N,S co-doped NiCo2O4@CoMoO4/NF hierarchical heterostructure as an efficient bifunctional electrocatalyst for overall water splitting

Electrocatalytic overall water splitting technology has received considerable attention in recent years. The fabrication of low-cost, earth-rich and potent bifunctional electrocatalysts is vital for hydrogen evolution (HER) and oxygen evolution reactions (OER). Herein, the N and S co-doped NiCo₂O₄@CoMoO₄ heterostructures (N, S–NCO@CMO₄₀₀) are fabricated by CVD and hydrothermal methods. N and S atoms as auxiliary active centers can increase the activity of Ni, Co and Mo atoms at the same time. Hierarchical heterostructures generate more interfaces to accelerate mass transfer and enlarge the electrochemical surface area, which greatly enhances the catalytic activity. The catalyst displays outstanding OER performance. The overpotentials of OER and HER are 165 and 100 mV at a current density of 10 mA cm^?2, respectively. More importantly, the N, S–NCO@CMO₄₀₀-based water splitting cell has a low voltage of 1.46 V at 10 mA cm^?2. Furthermore, the N, S–NCO@CMO₄₀₀ runs for 120 h in stable operation. This work provides new ideas for the design of hierarchical heterostructures with two-element incorporation.     

Electronic and structural engineering of NiCo2O4/Ti electrocatalysts for efficient oxygen evolution reaction

The oxygen evolution reaction (OER) involves four electron transfer processes and is of great significance in water electrolysis. The development of efficient and robust non-precious OER electrocatalysts remains a critical challenge for the production, storage and conversion of renewable energy. Herein, vertically NiCo₂O₄ nanosheets are grown on Ti mesh via a facile solvothermal method which is followed by low-temperature calcination. The NiCo₂O₄/Ti catalyst exhibits outstanding OER performance with a low overpotential of 353 mV to drive the current density of 10 mA cm^?2 and a Tafel slope of 61 mV dec^?1 in alkaline solution. Moreover, the stable electrocatalyst undergoes negligible degradation in alkaline media at least 20 h. The acceleration of the electrochemical OER likely stems from the facile electron transfer promoted by the NiCo₂O₄/Ti interface as revealed by X-ray photoelectron spectroscopy. This work introduces a novel strategy for the establishment low-cost electrocatalysts for electrochemical water splitting.     

Autologous growth of Fe-doped Ni(OH)2 nanosheets with low overpotential for oxygen evolution reaction

Highly active and durable electrocatalysts for oxygen evolution reaction (OER) play a vital role in water splitting. Despite numerous efforts, the strategies to prepare durable and effective electrocatalysts via scalable methods still remain a great challenge. In this work, we fabricated Fe-doped Ni(OH)₂ ultrathin nanosheets (Fe–Ni–OH/Ni) via autologous growing of Ni(OH)₂ from Ni foam, and in situ electrochemical-assisted doping Fe into Ni(OH)₂. Benefiting from the unique structure with large surface areas and strong coupling effects between Fe and Ni, the optimal Fe–Ni–OH electrodes exhibit remarkable catalytic performance toward OER, which requires an overpotential of 220 mV to achieve a current density of 10 mA cm⁻² with a Tafel slope of 48.3 mV dec⁻¹. The Fe–Ni–OH electrodes also possess high stability even under a high current density of 500 mA cm⁻² for 600 h with an ultralow overpotential of 290 mV. Using Ni–Fe–OH electrodes as both anode and cathode for overall water splitting, only a small overpotential of 1.57 V is required to reach a current density of 10 mA cm⁻². Moreover, the high catalytic performance and scalable preparation method can meet the emergency needs for the practical application.     

Electrodeposition of NiS/Ni2P nanoparticles embedded in amorphous Ni(OH)2 nanosheets as an efficient and durable dual-functional electrocatalyst for overall water splitting

To develop earth-abundant and cost-effective catalysts for overall water splitting is still a major challenge. Herein, a unique “raisins-on-bread” Ni–S–P electrocatalyst with NiS and Ni₂P nanoparticles embedded in amorphous Ni(OH)₂ nanosheets is fabricated on Ni foam by a facile and controllable electrodeposition approach. It only requires an overpotential of 120 mV for HER and 219 mV for OER to reach the current density of 10 mA cm⁻² in 1 M KOH solution. Employed as the anode and cathode, it demonstrates extraordinary electrocatalytic overall water splitting activity (cell voltage of only 1.58 V @ 10 mA cm⁻²) and ultra-stability (160 h @ 10 mA cm⁻² or 120 h @50 mA cm⁻²) in alkaline media. The synergetic electronic interactions, enhanced mass and charge transfers at the heterointerfaces facilitate HER and OER processes. Combined with a silicon PV cell, this Ni–S–P bifunctional catalyst also exhibits highly efficient solar-driven water splitting with a solar-to-hydrogen conversion efficiency of 12.5%.     

Porous sunflower plate-like NiFe2O4/CoNi–S heterostructure as efficient electrocatalyst for overall water splitting

Constructing high-efficient and nonprecious electrocatalysts is of primary importance for improving the efficiency of water splitting. Herein, a novel sunflower plate-like NiFe₂O₄/CoNi–S nanosheet heterostructure was fabricated via facile hydrothermal and electrodeposition methods. The as-fabricated NiFe₂O₄/CoNi–S heterostructure array exhibits remarkable bifunctional catalytic activity and stability toward oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in alkaline media. It presents a small overpotential of 219 mV and 149 mV for OER and HER, respectively, to produce a current density of 10 mA cm^?2. More significantly, when the obtained electrodes are used as both the cathode and anode in an electrolyzer, a voltage of 1.57 V is gained at 10 mA cm^?2, with superior stability for 72 h. Such outstanding properties are ascribed to: the 3D porous network structure, which exposes more active sites and accelerates mass transfer and gas bubble emission; the high conductivity of CoNi–S, which provides faster charge transport and thus promotes the electrocatalytic reaction of the composites; and the effective interface engineering between NiFe₂O₄ (excellent performance for OER) and CoNi–S (high activity for HER), which leads to a shorter transport pathway and thus expedites electron transfer. This work provides a new strategy for designing efficient and inexpensive electrocatalysts for water splitting.     

NiCoP coated on NiCo2S4 nanoarrays as electrode materials for hydrogen evolution reaction

It is very important to exploit robust electrocatalysts for the urea splitting in an alkaline medium. Hence, the NiCo₂S₄@NiCoP nanoarrays on Ni foam (NiCo₂S₄@NiCoP/NF) was successfully synthesized for the first time and used as an efficient and stable difunctional electrocatalyst for the overall urea splitting. As one of the most promising bifunctional electrocatalysts reported, NiCo₂S₄@NiCoP only needs 108 mV to reach current density of 10 mA cm⁻² for hydrogen evolution reaction. Moreover, such NiCo₂S₄@NiCoP//NiCo₂S₄@NiCoP electrodes couple display superior urea splitting performance with the requirement of a cell voltage of 1.53 V to drive a catalytic current density of 10 mA cm⁻². In addition, the NiCo₂S₄@NiCoP material presents high long-term electrocatalytic stability keeping its performance at 11 mA cm⁻² for 12 h. The experimental results demonstrate that the sluggish Volmer step has been improved by incorporating the NiCoP to the NiCo₂S₄.     

High throughput preparation of Ni–Mo alloy thin films as efficient bifunctional electrocatalysts for water splitting

The synthesis of cost-effective and high-performance electrocatalysts for water splitting is the main challenge in electrochemical hydrogen production. In this study, we adopted a high throughput method to prepare bi-metallic catalysts for oxygen/hydrogen evolution reactions (OER/HER). A series of Ni–Mo alloy electrocatalysts with tunable compositions were prepared by a simple co-sputtering method. Due to the synergistic effect between Ni and Mo, the intrinsic electrocatalytic activity of the Ni–Mo alloy electrocatalysts is improved, resulting in excellent HER and OER performances. The Ni₉₀Mo₁₀ electrocatalyst shows the best HER performance, with an extremely low overpotential of 58 mV at 10 mA cm^?2, while the Ni₄₀Mo₆₀ electrocatalyst shows an overpotential of 258 mV at 10 mA cm^?2 in OER. More significantly, the assembled Ni₄₀Mo₆₀//Ni₉₀Mo₁₀ electrolyzer only needs a cell voltage of 1.57 V to reach 10 mA cm^?2 for overall water splitting.     

MoS2/NiFeS2 heterostructure as a highly efficient electrocatalyst for overall water splitting at high current densities

Searching for efficient, stable and low-cost nonprecious catalysts for oxygen and hydrogen evolution reactions (OER and HER) is highly desired in overall water splitting (OWS). Herein, presented is a nickel foam (NF)-supported MoS₂/NiFeS₂ heterostructure, as an efficient electrocatalyst for OER, HER and OWS. The MoS₂/NiFeS₂/NF catalyst achieves a 500 mA cm⁻² current density at a small overpotential of 303 mV for OER, and 228 mV for HER. Assembled as an electrolyzer for OWS, such a MoS₂/NiFeS₂/NF heterostructure catalyst shows a quite low cell voltage (≈1.79 V) at 500 mA cm⁻², which is among the best values of current non-noble metal electrocatalysts. Even at the extremely large current density of 1000 mA cm⁻², the MoS₂/NiFeS₂/NF catalyst presents low overpotentials of 314 and 253 mV for OER and HER, respectively. Furthermore, MoS₂/NiFeS₂/NF shows a ceaseless durability over 25 h with almost no change in the cell voltage. The superior catalytic activity and stability at large current densities (>500 mA cm⁻²) far exceed the benchmark RuO₂ and Pt/C catalysts. This work sheds a new light on the development of highly active and stable nonprecious electrocatalysts for industrial water electrolysis.     

High-performance bifunctional Fe-doped molybdenum oxide-based electrocatalysts with in situ grown epitaxial heterojunctions for overall water splitting

The design and development of low-cost, abundant reserves, high catalytic activity and durability bifunctional electrocatalysts for water splitting are of great significance. Here, simple hydrothermal and hydrogen reduction methods were used to fabricate a uniform distribution of Fe-doped MoO₂/MoO₃ sheets with abundant oxygen vacancies and heterojunctions on etched nickel foam (ENF). The Fe– MoO₂/MoO₃/ENF exhibited a small overpotential of 36 mV at 10 mA cm⁻² for hydrogen evolution reaction (HER), an excellent oxygen evolution reaction (OER) overpotential of 310 mV at 100 mA cm⁻² and outstanding stabilities of 95 h and 120 h for the HER and OER, respectively. As both cathode and anode catalysts, the heterogeneously structured Fe– MoO₂/MoO₃/ENF required a low cell voltage of 1.57 V at 10 mA cm⁻². Density functional theory (DFT) calculations show that Fe doping and MoO₂/MoO₃ heterojunctions can significantly reduce the band gap of the electrode, accelerate electron transport and reduce the potential barrier for water splitting. This work provides a new approach for designing metal ion doping and heterostructure formation that may be adapted to transition metal oxides for water splitting.     

Structure-design and synthesis of nickel-cobalt oxide/sulfide/phosphide composite nanowire arrays for efficient overall water splitting

The construction of cost-effective bifunctional electrocatalysts with the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is significant for efficient overall water splitting. Herein, this work demonstrates a novel strategy for the synthesis of nickel-cobalt oxides/sulfides/phosphides composite (denoted as NiCoO–2P/S) nanoarrays on Ni foam. In this method, Ni–Co bimetallic oxide nanowires on Ni foam were partially phosphorized and sulfurized simultaneously in situ to yield Ni–Co oxide/sulfide/phosphide composite. The NiCoO–2P/S arrays have good interfacial effects and display many holes in the nanowires, giving it the advantage of large accessible surfaces on the nanowires and a beneficial for the release of gas bubbles, resulting in an excellent OER performance with a low overpotential (η) of 254 mV at 100 mA cm^?2 and good HER activity (η₁₀ = 143 mV at 10 mA cm^?2). The electrocatalytic test results demonstrate small Tafel slopes (82 mV dec^?1 for HER, 88 mV dec^?1 for OER) and the satisfying durability in an alkaline electrolyte, indicating that the HER and OER activity was enhanced by the introduction of the Ni/Co sulfides and phosphides into Ni–Co oxides composite nanowires. Furthermore, the as-prepared NiCoO–2P/S catalyst can be used as both the anode and the cathode simultaneously to realize overall water splitting in the two-electrode electrolyzer. This system can be driven at low cell voltages of 1.50 and 1.68 V to achieve current densities of 10 and 100 mA cm^?2, respectively. This work provides an alternative strategy to prepare high-performance bifunctional electrochemical materials and demonstrates the advantages of Ni–Co oxide/sulfide/phosphide composites for water splitting.     

Mo-doped cobalt hydroxide nanosheets coupled with cobalt phosphide nanoarrays as bifunctional catalyst for efficient and high-stability overall water splitting

Exploring earth-abundant bifunctional electrocatalysts with highly efficient activity for overall water splitting is exceedingly challenging. Herein, a facile electrodeposit-phosphating-electrodeposit strategy is developed to obtain Mo-doped Co(OH)₂ nanofilms coupled with CoP nanosheets loaded on nickel foam (denoted as MoCo(OH)₂/CoP/NF). Benefitting from the unique structural merits, MoCo(OH)₂/CoP/NF exhibits outstanding electrocatalytic performance both for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). The results indicate that the dopant of Mo in the Co(OH)₂ can further improve the electrocatalytic performance. To achieve a current density of 10 mA cm^?2, only 15 and 287 mV are required for HER and OER in 1 M KOH solution, respectively. When MoCo(OH)₂/CoP/NF simultaneously employed as cathode and anode for overall water splitting, it only requires 1.593 and 1.853 V to achieve 10 and 50 mA cm^?2, respectively. The electrocatalytic activity of MoCo(OH)₂/CoP/NF for overall water splitting even exceed the benchmark electrode couple of Pt/C/NF||RuO₂/NF, and MoCo(OH)₂/CoP/NF perform excellent durability for overall water splitting. This work opens up new avenues for large-scale commercial production of overall water splitting catalysts due to its low-cost and facile method.     

Electrodeposition of Ni–Fe micro/nano urchin-like structure as an efficient electrocatalyst for overall water splitting

The usage of active electrocatalysts is a useful approach to accelerate the kinetics of electrochemical reactions and to enhance the efficiency of water splitting. To fabricate active electrocatalysts, the creation of new structures that can be easily constructed has always been a research interest. Ni–Fe based alloys are generally known as active OER catalyst. However, in this study, a novel Ni–Fe micro/nano urchin-like structure is reported to be active for both HER and OER. This is the first report of the fabrication of this morphology by a fast, one-step, and affordable electrodeposition method as an efficient HER/OER electrocatalyst. The optimized Ni–Fe coating on Cu substrate demonstrated promising HER activity with low overpotentials of ?124 and ?243 mV at the current densities of ?10 and ?100 mA cm^?2, respectively. Moreover, the fabricated Ni–Fe urchin-like catalyst is highly active toward OER, requiring overpotentials of only 292 and 374 mV to deliver 10 and 100 mA cm^?2. The unique structure of the synthesized coating with an abundant number of micro/nano-scale cones is suggested to play a vital role in the superior HER/OER activity of the catalyst. This article introduces a cost-effective method for the fabrication of a novel urchin-like Ni–Fe alloy as a highly active bifunctional water splitting electrocatalyst.     

Nickel foam-supported Fe,Ni-Polyporphyrin microparticles: Efficient bifunctional catalysts for overall water splitting in alkaline media

Developing highly active, stable and sustainable electrocatalysts for overall water splitting is of great importance to generate renewable H₂ for fuel cells. Herein, we report the synthesis of electrocatalytically active, nickel foam-supported, spherical core-shell Fe-poly(tetraphenylporphyrin)/Ni-poly(tetraphenylporphyrin) microparticles (FeTPP@NiTPP/NF). We also show that FeTPP@NiTPP/NF exhibits efficient bifunctional electrocatalytic properties toward both the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER). Electrochemical tests in KOH solution (1 M) reveal that FeTPP@NiTPP/NF electrocatalyzes the OER with 100 mA cm⁻² at an overpotential of 302 mV and the HER with 10 mA cm⁻² at an overpotential of 170 mV. Notably also, its catalytic performance for OER is better than that of RuO₂, the benchmark OER catalyst. Although its catalytic activity for HER is slightly lower than that of Pt/C (the benchmark HER electrocatalyst), it shows greater stability than the latter during the reaction. The material also exhibits electrocatalytic activity for overall water splitting reaction at a current density of 10 mA cm⁻² with a cell voltage of 1.58 V, along with a good recovery property. Additionally, the work demonstrates a new synthetic strategy to an efficient, noble metal-free-coordinated covalent organic framework (COF)-based, bifunctional electrocatalyst for water splitting.     

Flower-like HEA/MoS2/MoP heterostructure based on interface engineering for efficient overall water splitting

The development of cheap, efficient, and active non-noble metal electrocatalysts for total hydrolysis of water (oxygen evolution reaction (OER) and hydrogen evolution reaction (HER)) is of great significance to promote the application of water splitting. Herein, a heterogeneous structured electrode based on FeAlCrMoV high-entropy alloy (HEA) was synthesized as a cost-effective electrocatalyst for hydrogen and oxygen evolution reactions in alkaline media. In combination of the interfacial synergistic effect and the high-entropy coordination environment, flower-like HEA/MoS₂/MoP exhibited the excellent HER and OER electrocatalytic performance. It showed a low overpotential of 230 mV at the current density of 10 mA cm⁻² for OER and 148 mV for HER in alkaline electrolyte, respectively. Furthermore, HEA/MoS₂/MoP as both anode and cathode also exhibited an overpotential of 1.60 V for overall water splitting. This work provides a new strategy for heterogeneous structure construction and overall water splitting based on high-entropy alloys.     

Core-shell nanoarray structured La doped Cu(OH)2@NiCo layered double hydroxide for oxygen evolution reaction

Efficient hydrogen production via water splitting is significant because of the zero-carbon emission property. Developing low-cost and highly efficient electrocatalysts for the oxygen evolution reaction (OER), a key half-reaction of water splitting, is critical. Herein, we designed Cu(OH)₂@NiCo layered double hydroxide core-shell nanoarray supported on copper foam (CF) with different La doping amount (abbreviated as Cu(OH)₂@NiCoLa LDH/CF) via the facile electrodeposition method. Owing to the synergistic effect between La and NiCo LDH by electronic structure tuning, Cu(OH)₂@NiCoLa LDH/CF shows excellent OER performance with the lowest overpotential of 254 mV to drive the current density of 10 mA cm^?2 and outstanding long-term durability for 24 h. The idea of doping rare-earth metal into non-noble NiCo-based LDHs core-shell nanoarray structure in this work can inspire the design of other efficient electrocatalysts.     

Interface regulation of Pt quantum dots doped nickel phosphide and cobalt hydroxide to promote electrocatalytic overall water splitting

The transition metal phosphates are earth-abundant minerals that have been shown to perform well in electrocatalytic water splitting, whereas these catalysts still tend to have excessively high overpotentials and slow kinetics in HER and OER processes. In the present work, hybrid catalysts consisting of Pt quantum dots doped NiP (NiP-Pt) nano-embroidery spheres and Co(OH)₂ nanosheets were successfully prepared by two-step electrodeposition method. The excellent catalytic performance of the catalyst relies principally on the synergistic interaction between NiP and Pt quantum dots. Additionally, the NiP-Pt exhibits strong electronic interactions at the interface with Co(OH)₂. Consequently, the catalyst has a strong catalytic performance in terms of HER and OER catalytic performance. In terms of HER, an overpotential of only 40 mV is required when the current density reaches 10 mA cm^?2, corresponding to a Tafel slope of 49.85 mV·dec^?1. At the same time, the catalyst also performs well at OER, with a current density of 10 mA cm^?2 at an overpotential of 186 mV and a Tafel slope of 53.049 mV·dec^?1 much less than most electrocatalysts. This study involving electrodeposition and doping of quantum dots provides a new idea for the efficient synthesis of fundamental HER and OER bifunctional catalysts.     

Interface engineering of the NiCo2O4@MoS2/TM heterostructure to realize the efficient alkaline oxygen evolution reaction

Electrochemical water splitting is considered as a promising strategy for the efficient hydrogen production, yet it is hindered by the sluggish oxygen evolution reaction (OER). Herein, heterostructure OER catalyst is fabricated by combining MoS₂ nanosheets with NiCo₂O₄ hollow sphere on Ti mesh. Benefiting from the heterogeneous nanointerface between NiCo₂O₄ and MoS₂, this electrocatalyst demonstrates excellent OER activity in basic environment with overpotentials of 313 and 380 mV achieving 10 and 100 mA cm⁻². The superb catalytic performance stems from hollow the nanostructure and interfacial engineering strategy that enhance intrinsic activity and provide faster charge transfer. Hence, this work provides a feasible path for exploiting the high-efficient catalysts.     

A novel in-situ strategy develops for Mo2C nanoparticles incorporated on N,P co-doped stereotaxically carbon as efficient electrocatalyst for overall water splitting

Developing cost-effective and remarkable electrocatalysts toward oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) performs excelling role in boosting the hydrogen energy application. Herein, a novel in-situ one-pot strategy is developed for the first time to synthesize molybdenum carbide nanoparticles (Mo₂C NPs) incorporated on nitrogen (N) and phosphorous (P) co-doped stereotaxically carbon (SC). The optimized Mo₂C NPs/N, P–SC–800 electrocatalyst exhibits lower overpotentials of 131 and 287 mV for HER and OER to deliver a current density of 10 mA cm^?2 in 1.0 M KOH medium with smaller Tafel slopes of 58.9 and 74.4 mV/dec, respectively. In addition, an electrolyzer using Mo₂C NPs/N, P–SC–800 electrode as cathode and anode delivers a current density of 10 mA cm^?2 at a small voltage of 1.64 V for overall water splitting. The excellent water splitting performance could be ascribed to optimum Mo₂C NPs for more accessible active sites, highly active N, P-SC networks for accelerated electron transfers, and synergetic effect between Mo₂C NPs and N, P-SC networks. The N, P-SC network not only enhances the overall dispersion of Mo₂C NPs but also contributes numerous electroactive edges to enhance the performance of HER, OER, and overall water splitting activity. This research work explores the in-situ one-step strategies of advanced, cost-effective, and non-precious metal electrocatalysts for efficient water splitting and motivates the consideration of a novel class of heteroatom doped stereotaxically carbon nanocomposites for sustainable energy production.     

Superhydrophilic 3D peony flower-like Mo-doped Ni2S3@NiFe LDH heterostructure electrocatalyst for accelerating water splitting

Constructing highly efficient nonprecious electrocatalysts for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is essential to improve the efficiency of overall water splitting, but still remains lots of obstacles. Herein, a novel 3D peony flower-like electrocatalyst was synthesized by employing Mo–Ni₂S₃/NF nanorod arrays as scaffolds to in situ growth ultrathin NiFe LDH nanosheets (Mo-Ni₂S₃@NiFe LDH). As expected, the novel peony flower-like Mo–Ni₂S₃@NiFe LDH displays superior electrocatalytic activity and stability for both OER and HER in alkaline media. Low overpotentials of only 228 mV and 109 mV are required to achieve the current densities of 50 mA cm^?2 and 10 mA cm^?2 for OER and HER, respectively. Additionally, the material remarkably accelerates water splitting with a low voltage of 1.54 V at 10 mA cm^?2, which outperforms most transition metal electrodes. The outstanding electrocatalytic activity benefits from the following these features: 3D peony flower-like structure with rough surface provides more accessible active sites; superhydrophilic surfaces lead to the tight affinity between electrode with electrolyte; metallic Ni substrate and highly conductive Mo–Ni₂S₃ nanorods scaffold together with offer fast electron transfer; the nanorod arrays and porous Ni foam accelerate gas bubble release and ions transmission; the strong interfacial effect between Mo-doped Ni₃S₂ and NiFe LDH shortens transport pathway, which are benefit for electrocatalytic performance enhancement. This work paves a new avenue for construction and fabrication the 3D porous structure to boost the intrinsic catalytic activities for energy conversion and storage applications.     

Synthesis of bristlegrass-like Co-doped Ni2P composites on Ni foam for overall seawater splitting

Seawater is the most abundant resource on earth, so developing cost-effective, highly durable corrosion resistance and efficient electrocatalysts are crucial to enhance seawater splitting. Herein, we prepared 3D bristlegrass-like Co-doped Ni₂P (Co-Ni₂P) composites supported on Ni foam (NF) through a facile solvothermal method combined and a subsequent phosphatization treatment. Benefiting from the unique structure, Co-Ni₂P shows excellent electrocatalytic activity as an electrode material for both the hydrogen evolution reaction (HER, low overpotential of 116 mV at 50 mA cm^?2) and oxygen evolution reaction (OER, low overpotential of 266 mV at 50 mA cm^?2). Moreover, the as-prepared Co-Ni₂P composites exhibit excellent stability and corrosion resistance in an alkaline medium. Density functional theory (DFT) calculations were employed to evaluate the H1 adsorption of Co-Ni₂P, and the results proved the high catalytic activity for the HER. This study provides new materials with a unique morphology for overall water splitting.