Block poly(arylene ether nitrile ketone)s with comb-shaped alkyl chains as anion exchange membranes

A new approach is presented here for constructing higher-performance anion exchange membranes (AEMs) by combining block-type and comb-shaped architectures. A series of quaternization fluorene-containing block poly (arylene ether nitrile ketone)s (QFPENK-m-n) were synthesized by varying the length of hydrophobic segment as AEMs. The well-designed architecture, which involved grafting comb-shaped C10 long alkyl side chains onto the block-type main chains, formed efficient ion-transport channels, as confirmed by atomic force microscopy. As a result, the AEMs showed high hydroxide conductivities in the range of 34.3–102.1 mS⋅cm⁻¹ from 30 to 80 °C at moderate ion exchange capacities (IECs). Moreover, the hydrophobic segment with nitrile groups also exhibited a profound anti-swelling property for the AEMs, resulting in ultralow swelling ratios ranging from 4.7% to 7.1% at 30 °C and 7.5%–9.8% at 80 °C, as well as superb conductivity-to-swelling ratios at 80 °C. In addition, the AEMs displayed good mechanical properties, thermal and oxidative stability, and optimizable alkaline stability.     

Enhanced ionic conductivity of anion exchange membranes by grafting flexible ionic strings on multiblock copolymers

A new strategy to prepare high-conductivity anion exchange membranes (AEMs) is presented here. A series of phenolphthalein-based poly(arylene ether sulfone nitrile) multiblock AEMs has been synthesized by selectively grafting flexible ionic strings on hydrophilic segments to form ionic regions. Moreover, the phenolphthalein groups are introduced to force chains apart and create additional interchain spacing. In addition, the nitrile groups suspended on main chains are aimed at enhancing the anti-swelling behavior of as-prepared AEMs. Along these processes, well-defined phase separation has been attained, forming excellent ion-transport channels. The effective phase separation has been confirmed by atomic force microscopy. Finally, as-prepared AEMs exhibit a high hydroxide conductivity, ranging from 40.1 to 121.6 mS cm⁻¹ in the temperature range of 30–80 °C, and superior ionic conductivity to IEC ratio at 80 °C. Furthermore, excellent thermal stability and desirable mechanical strength have been rendered by as-prepared AEMs. However, the alkaline stability of as-prepared AEMs requires further optimization.     

Fluorene-containing poly(arylene ether sulfone nitrile)s multiblock copolymers as anion exchange membranes

A series of novel fluorene-containing poly(arylene ether sulfone nitrile)s (FPESN-m/n) multiblock copolymers bearing 1,2-dimethylimidazole groups (ImFPESN-m/n) were synthesized for preparing anion exchange membranes (AEMs). Bromination rather than chloromethylation was used in this work. The bulky and rigid fluorene groups were introduced to force each chain apart to create large interchain spacing. Strong polar nitrile groups were introduced into the hydrophobic segments with the intention of enhancing the anti-swelling property of the AEMs. The length of fluorene–containing hydrophobic segment was varied to study the structure–property of the AEMs. With the ion groups anchored selectively and densely on the hydrophilic segments, all the AEMs exhibited well-defined hydrophilic/hydrophobic microphase-separated structures. As a result, the AEMs showed high hydroxide conductivities in the range of 35.2–118.3 mS cm⁻¹ from 30 to 80 °C and superb ratios of ionic conductivity to swelling at 80 °C. Furthermore, the AEMs also exhibited good mechanical properties, thermal and alkaline stabilities.     

PEMs with high proton conductivity and excellent methanol resistance based on sulfonated poly (aryl ether ketone sulfone) containing comb-shaped structures for DMFCs applications

Sulfonated poly (aryl ether ketone sulfone) polymers (SPAEKS-PSA X) with the comb-shaped structure were prepared by grafting with 1, 3-propanesultone (PSA). The successful synthesis of SPAEKS-PSA X was confirmed by the FT-IR spectra. The morphology of the membrane was investigated by the small angle X-ray scattering and the transmission electron microscopy. The nanophase separation was brought in a comb-shaped structure between the main chains and the propyl sulfonic acid groups. The SPAEKS-PSA 15 membrane exhibited the highest conductivity of 101 mS cm⁻¹ under 80 °C and 100% relative humidity conditions (100% RH). In addition, the methanol permeability coefficients of SPAEKS-PSA X membranes (7.56 × 10⁻⁷ to 9.44 × 10⁻⁷ cm² s⁻¹) were much lower compared to Nafion®117 (22.37 × 10⁻⁷ cm² s⁻¹). Meanwhile, the SPAEKS-PSA X membranes also displayed excellent mechanical properties (tensile modulus >30 MPa), thermal, oxidative stabilities and fuel cell performance. Considering the parameters above, especially the elevated proton conductivities as well as high methanol resistance, the comb-shaped structure is a promising design for DMFCs applications.     

High alkaline stability and long-term durability of imidazole functionalized poly(ether ether ketone) by incorporating graphene oxide/metal-organic framework complex

The poly(ether ether ketone) (PEEK) was prepared as organic matrix. ZIF-8 and GO/ZIF-8 were used as fillers. A series of novel new anion exchange membranes (AEMs) were fabricated with imidazole functionalized PEEK and GO/ZIF-8. The structure of ZIF-8, GO/ZIF-8 and polymers are verified by ¹H NMR, FT-IR and SEM. This series of hybrid membranes showed good thermal stability, mechanical properties and alkaline stability. The ionic conductivities of hybrid membranes are in the range of 39.38 mS cm^?1–43.64 mS cm^?1 at 30 °C, 100% RH and 59.21 mS cm^?1–86.87 mS cm^?1 at 80 °C, 100% RH, respectively. Im-PEEK/GO/ZIF-8-1% which means the mass percent of GO/ZIF-8 compound in Im-PEEK polymers is 1%, showed the higher ionic conductivity of 86.87 mS cm^?1 at 80 °C and tensile strength (38.21 MPa) than that of pure membrane (59.21 mS cm^?1 at 80 °C and 19.47 MPa). After alkaline treatment (in 2 M NaOH solution at 60 °C for 400 h), the ionic conductivity of Im-PEEK/GO/ZIF-8-1% could also maintain 92.01% of the original ionic conductivity. The results show that hybrid membranes possess the ability to coordinate trade-off effect between ionic conductivity and alkaline stability of anion exchange membranes. The excellent performances make this series of hybrid membranes become good candidate for application as AEMs in fuel cells.     

Synthesis and characterization of a long side-chain double-cation crosslinked anion-exchange membrane based on poly(styrene-b-(ethylene-co-butylene)-b-styrene)

By choosing a triple block polymer, poly(styrene-b-(ethylene-co-butylene)-b-styrene) (SEBS), as the backbone and adopting a long side-chain double-cation crosslinking strategy, a series of SEBS-based anion-exchange membranes (AEMs) was successively synthesized by chloromethylation, quaternization, crosslinking, solution casting, and alkalization. The 70C16-SEBS-TMHDA membrane showed high OH⁻ conductivity (72.13 mS/cm at 80 °C) and excellent alkali stability (only 10.86% degradation in OH⁻ conductivity after soaking in 4-M NaOH for 1700 h at 80 °C). Furthermore, the SR was only 9.3% at 80 °C and the peak power density of the H₂/O₂ single cell was up to 189 mW/cm² at a current density of 350 mA/cm² at 80 °C. By introducing long flexible side chains into a polymer SEBS backbone, the structure of the hydrophilic–hydrophobic microphase separation in the membrane was constructed to improve the ionic conductivity. Additionally, network crosslinked structure improved dimensional stability and mechanical properties.     

Facile synthesis of poly (arylene ether ketone)s containing flexible sulfoalkyl groups with enhanced oxidative stability for DMFCs

After tethering sodium 2-mercaptoethanesulfonate (MTS) to the bromomethylated poly(arylene ether ketone) precursor, a novel clustered sulfonated poly(arylene ether ketone) containing flexible sulfoalkyl groups (MTSPAEK) was prepared and used as polymer electrolyte membrane for application in DMFCs. The chemical structure and the degree of grafting of MTSPAEK copolymers were identified by ¹H NMR spectra. The resulted MTSPAEK copolymers exhibited excellent thermal stability (T_d5% > 259 °C) and good mechanical properties (tensile strength at break > 52 MPa). Compared to conventional sulfonated aromatic hydrocarbon polymers, MTSPAEK membranes displayed enhanced oxidative stability in Fenton's reagent owing to the elimination of free radicals by the sulfide groups located on the polymer side chains. Especially, MTSPAEK-2.10 with the highest content of flexible sulfoalkyl groups exhibited a highest proton conductivity of 0.181 S cm⁻¹ at 80 °C. It could be attributed to the obvious hydrophilic/hydrophobic phase-separated structure within the membrane, which was confirmed by AFM images. Moreover, MTSPAEK-2.10 membrane performed a peak power density of 70 mW cm⁻² in DMFC when feeding with 2 M methanol at 80 °C, which was comparable to the performance of recast Nafion as reported. Therefore, the combination of good thermal stability and mechanical properties, good oxidative stability, and good methanol barrier performance of MTSPAEK membranes indicated that they have potential to be alternative materials for PEMs in DMFCs.     

Highly durable and conductive poly(arylene piperidine) with a long heterocyclic ammonium side-chain for hydroxide exchange membranes

Recently, the preparation of hydroxide exchange membranes (HEMs) without ether bonds have attracted much attention because of their high chemical stability. Hence, ether-bond free, highly durable, and conductive poly(arylene piperidine)s (PAPips) tethered with heterocyclic ammonium via hexyl spacer chains were prepared successfully for HEMs via a facile synthetic procedure. The effect of the cationic groups (quaternary ammonium, piperidinium, and morpholinium) on the properties of the corresponding PAPip-based HEMs, including the morphology, hydroxide conductivity, and alkaline and chemical stability were systematically investigated. The as-designed PAPip-based membranes exhibited excellent overall performance. The membranes attached with piperidinium (IEC = 1.64 mmol g⁻¹) exhibited a hydroxide conductivity of 0.082 S cm⁻¹ at 80 °C and exhibited significant alkaline stability which maintained 80.1% of its conductivity after immersion in 1 M NaOH at 80 °C for 1500 h. The as-prepared membrane also presented a peak power density of 76 mW cm⁻² at 80 °C in a H₂/O₂ HEMFC. The resulting HEMs also showed excellent mechanical properties, thermal stability, and well-defined phase separation.     

Partially crosslinked comb-shaped PPO-based anion exchange membrane grafted with long alkyl chains: Synthesis,characterization and microbial fuel cell performance

Anion exchange membranes (AEMs) with higher ion exchange capacities (IECw) are limited to applications due to excessive swelling and higher water uptake. Crosslinked macromolecular structures have been a strategy to balance between ionic conductivity and swelling in membranes. However, highly crosslinked AEMs are usually mechanically brittle and poorer in ion transport. Thus we report a series of partially diamine crosslinked (X = 10%, 15%, 20%) comb-shaped AEMs functionalized with dimethylhexadecylammonium groups exhibiting improved flexibility, water uptake and swelling properties over conventional un-crosslinked or fully crosslinked materials. The higher conductivities in these PPO AEM(X) (for example, X = 20%, IECw = 1.96 mmol/g, σ(OH⁻) ~ 67 mS/cm at 80 °C) are attributed to the distinct nanophase separation as observed in SAXS and AFM analyses. Finally, the microbial fuel cell performances of the membranes were compared with commercially available cation and anion exchange membranes.     

Electrochemical properties of amorphous comb-shaped composite PEO polymer electrolyte

The electrochemical behaviour of a polyethylene oxide (PEO)-based composite polymer electrolyte are studied. The crystallinity of the PEO is suppressed by using a comb-shaped polymer to improve polymer chain mobility. An amorphous comb-shaped polymer, ‘TEC-24’, with a side-chain content of 24 mol%, is designed and fine silica powder is dispersed within it to enhance the mechanical properties above the melting point. The composite polymer electrolyte has an ionic conductivity of 1.6×10⁻⁴ and 1.6×10⁻³ S cm⁻¹ at 30 and 90 °C, respectively, with an electrochemical stability window close to 5.0 V, even at 80 °C (versus Li/Li⁺). The polymer electrolyte is evaluated using CuS as a cathode material and shows better cycle performance than that obtained with a liquid electrolyte.     

Synthesizing spindle-shaped anion exchange membranes to improve conductivity and stability

High ionic conductivity and excellent alkaline stability are very important for solid electrolyte. Therefore, spindle-shaped anion exchange membranes (AEMs) based on poly (arylene ether ketone) and 1-Bromo-N,N,N-trimethylhexane-6-aminium bromide (Br-QA) have been prepared. The obtained Br-QA can be grafted with poly (arylene ether ketone) main chains to form micro-phase separation structure enhancing the ionic conductivity. Especially, the grafting quaternary ammonium (QA) cation groups are separated by alkyl bromine endows the AEMs with alkaline stability features. Simultaneously, the OH⁻ conductivity of the QA-PAEK-0.6 obtained membranes is 0.046 S/cm under fully hydrated conditions at 60 °C. After immersing into 1 M NaOH alkaline solution for 15 days at 60 °C, the anionic conductivity still high to 0.03 S/cm. Meanwhile, the poly (arylene ether ketone) backbones provide excellent mechanical properties and the Br-QA cation groups also possess good thermal stability, which satisfy the requirement of wide applications.     

Pendent piperidinium-functionalized blend anion exchange membrane for fuel cell application

Alkaline anion exchange membrane fuel cell has fast cathode reactions and thus allows the use of low cost electrocatalysts. However, its practical application is hindered by the low hydroxide ion conductivity and alkaline stability of AEM. In this study, pendent piperidinium functionalized polyetheretherketone is synthesized and blended with polybenzimidazole for fabrication of composite anion exchange membrane. The pendent piperidinium functionalized side chains can create well-connected ionic transporting channels and thus impart the blend membranes high hydroxide conductivity (61.5–72.8 mS cm⁻¹ at 80 °C) and good tensile strength (42.8–58.9 MPa). Due to the strong interactions between polybenzimidazole and piperidinium groups of the polymers as confirmed by Fourier transform infrared spectroscopy, the piperidinium functionalized blend anion exchange membrane can retain 95% of its original OH⁻ conductivity value when treated in 1 M KOH at 60 °C for 576 h. The single fuel cell assembled with the membrane can yield a peak power density of 87 mW cm⁻² at 80 °C. Our work provides a new and effective method to balance the hydroxide conductivity and alkaline stability of anion exchange membranes.     

Macromolecule sulfonated Poly(ether ether ketone) crosslinked poly(4,4′-diphenylether-5,5′-bibenzimidazole) proton exchange membranes: Broaden the temperature application range and enhanced mechanical properties

Proton exchange membranes with a wide application temperature range were fabricated to start high-temperature fuel cells under room temperature. The volume swelling stability, oxidative stability as well as mechanical properties of crosslinked membranes have been improved for covalently crosslinking poly(4,4′-diphenylether-5,5′-bibenzimidazole) (OPBI) with fluorine-terminated sulfonated poly(ether ether ketone) (F-SPEEK) via N-substitution reactions. High proton conductivity was simultaneously realized at both high (80–160 °C) and low (40–80 °C) temperatures by crosslinking and jointly constructing hydrophilic-hydrophobic channels. The crosslinked membranes exhibited the highest proton conductivity of 191 mS cm⁻¹ at 80 °C under 98% relative humidity (RH) and 38 mS cm⁻¹ at 160 °C under anhydrous, respectively. Compared with OPBI membrane, the fuel cell performance of the crosslinked membranes showed higher peak power density at full temperature range (40–160 °C).     

Dense 1,2,4,5-tetramethylimidazolium-functionlized anion exchange membranes based on poly(aryl ether sulfone)s with high alkaline stability for water electrolysis

Anion exchange membranes with enough alkaline stability and ionic conductivity are essential for water electrolysis. In this work, a class of anion exchange membranes (PAES-TMI-x) with dense 1,2,4,5-tetramethylimidazolium side chains based on poly(aryl ether sulfone)s are prepared by aromatic nucleophilic polycondensation, radical substitution and Menshutkin reaction. Their chemical structure and hydrophilic/hydrophobic phase morphology are characterized by hydrogen nuclear magnetic resonance (¹H NMR) and atomic force microscope (AFM), respectively. The water uptake, swelling ratio and ionic conductivity for PAES-TMI-x are in the range of 23.8%–48.3%, 8.3%–14.3% and 18.22–96.31 mS/cm, respectively. These AEMs exhibit high alkaline stability, and the ionic conductivity for PAES-TMI-0.25 remains 86.8% after soaking in 2 M NaOH solution at 80 °C for 480 h. The current density of 1205 mA/cm² is obtained for the water electrolyzer equipped with PAES-TMI-0.25 in 2 M NaOH solution at 2.0 V and 80 °C, and the electrolyzer also has good operation stability at current density of 500 mA/cm². This work is expected to provide a valuable reference for the selection and design of cations in high-performance AEMs for water electrolysis.     

Fluorene-containing poly(arylene ether sulfone)s with imidazolium on flexible side chains for anion exchange membranes

Anion exchange membranes with high ionic conductivity and dimensional stability attract a lot of research interests. In present study, a series of fluorene-containing poly(arylene ether sulfone)s containing imidazolium on the flexible long side-chain are synthesized via copolycondensation, Friedel-Crafts reaction, ketone reduction, and Menshutkin reaction sequentially. The membranes used for characterization and membrane electrode assembly are obtained by solution casting and ion exchange thereafter. The morphology of the membranes is studied via transmission electron microscopy, and the microphase separation is observed. The long side-chain structure is responsible for the distinct hydrophilic-hydrophobic microphase separation, which facilitates the transport of hydroxide ions in the membranes. The incorporation of imidazolium on the flexible long side-chain is favorable for the ionic aggregation and transport in the membranes. The resulted membranes exhibit high hydroxide conductivities in the range of 48.5–83.1 mS cm⁻¹ at 80 °C. All these membranes show good dimensional stability and thermal stability. The single cell performance shows a power density of 102.3 mW cm⁻² at 60 °C using membrane electrode assembly based-on one of the synthesized polymers.     

High‐performance solid PEO/PPC/LLTO‐nanowires polymer composite electrolyte for solid‐state lithium battery

Solid polymer composite electrolyte (SPCE) with good safety, easy processability, and high ionic conductivity was a promising solution to achieve the development of advanced solid‐state lithium battery. Herein, through electrospinning and subsequent calcination, the Li_0.33La_0.557TiO₃ nanowires (LLTO‐NWs) with high ionic conductivity were synthesized. They were utilized to prepare polymer composite electrolytes which were composed of poly (ethylene oxide) (PEO), poly (propylene carbonate) (PPC), lithium bis (fluorosulfonyl)imide (LiTFSI), and LLTO‐NWs. Their structures, thermal properties, ionic conductivities, ion transference number, electrochemical stability window, as well as their compatibility with lithium metal, were studied. The results displayed that the maximum ionic conductivities of SPCE containing 8 wt.% LLTO‐NWs were 5.66 × 10^?5 S cm^?1 and 4.72 × 10^?4 S cm^?1 at room temperature and 60°C, respectively. The solid‐state LiFePO₄/Li cells assembled with this novel SPCE exhibited an initial reversible discharge capacity of 135 mAh g^?1 and good cycling stability at a charge/discharge current density of 0.5 C at 60°C.     

The effect of side chain length on the morphology and transport properties of fluorene-based anion exchange membranes

Poly[(fluorene alkylene)- co(biphenyl alkylene)] (PFBA) compounds with quaternary ammonium (QA) groups (PFBA-nC-QAs) that are linked with side chains of various lengths (n = 1～6 carbon atoms) are designed and synthesized by a superacid catalysis reaction, which has the advantages of low cost, easy synthesis and mild reaction conditions. The correlative properties of PFBA-nC-QAs, including water uptake, thermal stability, morphology, ion conductivity and alkaline stability, are discussed in detail. The side chain length is vital to the morphology and transport performance of PFBA-nC-QAs. As the side chain length increases, the alkaline stability and hydroxide ion conductivity of the prepared membranes improve with decreasing water uptake. Experimental results indicate that the hydroxide conductivity of PFBA-6C-QA is 154 mS cm^?1 at 80 °C. Moreover, no degradation of functional groups of PFBA-6C-QA is observed during 30 days of immersion in 2 M NaOH at 80 °C. The peak power density of PFBA-6C-QA is 278 mW cm^?2 at 60 °C with a hydrogen/air single fuel cell. By controlling the length of the polymer side chain, the method is simple and effective for building anion exchange membranes with high performance.     

Facile preparation of poly (2,6-dimethyl-1,4-phenylene oxide)-based anion exchange membranes with improved alkaline stability

Traditional quaternary ammonium (QA)-type anion exchange membranes (AEMs) usually exhibit insufficient alkaline stability, which impede their practical application in fuel cells. To address this issue, a facile method for the simple and accessible preparation of QA-type AEMs with improved alkaline stability was developed in this study. A series of novel AEMs (QPPO-xx-OH) were prepared from commercially available poly (2,6-dimethyl-1,4-phenylene oxide) (PPO) and 3-(dimethylamino)-2,2-dimethyl-1-propanol, via a three-step procedure that included bromination, quaternization, and ion exchange. Scanning electron microscopy revealed that dense, uniform membranes were formed. These QPPO-xx-OH membranes exhibited moderate hydroxide conductivities with ranges of 4–15 mS/cm at 30 °C and 12–36 mS/cm at 80 °C. When tested at similar ion exchange capacity (IEC) levels, the IEC retentions of QPPO-xx-OH membranes were 16–22% higher than that of traditional PPO membranes containing benzyltriethylammonium ions, after immersed in 2 M NaOH aqueous solution at 60 °C for 480 h, and the QPPO-47-OH membrane displayed excellent alkaline stability with the IEC retention of 92% after 480 h. In addition, the QPPO-xx-OH membranes also exhibited robust mechanical properties (tensile strength up to 37.6 MPa) and good thermal stability (onset decomposition temperature up to 150 °C). This study provides a new and scalable method for the facile preparation of AEMs with improved alkaline stability.     

Macromolecular crosslink of imidazole functionalized poly(vinyl alcohol) and brominated poly(phenylene oxide) for anion exchange membrane with enhanced alkaline stability and ionic conductivity

Anion exchange membranes (AEMs) are important energy conversion device for fuel cell applications, where the overall redox reaction happened. Both alkaline stability and ionic conductivity should be considered in the long-term use of fuel cells. In this work, imidazole functionalized polyvinyl alcohol was designed as the functional macromolecular crosslinking agent to fabricate crosslinked AEMs with brominated poly(phenylene oxide) matrix. Benefitting from the macromolecular crosslinked structure, the membranes displayed enhanced ionic conductivity and alkaline stability at elevated temperature. Moreover, membrane with ion exchange capacity of 1.54 mmol/g displayed ionic conductivity of 78.8 mS/cm at 80 °C, and the conductivity could maintain 75% of the initial value after immersion in 1 M NaOH solution at 80 °C for 1000 h. Moreover, a peak power density of 105 mW/cm² was achieved when the assembled single cell with c-91 was operated at 60 °C. These results indicated that the construction of macromolecular crosslinked AEMs have great potential in the practical application of anion exchange membranes fuel cells.     

Comb-shaped sulfonated poly(aryl ether sulfone) proton exchange membrane for fuel cell applications

Structure design is the primary strategy to acquire suitable ionomers for preparing proton exchange membranes (PEMs) with excellent performance. A series of comb-shaped sulfonated fluorinated poly(aryl ether sulfone) (SPFAES) membranes are prepared from sulfonated fluorinated poly(aryl ether sulfone) polymer (SPFAE) and sulfonated poly(aryl ether sulfone) oligomer (SPAES-Oligomer). Chemical structures of the comb-shaped membranes are verified by ¹H nuclear magnetic resonance (NMR) and Fourier transform infrared (FT-IR) spectra. The comb-shaped SPFAES membranes display more continuous hydrophilic domains for ion transfer, because the abundant cations and flexible side-chains structure possess higher mobility and hydrophilicity, which show significantly improved proton conductivity, physicochemical stability, mechanical property compared to the linear SPFAE membranes. In a H₂/O₂ single-cell test, the SPFAES-1.77 membrane achieves a higher power density of 699.3 mW/cm² in comparison with Nafion® 112 (618.0 mW/cm²) at 80 °C and 100% relative humidity. This work offers a promising example for the synthesis of highly branched polymers with flexible comb-shaped side chains for high-performance PEMs.