Nickel foam-supported Fe,Ni-Polyporphyrin microparticles: Efficient bifunctional catalysts for overall water splitting in alkaline media

Developing highly active, stable and sustainable electrocatalysts for overall water splitting is of great importance to generate renewable H₂ for fuel cells. Herein, we report the synthesis of electrocatalytically active, nickel foam-supported, spherical core-shell Fe-poly(tetraphenylporphyrin)/Ni-poly(tetraphenylporphyrin) microparticles (FeTPP@NiTPP/NF). We also show that FeTPP@NiTPP/NF exhibits efficient bifunctional electrocatalytic properties toward both the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER). Electrochemical tests in KOH solution (1 M) reveal that FeTPP@NiTPP/NF electrocatalyzes the OER with 100 mA cm⁻² at an overpotential of 302 mV and the HER with 10 mA cm⁻² at an overpotential of 170 mV. Notably also, its catalytic performance for OER is better than that of RuO₂, the benchmark OER catalyst. Although its catalytic activity for HER is slightly lower than that of Pt/C (the benchmark HER electrocatalyst), it shows greater stability than the latter during the reaction. The material also exhibits electrocatalytic activity for overall water splitting reaction at a current density of 10 mA cm⁻² with a cell voltage of 1.58 V, along with a good recovery property. Additionally, the work demonstrates a new synthetic strategy to an efficient, noble metal-free-coordinated covalent organic framework (COF)-based, bifunctional electrocatalyst for water splitting.     

Self-standing and efficient bifunctional electrocatalyst for overall water splitting under alkaline media enabled by Mo1-xCoxS2 nanosheets anchored on carbon fiber paper

The layered MoS₂ nanostructures have been widely used in the electrochemical hydrogen evolution reaction (HER), but rarely applied in overall water splitting application for their ignorable oxygen evolution reaction (OER) activity. To address this issue, a novel self-standing and bifunctional electrocatalyst, consisting of Co-doped MoS₂ nanosheets anchored on carbon fiber paper, has been prepared via hydrothermal method. Taking advantage of conductive substrate of carbon fiber paper, sufficient-exposed active edges of MoS₂ sheets, and metallic character caused by Co-doping, our electrode exhibits high-efficient bifunctional activities for the overall water splitting in alkaline electrolyte (1 M KOH), which can produce a current density of 20 mA cm⁻² at an overpotential of 197 mV for HER and 235 mV for OER.     

MoS2/NiFeS2 heterostructure as a highly efficient electrocatalyst for overall water splitting at high current densities

Searching for efficient, stable and low-cost nonprecious catalysts for oxygen and hydrogen evolution reactions (OER and HER) is highly desired in overall water splitting (OWS). Herein, presented is a nickel foam (NF)-supported MoS₂/NiFeS₂ heterostructure, as an efficient electrocatalyst for OER, HER and OWS. The MoS₂/NiFeS₂/NF catalyst achieves a 500 mA cm⁻² current density at a small overpotential of 303 mV for OER, and 228 mV for HER. Assembled as an electrolyzer for OWS, such a MoS₂/NiFeS₂/NF heterostructure catalyst shows a quite low cell voltage (≈1.79 V) at 500 mA cm⁻², which is among the best values of current non-noble metal electrocatalysts. Even at the extremely large current density of 1000 mA cm⁻², the MoS₂/NiFeS₂/NF catalyst presents low overpotentials of 314 and 253 mV for OER and HER, respectively. Furthermore, MoS₂/NiFeS₂/NF shows a ceaseless durability over 25 h with almost no change in the cell voltage. The superior catalytic activity and stability at large current densities (>500 mA cm⁻²) far exceed the benchmark RuO₂ and Pt/C catalysts. This work sheds a new light on the development of highly active and stable nonprecious electrocatalysts for industrial water electrolysis.     

Ni3S2-MoSx nanorods grown on Ni foam as high-efficient electrocatalysts for overall water splitting

In order to solve the problem of large overpotential in water electrolysis for hydrogen production, transition metal sulfides are promising bifunctional electrocatalysts for hydrogen evolution reaction/oxygen evolution reaction that can significantly reduce overpotential. In this work, Ni₃S₂ and amorphous MoS_x nanorods directly grown on Ni foam (Ni₃S₂-MoS_x/NF) were prepared via one-step solvothermal process, which were used as a high-efficient electrocatalyst for overall water splitting. The Ni₃S₂-MoS_x/NF composite exhibits very low overpotentials of 65 and 312 mV to reach 10 mA cm⁻² and 50 mA cm⁻² in 1.0 M KOH for HER and OER, respectively. Besides, it exhibits a low Tafel slope (81 mV dec⁻¹ for HER, 103 mV dec⁻¹ for OER), high exchange current density (1.51 mA cm⁻² for HER, 0.26 mA cm⁻² for OER), and remarkable long-term cycle stability. This work provides new perspective for further the development of highly effective non-noble-metal materials in the energy field.     

Sulfuration of hierarchical Mn-doped NiCo LDH heterostructures as efficient electrocatalyst for overall water splitting

Constructing efficient bifunctional electrocatalysts for both cathode and anode is of great importance for obtaining green hydrogen by water splitting. Herein, sulfuration of hierarchical Mn-doped NiCo LDH heterostructures (Mn–NiCoS₂/NF) is constructed as a bifunctional electrocatalyst for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) via a facile hydrothermal-annealing strategy. Mn–NiCoS₂/NF shows an overpotential of 310 mV at 50 mA cm⁻² for OER and 100 mV at 10 mA cm⁻² for HER in 1.0 M KOH. Moreover, only 1.496 V@10 mA cm⁻² is required for overall water splitting by using Mn–NiCoS₂/NF as catalyst dual electrodes in a two-electrode system. The excellent performance of Mn–NiCoS₂/NF should be attributed to the ameliorative energy barriers of adsorption/desorption for HO⁻/H₂O through the modification of electronic structure of NiCo basal plane by Mn-doping and the acceleration of water dissociation steps via rich delocalized electron inside sulfur vacancies. The construction of hierarchical Mn–NiCoS₂/NF heterostructures provides new prospects and visions into developing efficient-advanced electrocatalysts for overall water splitting.     

Lanthanum doped copper oxide nanoparticles enabled proficient bi-functional electrocatalyst for overall water splitting

The need for a clean and an environmentally non-degrading sustainable energy resource has grown worldwide due to the huge depletion of other fuel sources, as a result, production of hydrogen by electrochemical water splitting is considered as a potential answer to this pertaining need. However, development of low-cost electrocatalyst as a replacement for Pt and RuO₂ for both Hydrogen Evolution Reaction (HER) and Oxygen Evolution Reaction (OER) remains a significant challenge for the production of hydrogen at a larger scale. This study presents the synthesis of non-noble metal-based lanthanum doped copper oxide nanoparticles as a potential bi-functional electrocatalyst for overall water splitting in alkaline electrolyte. The optimized 1% lanthanum (La) doped CuO electrocatalyst exhibits outstanding OER and HER activity in 1.0 M KOH electrolyte posting a potential of 1.552 V vs RHE for OER and −0.173 V vs RHE for HER at a current density of ~10 mAcm⁻². Significantly, the functional bi-catalyst exhibits a low cell voltage of 1.6 V to achieve overall water splitting at a current density of 10 mAcm⁻² along with long-term stability of 13.5 h for a cell voltage of 2.25 V at a constant current density of 30 mAcm⁻² with only 20% initial current lose after 13.5 h. The results demonstrate that the incorporation of the rare-earth element onto CuO nanoparticles has made it a viable high-end non-noble electrocatalyst for overall water splitting.     

Flower-like HEA/MoS2/MoP heterostructure based on interface engineering for efficient overall water splitting

The development of cheap, efficient, and active non-noble metal electrocatalysts for total hydrolysis of water (oxygen evolution reaction (OER) and hydrogen evolution reaction (HER)) is of great significance to promote the application of water splitting. Herein, a heterogeneous structured electrode based on FeAlCrMoV high-entropy alloy (HEA) was synthesized as a cost-effective electrocatalyst for hydrogen and oxygen evolution reactions in alkaline media. In combination of the interfacial synergistic effect and the high-entropy coordination environment, flower-like HEA/MoS₂/MoP exhibited the excellent HER and OER electrocatalytic performance. It showed a low overpotential of 230 mV at the current density of 10 mA cm⁻² for OER and 148 mV for HER in alkaline electrolyte, respectively. Furthermore, HEA/MoS₂/MoP as both anode and cathode also exhibited an overpotential of 1.60 V for overall water splitting. This work provides a new strategy for heterogeneous structure construction and overall water splitting based on high-entropy alloys.     

Electrodeposition of NiS/Ni2P nanoparticles embedded in amorphous Ni(OH)2 nanosheets as an efficient and durable dual-functional electrocatalyst for overall water splitting

To develop earth-abundant and cost-effective catalysts for overall water splitting is still a major challenge. Herein, a unique “raisins-on-bread” Ni–S–P electrocatalyst with NiS and Ni₂P nanoparticles embedded in amorphous Ni(OH)₂ nanosheets is fabricated on Ni foam by a facile and controllable electrodeposition approach. It only requires an overpotential of 120 mV for HER and 219 mV for OER to reach the current density of 10 mA cm⁻² in 1 M KOH solution. Employed as the anode and cathode, it demonstrates extraordinary electrocatalytic overall water splitting activity (cell voltage of only 1.58 V @ 10 mA cm⁻²) and ultra-stability (160 h @ 10 mA cm⁻² or 120 h @50 mA cm⁻²) in alkaline media. The synergetic electronic interactions, enhanced mass and charge transfers at the heterointerfaces facilitate HER and OER processes. Combined with a silicon PV cell, this Ni–S–P bifunctional catalyst also exhibits highly efficient solar-driven water splitting with a solar-to-hydrogen conversion efficiency of 12.5%.     

Nanoengineered Zn-modified Nickel Sulfide (NiS) as a bifunctional electrocatalyst for overall water splitting

Developing an efficient and inexpensive electrocatalyst is of paramount importance for realizing the green hydrogen economy through electrocatalytic water splitting. Here, we demonstrated a facile large-scale, industrially viable binder-free synthesis of Zn-doped NiS electrocatalyst on bare nickel foam (NF) through a hydrothermal technique. The present catalyst, i.e., nickel sulfide (NiS) nanosheets on nickel foam with optimized doping of Zn atom (Zn–NiS-3), displays excellent catalytic efficacy for both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). It requires an overpotential of 320 mV for OER at a current density of 50 mA cm⁻² and an overpotential of 208 mV for HER at a current density of 10 mA cm⁻². The water electrolyser device having Zn–NiS-3 electrocatalyst as both cathode and anode show excellent performance, requiring a cell voltage of only 1.71 V to reach a current density of 10 mA cm⁻² in an alkaline media. The density functional theory (DFT) based calculations showed enhanced density of states near Fermi energy after Zn doping in NiS and attributed to the enhanced catalytic activities. Thus, the present study demonstrates that Zn–NiS-3@NF can be coined as a viable electrocatalyst for green hydrogen production.     

Porous NiFe alloys synthesized via freeze casting as bifunctional electrocatalysts for oxygen and hydrogen evolution reaction

Binder-free NiFe-based electrocatalyst with aligned pore channels has been prepared by freeze casting and served as a bifunctional catalytic electrode for oxygen and hydrogen evolution reaction (OER and HER). The synergistic effects between Ni and Fe result in the high electrocatalytic performance of porous NiFe electrodes. In 1.0 M KOH, porous Ni₇Fe₃ attains 100 mA cm⁻² at an overpotential of 388 mV with a Tafel slope of 35.8 mV dec⁻¹ for OER, and porous Ni₉Fe₁ exhibits a low overpotential of 347 mV at 100 mA cm⁻² with a Tafel slope of 121.0 mV dec⁻¹ for HER. The Ni₉Fe₁//Ni₉Fe₁ requires a low cell voltage of 1.69 V to deliver 10 mA cm⁻² current density for overall water splitting. The excellent durability at a high current density of porous NiFe electrodes has been confirmed during OER, HER and overall water splitting. The fine electrocatalytic performances of the porous NiFe-based electrodes owing to the three-dimensionally well-connected scaffolds, aligned pore channels, and bimetallic synergy, offering excellent charge/ion transfer efficiency and sizeable active surface area. Freeze casting can be applied to design and synthesize various three-dimensionally porous non-precious metal-based electrocatalysts with controllable multiphase for energy conversion and storage.     

Multi-active site CoNi-MOFs as non-noble bifunctional electrocatalysts for highly efficient overall water splitting

The high-efficiency non-precious metal catalysts for oxygen evolution (OER) and hydrogen evolution (HER) are of great significance to the development of renewable energy technologies. Herein, a multiple active sites CoNi-MOFs-DBD electrocatalyst modified by low temperature plasma (DBD) was successfully synthesized by converting metal hydroxyfluoride on nickel foam into a well-arranged MOFs array using vapor deposition. The as-prepared CoNi-MOFs-DBD electrode showed better HER and OER catalytic activity, super hydrophilicity, and excellent stability. In an alkaline medium, the overpotential of HER is 203 mV at 10 mA cm^?2 and that of OER is 168 mV at 40 mA cm^?2. When CoNi-MOFs-DBD was used as a bifunctional electrocatalyst for overall water splitting in a two-electrode system, a current density of 10 mA cm^?2 can be achieved at a low voltage of 1.42 V, which shows great potential in electrocatalytic water splitting.     

Flower-like MoS2 with stepped edge structure efficient for electrocatalysis of hydrogen and oxygen evolution

A flower-like MoS₂ with a stepped edge structure was successfully and controllably fabricated as a bifunctional electrocatalyst efficient for hydrogen and oxygen evolution reactions. The hierarchically porous polycrystalline MoS₂ was characterized by a combination analysis of XRD, Raman, XPS, N₂-BET, SEM and TEM. In the hydrogen evolution reaction (HER), this as-obtained MoS₂/Ni catalyst presents significantly enhanced performance versus most previously studied catalysts. In the oxygen evolution reaction (OER), the electrocatalyst MoS₂/Ni gives rise to a rather low overpotential of ∼0.335 V at 20.0 mA cm⁻² and much enhanced durability over 6 h.     

The 3D ultra-thin Cu1-xNixS/NF nanosheet as a highly efficient and stable electrocatalyst for overall water splitting

In recent years, the exploration of efficient and stable noble-metal-free electrocatalysts is becoming increasingly important, used mainly for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). In this work, a new ultrathin porous Cu_1-xNi_xS/NF nanosheets array was constructed on the 3D nickel skeleton by two-step method: hydrothermal method and vulcanization method. Through these two processes, Cu_1-xNi_xS/NF has a larger specific surface area than that of foamed nickel (NF) and Cu_1-xNi_xO/NF. The Cu_1-xNi_xS/NF materials show excellent catalytic activity by accelerating the electron transfer rate and increase the amount of H₂ and O₂ produced. The lower overpotential was obtained only 350 mV at 20 mA cm⁻² for OER, not only that, but also the same phenomenon is pointed out in HER, optimal Cu_1-xNi_xS/NF presents low overpotentials of 189 mV to reach a current density of 10 mA cm⁻² in 1.0 M KOH for HER. Both OER and HER shows a lower Tafel slope: 51.2 mV dec⁻¹ and 127.2 mV dec⁻¹, subsequently, the overall water splitting activity of Cu_1-xNi_xS/NF was investigated, and the low cell voltage was 1.64 V (current density 10 mA cm⁻²). It can be stable for 14 h during the overall water splitting reaction. These results fully demonstrate that Cu_1-xNi_xS/NF non-precious metal materials can be invoked become one of the effective catalysts for overall water splitting, providing a richer resource for energy storage.     

Co-based MOF-derived Co/CoN/Co2P ternary composite embedded in N- and P-doped carbon as bifunctional nanocatalysts for efficient overall water splitting

In this work, we developed ternary metallic cobalt-cobalt nitride-dicobalt phosphide composite embedded in nitrogen and phosphorus co-doped carbon (Co/CoN/Co₂P-NPC) as bifunctional catalysts for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). The as-prepared Co/CoN/Co₂P-NPC is achieved by simultaneous annealing and phosphating of a Co–N rich metal-organic frameworks (MOFs) precursor. Compare with the phosphorus-free Co/CoN embedded nitrogen-doped carbon electrocatalyst (Co/CoN-NC), the as-prepared Co/CoN/Co₂P-NPC display superior HER and OER low overpotential of 99 mV and 272 mV at current density of 10 mA cm⁻². When Co/CoN/Co₂P-NPC electrocatalyst is use as bifunctional catalysts in overall alkaline water splitting, it exhibit excellent behaviour with 10 mA cm⁻² current at overall cell potential of 1.60 V. The excellent performance of Co/CoN/Co₂P-NPC electrocatalyst is attributed to the phosphating process that could further enhance synergistic effect, create stronger electronic interactions, and form efficient dual heteroatom doping to optimize the interfacial adhesion within the electrocatalyst. This present work will create more opportunities for the development of new, promising and more active sites electrocatalysts for alkaline electrolysis.     

Synthesis and electrocatalytic activity of Ni0.85Se/MoS2 for hydrogen evolution reaction

Recently, the replacement of expensive platinum-based catalytic materials with non-precious metal materials to electrolyze water for hydrogen separation has attracted much attention. In this work, Ni_0.85Se, MoS₂ and their composite Ni_0.85Se/MoS₂ with different mole ratios are prepared successfully, as electrocatalysts to catalyze the hydrogen evolution reaction (HER) in water splitting. The result shows that MoS₂/Ni_0.85Se with a molar ratio of Mo/Ni = 30 (denoted as M30) has the best catalytic performance towards HER, with the lowest overpotential of 118 mV at 10 mA cm⁻², smallest Tafel slope of 49 mV·dec⁻¹ among all the synthesized materials. Long-term electrochemical testing shows that M30 has good stability for HER over at least 30 h. These results maybe due to the large electrochemical active surface area and high conductivity. This work shows that transition metal selenides and sulfides can form effective electrocatalyst for HER.     

Bimetallic NiCo–NiCoO2 nano-heterostructures embedded on copper foam as a self-supported bifunctional electrode for water oxidation and hydrogen production in alkaline media

Earth-abundant, non-precious metal-based bifunctional electrocatalysts with efficient water splitting activity are of valuable importance in the limitation of energy losses in an alkaline environment. Herein, we report NiCo–NiCoO₂ nano-heterostructures embedded on the oxidized surface of copper foam (NiCo–NiCoO₂@Cu₂O@CF) as an efficient bifunctional electrocatalyst for overall water splitting in 1 M KOH electrolyte solution. In this study, metallic Ni and Co interlinkage with NiCoO₂ nanoparticles (NPs) are suggested to form by thermal decomposition of nickel-cobalt hydroxide precursors embedding on copper foam under a nitrogen environment. Bimetallic thin layered nano-heterostructures of NiCo–NiCoO₂@Cu₂O@CF exhibits a synergic effect of doubly active metals Ni and Co to achieve remarkable small overpotentials of 133 and 327 mV to achieve a current density of 10 mA cm^?2 for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). The influential synergetic and structural effects have been extensively discussed to understand the overall water splitting for designing an efficient electrocatalyst. Hence, this phenomenon for surface modification of conductive substrate (CF) with a suitable combination of metal/metal oxide alloying as catalytic material helps us to design and synthesize low cost, highly efficient, non-precious metal-based electrocatalysts for overall water splitting.     

Zn doped ZIF67-derived porous carbon framework as efficient bifunctional electrocatalyst for water splitting

The electrochemical splitting of water is considered to be an efficient and potential technique for producing clean hydrogen and oxygen. Although, there are lots of significant developments in composite of superior hydrogen evolution reaction (HER) or oxygen evolution reaction (OER) catalyst applied in water splitting currently, designing non-precious and low-cost bifunctional electrocatalysts with high performance is still an attractive challenging issue. In this article, we report a novel bifunctional electrocatalyst with cobalt-based nanoparticles (NPs) embedded in Zn-doped hierarchical porous three-dimension N-doped carbonization structure via an annealing process of metal organic frameworks (MOFs) connected by N-doped carbon nanotube (denoted as Co–Zn/PNC). This composite structure possesses the characteristics of more active sites, numerous mesopores and high conductivity. The resulting electrocatalyst (Co–Zn/PNC) can be used as both anode and cathode to roust the overall water splitting, getting a current density of 10 mA cm⁻² at a cell voltage of 1.63 V in 1.0 M KOH electrolyte.     

CoP-anchored high N-doped carbon@graphene sheet as bifunctional electrocatalyst for efficient overall water splitting

Electrocatalytic water splitting, as an ideal technology in renewable energy applications, suffers from high electrical energy consumption due to the slow kinetics of HER and OER reactions. Therefore, it is urgent to design efficient bifunctional catalysts to improve the reaction kinetics. Herein, a self-supported electrode, anchoring CoP nanoparticles on N-doped carbon/graphene (NC-G) and chemically growing on Ni foam as a whole electrode (denoted as NC-G-CoP/NF) displays promising electrocatalytic performance in 1.0 M KOH electrolyte, with a low overpotentials of 68 mV at 10 mA cm^?2 for HER and 255 mV at 50 mA cm^?2 for OER. This bifunctional electrocatalyst only needs 1.435 V to generate 10 mA cm^?2 for overall water splitting. The outstanding electrocatalytic performance is ascribed to the following factors: i) inherent nature of transition metal phosphides, ii) abundant and high dispersion N active sites in NC-G, iii) strong interaction between the NC-G and CoP nanoparticles, and iv) rapid electron transfer between the catalytic centers and Nickle foam. This provides a new perspective to design efficient electrocatalysts for electrocatalytic water splitting.     

Self-supported hierarchical porous FeNiCo-based amorphous alloys as high-efficiency bifunctional electrocatalysts toward overall water splitting

Rationally designing an efficient and cost-effective bifunctional electrocatalyst for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is a primary matter in applying electrocatalytic water splitting. Herein, a self-supported FeNiCo-based amorphous catalyst with a hierarchical micro/nanoporous structure is fabricated by dealloying an amorphous/nanocrystalline precursor. The amorphous nanoporous framework enables the prepared electrocatalyst to afford fast reaction kinetics, abundant active sites, and enhanced electrochemical active surface areas (ECSAs). Such structural advantages and the synergistic effects of the ternary transition metals contribute to a dramatic catalytic activity of this electrocatalyst under alkaline conditions, which delivers the current density of 10 mA cm⁻² at a low overpotential of 134 mV for HER and 206 mV for OER, respectively. Furthermore, a full electrolysis apparatus constructed by the self-supported hierarchical micro/nanoporous FeNiCo-based amorphous electrocatalyst as both cathode and anode acquires a dramatically low voltage of 1.58 V operating at 10 mA cm⁻² along with stability for more than 24 h for overall water splitting.     

Multi-shelled CoS2–MoS2 hollow spheres as efficient bifunctional electrocatalysts for overall water splitting

The exploration of highly efficient non-precious electrocatalysts is essential for water splitting devices. Herein, we synthesized CoS₂–MoS₂ multi-shelled hollow spheres (MSHSs) as efficient electrocatalysts both for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) using a Schiff base coordination polymer (CP). Co-CP solid spheres were converted to Co₃O₄ MSHSs by sintering in air. CoS₂–MoS₂ MSHSs were obtained by a solvothermal reaction of Co₃O₄ MSHSs and MoS₄²⁻ anions. CoS₂–MoS₂ MSHSs have a high specific surface area of 73.5 m²g^-1. Due to the synergistic effect between the CoS₂ and MoS₂, the electrode of CoS₂–MoS₂ MSHSs shows low overpotential of 109 mV with Tafel slope of 52.0 mV dec⁻¹ for HER, as well as a low overpotential of 288 mV with Tafel slope of 62.1 mV dec⁻¹ for OER at a current density of 10 mA cm⁻² in alkaline solution. The corresponding two-electrode system needs a potential of 1.61 V (vs. RHE) to obtain anodic current density of 10 mA cm⁻² for OER and maintains excellent stability for 10 h.