Phosphorus-doping induced electronic modulation of CoS2–MoS2 hollow spheres on MoO2 film-Mo foil for synergistically boosting alkaline hydrogen evolution reaction

Combination of anionic doping and multicomponent synergism are effective approach to improve the performance of electrocatalysts toward hydrogen evolution reaction (HER) process. Herein, P-doped CoS₂–MoS₂ hollow spheres assembled by countless sheets on oxidized Mo foil (P–CoS₂/MoS₂/MoO₂) was synthesized by hydrothermal and phosphorization process. The unique hollow structure with countless sheets as wall endows more accessible active sites, fast electron/mass transport and high conductivity. P-doping could redistribute the local charge density and optimize the surface charge state to improve the intrinsic activity and accelerate reaction kinetics. The optimized P–CoS₂/MoS₂/MoO₂ exhibits an outstanding HER performance with an overpotential of 85 mV to reach 10 mA cm⁻², a small Tafel slope of 84.6 mV dec⁻¹, superior intrinsic HER activity and robust durability under alkaline solution. This work proposed a feasible strategy to build the hollow, heterostructured and binder-free electrode in renewable energy application.     

Graphene confined MoS2 particles for accelerated electrocatalytic hydrogen evolution

MoS₂ is a promising noble-metal-free electrocatalyst for the hydrogen evolution reaction. Extensive trials have been carried out to increase its low electrical conductivity and insufficient active sites. Here, a remarkable electrocatalyst for hydrogen evolution is developed based on the in-situ preparation of MoS₂ confined in graphene nanosheets. Graphene effectively controls the growth of MoS₂ and immensely increases the conductivity and structural stability of the composite materials. Remarkably, because of the plentiful active sites, sufficient electrical contact and transport, MoS₂ particles confined in graphene nanosheets exhibit an onset overpotential as small as 32 mV, an overpotential approaching 132 mV at 10 mA cm⁻², and a low Tafel slope of 45 mV dec⁻¹. This work presents a reasonable architecture for practical applications in efficient electrocatalytic H₂ generation.     

Self-standing and efficient bifunctional electrocatalyst for overall water splitting under alkaline media enabled by Mo1-xCoxS2 nanosheets anchored on carbon fiber paper

The layered MoS₂ nanostructures have been widely used in the electrochemical hydrogen evolution reaction (HER), but rarely applied in overall water splitting application for their ignorable oxygen evolution reaction (OER) activity. To address this issue, a novel self-standing and bifunctional electrocatalyst, consisting of Co-doped MoS₂ nanosheets anchored on carbon fiber paper, has been prepared via hydrothermal method. Taking advantage of conductive substrate of carbon fiber paper, sufficient-exposed active edges of MoS₂ sheets, and metallic character caused by Co-doping, our electrode exhibits high-efficient bifunctional activities for the overall water splitting in alkaline electrolyte (1 M KOH), which can produce a current density of 20 mA cm⁻² at an overpotential of 197 mV for HER and 235 mV for OER.     

Three-dimensional interconnected MoS2 nanosheets on industrial 316L stainless steel mesh as an efficient hydrogen evolution electrode

The development of inexpensive and competent electrocatalysts for high-efficiency hydrogen evolution reaction (HER) has been greatly significant to realize hydrogen production in large scale. In this paper, we selected the inexpensive and commercially accessible stainless steel as the conductive substrate for loading MoS₂ as a cathode for efficient HER under alkaline condition. Interconnected MoS₂ nanosheets were grown uniformly on 316-type stainless steel meshes with different mesh numbers via a facile hydrothermal way. And the optimized MoS₂/stainless steel electrocatalysts exhibited superior electrocatalytic performance for HER with a low overpotential of 160 mV at 10 mA cm⁻² and a small Tafel slope of 61 mV dec⁻¹ in 1 M KOH. Systematic study of the electrochemical properties was performed on the MoS₂/stainless steel electrocatalysts in comparison with the commonly used carbon cloth to better comprehend the origin of the superior HER performance as well as stability. By collaborative optimization of MoS₂ nanosheets and the cheap stainless steel substrate, the interconnected MoS₂ nanosheets on stainless steel provide an alternative strategy for the development of efficient and robust HER catalysts in strong alkaline environment.     

Nano-pom-pom multiphasic MoS2 grown on carbonized wood as electrode for efficient hydrogen evolution in acidic and alkaline media

Molybdenum disulfide (MoS₂), attracts great attention in hydrogen evolution reaction (HER) field, however, low catalytic activity sites and poor conductivity still limit its further application. In this study, an efficient hydrogen evolution electrode with nano-pom-pom multiphasic MoS₂ uniformly grew on porous carbonized wood (NP MoS₂/CW) was developed. Interestingly, the nano-pom-pom are stacked from sheets of MoS₂. Fully exposed active edges of nano-pom-pom MoS₂ and high excellent electrical conductivity of carbonized wood enhance collectively electrocatalytic performance for HER. Specifically, the NP MoS₂/CW electrode requires an overpotential of 109.5 mV and 305 mV to achieve the current density of 10 mA cm⁻² and 400 mA cm⁻², respectively (0.5 M H₂SO₄). NP MoS₂/CW has excellent electrocatalytic performance and stability in acidic and alkaline media due to the perfect combination of NP MoS₂ unique nanostructure and the unique properties of CW. Therefore, the present work provides a promising strategy into the rational development and utilization of MoS₂ for the development of hydrogen evolution.     

Fabrication of phosphorus-mediated MoS2 nanosheets on carbon cloth for enhanced hydrogen evolution reaction

Molybdenum sulfide (MoS₂) as a graphene-like sheet material has attracted wide attention owing to the potential for hydrogen evolution reaction (HER). However, the large-scale application of MoS₂ is still difficult due to the inherent poor conductivity and insufficient active edge sites. Herein, we develop a simple method to grow P-doped MoS₂ nanosheets on carbon cloth for high efficiency HER. The 2D carbon cloth can prevent the stacking of MoS₂ nanosheets and improve the conductivity with the doping of P atoms. As a result, the P–MoS₂/CC-300 shows the excellent electrocatalytic activity with an overpotential of 81 mV at 10 mA cm^?2 and the lower Tafel slope of 98 mV/dec. Furthermore, it also shows the good electrocatalytic durability for 15 h. This work provides an opportunity for the design of excellent and robust MoS₂-based catalyst via structural engineering and doping method.     

Solvothermal synthesis of oxygen-incorporated MoS2-x nanosheets with abundant undercoordinated Mo for efficient hydrogen evolution

Activating the inert basal planes of layered molybdenum disulfide (MoS₂) is critical to deliver its high hydrogen evolution reaction (HER) efficiency. Herein, oxygen-incorparated MoS_x with abundant undercoordinated Mo atoms is fabricated by a facile solvothermal procedure, which realizes synergistically structural and electronic regulations of MoS₂ inert basal planes. Experiment results reveal that oxygen incoparation can effectively modulate the electronic structure and further optimize the intrinsic conductivity, while the defect-rich structure with abundant undercoordinated Mo atoms increases the number of active sites. Moreover, the influence of solvothermal temperature on activity of MoS_2-x is also investigated. The achieved MoS_x electrocatalyst prepared at 220 °C exhibits a superior activity for HER with a low overpotential of 191 mV at 10 mA cm⁻², a small Tafel slope of 67 mV dec⁻¹, and an excellent stability due to the largest surface area and superior conductivity.     

Engineering of molybdenum sulfide nanostructures towards efficient electrocatalytic hydrogen evolution

Water splitting is an appealing way of producing hydrogen fuel, which requires efficient and affordable electrode materials to make the overall process viable. In the last couple years, abundant transition metals (and their compounds and hybrids) attracted ever-growing attention as the alternatives of noble metals. Particularly the layered transition metal dichalcogenide (TMDs) are interesting with their stability and promising electrocatalytic performance for hydrogen evolution reaction (HER). However, the neat TMDs are often poor in terms of the abundance of catalytically active sites and electrical conductivity, which limit their application potential significantly. Herein, as a proof-of-concept, we report on the design of a high-performance electrocatalyst system formed by the decoration of ultrasmall molybdenum sulfide (MoS₂) nanosheets on carbon nanotubes (CNTs). The ultrasmall MoS₂ nanosheets provide distorted lattice, confined size and rich defects, which endows the resulting electrocatalysts (MoS₂/CNT) with abundant active sites. The CNTs, on the other hand, serve as the conductive net for ensuring electrocatalytic performance. As a result, the hybrid electrocatalyst exhibits excellent electrocatalytic performance for HER, achieving a large current density of 100 mA cm⁻² at overpotential of only 281 mV and a small Tafel slope of 43.6 mV dec⁻¹ along with a decent stability. Our results are of high interest for electrocatalyst technologists as well as hydrogen fuel researchers.     

Atomic-scale intercalation of amorphous MoS2 nanoparticles into N-doped carbon as a highly efficient electrocatalyst for hydrogen evolution reaction

The hydrogen evolution reaction (HER) properties of the catalysts are significantly dependent on their microscopic structure. Interfacial engineering at the atomic level is the main approach to design high performance of electrocatalysts. Herein, an interfacial modulation strategy is proposed to fabricate monolayer amorphous MoS₂ nanoparticles with an average of 3.5 nm in diameter stuck in multilayer N-doped carbon (MoS₂/NC), boosting a high HER activity. The amorphous MoS₂ could provide more edge active sites and NC layers endow the fast electron transfer. The XPS, Raman spectra and density functional theory (DFT) calculations reveal that the C–S bond in MoS₂/NC provides the fast electron transfer and decreases H binding energy. Benefiting the unique sandwiched structure, the MoS₂/NC boosts a low overpotential of 152.6 mV at a current density of 10 mA cm⁻², a small Tafel slope of 60.3 mV dec⁻¹, and outstanding long-term stability with 97.3% retention for over 24 h. This strategy provides a new opportunity and development of interfacial engineering for turning intrinsic catalytic activity for water splitting.     

Defective-MoS2/rGO heterostructures with conductive 1T phase MoS2 for efficient hydrogen evolution reaction

As a two-dimensional material, molybdenum disulfide (MoS₂) exhibits great potential to replace metal platinum-based catalysts for hydrogen evolution reaction (HER). However, poor electrical conductivity and low intrinsic activity of MoS₂ limit its application in electrocatalysis. Herein, we prepare a defective-MoS₂/rGO heterostructures material containing 1T phase MoS₂ and evaluate its HER performance. The experimental results shown that defective-MoS₂/rGO heterostructures exhibits outstanding HER performance with a low overpotential at 154.77 mV affording the current density of 10 mA cm^?2 and small Tafel slope of 56.17 mV dec^?1. The unique HER performance of as-prepared catalyst can be attributed to the presence of 1T phase MoS₂, which has more active sites and higher intrinsic conductivity. While the defects of as-prepared catalyst fully expose the active sites and further improve catalytic activity. Furthermore, the interaction between MoS₂ and rGO heterostructures can accelerate electron transfer kinetics, and effectively ensure that the obtained catalyst displays excellent conductivity and structural stability, so the as-prepared catalyst also exhibits outstanding electrochemical cycling stability. This work provides a feasible and effective method for preparation of defective-MoS₂/rGO heterostructures, which also supplies a new strategy for designing of highly active and conductive catalysts for HER.     

Preparation of ultrathin molybdenum disulfide dispersed on graphene via cobalt doping: A bifunctional catalyst for hydrogen and oxygen evolution reaction

The development of highly active and low-cost catalysts for hydrogen evolution reaction (HER) is significant for the development of clean and renewable energy research. Owing to the low H adsorption free energy, molybdenum disulfide (MoS₂) is regarded as a promising candidate for HER, but it shows low activity for oxygen evolution reaction (OER). Herein, graphene-supported cobalt-doped ultrathin molybdenum disulfide (Co–MoS₂/rGO) was synthesized via a one-pot hydrothermal method. The obtained hybrids modified electrode exhibits a high HER catalytic activity with a low overpotential of 147 mV at the current density of 10 mA cm⁻², a small Tafel slope of 49.5 mV dec⁻¹, as well as good electrochemical stability in acidic electrolyte. Meanwhile, the catalyst shows remarkable OER activity with a low overpotential of 347 mV at 10 mA cm⁻². The superior activity is ascribed not only to the high conductivity originated from the reduced graphene, but also to the synergistic effect between MoS₂ and cobalt.     

Ru–MoS2@PPy hollow nanowire as an ultra-stable catalyst for alkaline hydrogen evolution reaction

Electrocatalytic hydrogen evolution reaction (HER) is one of the green and effective method to produce clean hydrogen energy. However, the development of non-Pt HER catalysts with excellent catalytic activity and long-term stability still remains a great challenge. Herein, a vertically aligned core-shell structure material with hollow polypyrrole (PPy) nanowire as a core and Ru-doped MoS₂ (Ru–MoS₂) nanosheets as a shell is firstly reported as a highly efficient and ultra-stable catalyst for HER in alkaline solutions. Results indicate that Ru–MoS₂@PPy catalyst demands a low overpotential of 37 mV at 10 mA cm^?2. In addition, the overpotential at 100 mA cm^?2 is 157 mV and it is almost unchanged after 40,000 cyclic voltammetry cycles. The existence of PPy core not only ensures the vertical growth of MoS₂ nanosheets to expose more edge sites, but also promotes the rapid transfer of electrons, contributing to the improvement of catalytic activity. More importantly, the strong interface interaction between MoS₂ and PPy prevents the collapse of the vertical structure of MoS₂ sheets in the electrocatalytic process and greatly enhances the stability of catalysts, which offers an effective strategy to design and synthesize the HER catalysts with superior catalytic stability.     

Ultrathin MoS2 nanosheets in situ grown on rich defective Ni0.96S as heterojunction bifunctional electrocatalysts for alkaline water electrolysis

Developing earth-abundant and highly active bifunctional electrocatalysts are critical to advance sustainable hydrogen production via alkaline water electrolysis but still challenging. Herein, heterojunction hybrid of ultrathin molybdenum disulfide (MoS₂) nanosheets and non-stoichiometric nickel sulfide (Ni_0.96S) is in situ prepared via a facile one-step hydrothermal strategy, followed by annealing at 400 °C for 1 h. Microstructural analysis shows that the hybrid is composed of intimate heterojunction interfaces between Ni_0.96S and MoS₂ with exposed active edges provided by ultrathin MoS₂ nanosheets and rich defects provided by non-stoichiometric Ni_0.96S nanocrystals. As expected, it is evaluated as bifunctional electrocatalysts to produce both hydrogen and oxygen via water electrolysis with a hydrogen evolution reaction (HER) overpotential of 104 mV at 10 mA cm⁻² and an oxygen evolution reaction (OER) overpotential of 266 mV at 20 mA cm⁻² under alkaline conditions, outperforming most current noble-metal-free electrocatalysts. This work provides a simple strategy toward the rational design of novel heterojunction electrocatalysts which would be a promising candidate for electrochemical overall water splitting.     

Synergy between in-situ immobilized MoS2 nanosheets and TiO2 nanotubes for efficient electrocatalytic hydrogen evolution

MoS₂ electrocatalyst exhibits a significant potential to substitute platinum in hydrogen evolution reaction (HER), but its immobilization on practical supports is still challenging. Herein, a facile hydrothermal method is developed for in-situ immobilizing MoS₂ nanosheets on titanium nanotubes (TNTs) support. Easy to mount electrodes with a uniform and dense layer of MoS₂ on TNTs are achieved. An overpotential of ?200 mV_RHE is ample to deliver ?10 mA/cm² from an acidic medium. This overpotential is much lower than those of the electrodes developed by drop-casting MoS₂ on TNTs, glassy carbon (274 mV), and in-situ immobilized on Ti foil (264 mV). The results revealed that the synergy between the in-situ immobilized MoS₂ and TNTs enhances the electrochemical surface area and the adsorption capacity of hydronium ions. The electronic interaction between MoS₂ and TNTs facilitates the mobility of electrons and reduces the charge transfer resistance at the electrode/electrolyte interface.     

Nanostructural Co–MoS2/NiCoS supported on reduced Graphene oxide as a high activity electrocatalyst for hydrogen evolution in alkaline media

There are many tremendous challenges to enhance the hydrogen evolution reaction (HER) activity of MoS₂. In this study, nanoflower-like Co–MoS₂/NiCoS structure supported on reduced Graphene Oxide (rGO) was rationally developed via a simple hydrothermal route, where the synergistic regulations of both interface structural and electronic conductivity were successfully presented by using controllable interface engineering and Co metal ions doped into MoS₂ nanosheets. Ascribed to the 3D flower-like nanostructure with massive active sites, the interface coupling effect between MoS₂ and Ni–Co–S phase, and Co-doped MoS₂ can modulate its surface electronic density. The optimal Co–MoS₂/NiCoS/rGO hybrid exhibits excellent HER activity in 1.0 M KOH, with a small overpotential (η₁₀, 84 mV) at 10 mA cm^?2 and a low Tafel slope (46 mV dec^?1), accompanied by good stability. This work provides an effective route to produce other electrocatalysts based on interface structure and electronic conductivity engineering for HER in the future.     

Ni3S2-MoSx nanorods grown on Ni foam as high-efficient electrocatalysts for overall water splitting

In order to solve the problem of large overpotential in water electrolysis for hydrogen production, transition metal sulfides are promising bifunctional electrocatalysts for hydrogen evolution reaction/oxygen evolution reaction that can significantly reduce overpotential. In this work, Ni₃S₂ and amorphous MoS_x nanorods directly grown on Ni foam (Ni₃S₂-MoS_x/NF) were prepared via one-step solvothermal process, which were used as a high-efficient electrocatalyst for overall water splitting. The Ni₃S₂-MoS_x/NF composite exhibits very low overpotentials of 65 and 312 mV to reach 10 mA cm⁻² and 50 mA cm⁻² in 1.0 M KOH for HER and OER, respectively. Besides, it exhibits a low Tafel slope (81 mV dec⁻¹ for HER, 103 mV dec⁻¹ for OER), high exchange current density (1.51 mA cm⁻² for HER, 0.26 mA cm⁻² for OER), and remarkable long-term cycle stability. This work provides new perspective for further the development of highly effective non-noble-metal materials in the energy field.     

High-performance bifunctional Fe-doped molybdenum oxide-based electrocatalysts with in situ grown epitaxial heterojunctions for overall water splitting

The design and development of low-cost, abundant reserves, high catalytic activity and durability bifunctional electrocatalysts for water splitting are of great significance. Here, simple hydrothermal and hydrogen reduction methods were used to fabricate a uniform distribution of Fe-doped MoO₂/MoO₃ sheets with abundant oxygen vacancies and heterojunctions on etched nickel foam (ENF). The Fe– MoO₂/MoO₃/ENF exhibited a small overpotential of 36 mV at 10 mA cm⁻² for hydrogen evolution reaction (HER), an excellent oxygen evolution reaction (OER) overpotential of 310 mV at 100 mA cm⁻² and outstanding stabilities of 95 h and 120 h for the HER and OER, respectively. As both cathode and anode catalysts, the heterogeneously structured Fe– MoO₂/MoO₃/ENF required a low cell voltage of 1.57 V at 10 mA cm⁻². Density functional theory (DFT) calculations show that Fe doping and MoO₂/MoO₃ heterojunctions can significantly reduce the band gap of the electrode, accelerate electron transport and reduce the potential barrier for water splitting. This work provides a new approach for designing metal ion doping and heterostructure formation that may be adapted to transition metal oxides for water splitting.     

Flower-like HEA/MoS2/MoP heterostructure based on interface engineering for efficient overall water splitting

The development of cheap, efficient, and active non-noble metal electrocatalysts for total hydrolysis of water (oxygen evolution reaction (OER) and hydrogen evolution reaction (HER)) is of great significance to promote the application of water splitting. Herein, a heterogeneous structured electrode based on FeAlCrMoV high-entropy alloy (HEA) was synthesized as a cost-effective electrocatalyst for hydrogen and oxygen evolution reactions in alkaline media. In combination of the interfacial synergistic effect and the high-entropy coordination environment, flower-like HEA/MoS₂/MoP exhibited the excellent HER and OER electrocatalytic performance. It showed a low overpotential of 230 mV at the current density of 10 mA cm⁻² for OER and 148 mV for HER in alkaline electrolyte, respectively. Furthermore, HEA/MoS₂/MoP as both anode and cathode also exhibited an overpotential of 1.60 V for overall water splitting. This work provides a new strategy for heterogeneous structure construction and overall water splitting based on high-entropy alloys.     

Advanced catalysts for hydrogen evolution reaction based on MoS2/NiCo2S4 heterostructures in Alkaline Media

There are great challenges to develop and fabricate a high performance, low-cost and stable non-platinum catalyst for hydrogen evolution reaction (HER). In our study, we firstly developed a simple method to successfully fabricate a new MoS₂/NiCo₂S₄ heterostructure by a two-step hydrothermal method, and studied the HER property of MoS₂/NiCo₂S₄, where the as-prepared NiCo-layered double hydroxide (NiCo-LDH) was used as the precursor of NiCo₂S₄. Benefitting from the prominent synergistic effect between NiCo₂S₄ and MoS₂, MoS₂ provided massive catalytic active edge sites, and NiCo₂S₄ enhanced the conductivity of the composite. As a result, the MoS₂/NiCo₂S₄ showed excellent HER catalytic activity, with a current of 10 mA cm⁻² at overpotential of 94 mV for HER and a low Tafel slope of 46 mV dec⁻¹, and good cycling stability in Alkaline Media. As well as, our work offered one promising high active and stable non-platinum catalyst for overall water splitting.     

MoS2-graphene-CuNi2S4 nanocomposite an efficient electrocatalyst for the hydrogen evolution reaction

We present a facile methodology for the synthesis of a novel 2D-MoS₂, graphene and CuNi₂S₄ (MoS₂-g-CuNi₂S₄) nanocomposite that displays highly efficient electrocatalytic activity towards the production of hydrogen. The intrinsic hydrogen evolution reaction (HER) activity of MoS₂ nanosheets was significantly enhanced by increasing the affinity of the active edge sites towards H⁺ adsorption using transition metal (Cu and Ni₂) dopants, whilst also increasing the edge sites exposure by anchoring them to a graphene framework. Detailed XPS analysis reveals a higher percentage of surface exposed S at 17.04%, of which 48.83% is metal bonded S (sulfide). The resultant MoS₂-g-CuNi₂S₄ nanocomposites are immobilized upon screen-printed electrodes (SPEs) and exhibit a HER onset potential and Tafel slope value of – 0.05 V (vs. RHE) and 29.3 mV dec⁻¹, respectively. These values are close to that of the polycrystalline Pt electrode (near zero potential (vs. RHE) and 21.0 mV dec⁻¹, respectively) and enhanced over a bare/unmodified SPE (– 0.43 V (vs. RHE) and 149.1 mV dec⁻¹, respectively). Given the efficient, HER activity displayed by the novel MoS₂-g-CuNi₂S₄/SPE electrochemical platform and the comparatively low associated cost of production for this nanocomposite, it has potential to be a cost-effective alternative to Pt within electrolyser technologies.