Facile synthesis of Ni5P4 nanosheets/nanoparticles for highly active and durable hydrogen evolution

It is essential to search highly active, steady and cheap non-noble electrocatalyst for hydrogen evolution reaction (HER). At present, nickel phosphides are extensively used in electrochemical hydrogen evolution due to its excellent stability and activity. Hence, we report a facile, effective and feasible strategy to synthesis of Ni₅P₄ nanosheets/nanoparticles structure on carbon cloth, which was fabricated by electroless nickel plating on carbon cloth followed via straightforward thermal phosphidation treatment with NaH₂PO₂ as phosphorus source. The as-prepared CC@Ni–P electrocatalyst exhibits HER activity with low overpotentials (93 mV vs. RHE) to attain current density 10 mA/cm² as well as small Tafel slope (58.2 mV/dec), which outperforms most nickel phosphides electrocatalysts. The excellent HER performance can be ascribed to the large electrochemically active surface area, and phosphorus-rich Ni₅P₄ phase can supply further bridges sites of Ni and P. Significantly, as-prepared CC@Ni–P catalyst electrode exhibits no apparent HER activity decay after continuous stability test. Beyond that, the approach can be readily used to fabricate large size (5 × 5 cm) nickel phosphide electrocatalyst with excellent HER performance, which may be conducive to the proton exchange membrane (PEM) water electrolyser applications in future. This work opens an effective way to construct excellent performance transition-metal phosphides for HER.     

Fabrication of robust CoP/Ni2P/CC composite for efficient hydrogen evolution reaction and the reduction of graphene oxide

Developing the novel catalysts with an excellent performance of hydrogen generation is essential to facilitate the application of hydrogen evolution reaction (HER). Herein, a heterostructured cobalt phosphide/nickel phosphide/carbon cloth (CoP/Ni₂P/CC) composite was fabricated via an interfacial engineering strategy to achieve the modification of CoP nanoleaf on Ni₂P nanosheet skeleton supported by carbon cloth. By virtue of the unique heterostructure, abundant exposing active sites and the synergistic coupling effect of CoP and Ni₂P nanoparticles, the elaborated CoP/Ni₂P/CC composite exhibits a robust catalytic property. Among fabricated composites, the optimal CoP/Ni₂P/CC-4 catalyst behaves an excellent HER performance at a wide pH range (overpotentials of 67, 71 and 95 mV to afford 10 mA cm^?2 in 0.5 M H₂SO₄, 1 M KOH and 1 M PBS, respectively). The HER current density of this composite shows a negligible degradation after continuous test for 24 h. Charmingly, the HER process of this catalyst was innovatively applied to reduce graphene oxide, and thus exploiting the fabrication route of reduced graphene oxide (rGO). We are sure that this work will provide a firm guideline for the exploitation of pH-universal HER catalysts and the exploration of HER application.     

Rational design of free-standing 3D Cu-doped NiS@Ni2P/NF nanosheet arrays for hydrogen evolution reaction

Using low cost and high efficiency non-precious bimetallic phosphosulphide as electrocatalyst for hydrogen evolution reaction (HER) is not only convenient but also environment-friendly for industrial production. Therefore, we propose a simple and efficient method to prepare a series of Cu-doped bimetallic phosphosulphide nanosheet arrays on nickel foam (CuNiS@Ni₂P/NF). The CuNiS@Ni₂P/NF exhibits the superior HER performance with appropriate doping amount of Cu. It just needs a potential of 144 mV to obtain the current density of 10 mA cm⁻² in 1.0 M KOH, which is smaller than that of CuNiS@Ni₂P/NF-0.25 (206 mV) and CuNiS@Ni₂P/NF-0.125 (219 mV). The excellent HER performance of CuNiS@Ni₂P/NF nanosheet arrays can be ascribed to: (i) the moderate Cu-doped effectively optimized the electronic structure and morphology of the electrocatalyst; (ii) typical nanosheet arrays structures exposing more active sites; (iii) the high immanent activity excited by the multi-component synergy.     

In-situ synthesis of porous Ni2P nanosheets for efficient and stable hydrogen evolution reaction

The design and development of highly efficient and stable non-noble metal electrocatalysts for hydrogen evolution reaction (HER) have attracted increasing attention. However, some key issues related to large overpotential, high cost and poor stability at high current density still remains challenging. In this work, we report a facile in-situ integration strategy of porous Ni₂P nanosheet catalysts on 3D Ni foam framework (PNi₂P/NF) for efficient and stable HER in alkaline medium. The two-step method can creates high density of ultra-thin porous Ni₂P nanosheets firmly rooted into Ni foam substrate which can guarantee excellent electrical contacts, strong substrate adherence and large amount of active sites. Such a binder-free flexible HER cathode exhibits superior electrocatalytic performance with an overpotential of 134 mV at current density of 10 mA cm⁻². It also shows superior stability at higher current densities of 100 and 500 mA cm⁻² for at least 48 h and negligible performance degradation is observed.     

Synthesis of Ni2P/Ni5P4 on porous N decorated rGO foam for efficiently electrocatalytic hydrogen evolution reaction

As a new generation of non-precious metal catalysts, nickel phosphide is regarded as an ideal substitute for precious metal platinum in electrochemical hydrogen evolution. Here, a hydrogen evolution reaction (HER) electrocatalyst is developed by in situ growth of Ni₂P/Ni₅P₄ heterostructures on porous N decorated rGO foam (named Ni₂P/Ni₅P₄/N-rGO). The porous rGO foam structure provides a larger surface area and abundant active sites. The Ni₂P/Ni₅P₄ nanoparticles with heterostructures are uniformly distributed on the rGO sheet, which enhance the charge transfer ability. The decorating of N element also correspondingly improves the HER performance. The as-prepared Ni₂P/Ni₅P₄/N-rGO exhibits excellent HER performance in alkaline medium. When the current density is 10 mA cm^?2, the overpotential is only 22 mV. No obvious loss of HER activity after 2000 cyclic voltammetry indicates that the composite has excellent stability. This work presents a valuable route for fabricating inexpensive and high-performance catalysts for electrocatalysis.     

Platinum nanoparticles decorated Nb2CTx MXene as an efficient dual functional catalyst for hydrogen evolution and oxygen reduction reaction

Here, a dual functional Nb₂CT_x@Pt nanocomposite has been synthesized by in situ reduction method. The Pt loading in the composite has been optimized to get minimum overpotential (141 mV at 10 mA/cm²) for hydrogen evolution reaction (HER) along with a promising Tafel slope of 46.3 mV/dec, while Pt/C shows an overpotential and Tafel slope of 104 mV and 32.4 mV/dec, respectively. The Pt mass activity for Nb₂CT_x@Pt3.8 composite at 100 mV overpotential was 3.44 A g^?1 while the Pt mass activity for conventional Pt/C was 0.7 A g^?1, which shows that the activity of Nb₂CT_x@Pt3.8 composite is approximately 5 times higher than Pt/C. In addition, the catalyst was found to be stable for continuous 500 cycles without any binder molecules. The oxygen reduction reaction (ORR) capability of the material was also evaluated and found that the catalyst exhibited a current density of ?4.28 mA/cm² in the diffusion limiting region in comparison with the current density of ?5.82 mA/cm² for Pt/C at 2600 revolutions per minute (RPM). The Pt mass activity of Nb₂CT_x@Pt3.8 composite for ORR is approximately 10 times higher than Pt/C. The Nb₂CT_x@Pt3.8 composite was able to reduce O₂ completely using the 4-electron pathway with very little peroxide production. From these results, the dual functionality of the Nb₂CT_x@Pt3.8 composite for both HER and ORR has been established.     

In-situ grown of Ni2P nanoparticles on 2D black phosphorus as a novel hybrid catalyst for hydrogen evolution

Nickel phosphide-based nanomaterials have been acted as efficient catalysts for the hydrogen evolution reaction (HER), however, the design of novel and high performance HER catalyst is still a challenge. Herein, we report a novel 2D material black phosphorus (BP) as support for constructing Ni₂P-based hybrid catalyst by a one-pot thermal decomposition approach. TEM results indicated that the monodispersed Ni₂P nanoparticles with small size and good dispersion supported on the surface of layered BP, which implied that more catalytic active sites may be exposed for HER. The as-synthesized Ni₂P/BP hybrid exhibits high HER electrocatalytic performance with low onset overpotential (70 mV), small Tafel slope (81 mV dec^?1), large double-layer capacitance (1.24 mF cm^?2), high conductivity and good stability, which can be assigned to the strong synergistic effect between Ni₂P and BP. Therefore, BP may be a suitable support for constructing excellent catalysts in electrocatalysis.     

MoS2||CoP heterostructure loaded on N,P-doped carbon as an efficient trifunctional catalyst for oxygen reduction,oxygen evolution,and hydrogen evolution reaction

Exploring multifunctional electrocatalysts is crucial for the development of energy conversion and storage equipments, such as fuel cells, water splitting devices and zinc-air batteries. Herein, we provide a rational design whereby the cobalt phosphide particles are introduced into molybdenum sulfide nanosheets to form a heterostructure (MoS₂||CoP) through the ultrasonic method and calcination. Subsequently, N, P-doped carbon (NPC) is obtained synchronously. The as-prepared MoS₂||CoP/NPC demonstrates highly effective multifunctional catalytic performance for oxygen evolution and hydrogen evolution reaction at lower overpotential, as well as oxygen reduction reaction at high half-wave potential. What this reveals is higher power density and superior stability in zinc-air battery. The excellent electrocatalytic activity of MoS₂||CoP/NPC may be attributed to the presence of the MoS₂||CoP heterostructure, as well as N, P-doped carbon coupled with a high percentage of pyridinic-N. This work proposes a novel and facile strategy to prepare the heterostructure compound and serves as a good reference for constructing efficient and low-cost electrocatalysts.     

Ultrathin-layered MoS2 hollow nanospheres decorating Ni3S2 nanowires as high effective self-supporting electrode for hydrogen evolution reaction

High-activity and cost-effective transition metal sulfides (TMSs) have attracted tremendous attention as promising catalysts for hydrogen evolution reaction (HER). However, a significant challenge is the simultaneous construction of abundant electrochemical active sites and the fast electronic transmission path to boost a high-efficient HER. Herein, we demonstrate a facile one-step hydrothermal preparation of MoS₂ hollow nanospheres decorating Ni₃S₂ nanowires supported on Ni foam (NF), without any other additional template, surfactant or annealing. In this three-dimensional (3D) heterostructure, the ultrathin-layered MoS₂ hollow nanospheres contribute to the promotion of the total surface area and the electrochemical active sites. Meanwhile, the Ni₃S₂ nanowires are beneficial to the high electrical conductivity. Consequently, the optimized MoS₂/Ni₃S₂/NF-200-24 electrocatalyst presents an extremely superior HER activity to that of individual MoS₂/NF and Ni₃S₂/NF. The HER overpotentials are 85 mV at 10 mA cm⁻² and 189 mV at 100 mA cm⁻², which are also comparable with the state-of-the-art 20% Pt/C/NF electrode at both low and high current.     

Highly efficient Ni0.5Fe0.5Se2/MWCNT electrocatatalyst for hydrogen evolution reaction in acid media

In the present energy scenario of the world, hydrogen with high energy content seems to be a better green alternative to depleting fossil fuels. Here we describe an innovative and efficient iron nickel diselenide (Ni_0.5Fe_0.5Se₂) as a potential electrocatalyst for hydrogen evolution reaction in acid media. Ni_0.5Fe_0.5Se₂ has been fabricated by means of one-step hydrothermal process supported by multi walled carbon nanotubes (MWCNTs). Ni_0.5Fe_0.5Se₂/MWCNTs electrocatalyst has been prepared from cost-effective and highly available earth-abundant elements. The crystalline structure, morphology and elemental composition of Ni_0.5Fe_0.5Se₂/MWCNTs with different weight percentage (1, 3, 5, 7%) of MWCNTs in the composite. The electrocatalysts has been successfully evaluated by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), energy dispersive X-ray analysis (EDAX), field emission scanning electron microscopy (FE-SEM). Cyclic voltammetry (CV), Tafel and electrochemical impedance analysis have been utilized to investigate. Among the investigated weight percentages, the electrocatalyst with 3 wt% of MWCNT exhibited high hydrogen evolution activity with a current density of 10 mA/cm² at an overpotential 200 mV with a Tafel slope of 71 mVdec⁻¹. The synergistic efforts between Ni_0.5Fe_0.5Se₂ and MWCNTs in the promotion of hydrogen evolution activity is ascribed to active sites, low electron transfer resistance and superior electrochemical kinetics of molecular hydrogen (H₂) production.     

Self-supported Ni2P nanotubes coated with FeP nanoparticles electrocatalyst (FeP@Ni2P/NF) for oxygen evolution reaction

Bimetallic phosphides have been widely investigated as electrocatalysts for oxygen evolution reaction (OER) due to their efficient activity and environmental friendliness. While the reasonable design and controllable synthesis of bimetallic phosphide with typical nanostructure is still a great challenge. Hence, we put forward a novel and straightforward way for constructing FeP nanoparticles coated Ni₂P ultrathin nanotube arrays on the surface of Ni foil (FeP@Ni₂P/NF), which is synthesized through two steps of electrodeposition and subsequent in-situ phosphorization process. The obtained FeP@Ni₂P/NF shows excellent electrochemical activity for OER, and it only needs potential of 1.52 V vs. RHE to reach the current density of 50 mA cm⁻² in an alkaline media. The excellent electrocatalytic activity of FeP@Ni₂P/NF mainly benefits from: (i) the synergistic effect between FeP and Ni₂P promoting electron transfer; (ii) the formation of the unique 3D ultrathin nanotube arrays increasing the quantity of active sites and avoiding the agglomeration of catalysts during testing. In addition, the influence of reaction condition on the electrochemical activity for OER has also been investigated through altering the phosphorization temperature of precursor.     

Palladium nanoparticles grown on β-Mo2C nanotubes as dual functional electrocatalysts for both oxygen reduction reaction and hydrogen evolution reaction

Developing efficient dual functional electrocatalysts for both oxygen reduction reaction (ORR) and hydrogen evolution reaction (HER) is critical for boosting the performance of fuel cells and metal air batteries, as well as production of clean and sustainable energy source. Herein, Pd nanoparticles grown on Mo₂C nanotubes were prepared as dual functional electrocatalysts for both ORR and HER. A series of samples with different Pd loadings were fabricated, while the morphology and the structural features were well examined by transmission electron microscopy (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). Interestingly, both the ORR activity and HER activity first increased then decreased with the increasing of Pd loading, and the sample of Mo₂C-Pd-9% exhibited the best performance among the series, superior than commercial Pd/C in both ORR and HER tests. Furthermore it also exhibited markedly higher long-term stability than Pd/C for both electrocatalytic reactions. The results may shed light on rational design of novel bi-functional electrocatalysts in the renewable energy field.     

Ultrafine and highly-dispersed bimetal Ni2P/Co2P encapsulated by hollow N-doped carbon nanospheres for efficient hydrogen evolution

Ultrafine Ni₂P/Co₂P nanoparticles encapsulated in hollow porous N-doped carbon nanospheres are synthesized through a facile two-step access. Firstly, metallic Ni and Co coated by hollow N-doped spheres as precursors are obtained through a high temperature calcination route of organic polymer and inorganic Ni and Co salts. Then bimetal Ni₂P/Co₂P supported on N-doped carbon nanospheres are acquired by a facile phosphorization process. It is worth to note that aniline-pyrrole polymer can prevent fast growth and severe aggregation of Ni₂P/Co₂P, which implies more exposed active sites. Moreover, the calcination of hollow polymer spheres lead to the formation of ultrathin NC shell on the surface of Ni₂P/Co₂P hybrids, which can tune electronic structures, improve the conductivity and protect active sites from corrosion in harsh conditions. When used as HER catalyst, it displays remarkable catalytic activity in both acidic and alkaline solutions, which needs an onset potential of only 164 mV and 168 mV, respectively. Therefore, this work may propose a new strategy to design unique inorganic-organic heterostructures to combine ultrafine metal phosphides with porous carbon for efficient HER.     

Strandberg-type polyoxometalate deriving O,P co-doped NiMoS/CC catalyst for highly efficient hydrogen evolution electrocatalysis

Hydrogen production from electrolytic water is an indispensable component in the field of renewable energy. The preparation of electrocatalysts with low price and high performance is essential for hydrogen evolution reaction (HER). Herein, Strandberg-type polyoxometalate was used as pre-assembled molecular platforms to construct and regulate NiMoS active sites at the atomic level. O,P doping was performed to boost the number of active sites using controllable sulfidation method. O,P–NiMoS nanoparticles supported on highly conductive carbon cloth exhibit significant activity for HER. The overpotential are only 39 and 30 mV at a current density of 10 mA cm^?2 in both acidic and alkaline solutions, respectively. This excellent performance can be attributed to the finely tailored NiMoS active sites, increase of S-unsaturated species and the synergistic effect between carbon cloth and O,P–NiMoS. Therefore, this study provides a feasible strategy for rational design of efficient electrocatalysts for renewable energy applications.     

Synthesis and electrocatalytic activity of Ni0.85Se/MoS2 for hydrogen evolution reaction

Recently, the replacement of expensive platinum-based catalytic materials with non-precious metal materials to electrolyze water for hydrogen separation has attracted much attention. In this work, Ni_0.85Se, MoS₂ and their composite Ni_0.85Se/MoS₂ with different mole ratios are prepared successfully, as electrocatalysts to catalyze the hydrogen evolution reaction (HER) in water splitting. The result shows that MoS₂/Ni_0.85Se with a molar ratio of Mo/Ni = 30 (denoted as M30) has the best catalytic performance towards HER, with the lowest overpotential of 118 mV at 10 mA cm⁻², smallest Tafel slope of 49 mV·dec⁻¹ among all the synthesized materials. Long-term electrochemical testing shows that M30 has good stability for HER over at least 30 h. These results maybe due to the large electrochemical active surface area and high conductivity. This work shows that transition metal selenides and sulfides can form effective electrocatalyst for HER.     

Novel peapod-like Ni2P@N-doped carbon nanorods array on carbon fiber for efficient electrocatalytic urea oxidation and hydrogen evolution reaction

Designing and optimizing structure is an effective method to enhance electrocatalytic performance of transition metal-based catalysts. In this work, an innovative nanostructured electrode, consisted of peapod-like Ni₂P@N-doped carbon nanorods array coating on carbon fiber (CF@p-Ni₂P@NC), is devised and synthesized. The N-doped carbon layer is crucial for maintaining the peapod-like nanostructure, which allows for multi-channel electrolyte transport and gas product release. And the carbon layer coating Ni₂P nanoparticles also enhance electrical conductivity and stability, thus ensuring fast electron transport from/to active sites and the long-term stability of catalyst during urea oxidation reaction (UOR)/hydrogen evolution reaction (HER). Benefit from the reasonable structure, CF@p-Ni₂P@NC present perfect performance with getting 100 mA cm^?2 at potential/overpotential of 1.417/0.194 V for UOR/HER in 1.0 M KOH containing 0.5 M urea. In addition, the overall urea-electrolysis system using CF@p-Ni₂P@NC bifunctional electrode only requires 1.590 V to obtain 100 mA cm^?2.     

Self-standing,hybrid three-dimensional-porous MoS2/Ni3S2 foam electrocatalyst for hydrogen evolution reaction in alkaline medium

Self-standing and hybrid MoS₂/Ni₃S₂ foam is fabricated as electrocatalyst for hydrogen evolution reaction (HER) in alkaline medium. The Ni₃S₂ foam with a unique surface morphology results from the sulfurization of Ni foam showing a truncated-hexagonal stacked sheets morphology. A simple dip coating of MoS₂ on the sulfurized Ni foam results in the formation of self-standing and hybrid electrocatalyst. The electrocatalytic HER performance was evaluated using the standard three-electrode setup in the de-aerated 1 M KOH solution. The electrocatalyst shows an overpotential of 190 mV at ?10 mA/cm² with a Tafel slope of 65.6 mV/dec. An increased surface roughness originated from the unique morphology enhances the HER performance of the electrocatalyst. A density functional approach shows that, the hybrid MoS₂/Ni₃S₂ heterostructure synergistically favors the hydrogen adsorption-desorption steps. The hybrid electrocatalyst shows an excellent stability under the HER condition for 12 h without any performance degradation.     

Electrochemically active and robust cobalt doped copper phosphosulfide electro-catalysts for hydrogen evolution reaction in electrolytic and photoelectrochemical water splitting

The area of non-noble metals based electro-catalysts with electrochemical activity and stability similar or superior to that of noble metal electro-catalyst for efficient hydrogen production from electrolytic and photoelectrochemical (PEC) water splitting is a subject of intense research. In the current study, exploiting theoretical first principles study involving determination of hydrogen binding energy to the surface of the electro-catalyst, we have identified the (Cu_0.83Co_0.17)₃P: x at. % S system displaying excellent electrochemical activity for hydrogen evolution reaction (HER). Accordingly, we have experimentally synthesized (Cu_0.83Co_0.17)₃P: x at. % S (x = 10, 20, 30) demonstrating excellent electrochemical activity with an onset overpotential for HER similar to Pt/C in acidic, neutral as well as basic media. The highest electrochemical activity is exhibited by (Cu_0.83Co_0.17)₃P:30 at. % S nanoparticles (NPs) displaying overpotential to reach 100 mA cm^?2 in acidic, neutral and basic media similar to Pt/C. The (Cu_0.83Co_0.17)₃P:30 at. % S NPs also display excellent electrochemical stability in acidic media for long term electrolytic and PEC water splitting process [using our previously reported (Sn_0.95Nb_0.05) O₂: N-600 nanotubes (NTs) as the photoanode]. The applied bias photon-to-current efficiency obtained using (Cu_0.83Co_0.17)₃P:30 at. % S NPs as the cathode electro-catalyst for HER in an H-type PEC water splitting cell (～4%) is similar to that obtained using Pt/C (～4.1%) attesting to the promise of this exciting non-noble metal containing system.     

Electrocatalytic performances of oxygen-deficient titanium dioxide nanosheet coupled palladium nanoparticles for oxygen reduction and hydrogen evolution reactions

The development of multifunctional electrocatalysts is crucial for enhancing the efficiency of electrochemical conversion in energy devices. Here we have synthesized TiO_2-x nanosheets (NSs) supported metallic Pd nanoparticles (Pd/TiO_2-x NSs) as an electrocatalyst using a simple impregnation process. High electrochemical surface areas (ECSAs) and strong metal support interactions (SMSI) of the electrocatalyst showed improved ORR performance throughout a wide pH range under ambient conditions. The outstanding durability of the catalyst was proven by the square-wave potential cycling experiment at 60 °C. Additionally, it was shown that Pd/TiO_2-x NSs showed improved HER activity and stability in 0.5 M H₂SO₄. The catalyst had an overpotential of 19.5 mV for the 10 mA cm⁻² and a low Tafel slope of 41 mV dec⁻¹. The catalyst also showed higher stability for about 30 h in HER performance. This work will help in rationally building nanostructured electrocatalysts loaded on carbon-free support for efficient electrochemical energy storage devices.     

Oxygen reduction reaction and hydrogen evolution reaction catalyzed by carbon-supported molybdenum-coated palladium nanocubes

Oxygen reduction reaction (ORR) and hydrogen evolution reaction (HER) are two important processes for electrochemical energy storage and conversion. Herein, we describe the preparation of carbon-supported Pd nanocubes@Mo core@shell nanostructures as efficient dual catalysts for both ORR and HER. The core@shell structure was manifested by high-resolution transmission electron microscopy measurements, including high angle-angular dark field-scanning transmission electron microscopy and elemental mapping analysis. Further structural insights were obtained in X-ray diffraction and X-ray photoelectron spectroscopy measurements. The nanostructures exhibited apparent electrocatalytic activity toward both ORR and HER, and the performances were markedly higher than those without the deposition of a Mo overlayer. In ORR, the activity was even better than that of commercial Pt/C within the context of onset potential, specific and mass activities; whereas in HER, the performance of Pd nanocubes@Mo core@shell nanostructures remained subpar as compared to that of Pt/C in terms of the overpotential to reach the current density of 10 mA cm^?2, the Tafel slope was comparable and the stability was excellent. The excellent electrocatalytic performance can be attributed to the Pd-Mo synergistic effects imparted from the core-shell structure.