Assembly of Foldable 3D Microstructures Using Graphene Hinges

Origami/kirigami-inspired 3D assembly approaches have recently attracted attention for a variety of applications, such as advanced optoelectronic devices and biomedical sensors. The results reported here describe an approach to construct classes of multiple foldable 3D microstructures that involve deformations that typical conductive materials, such as conventional metal films, cannot tolerate. Atomically thin graphene sheets serve as folding hinges during a process of 2D to 3D conversion via a deterministic buckling process. The exceptional mechanical properties of graphene enable the controlled, geometric transformation of a 2D precursor bonded at selective sites on a prestretched elastomer into folded 3D microstructures, in a reversible manner without adverse effects on the electrical properties. Experimental and computational investigations of the folding mechanisms for such types of 3D objects reveal the underlying physics and the dependence of the process on the thickness of the graphene/supporting films that define the hinges.     

Assembly and Self‐Assembly of Nanomembrane Materials—From 2D to 3D

Nanoscience and nanotechnology offer great opportunities and challenges in both fundamental research and practical applications, which require precise control of building blocks with micro/nanoscale resolution in both individual and mass‐production ways. The recent and intensive nanotechnology development gives birth to a new focus on nanomembrane materials, which are defined as structures with thickness limited to about one to several hundred nanometers and with much larger (typically at least two orders of magnitude larger, or even macroscopic scale) lateral dimensions. Nanomembranes can be readily processed in an accurate manner and integrated into functional devices and systems. In this Review, a nanotechnology perspective of nanomembranes is provided, with examples of science and applications in semiconductor, metal, insulator, polymer, and composite materials. Assisted assembly of nanomembranes leads to wrinkled/buckled geometries for flexible electronics and stacked structures for applications in photonics and thermoelectrics. Inspired by kirigami/origami, self‐assembled 3D structures are constructed via strain engineering. Many advanced materials have begun to be explored in the format of nanomembranes and extend to biomimetic and 2D materials for various applications. Nanomembranes, as a new type of nanomaterials, allow nanotechnology in a controllable and precise way for practical applications and promise great potential for future nanorelated products.     

A 3D Magnetic Hyaluronic Acid Hydrogel for Magnetomechanical Neuromodulation of Primary Dorsal Root Ganglion Neurons

Neuromodulation tools are useful to decipher and modulate neural circuitries implicated in functions and diseases. Existing electrical and chemical tools cannot offer specific neural modulation while optogenetics has limitations for deep tissue interfaces, which might be overcome by miniaturized optoelectronic devices in the future. Here, a 3D magnetic hyaluronic hydrogel is described that offers noninvasive neuromodulation via magnetomechanical stimulation of primary dorsal root ganglion (DRG) neurons. The hydrogel shares similar biochemical and biophysical properties as the extracellular matrix of spinal cord, facilitating healthy growth of functional neurites and expression of excitatory and inhibitory ion channels. By testing with different neurotoxins, and micropillar substrate deflections with electrophysical recordings, it is found that acute magnetomechanical stimulation induces calcium influx in DRG neurons primarily via endogenous, mechanosensitive TRPV4 and PIEZO2 channels. Next, capitalizing on the receptor adaptation characteristic of DRG neurons, chronic magnetomechanical stimulation is performed and found that it reduces the expression of PIEZO2 channels, which can be useful for modulating pain where mechanosensitive channels are typically overexpressed. A general strategy is thus offered for neuroscientists and material scientists to fabricate 3D magnetic biomaterials tailored to different types of excitable cells for remote magnetomechanical modulation.     

Rapid,Controllable Fabrication of Regular Complex Microarchitectures by Capillary Assembly of Micropillars and Their Application in Selectively Trapping/Releasing Microparticles

A simple strategy to realize new controllable 3D microstructures and a novel method to reversibly trapping and releasing microparticles are reported. This technique controls the height, shape, width, and arrangement of pillar arrays and realizes a series of special microstructures from 2‐pillar‐cell to 12 cell arrays, S‐shape, chain‐shape and triangle 3‐cell arrays by a combined top down/bottom up method: laser interference lithography and capillary force‐induced assembly. Due to the inherent features of this method, the whole time is less than 3 min and the fabricated area determined by the size of the laser beam can reach as much as 1 cm², which shows this method is very simple, rapid, and high‐throughput. It is further demonstrated that the ‘mechanical hand’‐like 4‐cell arrays could be used to selectively trap/release microparticles with different sizes, e.g., 1.5, 2, or 3.5 μm, which are controlled by the period of the microstructures from 2.5 to 4 μm, and 6 μm. Finally, the ‘mechanical hand’‐like 4‐cell arrays are integrated into 100 μm‐width microfluidic channels prepared by ultraviolet photolithography, which shows that this technique is compatible with conventional microfabrication methods for on‐chip applications.     

Near‐Infrared Light‐Sensitive Polyvinyl Alcohol Hydrogel Photoresist for Spatiotemporal Control of Cell‐Instructive 3D Microenvironments

Advanced hydrogel systems that allow precise control of cells and their 3D microenvironments are needed in tissue engineering, disease modeling, and drug screening. Multiphoton lithography (MPL) allows true 3D microfabrication of complex objects, but its biological application requires a cell‐compatible hydrogel resist that is sufficiently photosensitive, cell‐degradable, and permissive to support 3D cell growth. Here, an extremely photosensitive cell‐responsive hydrogel composed of peptide‐crosslinked polyvinyl alcohol (PVA) is designed to expand the biological applications of MPL. PVA hydrogels are formed rapidly by ultraviolet light within 1 min in the presence of cells, providing fully synthetic matrices that are instructive for cell‐matrix remodeling, multicellular morphogenesis, and protease‐mediated cell invasion. By focusing a multiphoton laser into a cell‐laden PVA hydrogel, cell‐instructive extracellular cues are site‐specifically attached to the PVA matrix. Cell invasion is thus precisely guided in 3D with micrometer‐scale spatial resolution. This robust hydrogel enables, for the first time, ultrafast MPL of cell‐responsive synthetic matrices at writing speeds up to 50 mm s^?1. This approach should enable facile photochemical construction and manipulation of 3D cellular microenvironments with unprecedented flexibility and precision.     

Direct Fabrication of Freestanding and Patterned Nanoporous Junctions in a 3D Micro‐Nanofluidic Device for Ion‐Selective Transport

In the field of micro‐nanofluidics, a freestanding configuration of a nanoporous junction is highly demanded to increase the design flexibility of the microscale device and the interfacial area between the nanoporous junction and microchannels, thereby improving the functionality and performance. This work first reports direct fabrication and incorporation of a freestanding nanoporous junction in a microfluidic device by performing an electrolyte‐assisted electrospinning process to fabricate a freestanding nanofiber membrane and subsequently impregnating the nanofiber membrane with a nanoporous precursor material followed by a solidification process. This process also enables to readily control the geometry of the nanoporous junction depending on its application. By these advantages, vertically stacked 3D micro‐nanofluidic devices with complex configurations are easily achieved. To demonstrate the broad applicability of this process in various research fields, a reverse electrodialysis‐based energy harvester and an ion concentration polarization‐based preconcentrator are produced. The freestanding Nafion‐polyvinylidene fluoride nanofiber membrane (F‐NPNM) energy harvester generates a high power (59.87 nW) owing to the enlarged interfacial area. Besides, 3D multiplexed and multi‐stacked F‐NPNM preconcentrators accumulate multiple preconcentrated plugs that can increase the operating sample volume and the degree of freedom of handling. Hence, the proposed process is expected to contribute to numerous research fields related to micro‐nanofluidics in the future.