and important topic in the field of hydrogen energy. Herein, a novel non-precious Co_3xCu_3-3x(PO₄)₂ catalyst possessing high reactivity in AB hydrolysis has been developed for the first time. By tuning the molar ratio of Co and Cu, a series of Co_3xCu_3-3x(PO₄)₂ with different x were synthesized and the catalytic behavior in AB hydrolysis was examined. At the optimal x of 0.8, an ultrahigh turnover frequency of 72.6 min⁻¹ was achieved. Additionally, the synergistic effect between Cu₃(PO₄)₂ and Co₃(PO₄)₂ was experimentally confirmed, and the reaction kinetics of AB hydrolysis catalyzed by Co_2.4Cu_0.6(PO₄)₂ were investigated. This work provides a simple route and some new insights for the fabrication of a cheap P-containing catalyst with robust catalytic performance.