A compact and wideband array antenna with efficient hybrid feed network

This study presents a high‐efficient, compact, and broadband microstrip patch antennas (MPAs) based on substrate‐integrated waveguide (SIW) for X‐band applications. The proposed array consists of three stacked layers from top to bottom, including one layer as the antenna layer and two SIW layers as a feeding network. The performance was focused on improving the impedance bandwidth and radiation efficiency by mitigating the loss from the feed network while also maintaining the compact design. To this end, the SIW feeding network was designed to feed the MPA to save the physical aperture size which resulted in a more compact and efficient radiating structure. The overall size of the proposed array is compact and extra surface area around the radiation aperture has not been occupied. The measured ?10 dB impedance bandwidth span is from 8.9 to 10.9 GHz (20.2%). The maximum measured gain at 10.6 GHz is 10.6 dBi. The results show that the simulated radiation efficiency and the measured aperture efficiency are more than 75% and 50%, respectively. The fabricated array exhibits great advantages such as wide operating bandwidth, lightweight, low‐cost, high aperture efficiency, high radiation efficiency, and compactness which make it a good candidate for X‐band applications.     

Highly efficient and ultra-compact micro-LED pico-projector based on a microlens array

Pico-projection displays are the main developing direction for future projection displays, but the balance between the optical efficiency and the system size is still a big concern. This paper presents a pico-projector design based on micro-LED (μLED) light sources. Firstly, based on the analysis of the characteristics of μLED, a highly integrated microlens array is designed to improve the system efficiency by reshaping the spatial light distribution. In addition, the matching relationship between the aperture angle of projection lens and the divergence angle of μLED is studied, and on this basis, a set of four-piece spherical lens group is proposed to achieve compact size. Simulation results show that the μLED equipped with the microlens array can concentrate about 86% of the light energy within a dispersion angle of ±20°, thus increasing the light energy utilization by about 3.5 times and reducing the size of the pico-projector to 30.18 mm³. The designed pico-projector has high performance and compact size with great potential for future applications.     

The density algorithm for pairwise interaction testing

There are many published algorithms for generating interaction test suites for software testing, exemplified by AETG, IPO, TCG, TConfig, simulated annealing and other heuristic search, and combinatorial design techniques. Among these, greedy one‐test‐at‐a‐time methods (such as AETG and TCG) have proven to be a reasonable compromise between the needs for small test suites, fast test‐suite generation, and flexibility to accommodate a variety of testing scenarios. However, such methods suffer from the lack of a worst‐case logarithmic guarantee on test suite size, while methods that provide such a guarantee at present are less efficient or flexible, or do not produce test suites that are competitive in size for practical testing scenarios. In this paper, a new algorithm establishes that efficient, greedy, one‐test‐at‐a‐time methods can indeed produce a logarithmic worst‐case guarantee on the test suite size. In addition, this can be done while still producing test suites that are of competitive size, and in a time that is comparable to the published methods. It is deterministic, guaranteeing reproducibility. It generates only one candidate test at a time, permits users to ‘seed’ the test suite with specified tests, and allows users to specify constraints of combinations that should be avoided. Further, statistical analysis examines the impact of five variables used to tune this density algorithm for execution time and test suite size: weighting of density for factors, scaling of density, tie‐breaking, use of multiple candidates, and multiple repetitions using randomization. Copyright © 2007 John Wiley & Sons, Ltd.     

Ka‐band phased patch array antenna integrated with a PET‐controlled phase shifter

In this article, a 4 × 4 linear‐phased patch array antenna, consisting of four 1 × 4 patch subarrays and a true time‐delay multiline phase shifter, is proposed on a thin film liquid crystal polymer substrate at Ka‐band. The patch antenna is designed with a gain of 6 dBi at 35 GHz and a bandwidth of 23% centered at 35 GHz. To enhance the gain and symmetrize the beam patterns of the 4 × 4 array, a 1 × 4 patch subarray in the E‐plane was designed and characterized. The subarray produces an enhanced gain of 11 dBi and a wide beamwidth of ±38° in the H‐plane for beam steering. The proposed phase shifter comprises a 1 × 4 microstrip line power splitter and a piezoelectric transducer‐controlled phase perturber. A large phase variation of up to 370° and a low insertion loss of less than 2 dB were demonstrated for the phase shifter at Ka‐band. The integrated phased array attains a gain of 15.6 dBi, and a continuous true‐time delay beam steering of up to 33 ± 1° from 31 to 39 GHz. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 26:199–208, 2016.     

An optimal circular antenna array design considering mutual coupling using heuristic approaches

This article shows the design of a non‐uniformly excited single ring circular antenna array (CAA) for the synthesis of optimal far‐field radiation characteristics. A recently proposed meta‐heuristic based optimization algorithm called gray wolf optimization (GWO) and state‐of‐the‐art swarm intelligence based evolutionary optimization technique known as particle swarm optimization with a distribution based update mechanism (PSOd) are individually applied to determine the optimum set of current excitation amplitude weights and the inter‐element spacing among the array elements to reduce the side lobe level and 3‐dB beamwidth considering the mutual coupling. The results obtained by employing PSOd and GWO are compared to those of the uniform radiation pattern and the recently published results of state‐of‐the‐art literature having equal sets of elements to show the superiority of employed approaches. Three different design examples of 8, 10, and 12 elements CAA are reported in this article to study the performances of PSOd and GWO algorithm‐based results over the results of other recently reported literature.