Core–Shell Structure of Hierarchical Quasi‐Hollow MoS2 Microspheres Encapsulated Porous Carbon as Stable Anode for Li‐Ion Batteries

Monodisperse sulfonated polystyrene (SPS) microspheres are employed as both the template and carbon source to prepare MoS₂ quasi‐hollow microspheres‐encapsulated porous carbon. The synthesis procedure involves the hydrothermal growth of MoS₂ ultrathin nanosheets on the surface of SPS microspheres and subsequent annealing to remove SPS core. Incomplete decomposition of SPS during annealing due to the confining effect of MoS₂ shells leaves residual porous carbon in the interior. When being evaluated as the anode materials of Li‐ion batteries, the as‐prepared C@MoS₂ microspheres exhibit excellent cycling stability (95% of capacity retained after 100 cycles) and high rate behavior (560 mAh g^?1 at 5 A g^?1).     

3D Interconnected Carbon Fiber Network‐Enabled Ultralong Life Na3V2(PO4)3@Carbon Paper Cathode for Sodium‐Ion Batteries

Sodium‐ion batteries (NIBs) are an emerging technology, which can meet increasing demands for large‐scale energy storage. One of the most promising cathode material candidates for sodium‐ion batteries is Na₃V₂(PO₄)₃ due to its high capacity, thermal stability, and sodium (Na) Superionic Conductor 3D (NASICON)‐type framework. In this work, the authors have significantly improved electrochemical performance and cycling stability of Na₃V₂(PO₄)₃ by introducing a 3D interconnected conductive network in the form of carbon fiber derived from ordinary paper towel. The free‐standing Na₃V₂(PO₄)₃‐carbon paper (Na₃V₂(PO₄)₃@CP) hybrid electrodes do not require a metallic current collector, polymeric binder, or conducting additives to function as a cathode material in an NIB system. The Na₃V₂(PO₄)₃@CP cathode demonstrates extraordinary long term cycling stability for 30 000 deep charge–discharge cycles at a current density of 2.5 mA cm^?2. Such outstanding cycling stability can meet the stringent requirements for renewable energy storage.     

Hollow MXene Spheres and 3D Macroporous MXene Frameworks for Na‐Ion Storage

2D transition metal carbides and nitrides, named MXenes, are attracting increasing attentions and showing competitive performance in energy storage devices including electrochemical capacitors, lithium‐ and sodium‐ion batteries, and lithium–sulfur batteries. However, similar to other 2D materials, MXene nanosheets are inclined to stack together, limiting the device performance. In order to fully utilize MXenes' electrochemical energy storage capability, here, processing of 2D MXene flakes into hollow spheres and 3D architectures via a template method is reported. The MXene hollow spheres are stable and can be easily dispersed in solvents such as water and ethanol, demonstrating their potential applications in environmental and biomedical fields as well. The 3D macroporous MXene films are free‐standing, flexible, and highly conductive due to good contacts between spheres and metallic conductivity of MXenes. When used as anodes for sodium‐ion storage, these 3D MXene films exhibit much improved performances compared to multilayer MXenes and MXene/carbon nanotube hybrid architectures in terms of capacity, rate capability, and cycling stability. This work demonstrates the importance of MXene electrode architecture on the electrochemical performance and can guide future work on designing high‐performance MXene‐based materials for energy storage, catalysis, environmental, and biomedical applications.     

The Application of Hollow Structured Anodes for Sodium‐Ion Batteries: From Simple to Complex Systems

Hollow structures exhibit fascinating and important properties for energy‐related applications, such as lithium‐ion batteries, supercapacitors, and electrocatalysts. Sodium‐ion batteries, as analogs of lithium‐ion batteries, are considered as promising devices for large‐scale electrical energy storage. Inspired by applications of hollow structures as anodes for lithium‐ion batteries, the application of these structures in sodium‐ion batteries has attracted great attention in recent years. However, due to the difference in lithium and sodium‐ion batteries, there are several issues that need to be addressed toward rational design of hollow structured sodium anodes. Herein, this research news article presents the recent developments in the synthesis of hollow structured anodes for sodium‐ion batteries. The main strategies for rational design of materials for sodium‐ion batteries are presented to provide an overview and perspectives for the future developments of this research area.     

Mesoporous Hollow Sb/ZnS@C Core–Shell Heterostructures as Anodes for High‐Performance Sodium‐Ion Batteries

Combining the advantage of metal, metal sulfide, and carbon, mesoporous hollow core–shell Sb/ZnS@C hybrid heterostructures composed of Sb/ZnS inner core and carbon outer shell are rationally designed based on a robust template of ZnS nanosphere, as anodes for high‐performance sodium‐ion batteries (SIBs). A partial cation exchange reaction based on the solubility difference between Sb₂S₃ and ZnS can transform mesoporous ZnS to Sb₂S₃/ZnS heterostructure. To get a stable structure, a thin contiguous resorcinol‐formaldehyde (RF) layer is introduced on the surface of Sb₂S₃/ZnS heterostructure. The effectively protective carbon layer from RF can be designed as the reducing agent to convert Sb₂S₃ to metallic Sb to obtain core–shell Sb/ZnS@C hybrid heterostructures. Simultaneously, the carbon outer shell is beneficial to the charge transfer kinetics, and can maintain the structure stability during the repeated sodiation/desodiation process. Owing to its unique stable architecture and synergistic effects between the components, the core–shell porous Sb/ZnS@C hybrid heterostructure SIB anode shows a high reversible capacity, good rate capability, and excellent cycling stability by turning the optimized voltage range. This novel strategy to prepare carbon‐layer‐protected metal/metal sulfide core–shell heterostructure can be further extended to design other novel nanostructured systems for high‐performance energy storage devices.     

SnS2/Co3S4 Hollow Nanocubes Anchored on S‐Doped Graphene for Ultrafast and Stable Na‐Ion Storage

SnS₂ has been widely studied as an anode material for sodium‐ion batteries (SIBs) based on the high theoretical capacity and layered structure. Unfortunately, rapid capacity decay associated with volume variation during cycling limits practical application. Herein, SnS₂/Co₃S₄ hollow nanocubes anchored on S‐doped graphene are synthesized for the first time via coprecipitation and hydrothermal methods. When applied as the anode for SIBs, the sample delivers a distinguished charge specific capacity of 1141.8 mAh g^?1 and there is no significant capacity decay (0.1 A g^?1 for 50 cycles). When the rate is increased to 0.5 A g^?1, it presents 845.7 mAh g^?1 after cycling 100 times. Furthermore, the composite also exhibits an ultrafast sodium storage capability where 392.9 mAh g^?1 can be obtained at 10 A g^?1 and the charging time is less than 3 min. The outstanding electrochemical properties can be ascribed to the enhancement of conductivity for the addition of S‐doped graphene and the existence of p–n junctions in the SnS₂/Co₃S₄ heterostructure. Moreover, the presence of mesopores between nanosheets can alleviate volume expansion during cycling as well as being beneficial for the migration of Na⁺.     

Sulfur‐Grafted Hollow Carbon Spheres for Potassium‐Ion Battery Anodes

Sulfur‐rich carbons are minimally explored for potassium‐ion batteries (KIBs). Here, a large amount of S (38 wt%) is chemically incorporated into a carbon host, creating sulfur‐grafted hollow carbon spheres (SHCS) for KIB anodes. The SHCS architecture provides a combination of nanoscale (≈40 nm) diffusion distances and C? S chemical bonding to minimize cycling capacity decay and Coulombic efficiency (CE) loss. The SHCS exhibit a reversible capacity of 581 mAh g^?1 (at 0.025 A g^?1), which is the highest reversible capacity reported for any carbon‐based KIB anode. Electrochemical analysis of S‐free carbon spheres baseline demonstrates that both the carbon matrix and the sulfur species are highly electrochemically active. SHCS also show excellent rate capability, achieving 202, 160, and 110 mAh g^?1 at 1.5, 3, and 5 A g^?1, respectively. The electrode maintains 93% of the capacity from the 5th to 1000th cycle at 3 A g^?1, with steady‐state CE being near 100%. Raman analysis indicates reversible breakage of C? S and S? S bonds upon potassiation to 0.01 V versus K/K⁺. The galvanostatic intermittent titration technique (GITT) analysis provides voltage‐dependent K⁺ diffusion coefficients that range from 10^?10 to 10^?12 cm² s^?1 upon potassiation and depotassiation, with approximately five times higher coefficient for the former.     

Novel 2D Layered Molybdenum Ditelluride Encapsulated in Few‐Layer Graphene as High‐Performance Anode for Lithium‐Ion Batteries

Molybdenum ditelluride nanosheets encapsulated in few‐layer graphene (MoTe₂/FLG) are synthesized by a simple heating method using Te and Mo powder and subsequent ball milling with graphite. The as‐prepared MoTe₂/FLG nanocomposites as anode materials for lithium‐ion batteries exhibit excellent electrochemical performance with a highly reversible capacity of 596.5 mAh g^?1 at 100 mA g^?1, a high rate capability (334.5 mAh g^?1 at 2 A g^?1), and superior cycling stability (capacity retention of 99.5% over 400 cycles at 0.5 A g^?1). Ex situ X‐ray diffraction and transmission electron microscopy are used to explore the lithium storage mechanism of MoTe₂. Moreover, the electrochemical performance of a MoTe₂/FLG//0.35Li₂MnO₃·0.65LiMn_0.5Ni_0.5O₂ full cell is investigated, which displays a reversible capacity of 499 mAh g^?1 (based on the MoTe₂/FLG mass) at 100 mA g^?1 and a capacity retention of 78% over 50 cycles, suggesting the promising application of MoTe₂/FLG for lithium‐ion storage. First‐principles calculations exhibit that the lowest diffusion barrier (0.18 eV) for lithium ions along pathway III in the MoTe₂ layered structure is beneficial for improving the Li intercalation/deintercalation property.     

Revealing the Simultaneous Effects of Conductivity and Amorphous Nature of Atomic‐Layer‐Deposited Double‐Anion‐Based Zinc Oxysulfide as Superior Anodes in Na‐Ion Batteries

Although sodium‐ion batteries (SIBs) are considered promising alternatives to their Li counterparts, they still suffer from challenges like slow kinetics of the sodiation process, large volume change, and inferior cycling stability. On the other hand, the presence of additional reversible conversion reactions makes the metal compounds the preferred anode materials over carbon. However, conductivity and crystallinity of such materials often play the pivotal role in this regard. To address these issues, atomic layer deposited double‐anion‐based ternary zinc oxysulfide (ZnOS) thin films as an anode material in SIBs are reported. Electrochemical studies are carried out with different O/(O+S) ratios, including O‐rich and S‐rich crystalline ZnOS along with the amorphous phase. Amorphous ZnOS with the O/(O+S) ratio of ≈0.4 delivers the most stable and considerably high specific (and volumetric) capacities of 271.9 (≈1315.6 mAh cm^?3) and 173.1 mAh g^?1 (≈837.7 mAh cm^?3) at the current densities of 500 and 1000 mA g^?1, respectively. A dominant capacitive‐controlled contribution of the amorphous ZnOS anode indicates faster electrochemical reaction kinetics. An electrochemical reaction mechanism is also proposed via X‐ray photoelectron spectroscopy analyses. A comparison of the cycling stability further establishes the advantage of this double‐anion‐based material over pristine ZnO and ZnS anodes.     

An Advanced MoS2/Carbon Anode for High‐Performance Sodium‐Ion Batteries

Molybdenum disulfide (MoS₂) is a promising anode for high performance sodium‐ion batteries due to high specific capacity, abundance, and low cost. However, poor cycling stability, low rate capability and unclear electrochemical reaction mechanism are the main challenges for MoS₂ anode in Na‐ion batteries. In this study, molybdenum disulfide/carbon (MoS₂/C) nanospheres are fabricated and used for Na‐ion battery anodes. MoS₂/C nanospheres deliver a reversible capacity of 520 mAh g^?1 at 0.1 C and maintain at 400 mAh g^?1 for 300 cycles at a high current density of 1 C, demonstrating the best cycling performance of MoS₂ for Na‐ion batteries to date. The high capacity is attributed to the short ion and electron diffusion pathway, which enables fast charge transfer and low concentration polarization. The stable cycling performance and high coulombic efficiency (～100%) of MoS₂/C nanospheres are ascribed to (1) highly reversible conversion reaction of MoS₂ during sodiation/desodiation as evidenced by ex‐situ X‐ray diffraction (XRD) and (2) the formation of a stable solid electrolyte interface (SEI) layer in fluoroethylene carbonate (FEC) based electrolyte as demonstrated by fourier transform infrared spectroscopy (FTIR) measurements.     

A Salt‐Templated Strategy toward Hollow Iron Selenides‐Graphitic Carbon Composite Microspheres with Interconnected Multicavities as High‐Performance Anode Materials for Sodium‐Ion Batteries

In this work, a facile salt‐templated approach is developed for the preparation of hollow FeSe₂/graphitic carbon composite microspheres as sodium‐ion battery anodes; these are composed of interconnected multicavities and an enclosed surface in‐plane embedded with uniform hollow FeSe₂ nanoparticles. As the precursor, Fe₂O₃/carbon microspheres containing NaCl nanocrystals are obtained using one‐pot ultrasonic spray pyrolysis in which inexpensive NaCl and dextrin are used as a porogen and carbon source, respectively, enabling mass production of the composites. During post‐treatment, Fe₂O₃ nanoparticles in the composites transform into hollow FeSe₂ nanospheres via the Kirkendall effect. These rational structures provide numerous conductive channels to facilitate ion/electron transport and enhance the capacitive contribution. Moreover, the synergistic effect between the hollow cavities within FeSe₂ and the outstanding mechanical strength of the porous carbon matrix can effectively accommodate the large volume changes during cycling. Correspondingly, the composite microsphere exhibits high discharge capacity of 510 mA h g^?1 after 200 cycles at 0.2 A g^?1 with capacity retention of 88% when calculated from the second cycle. Even at a high current density of 5.0 A g^?1, a high discharge capacity of 417 mA h g^?1 can be achieved.     

Tuning the Solid Electrolyte Interphase for Selective Li‐ and Na‐Ion Storage in Hard Carbon

Solid‐electrolyte interphase (SEI) films with controllable properties are highly desirable for improving battery performance. In this paper, a combined experimental and theoretical approach is used to study SEI films formed on hard carbon in Li‐ and Na‐ion batteries. It is shown that a stable SEI layer can be designed by precycling an electrode in a desired Li‐ or Na‐based electrolyte, and that ionic transport can be kinetically controlled. Selective Li‐ and Na‐based SEI membranes are produced using Li‐ or Na‐based electrolytes, respectively. The Na‐based SEI allows easy transport of Li ions, while the Li‐based SEI shuts off Na‐ion transport. Na‐ion storage can be manipulated by tuning the SEI layer with film‐forming electrolyte additives, or by preforming an SEI layer on the electrode surface. The Na specific capacity can be controlled to < 25 mAh g^?1; ≈ 1/10 of the normal capacity (250 mAh g^?1). Unusual selective/preferential transport of Li ions is demonstrated by preforming an SEI layer on the electrode surface and corroborated with a mixed electrolyte. This work may provide new guidance for preparing good ion‐selective conductors using electrochemical approaches.