A New Type of Li‐Rich Rock‐Salt Oxide Li2Ni1/3Ru2/3O3 with Reversible Anionic Redox Chemistry

Li‐rich oxide cathodes are of prime importance for the development of high‐energy lithium‐ion batteries (LIBs). Li‐rich layered oxides, however, always undergo irreversible structural evolution, leading to inevitable capacity and voltage decay during cycling. Meanwhile, Li‐rich cation‐disordered rock‐salt oxides usually exhibit sluggish kinetics and inferior cycling stability, despite their firm structure and stable voltage output. Herein, a new Li‐rich rock‐salt oxide Li₂Ni_1/3Ru_2/3O₃ with Fd‐3m space group, where partial cation‐ordering arrangement exists in cationic sites, is reported. Results demonstrate that a cathode fabricated from Li₂Ni_1/3Ru_2/3O₃ delivers a large capacity, outstanding rate capability as well as good cycling performance with negligible voltage decay, in contrast to the common cations disordered oxides with space group Fm‐3m. First principle calculations also indicate that rock‐salt oxide with space group Fd‐3m possesses oxygen activity potential at the state of delithiation, and good kinetics with more 0‐TM (TM = transition metals) percolation networks. In situ Raman results confirm the reversible anionic redox chemistry, confirming O^2?/O^? evolution during cycles in Li‐rich rock‐salt cathode for the first time. These findings open up the opportunity to design high‐performance oxide cathodes and promote the development of high‐energy LIBs.     

In Situ Chelating Synthesis of Hierarchical LiNi1/3Co1/3Mn1/3O2 Polyhedron Assemblies with Ultralong Cycle Life for Li‐Ion Batteries

Layered lithium transition‐metal oxides, with large capacity and high discharge platform, are promising cathode materials for Li‐ion batteries. However, their high‐rate cycling stability still remains a large challenge. Herein, hierarchical LiNi_1/3Co_1/3Mn_1/3O₂ polyhedron assemblies are obtained through in situ chelation of transition metal ions (Ni²⁺, Co²⁺, and Mn²⁺) with amide groups uniformly distributed along the backbone of modified polyacrylonitrile chains to achieve intimate mixing at the atomic level. The assemblies exhibit outstanding electrochemical performances: superior rate capability, high volumetric energy density, and especially ultralong high‐rate cyclability, due to the superiority of unique hierarchical structures. The polyhedrons with exposed active crystal facets provide more channels for Li⁺ diffusion, and meso/macropores serve as access shortcuts for fast migration of electrolytes, Li⁺ and electrons. The strategy proposed in this work can be extended to fabricate other mixed transition metal‐based materials for advanced batteries.     

An Ordered Ni6‐Ring Superstructure Enables a Highly Stable Sodium Oxide Cathode

Sodium‐based layered oxides are among the leading cathode candidates for sodium‐ion batteries, toward potential grid energy storage, having large specific capacity, good ionic conductivity, and feasible synthesis. Despite their excellent prospects, the performance of layered intercalation materials is affected by both a phase transition induced by the gliding of the transition metal slabs and air‐exposure degradation within the Na layers. Here, this problem is significantly mitigated by selecting two ions with very different M? O bond energies to construct a highly ordered Ni₆‐ring superstructure within the transition metal layers in a model compound (NaNi_2/3Sb_1/3O₂). By virtue of substitution of 1/3 nickel with antimony in NaNiO₂, the existence of these ordered Ni₆‐rings with super‐exchange interaction to form a symmetric atomic configuration and degenerate electronic orbital in layered oxides can not only largely enhance their air stability and thermal stability, but also increase the redox potential and simplify the phase‐transition process during battery cycling. The findings reveal that the ordered Ni₆‐ring superstructure is beneficial for constructing highly stable layered cathodes and calls for new paradigms for better design of layered materials.     

Synthetic Control of Kinetic Reaction Pathway and Cationic Ordering in High‐Ni Layered Oxide Cathodes

Nickel‐rich layered transition metal oxides, LiNi_1?x (MnCo)_x O₂ (1?x ≥ 0.5), are appealing candidates for cathodes in next‐generation lithium‐ion batteries (LIBs) for electric vehicles and other large‐scale applications, due to their high capacity and low cost. However, synthetic control of the structural ordering in such a complex quaternary system has been a great challenge, especially in the presence of high Ni content. Herein, synthesis reactions for preparing layered LiNi_0.7Mn_0.15Co_0.15O₂ (NMC71515) by solid‐state methods are investigated through a combination of time‐resolved in situ high‐energy X‐ray diffraction and absorption spectroscopy measurements. The real‐time observation reveals a strong temperature dependence of the kinetics of cationic ordering in NMC71515 as a result of thermal‐driven oxidation of transition metals and lithium/oxygen loss that concomitantly occur during heat treatment. Through synthetic control of the kinetic reaction pathway, a layered NMC71515 with low cationic disordering and a high reversible capacity is prepared in air. The findings may help to pave the way for designing high‐Ni layered oxide cathodes for LIBs.     

Direct Visualization of the Reversible O2−/O− Redox Process in Li‐Rich Cathode Materials

Conventional cathodes of Li‐ion batteries mainly operate through an insertion–extraction process involving transition metal redox. These cathodes will not be able to meet the increasing requirements until lithium‐rich layered oxides emerge with beyond‐capacity performance. Nevertheless, in‐depth understanding of the evolution of crystal and excess capacity delivered by Li‐rich layered oxides is insufficient. Herein, various in situ technologies such as X‐ray diffraction and Raman spectroscopy are employed for a typical material Li_1.2Ni_0.2Mn_0.6O₂, directly visualizing O^?? O^? (peroxo oxygen dimers) bonding mostly along the c‐axis and demonstrating the reversible O^2?/O^? redox process. Additionally, the formation of the peroxo O? O bond is calculated via density functional theory, and the corresponding O? O bond length of ≈1.3 Å matches well with the in situ Raman results. These findings enrich the oxygen chemistry in layered oxides and open opportunities to design high‐performance positive electrodes for lithium‐ion batteries.     

Suppressing Surface Lattice Oxygen Release of Li‐Rich Cathode Materials via Heterostructured Spinel Li4Mn5O12 Coating

Lithium‐rich layered oxides with the capability to realize extraordinary capacity through anodic redox as well as classical cationic redox have spurred extensive attention. However, the oxygen‐involving process inevitably leads to instability of the oxygen framework and ultimately lattice oxygen release from the surface, which incurs capacity decline, voltage fading, and poor kinetics. Herein, it is identified that this predicament can be diminished by constructing a spinel Li₄Mn₅O₁₂ coating, which is inherently stable in the lattice framework to prevent oxygen release of the lithium‐rich layered oxides at the deep delithiated state. The controlled KMnO₄ oxidation strategy ensures uniform and integrated encapsulation of Li₄Mn₅O₁₂ with structural compatibility to the layered core. With this layer suppressing oxygen release, the related phase transformation and catalytic side reaction that preferentially start from the surface are consequently hindered, as evidenced by detailed structural evolution during Li⁺ extraction/insertion. The heterostructure cathode exhibits highly competitive energy‐storage properties including capacity retention of 83.1% after 300 cycles at 0.2 C, good voltage stability, and favorable kinetics. These results highlight the essentiality of oxygen framework stability and effectiveness of this spinel Li₄Mn₅O₁₂ coating strategy in stabilizing the surface of lithium‐rich layered oxides against lattice oxygen escaping for designing high‐performance cathode materials for high‐energy‐density lithium‐ion batteries.     

Recent Progress of Layered Transition Metal Oxide Cathodes for Sodium‐Ion Batteries

Sodium‐ion batteries (SIBs) are attracting increasing attention and considered to be a low‐cost complement or an alternative to lithium‐ion batteries (LIBs), especially for large‐scale energy storage. Their application, however, is limited because of the lack of suitable host materials to reversibly intercalate Na⁺ ions. Layered transition metal oxides (Na_xMO₂, M = Fe, Mn, Ni, Co, Cr, Ti, V, and their combinations) appear to be promising cathode candidates for SIBs due to their simple structure, ease of synthesis, high operating potential, and feasibility for commercial production. In the present work, the structural evolution, electrochemical performance, and recent progress of Na_xMO₂ as cathode materials for SIBs are reviewed and summarized. Moreover, the existing drawbacks are discussed and several strategies are proposed to help alleviate these issues. In addition, the exploration of full cells based on Na_xMO₂ cathodes and future perspectives are discussed to provide guidance for the future commercialization of such systems.     

A High‐Capacity O2‐Type Li‐Rich Cathode Material with a Single‐Layer Li2MnO3 Superstructure

A high capacity cathode is the key to the realization of high‐energy‐density lithium‐ion batteries. The anionic oxygen redox induced by activation of the Li₂MnO₃ domain has previously afforded an O3‐type layered Li‐rich material used as the cathode for lithium‐ion batteries with a notably high capacity of 250–300 mAh g^?1. However, its practical application in lithium‐ion batteries has been limited due to electrodes made from this material suffering severe voltage fading and capacity decay during cycling. Here, it is shown that an O2‐type Li‐rich material with a single‐layer Li₂MnO₃ superstructure can deliver an extraordinary reversible capacity of 400 mAh g^?1 (energy density: ≈1360 Wh kg^?1). The activation of a single‐layer Li₂MnO₃ enables stable anionic oxygen redox reactions and leads to a highly reversible charge–discharge cycle. Understanding the high performance will further the development of high‐capacity cathode materials that utilize anionic oxygen redox processes.     

Construction of 3D Electronic/Ionic Conduction Networks for All‐Solid‐State Lithium Batteries

High and balanced electronic and ionic transportation networks with nanoscale distribution in solid‐state cathodes are crucial to realize high‐performance all‐solid‐state lithium batteries. Using Cu₂SnS₃ as a model active material, such a kind of solid‐state Cu₂SnS₃@graphene‐Li₇P₃S₁₁ nanocomposite cathodes are synthesized, where 5–10 nm Cu₂SnS₃ nanoparticles homogenously anchor on the graphene nanosheets, while the Li₇P₃S₁₁ electrolytes uniformly coat on the surface of Cu₂SnS₃@graphene composite forming nanoscaled electron/ion transportation networks. The large amount of nanoscaled triple‐phase boundary in cathode ensures high power density due to high ionic/electronic conductions and long cycle life due to uniform and reduced volume change of nano‐Cu₂SnS_3. The Cu₂SnS₃@graphene‐Li₇P₃S₁₁ cathode layer with 2.0 mg cm^?2 loading in all‐solid‐state lithium batteries demonstrates a high reversible discharge specific capacity of 813.2 mAh g^?1 at 100 mA g^?1 and retains 732.0 mAh g^?1 after 60 cycles, corresponding to a high energy density of 410.4 Wh kg^?1 based on the total mass of Cu₂SnS₃@graphene‐Li₇P₃S₁₁ composite based cathode. Moreover, it exhibits excellent rate capability and high‐rate cycling stability, showing reversible capacity of 363.5 mAh g^?1 at 500 mA g^?1 after 200 cycles. The study provides a new insight into constructing both electronic and ionic conduction networks for all‐solid‐state lithium batteries.     

O3‐Type Layered Ni‐Rich Oxide: A High‐Capacity and Superior‐Rate Cathode for Sodium‐Ion Batteries

Inspired by its high‐active and open layered framework for fast Li⁺ extraction/insertion reactions, layered Ni‐rich oxide is proposed as an outstanding Na‐intercalated cathode for high‐performance sodium‐ion batteries. An O3‐type Na_0.75Ni_0.82Co_0.12Mn_0.06O₂ is achieved through a facile electrochemical ion‐exchange strategy in which Li⁺ ions are first extracted from the LiNi_0.82Co_0.12Mn_0.06O₂ cathode and Na⁺ ions are then inserted into a layered oxide framework. Furthermore, the reaction mechanism of layered Ni‐rich oxide during Na⁺ extraction/insertion is investigated in detail by combining ex situ X‐ray diffraction, X‐ray photoelectron spectroscopy, and electron energy loss spectroscopy. As an excellent cathode for Na‐ion batteries, O3‐type Na_0.75Ni_0.82Co_0.12Mn_0.06O₂ delivers a high reversible capacity of 171 mAh g^?1 and a remarkably stable discharge voltage of 2.8 V during long‐term cycling. In addition, the fast Na⁺ transport in the cathode enables high rate capability with 89 mAh g^?1 at 9 C. The as‐prepared Ni‐rich oxide cathode is expected to significantly break through the limited performance of current sodium‐ion batteries.     

Critical Role of Cations in Lithium Sites on Extended Electrochemical Reversibility of Co‐Rich Layered Oxide

Only a very limited amount of the high theoretical energy density of LiCoO₂ as a cathode material has been realized, due to its irreversible deterioration when more than 0.6 mol of lithium ions are extracted. In this study, new insights into the origin of such low electrochemical reversibility, namely the structural collapse caused by electrostatic repulsion between oxygen ions during the charge process are suggested. By incorporating the partial cation migration of LiNiO₂, which produces a screen effect of cations in the 3b‐Li site, the phase distortion of LiCoO₂ is successfully delayed which in turn expands its electrochemical reversibility. This study elucidates the relationship between the structural reversibility and electrochemical behavior of layered cathode materials and enables new design of Co‐rich layered materials for cathodes with high energy density.     

Role of Redox‐Inactive Transition‐Metals in the Behavior of Cation‐Disordered Rocksalt Cathodes

Owing to the capacity boost from oxygen redox activities, Li‐rich cation‐disordered rocksalts (LRCDRS) represent a new class of promising high‐energy Li‐ion battery cathode materials. Redox‐inactive transition‐metal (TM) cations, typically d⁰ TM, are essential in the formation of rocksalt phases, however, their role in electrochemical performance and cathode stability is largely unknown. In the present study, the effect of two d⁰ TM (Nb⁵⁺ and Ti⁴⁺) is systematically compared on the redox chemistry of Mn‐based model LRCDRS cathodes, namely Li_1.3Nb_0.3Mn_0.4O₂ (LNMO), Li_1.25Nb_0.15Ti_0.2Mn_0.4O₂ (LNTMO), and Li_1.2Ti_0.4Mn_0.4O₂ (LTMO). Although electrochemically inactive, d⁰ TM serves as a modulator for oxygen redox, with Nb⁵⁺ significantly enhancing initial charge storage contribution from oxygen redox. Further studies using differential electrochemical mass spectroscopy and resonant inelastic X‐ray scattering reveal that Ti⁴⁺ is better in stabilizing the oxidized oxygen anions (O^n?, 0 < n < 2), leading to a more reversible O redox process with less oxygen gas release. As a result, much improved chemical, structural and cycling stabilities are achieved on LTMO. Detailed evaluation on the effect of d⁰ TM on degradation mechanism further suggests that proper design of redox‐inactive TM cations provides an important avenue to balanced capacity and stability in this newer class of cathode materials.     

Developments in Nanostructured Cathode Materials for High‐Performance Lithium‐Ion Batteries

Nanostructured materials lie at the heart of fundamental advances in efficient energy storage and/or conversion, in which surface processes and transport kinetics play determining roles. This Review describes some recent developments in the synthesis and characterization of nanostructured cathode materials, including lithium transition metal oxides, vanadium oxides, manganese oxides, lithium phosphates, and various nanostructured composites. The major goal of this Review is to highlight some new progress in using these nanostructured materials as cathodes to develop lithium batteries with high energy density, high rate capability, and excellent cycling stability resulting from their huge surface area, short distance for mass and charge transport, and freedom for volume change in nanostructured materials.     

Ti‐Substituted NaNi0.5Mn0.5‐xTixO2 Cathodes with Reversible O3−P3 Phase Transition for High‐Performance Sodium‐Ion Batteries

Sodium‐ion batteries (SIBs) have been considered as potential candidates for stationary energy storage because of the low cost and wide availability of Na sources. O3‐type layered oxides have been considered as one of the most promising cathodes for SIBs. However, they commonly show inevitable complicated phase transitions and sluggish kinetics, incurring rapid capacity decline and poor rate capability. Here, a series of sodium‐sufficient O3‐type NaNi_0.5Mn_{0.5‐ x} Ti _x O₂ (0 ≤ x ≤ 0.5) cathodes for SIBs is reported and the mechanisms behind their excellent electrochemical performance are studied in comparison to those of their respective end‐members. The combined analysis of in situ X‐ray diffraction, ex situ X‐ray absorption spectroscopy, and scanning transmission electron microscopy for NaNi_0.5Mn_0.2Ti_0.3O₂ reveals that the O3‐type phase transforms reversibly into a P3‐type phase upon Na+ deintercalation/intercalation. The substitution of Ti for Mn enlarges interslab distance and could restrain the unfavorable and irreversible multiphase transformation in the high voltage regions that is usually observed in O3‐type NaNi_0.5Mn_0.5O₂, resulting in improved Na cell performance. This integration of macroscale and atomicscale engineering strategy might open up the modulation of the chemical and physical properties in layered oxides and grasp new insight into the optimal design of high‐performance cathode materials for SIBs.     

Li‐Rich Li[Li1/6Fe1/6Ni1/6Mn1/2]O2 (LFNMO) Cathodes: Atomic Scale Insight on the Mechanisms of Cycling Decay and of the Improvement due to Cobalt Phosphate Surface Modification

Lithium‐rich Li[Li_1/6Fe_1/6Ni_1/6Mn_1/2]O₂ (0.4Li₂MnO₃‐0.6LiFe_1/3Ni_1/3Mn_1/3O₂, LFNMO) is a new member of the xLi₂MnO₃·(1 ? x)LiMO₂ family of high capacity–high voltage lithium‐ion battery (LIB) cathodes. Unfortunately, it suffers from the severe degradation during cycling both in terms of reversible capacity and operating voltage. Here, the corresponding degradation occurring in LFNMO at an atomic scale has been documented for the first time, using high‐angle annular dark‐field scanning transmission electron microscopy (HAADF‐STEM), as well as tracing the elemental crossover to the Li metal anode using X‐ray photoelectron spectroscopy (XPS). It is also demonstrated that a cobalt phosphate surface treatment significantly boosts LFNMO cycling stability and rate capability. Due to cycling, the unmodified LFNMO undergoes extensive elemental dissolution (especially Mn) and O loss, forming Kirkendall‐type voids. The associated structural degradation is from the as‐synthesized R‐3m layered structure to a disordered rock‐salt phase. Prior to cycling, the cobalt phosphate coating is epitaxial, sharing the crystallography of the parent material. During cycling, a 2–3 nm thick disordered Co‐rich rock‐salt structure is formed as the outer shell, while the bulk material retains R‐3m crystallography. These combined cathode–anode findings significantly advance the microstructural design principles for next‐generation Li‐rich cathode materials and coatings.     

Exposing {010} Active Facets by Multiple‐Layer Oriented Stacking Nanosheets for High‐Performance Capacitive Sodium‐Ion Oxide Cathode

As one of the most promising cathodes for rechargeable sodium‐ion batteries (SIBs), O3‐type layered transition metal oxides commonly suffer from inevitably complicated phase transitions and sluggish kinetics. Here, a Na[Li_0.05Ni_0.3Mn_0.5Cu_0.1Mg_0.05]O₂ cathode material with the exposed {010} active facets by multiple‐layer oriented stacking nanosheets is presented. Owing to reasonable geometrical structure design and chemical substitution, the electrode delivers outstanding rate performance (71.8 mAh g^?1 and 16.9 kW kg^?1 at 50C), remarkable cycling stability (91.9% capacity retention after 600 cycles at 5C), and excellent compatibility with hard carbon anode. Based on the combined analyses of cyclic voltammograms, ex situ X‐ray absorption spectroscopy, and operando X‐ray diffraction, the reaction mechanisms behind the superior electrochemical performance are clearly articulated. Surprisingly, Ni²⁺/Ni³⁺ and Cu²⁺/Cu³⁺ redox couples are simultaneously involved in the charge compensation with a highly reversible O3–P3 phase transition during charge/discharge process and the Na⁺ storage is governed by a capacitive mechanism via quantitative kinetics analysis. This optimal bifunctional regulation strategy may offer new insights into the rational design of high‐performance cathode materials for SIBs.     

Birnessite Nanosheet Arrays with High K Content as a High‐Capacity and Ultrastable Cathode for K‐Ion Batteries

Potassium‐ion batteries (PIBs) are one of the emerging energy‐storage technologies due to the low cost of potassium and theoretically high energy density. However, the development of PIBs is hindered by the poor K⁺ transport kinetics and the structural instability of the cathode materials during K⁺ intercalation/deintercalation. In this work, birnessite nanosheet arrays with high K content (K_0.77MnO₂?0.23H₂O) are prepared by “hydrothermal potassiation” as a potential cathode for PIBs, demonstrating ultrahigh reversible specific capacity of about 134 mAh g^?1 at a current density of 100 mA g^?1, as well as great rate capability (77 mAh g^?1 at 1000 mA g^?1) and superior cycling stability (80.5% capacity retention after 1000 cycles at 1000 mA g^?1). With the introduction of adequate K⁺ ions in the interlayer, the K‐birnessite exhibits highly stabilized layered structure with highly reversible structure variation upon K⁺ intercalation/deintercalation. The practical feasibility of the K‐birnessite cathode in PIBs is further demonstrated by constructing full cells with a hard–soft composite carbon anode. This study highlights effective K⁺‐intercalation for birnessite to achieve superior K‐storage performance for PIBs, making it a general strategy for developing high‐performance cathodes in rechargeable batteries beyond lithium‐ion batteries.     

Rational design of thermally stable polymorphic layered cathode materials for next generation lithium rechargeable batteries

Classical layered transition metal oxides have remained the preferred cathode materials for commercial lithium-ion batteries. Variation in the transition metal composition and local ordering can greatly affect the structure stability. In classical layered cathodes, high concentrations of electrochemically inert Mn elements usually act as a pillar to stabilize the structure. When excess amount of Li and Mn are present in the layered structure, the capacity of the Li-rich layered oxide (molar ratio of lithium over transition metal is larger than one by design) can exceed that expected from transition metal redox. However, the over lithiation in the classical layered structure results in safety issues, which remains challenging for the commercialization of Li-rich layered oxides. To characterize the safety performance of a series of Li-rich layered cathodes, we utilize differential scanning calorimeter and thermal gravimetric analysis; this is coupled with local structural changes using in situ temperature dependent synchrotron X-ray diffraction and X-ray adsorption spectroscopy. These methods demonstrate that the gradual decrease of the Mn–M (M = Ni, Co, Mn and Li) coordination number directly reduces structural stability and accelerates oxygen release. For safety characterization tests in practice, we evaluate the thermal runaway process through accelerating rate calorimeter in 1.0 Ah pouch cells to confirm this trend. Using the insights obtained in this work, we design a polymorphic composition to improve the thermal stability of Li-rich layered cathode material, which outperforms Ni-rich layered oxides in terms of both electrochemical and safety performances.     

A Metal‐Free,Free‐Standing,Macroporous Graphene@g‐C3N4 Composite Air Electrode for High‐Energy Lithium Oxygen Batteries

The nonaqueous lithium oxygen battery is a promising candidate as a next‐generation energy storage system because of its potentially high energy density (up to 2–3 kW kg^?1), exceeding that of any other existing energy storage system for storing sustainable and clean energy to reduce greenhouse gas emissions and the consumption of nonrenewable fossil fuels. To achieve high energy density, long cycling stability, and low cost, the air electrode structure and the electrocatalysts play important roles. Here, a metal‐free, free‐standing macroporous graphene@graphitic carbon nitride (g‐C₃N₄) composite air cathode is first reported, in which the g‐C₃N₄ nanosheets can act as efficient electrocatalysts, and the macroporous graphene nanosheets can provide space for Li₂O₂ to deposit and also promote the electron transfer. The electrochemical results on the graphene@g‐C₃N₄ composite air electrode show a 0.48 V lower charging plateau and a 0.13 V higher discharging plateau than those of pure graphene air electrode, with a discharge capacity of nearly 17300 mA h g^?1 _(composite). Excellent cycling performance, with terminal voltage higher than 2.4 V after 105 cycles at 1000 mA h g^?1 _(composite) capacity, can also be achieved. Therefore, this hybrid material is a promising candidate for use as a high energy, long‐cycle‐life, and low‐cost cathode material for lithium oxygen batteries.     

A Flexible Film toward High‐Performance Lithium Storage: Designing Nanosheet‐Assembled Hollow Single‐Hole Ni–Co–Mn–O Spheres with Oxygen Vacancy Embedded in 3D Carbon Nanotube/Graphene Network

Ternary transition metal oxides (TMOs) are highly potential electrode materials for lithium ion batteries (LIBs) due to abundant defects and synergistic effects with various metal elements in a single structure. However, low electronic/ionic conductivity and severe volume change hamper their practical application for lithium storage. Herein, nanosheet‐assembled hollow single‐hole Ni–Co–Mn oxide (NHSNCM) spheres with oxygen vacancies can be obtained through a facile hydrothermal reaction, which makes both ends of each nanosheet exposed to sufficient free space for volume variation, electrolyte for extra active surface area, and dual ion diffusion paths compared with airtight hollow structures. Furthermore, oxygen vacancies could improve ion/electronic transport and ion insertion/extraction process of NHSNCM spheres. Thus, oxygen‐vacancy‐rich NHSNCM spheres embedded into a 3D porous carbon nanotube/graphene network as the anode film ensure efficient electrolyte infiltration into both the exterior and interior of porous and open spheres for a high utilization of the active material, showing an excellent electrochemical performance for LIBs (1595 mAh g^?1 over 300 cycles at 2 A g^?1, 441.6 mAh g^?1 over 4000 cycles at 10 A g^?1). Besides, this straightforward synthetic method opens an efficacious avenue for the construction of various nanosheet‐assembled hollow single‐hole TMO spheres for potential applications.