Synergistic Interlayer and Defect Engineering in VS2 Nanosheets toward Efficient Electrocatalytic Hydrogen Evolution Reaction

A simple one‐pot solvothermal method is reported to synthesize VS₂ nanosheets featuring rich defects and an expanded (001) interlayer spacing as large as 1.00 nm, which is a ≈74% expansion as relative to that (0.575 nm) of the pristine counterpart. The interlayer‐expanded VS₂ nanosheets show extraordinary kinetic metrics for electrocatalytic hydrogen evolution reaction (HER), exhibiting a low overpotential of 43 mV at a geometric current density of 10 mA cm^?2, a small Tafel slope of 36 mV dec^?1, and long‐term stability of 60 h without any current fading. The performance is much better than that of the pristine VS₂ with a normal interlayer spacing, and even comparable to that of the commercial Pt/C electrocatalyst. The outstanding electrocatalytic activity is attributed to the expanded interlayer distance and the generated rich defects. Increased numbers of exposed active sites and modified electronic structures are achieved, resulting in an optimal free energy of hydrogen adsorption (?G_H) from density functional theory calculations. This work opens up a new door for developing transition‐metal dichalcogenide nanosheets as high active HER electrocatalysts by interlayer and defect engineering.     

2D Transition‐Metal‐Dichalcogenide‐Nanosheet‐Based Composites for Photocatalytic and Electrocatalytic Hydrogen Evolution Reactions

Hydrogen (H₂) is one of the most important clean and renewable energy sources for future energy sustainability. Nowadays, photocatalytic and electrocatalytic hydrogen evolution reactions (HERs) from water splitting are considered as two of the most efficient methods to convert sustainable energy to the clean energy carrier, H₂. Catalysts based on transition metal dichalcogenides (TMDs) are recognized as greatly promising substitutes for noble‐metal‐based catalysts for HER. The photocatalytic and electrocatalytic activities of TMD nanosheets for the HER can be further improved after hybridization with many kinds of nanomaterials, such as metals, oxides, sulfides, and carbon materials, through different methods including the in situ reduction method, the hot‐injection method, the heating‐up method, the hydro(solvo)thermal method, chemical vapor deposition (CVD), and thermal annealing. Here, recent progress in photocatalytic and electrocatalytic HERs using 2D TMD‐based composites as catalysts is discussed.     

Synergism of Geometric Construction and Electronic Regulation: 3D Se‐(NiCo)Sx/(OH)x Nanosheets for Highly Efficient Overall Water Splitting

The exploration of highly efficient electrocatalysts for both oxygen and hydrogen generation via water splitting is receiving considerable attention in recent decades. Up till now, Pt‐based catalysts still exhibit the best hydrogen evolution reaction (HER) performance and Ir/Ru‐based oxides are identified as the benchmark for oxygen evolution reaction (OER). However, the high cost and rarity of these materials extremely hinder their large‐scale applications. This paper describes the construction of the ultrathin defect‐enriched 3D Se‐(NiCo)S_x/(OH)_x nanosheets for overall water splitting through a facile Se‐induced hydrothermal treatment. Via Se‐induced fabrication, highly efficient Se‐(NiCo)S_x/(OH)_x nanosheets are successfully fabricated through morphology optimization, defect engineering, and electronic structure tailoring. The as‐prepared hybrids exhibit relatively low overpotentials of 155 and 103 mV at the current density of 10 mA cm^?2 for OER and HER, respectively. Moreover, an overall water‐splitting device delivers a current density of 10 mA cm^?2 for ≈66 h without obvious degradation.     

Composition and Interface Engineering of Alloyed MoS2xSe2(1–x) Nanotubes for Enhanced Hydrogen Evolution Reaction Activity

Hierarchical MoS_2xSe_2(1?x) nanotubes assembled from several‐layered nanosheets featuring tunable chalcogen compositions, expanded interlayer spacing and carbon modification, are synthesized for enhanced electrocatalytic hydrogen evolution reaction (HER). The chalcogen compositions of the MoS_2xSe_2(1?x) nanotubes are controllable by adjusting the selenization temperature and duration while the expanded (002) interlayer spacing varies from 0.98 to 0.68 nm. It is found that the MoS_2xSe_2(1?x) (x = 0.54) nanotubes with expanded interlayer spacing of 0.98 nm exhibit the highest electrocatalytic HER activity with a low onset potential of 101 mV and a Tafel slope of 55 mV dec^?1. The improved electrocatalytic performance is attributed to the chalcogen composition tuning and the interlayer distance expansion to achieve benefitting hydrogen adsorption energy. The present work suggests a potential way to design advanced HER electrocatalysts through modulating their compositions and interlayer distances.     

Wafer‐Scale and Low‐Temperature Growth of 1T‐WS2 Film for Efficient and Stable Hydrogen Evolution Reaction

The metallic 1T phase of WS₂ (1T‐WS₂), which boosts the charge transfer between the electron source and active edge sites, can be used as an efficient electrocatalyst for the hydrogen evolution reaction (HER). As the semiconductor 2H phase of WS₂ (2H‐WS₂) is inherently stable, methods for synthesizing 1T‐WS₂ are limited and complicated. Herein, a uniform wafer‐scale 1T‐WS₂ film is prepared using a plasma‐enhanced chemical vapor deposition (PE‐CVD) system. The growth temperature is maintained at 150 °C enabling the direct synthesis of 1T‐WS₂ films on both rigid dielectric and flexible polymer substrates. Both the crystallinity and number of layers of the as‐grown 1T‐WS₂ are verified by various spectroscopic and microscopic analyses. A distorted 1T structure with a 2a₀ × a₀ superlattice is observed using scanning transmission electron microscopy. An electrochemical analysis of the 1T‐WS₂ film demonstrates its similar catalytic activity and high durability as compared to those of previously reported untreated and planar 1T‐WS₂ films synthesized with CVD and hydrothermal methods. The 1T‐WS₂ does not transform to stable 2H‐WS₂, even after a 700 h exposure to harsh catalytic conditions and 1000 cycles of HERs. This synthetic strategy can provide a facile method to synthesize uniform 1T‐phase 2D materials for electrocatalysis applications.     

Monolayer Tungsten Disulfide (WS2) via Chlorine‐Driven Chemical Vapor Transport

Large‐scale production of high‐quality tungsten disulfide (WS₂) monolayers is a prerequisite for potential device applications using this promising transition metal dichalcogenide semiconductor. The most researched technique is chemical vapor deposition, typically involving the reaction of sulfur vapors with tungsten oxide. Other techniques such as physical vapor deposition have been explored with some success, but low vapor pressures make growth difficult. This study demonstrates a growth process that relies on halide‐driven vapor transport commonly utilized in bulk crystal growth. Using a small amount of sodium chloride salt as a source of chlorine, nonvolatile WS₂ can react to form gaseous tungsten chloride and sulfur. With an open tube system, a controlled reaction generates mono and few‐layer WS₂ crystals. Optical and physical characterization of the monolayer material shows good uniformity and triangular domains over 50 µm in length. Photoluminescence transient measurements show similar nonlinear exciton dynamics as exfoliated flakes, attributed to multiparticle physics. Requiring only the powder of the desired crystal and appropriate halide salt as precursors, the technique has the potential to realize other layered materials that are challenging to grow with current processes.     

Atomic‐Level Customization of 4 in. Transition Metal Dichalcogenide Multilayer Alloys for Industrial Applications

Despite many encouraging properties of transition metal dichalcogenides (TMDs), a central challenge in the realm of industrial applications based on TMD materials is to connect the large‐scale synthesis and reproducible production of highly crystalline TMD materials. Here, the primary aim is to resolve simultaneously the two inversely related issues through the synthesis of MoS_{2(1?x )}Se_2x ternary alloys with customizable bichalcogen atomic (S and Se) ratio via atomic‐level substitution combined with a solution‐based large‐area compatible approach. The relative concentration of bichalcogen atoms in the 2D alloy can be effectively modulated by altering the selenization temperature, resulting in 4 in. scale production of MoS_1.62Se_0.38, MoS_1.37Se_0.63, MoS_1.15Se_0.85, and MoS_0.46Se_1.54 alloys, as well as MoS₂ and MoSe₂. Comprehensive spectroscopic evaluations for vertical and lateral homogeneity in terms of heteroatom distribution in the large‐scale 2D TMD alloys are implemented. Se‐stimulated strain effects and a detailed mechanism for the Se substitution in the MoS₂ crystal are further explored. Finally, the capability of the 2D alloy for industrial application in nanophotonic devices and hydrogen evolution reaction (HER) catalysts is validated. Substantial enhancements in the optoelectronic and HER performances of the 2D ternary alloy compared with those of its binary counterparts, including pure‐phase MoS₂ and MoSe₂, are unambiguously achieved.     

Well‐Dispersed Nickel‐ and Zinc‐Tailored Electronic Structure of a Transition Metal Oxide for Highly Active Alkaline Hydrogen Evolution Reaction

The practical scale‐up of renewable energy technologies will require catalysts that are more efficient and durable than present ones. This is, however, a formidable challenge that will demand a new capability to tailor the electronic structure. Here, an original electronic structure tailoring of CoO by Ni and Zn dual doping is reported. This changes it from an inert material into one that is highly active for the hydrogen evolution reaction (HER). Based on combined density functional theory calculations and cutting‐edge characterizations, it is shown that dual Ni and Zn doping is responsible for a highly significant increase in HER activity of the host oxide. That is, the Ni dopants cluster around surface oxygen vacancy of the host oxide and provide an ideal electronic surface structure for hydrogen intermediate binding, while the Zn dopants distribute inside the host oxide and modulate the bulk electronic structure to boost electrical conduction. As a result, the dual‐doped Ni, Zn CoO nanorods achieve current densities of 10 and 20 mA cm^?2 at overpotentials of, respectively, 53 and 79 mV. This outperforms reported state‐of‐the‐art metal oxide, metal oxide/metal, metal sulfide, and metal phosphide catalysts.     

Synthesis of Ultrathin Metallic MTe2 (M = V,Nb, Ta) Single‐Crystalline Nanoplates

Two‐dimensional materials with intrinsic magnetism have recently drawn intense interest for both the fundamental studies and potential technological applications. However, the studies to date have been largely limited to mechanically exfoliated materials. Herein, an atmospheric pressure chemical vapor deposition route to ultrathin group VB metal telluride MTe₂ (M = V, Nb, Ta) nanoplates with thickness as thin as 3 nm is reported. It is shown that the resulting nanoplates can be systematically evolved from mostly thicker hexagonal domains to thinner triangular domains with an increasing flow rate of the carrier gas. X‐ray diffraction and transmission electron microscopy studies reveal MTe₂ (M = V, Nb, Ta) nanoplates are high‐quality single crystals. High‐resolution scanning transmission electron microscope imaging reveals the VTe₂ and NbTe₂ nanoplates adopt the hexagonal 1T phase and the TaTe₂ nanoplates show a monoclinic distorted 1T phase. Electronic transport studies show that MTe₂ single crystals exhibit metallic behavior. Magnetic measurements show that VTe₂ and NbTe₂ exhibit ferromagnetism and TaTe₂ shows paramagnetic behavior. The preparation of ultrathin few‐layered MTe₂ nanoplates will open up exciting opportunities for the burgeoning field of spintronics, sensors, and magneto‐optoelectronics.