Hydrogen supply chain scenarios for the decarbonisation of a German multi-modal energy system

Analysing hydrogen supply chains is of utmost importance to adequately understand future energy systems with a high degree of sector coupling. Here, a multi-modal energy system model is set up as linear programme incorporating electricity, natural gas as well as hydrogen transportation options for Germany in 2050. Further, different hydrogen import routes and optimised inland electrolysis are included. In a sensitivity analysis, hydrogen demands are varied to cover uncertainties and to provide scenarios for future requirements of a hydrogen supply and transportation infrastructure. 80% of the overall hydrogen demand of 150 TWh/a emerge in Northern Germany due to optimised electrolyser locations and imports, which subsequently need to be transported southwards. Therefore, a central hydrogen pipeline connection from Schleswig-Holstein to the region of Darmstadt evolves already for moderate demands and appears to be a no-regret investment. Furthermore, a natural gas pipeline reassignment potential of 46% is identified.     

Optimization of long-distance and large-scale transmission of renewable hydrogen in China: Pipelines vs. UHV

The reverse distribution of renewable energy resources and load centers makes exploring the optimal transmission mode of long-distance and large-scale renewable hydrogen the key to solving the bottleneck of renewable hydrogen development. This study incorporates hydrogen pipeline (HGP), natural gas pipeline (NGP), and Ultra High Voltage (UHV) into an optimal planning model framework and analyzes the optimal transmission mode, quantity, network, and cost of large-scale renewable hydrogen in China. Constructing a sensitivity analysis framework, this study also investigates the optimal transmission mode changes under different scenarios. The results show that the optimal mode of large-scale renewable hydrogen transmission in the province is NGP, and 5.4% of supply level is the critical point to export renewable hydrogen inter-provincially. It switches to the combination of NGP and HGP when the unit transmission costs of these elements decrease to a certain proportion simultaneously or switches to HGP when the unit transmission cost of HGP decreases more than that of NGP. The complementary transmission mode of NGP and UHV is the optimal mode for inter-provincial transmission, and the HGP can be put into use for inter-provincial transmission only when the unit transmission cost of which is reduced to less than 25%. Jilin is the key node in the NGP network, and Tibet and Gansu are the key nodes in UHV network, and the participation or absence of which will have significant impact on the renewable hydrogen transmission system. Only minor adjustments to the transmission technical parameters of NGP or HGP can promote the qualitative overflight of the optimal transmission volume of them so as to achieve the target optimization at the minimum cost.     

Feasibility analysis of blending hydrogen into natural gas networks

Hydrogen fuel has the potential to mitigate the negative effects of greenhouse gases and climate change by neutralizing carbon emissions. Transporting large volume of hydrogen through pipelines needs hydrogen-specific infrastructure such as hydrogen pipelines and compressors, which can become an economic barrier. Thus, the idea of blending hydrogen into existing natural gas pipelines arises as a potential alternative for transporting hydrogen economically by using existing natural gas grids. However, there are several potential issues that must be considered when blending hydrogen into natural gas pipelines. Hydrogen has different physical and chemical properties from natural gas, including a smaller size and lighter weight, which require higher operating pressures to deliver the same amount of energy as natural gas. Additionally, hydrogen's small molecular size and lower ignition energy make it more likely to permeate through pipeline materials and seals, leading to degradation, and its wider flammability limits make it a safety hazard when leaks occur. In this study, we investigate these potential issues through simulation and technical surveys. We develop a gas hydraulic model to simulate the physical characteristics of a transmission and a distribution pipeline. This model is used throughout the study to visualize the potential impacts of switching from natural gas to hydrogen, and to investigate potential problems and solutions. Furthermore, we develop a Real-Time Transient Model (RTTM) to address the compatibility of current computational pipeline monitoring (CPM) based leak detection methods with blended hydrogen. Finally, we suggest the optimal hydrogen concentration for this model, and investigate the amount of carbon reduction that could be achieved, while considering the energy needs of the system.     

Operation optimization for gas-electric integrated energy system with hydrogen storage module

Hydrogen is gradually becoming one of the important carriers of global energy transformation and development. To analyze the influence of the hydrogen storage module (HSM) on the operation of the gas-electricity integrated energy system, a comprehensive energy system model consisting of wind turbines, gas turbines, power-to-hydrogen (P2H) unit, and HSM is proposed in this paper. The model couples the natural gas network and power grid bidirectionally, and establishes a mixed integer nonlinear programming problem considering HSM. The linearization model of the natural gas pipeline flow equation and the generator set equation is constructed by piecewise linearization method to improve the efficiency of solving the model. And the energy flow distribution in the gas-electricity integrated energy system is finally solved. In Model 1, compared with not considering the installation of P2H units, when the hydrogen doping ratio is 10%, the operating cost can be reduced by 6.63%, and the wind curtailment cost can be reduced by 17.54%, and the carbon emission can be reduced by 298.7 tons. The optimization results of Model 2 reveal that compared with no HSM, the system operating cost is reduced by 5.96%, the hydrogen content level in the natural gas pipeline network is increased by 42.12%, and the carbon emission of the system is reduced by 117.6 tons, and the fluctuation of wind power is suppressed. This study demonstrates the feasibility of large-scale absorption of renewable energy through HSM.     

Recommendations on X80 steel for the design of hydrogen gas transmission pipelines

By limiting the pipes thickness necessary to sustain high pressure, high-strength steels could prove economically relevant for transmitting large gas quantities in pipelines on long distance. Up to now, the existing hydrogen pipelines have used lower-strength steels to avoid any hydrogen embrittlement. The CATHY-GDF project, funded by the French National Agency for Research, explored the ability of an industrial X80 grade for the transmission of pressurized hydrogen gas in large diameter pipelines. This project has developed experimental facilities to test the material under hydrogen gas pressure. Indeed, tensile, toughness, crack propagation and disc rupture tests have been performed. From these results, the effect of hydrogen pressure on the size of some critical defects has been analyzed allowing proposing some recommendations on the design of X80 pipe for hydrogen transport. Cost of Hydrogen transport could be several times higher than natural gas one for a given energy amount. Moreover, building hydrogen pipeline using high grade steels could induce a 10 to 40% cost benefit instead of using low grade steels, despite their lower hydrogen susceptibility.     

An MILP model for the reformation of natural gas pipeline networks with hydrogen injection

A mixed integer linear programming (MILP) model is proposed for the reformation of natural gas pipelines. The model is based on the topology of existing pipelines, the load and pressure at each node and the design factors of the region and minimizes the annual substitution depreciation cost of pipelines, the annual construction depreciation cost of compressor stations and the operating cost of existing compressor stations. Considering the nonlinear pressure drop equations, the model is linearized by a piecewise method and solved by the Gurobi optimizer. Two cases of natural gas pipeline networks with hydrogen injection are presented. Several adjustments are applied to the original natural gas pipeline network to ensure that our design scheme can satisfy the safety and economic requirements of gas transportation. Thus, this work is likely to serve as a decision-support tool for the reformation of pipeline networks with hydrogen injection.     

Assessment of hydrogen supply solutions for hydrogen fueling station: A Shanghai case study

Shanghai is one of the fastest growing regions of hydrogen energy in China. This paper researched feasible hydrogen sources in both internal and external Shanghai. This study comes up 9 hydrogen production methods and 6 transportation routes, ultimately forms 12 hydrogen supply solutions according to local conditions. The total cost in each solution is estimated including processes of hydrogen production, treatments, storage and transportation based on different transport distance. The results indicate that hydrogen supply cost is above 50 CNY/kgH₂ for external hydrogen sources after long-distance transportation to Shanghai, such as hydrogen production from coal in Inner Mongolia and from renewables in Hebei. The total cost of on-site hydrogen production from natural gas can be controlled under 40 CNY/kgH₂. When the price of wind power reduces to 0.5 CNY/kWh, hydrogen production from offshore wind power cooperating with hydrogen pipeline network has the greatest development potential for Shanghai hydrogen supply.     

Evaluation of hydrogen concentration effect on the natural gas properties and flow performance

The natural gas flowing through transmission pipeline is impure and has a wide range of non-hydrocarbons components at different concentrations like hydrogen. The presence of hydrogen in the natural gas mixture influences its properties and flow performance. The effect of hydrogen concentration on the natural gas flowing through a transportation pipeline has not been adequately investigated and widely comprehended. In this paper, several mixtures flow through pipeline include typical natural gas and hydrogen at different concentrations up to 10% are evaluated to demonstrate their impact on the flow assurance and the natural gas properties. The string Ruswil – Griespass part from the Transitgas project with 94 km length is simulated applying Aspen Hysys Version 9 and validated using Aspen Plus. The simulation specifications were 1.228 1 10⁶ kg/h mass flowrate, 1200 mm and 1164 mm the outer and inner diameters, and 75 bar and 29.4 °C operating pressure, and temperature. The effect of different hydrogen concentrations has been examined and the differences from the typical mixture are estimated. The results show that the presence of hydrogen in the natural gas mixture reduces its density, 10% hydrogen content records 11.78% reduction in the density of typical natural gas. Interestingly, it has been found that up to 2% of hydrogen concentration turns in elevating the viscosity of the typical natural gas while the viscosity decreases at the point that hydrogen content increases above 2%. In addition, the pressure losses over the transmission pipeline increases due to the presence of hydrogen, 10% hydrogen concentration turns in 5.39% increase in the pressure drop of the natural gas mixture. Also, the temperature drop across the pipeline decreases as the hydrogen concentration increases; 10% hydrogen content can result in a 6.14% reduction in the temperature drop across the pipeline. As well as, the findings prove that the hydrogen strongly impacts the phase envelope by changing from size symmetric to size asymmetric diagram. The effect of pipeline elevations has been investigated by changing the elevation up to 25 m uphill and 25 m downhill. The results state that increase the pipeline elevation turns in increasing the pressure losses over the pipeline length. Along with this, the results illustrate that the presence of hydrogen in the mixture elevates the critical pressure and reduces the critical temperature.     

Solar hydrogen from North Africa to Europe through greenstream: A simulation-based analysis of blending scenarios and production plant sizing

Blending green hydrogen within the gas infrastructure is seen as the first move towards Europe's climate neutrality by 2050. Especially, Europe and North African have privileged role in energy cooperation sharing a woven and complex set of natural resources, knowledge, infrastructure, clear goals towards sustainable development. Developing common projects about hydrogen can mutually help both Europe and North Africa to achieve more sustainable, reliable and modern energy systems.This paper simulates the Greenstream gas corridor (connecting Libya to Italy) under increasing hydrogen blending scenarios using a transient and multi-component fluid-dynamic model of the gas transmission system.The additional compression energy required and the compressors’ operating hours are evaluated under the hypothesis that the energy content of the transported gas is maintained. The hydrogen profiles needed to generate the blends are obtained and used to optimally size a photovoltaic-powered electrolysis system, minimizing the compressed hydrogen storage.The results indicate that the additional energy costs of transporting hydrogen blends are up to 32.5% higher than natural gas transport, while negligibly impacting the overall efficiency of energy transport. The mismatch between solar hydrogen production and pipeline receiving potential highlights a challenge to be tackled to boost intersectoral integration.     

Dynamic modeling and characteristic analysis of natural gas network with hydrogen injections

With the transformation of energy structure, the proportion of renewable energy in the power grid continues to increase. However, the power grid's capacity to absorb renewable is limited. In view of this, converting the excess renewable energy into hydrogen and injecting it into natural gas network for transportation can not only increase the absorption capacity of renewable energy but also reduce the transportation cost of hydrogen. While this can lead to the problem that hydrogen injection will make the dynamic characteristics of the pipeline more complicated, and hydrogen embrittlement of pipeline may occur. It is of great significance to simulate the dynamic characteristics of gas pipeline with hydrogen injection, especially the hydrogen mixture ratio. In this paper, the cell segmentation method is used to solve each natural gas pipeline model, the gas components are recalculated in each cell and the parameters of partial differential equation are updated. Additionally, the dynamic simulation model of natural gas network with hydrogen injections is established. Simulation results show that for a single pipeline, when the inlet hydrogen ratio changes, whether or not hydrogen injection has little influence on the pressure and flow. The propagation speed of hydrogen concentration is far less than that of the pressure and flow rate, and it takes about 1.2 × 10⁵ s for the 100 km pipeline hydrogen ratio to reach the steady state again.     

Effect of hydrogen blending on the energy capacity of natural gas transmission networks

In this paper the effects of hydrogen on the transport of natural gas-hydrogen mixture in a high-pressure natural gas transmission system are investigated in detail. Our research focuses on the decrease in transferable energy content under identical operating conditions as hydrogen is blended in the gas transmission network. Based on the extensive literature review the outstanding challenges and key questions of using hydrogen in the natural gas system are introduced. In our research the transmissible energy factor - TEF - is defined that quantifies the relative energy capacity of the pipeline caused by hydrogen blending. A new equation is proposed in this paper to find the value of TEF at specific pressure and temperature conditions for different hydrogen concentrations. This practical equation helps the natural gas system operators in the decision-making process when hydrogen emerges in the gas transmission system. In this paper the change of the compression power requirement, which increases significantly with hydrogen blending, is investigated in detail.     

氢气管输技术研究进展

利用现有“全国一张网”的天然气管道设施,将氢气掺入天然气管道输送,可有效解决中国氢气规模化输送难题。该文综述目前关于氢气管道输送的研究成果,总结氢气管道建设现状;分析输氢工艺安全性,阐述管线泄漏的危害性及防护措施,分别讨论高压输送管道、中低压配送管道和管道焊缝的相容性;归纳目前的燃气互换性方法及设备适应性。指出了目前氢气管输面临的问题：掺氢比例等参数对氢气渗透、聚集、泄漏、喷射火灾等安全问题的影响尚不明确;氢气与典型管材的相容性研究不足;缺少纯氢和掺氢管道输送技术相关标准规范体系。     

Experimental study of hydrogen explosion in repeated pipe congestion – Part 2: Effects of increase in hydrogen concentration in hydrogen-methane-air mixture

Hydrogen is seen as an important energy carrier for the future which offers carbon free emissions. At present it is mainly used in refueling hydrogen fuel cell cars. However, it can also be used together with natural gas in existing gas fired equipment with the benefit of lower carbon emissions. This can be achieved by introducing hydrogen into existing natural gas pipelines. These pipelines are designed, constructed and operated to safely transport natural gas, which is mostly methane. Because hydrogen has significantly different physical and chemical properties than natural gas, any addition of hydrogen my adversely affect the integrity of the pipeline network, increasing the likelihood and consequences of an accidental leak. Since it increases the likelihood and consequences of an accidental leak, it increases the risk of explosion. In order to address various safety issues related to addition of hydrogen in to a natural gas pipeline a EU project NATURALHY was introduced. A major objective of the NATURALHY project was to identify how much hydrogen could be introduced into the natural gas pipeline network. Such that it does not adversely impact the safety of the pipeline network and significantly increase the risk to the public. This paper reports experimental work conducted to measure the explosion overpressure generated by ignition of hydrogen-methane-air mixture in a highly congested region consisting of interconnected pipes. The composition of the methane/hydrogen mixture used was varied from 0% hydrogen (100% methane) to 100% hydrogen (0% methane) to understand its effect on generated explosion overpressure. It was observed that the maximum overpressures generated by methane-hydrogen mixtures with 25% (by volume) or less hydrogen content are not likely to be significantly greater than those generated by methane alone. Therefore, it can be concluded that the addition of less than 25% by volume of hydrogen into pipeline networks would not significantly increase the risk of explosion.     

The experiment study to assess the impact of hydrogen blended natural gas on the tensile properties and damage mechanism of X80 pipeline steel

Environmental hydrogen embrittlement has become a non-negligible problem in the hydrogen blended natural gas transportation. To qualitatively study the degradation mechanism of X80 steel used in the natural gas pipelines, the slow strain tensile experiments are carried out in this work. The nitrogen and hydrogen are adopted to simulate the hydrogen blended natural gas to explore the tensile properties of X80 steel. According to the volume proportion of hydrogen, the test atmospheres are divided into the reference atmosphere and the hydrogen-contained atmospheres of 1%, 2.2% and 5%. The tensile experiments of the smooth and notched specimens are conducted in the above gas atmospheres. Mechanical properties and fracture morphologies after stretching are further analyzed. The results show that the hydrogen blended natural gas has little effect on the tensile and yield strengths. Distinguished from the hydrogen volume proportion of 1% and 2.2%, with the increase of hydrogen proportion, the effect of hydrogen on mechanical properties of specimens increases significantly. Moreover, the deteriorated mechanical properties of notched specimens are more seriously than those of smooth specimens. This work provides the basis for safe hydrogen proportion for X80 pipeline steel when transporting hydrogen blended natural gas.     

Leakage and diffusion behavior of a buried pipeline of hydrogen-blended natural gas

Buried pipelines are one method of conservation transfer for widely used gases such as natural gas and hydrogen. The safety of these pipelines is of great importance because of the potential leakage risks posed by the flammable gas and the special properties of the hydrogen mixture. Estimating the leakage behavior and quantifying the diffusion range outside the pipeline are important but challenging goals due to the hydrogen mixture and presence of soil. This study provides essential information about the diffusion behavior and concentration distribution of underground hydrogen and natural gas mixture leakages. Therefore, a large-scale experimental system was developed to simulate high-pressure leaks of hydrogen mixture natural gas from small holes in three different directions from a pipeline buried in soil. The diffusion of hydrogen-doped natural gas in soil was experimentally measured under different conditions, such as different hydrogen mixture ratios, release pressures, and leakage directions. The experimental results verified the applicability of the gas leakage mass flow model, with an error of 6.85%. When a larger proportion of a single component was present in the hydrogen-doped natural gas, the leakage pressure showed a greater diffusion range. In addition, the diffusion range of hydrogen-doped natural gas in the leakage direction was larger at 3 o'clock than that at 12 o'clock. The hydrogen blend carried methane and diffused, which shortened the methane saturation time. Moreover, a quantitative relationship between the concentration of hydrogen-doped natural gas and the diffusion distance over which the hydrogen-doped natural gas reached the lower limit of the explosion was obtained by quantitative analysis of the experimental data.     

Techno-economic analysis of PSA separation for hydrogen/natural gas mixtures at hydrogen refuelling stations

Logistics of hydrogen is one of the bottlenecks of a hydrogen economy. In this study, a pressure swing adsorption (PSA) system is proposed for the separation of hydrogen from natural gas, co-transported in the natural gas grid. The economic feasibility of hydrogen supplied by a PSA system at a refuelling station is assessed and compared with other alternatives. The adsorbent material is key to the design of a PSA system, which determines the operation performance and cost. It is concluded that a refuelling station with hydrogen supplied by a PSA system is economically feasible. The final hydrogen price including hydrogen supply, compression, storage, and dispensing is compared with two other hydrogen supply methods: on-site electrolysis and tube-trailer transported hydrogen. Currently, PSA supplied hydrogen is a more economical option. On-site electrolysis can become a more economical option in the future with improved cell efficiencies and reduced electricity prices. Tube-trailer transported hydrogen is highly influenced by the distance travelled. The findings of this study will help with more efficient distribution of hydrogen.     

A multi-objective model for optimizing hydrogen injected-high pressure natural gas pipeline networks

The paper develops a statistical model for optimizing the Hydrogen-injected Natural gas (H-NG) high-pressure pipeline network. Gas hydrodynamic principles are utilized to construct the pipeline and compressor station model. The model developed is implemented on a pipeline grid that is supposed to carry Hydrogen as an energy carrier in a natural gas-carrying pipeline. The paper aims to optimize different objectives using ant colony optimization (ACO). The first objective includes a single objective optimization problem that evaluates the maximum permissible hydrogen amounts blended with natural gas (NG) for a set of pipeline constraints. We also evaluated the variations in operational variables on injecting Hydrogen into the natural gas pipeline networks at varying fractions. The study further develops a multi-objective optimization model that includes bi-objective and tri-objective problems and is optimized using ACO. Traditional studies have focused on single-objective optimization with minimal bi-objective issues. In addition, none of the earlier research has shown the effect of introducing Hydrogen to the NG network using tri-objective function evaluations. The bi-objective and tri-objective functions help evaluate the effect of injecting Hydrogen on different operational parameters. The study further attempts to fill the gap by detailing the modelling equations implemented through a bi-objective and tri-objective function for the H-NG pipeline network and optimized through ACO. Pareto fronts that show the tradeoff between the different objectives for the multi-objective problem have been generated. The primary objective of the bi-objective and tri-objective optimization problems is maximizing hydrogen mole percent in natural gas. The other objective chosen is minimizing compressor fuel consumption and maximizing delivery pressure, throughput, and power delivered at the delivery station. The findings will serve as a roadmap for pipeline operators interested in repurposing natural gas pipeline networks to transport hydrogen and natural gas blend (H-NG) and seeking to reduce carbon intensity per unit of energy-delivered fuel.     

Optimal dispatch of HCNG penetrated integrated energy system based on modelling of HCNG process

Hydrogen is injected into the existing natural gas network to form hydrogen-rich compressed natural gas (HCNG), effectively addressing the high cost of hydrogen transmission. However, the traditional IES model cannot be used due to the hydrogen injection's effect on gas properties and the vague characteristics of the transport and separation processes. Therefore, this paper proposes an HCNG penetrated integrated energy system (HPIES) optimal dispatching method by comprehensively modelling the injection, transmission, and separation processes of HCNG. An HCNG mass flow rate model considering variable mixing ratio and unknown beginning flow direction is developed to describe the effect of hydrogen injection. Furthermore, the hydrogen separation model is established by introducing a combined membrane and pressure swing adsorption separation process. The tightening McCormick algorithm is proposed to solve quickly HPIES optimal dispatch problem with an acceptable feasibility check. Finally, case studies on the HPIES consisting of IEEE 39-bus power system and 20-node natural gas system validate the effectiveness of the algorithm and model. The results show that the average error is 0.031% for the bilinear term constraint.     

From the perspective of new technology of blending hydrogen into natural gas pipelines transmission: Mechanism,experimental study,and suggestions for further work of hydrogen embrittlement in high-strength pipeline steels

Blending hydrogen into high-strength pipeline steels for high-pressure transmission may cause materials' hydrogen embrittlement (HE) failure. Although the hydrogen-induced failure of metallic materials has been studied for a long time, the process of hydrogen into the materials, hydrogen-induced delayed failure, and dynamic mechanisms of high-strength pipeline steels under high pressure have not been fully understood. This paper aims to provide a detailed review of the latest research on the hydrogen-induced failure of high-strength pipeline steels in hydrogen-blended natural gas transmission. First, introduced the typical hydrogen blending natural gas pipeline transmission projects and their associated research conclusions. Then, described the physical process of the HE in high-strength pipeline steels and the principle, development, and latest research progress of typical hydrogen embrittlement mechanisms in detail. Third, reviewed the research methods and progress of experimental and theoretical simulations for the HE in steels, including hydrogen permeation (HP) experiments, hydrogen content measurements, hydrogen distribution detection, mechanical property tests, and molecular dynamics simulations. The shortcomings of existing experimental and theoretical simulation methods in the hydrogen-induced analysis of high-strength natural gas pipeline steels under high pressure are discussed. Finally, the future research directions and challenges of this problem are proposed from three aspects: the multimechanism synergy mechanism, the improvement of experimental methods, and the establishment of a new interatomic multiscale model.