Borocarbonitrides as Metal‐Free Catalysts for the Hydrogen Evolution Reaction

Hydrogen generation by water splitting is clearly a predominant and essential strategy to tackle the problems related to renewable energy. In this context, the discovery of proper catalysts for electrochemical and photochemical water splitting assumes great importance. There is also a serious intent to eliminate platinum and other noble metal catalysts. To replace Pt by a non‐metallic catalyst with desirable characteristics is a challenge. Borocarbonitrides, (B_xC_yN_z) which constitutes a new class of 2D material, offer great promise as non‐metallic catalysts because of the easy tunability of bandgap, surface area, and other electronic properties with variation in composition. Recently, B_xC_yN_z composites with excellent electrochemical and photochemical hydrogen generation activities have been found, especially noteworthy being the observation that B_xC_yN_z with a carbon‐rich composition or its nanocomposites with MoS₂ come close to Pt in electrocatalytic properties, showing equally good photochemical activity.     

Molybdenum Carbide‐Decorated Metallic Cobalt@Nitrogen‐Doped Carbon Polyhedrons for Enhanced Electrocatalytic Hydrogen Evolution

Electrocatalytic hydrogen evolution reaction (HER) based on water splitting holds great promise for clean energy technologies, in which the key issue is exploring cost‐effective materials to replace noble metal catalysts. Here, a sequential chemical etching and pyrolysis strategy are developed to prepare molybdenum carbide‐decorated metallic cobalt@nitrogen‐doped porous carbon polyhedrons (denoted as Mo/Co@N–C) hybrids for enhanced electrocatalytic hydrogen evolution. The obtained metallic Co nanoparticles are coated by N‐doped carbon thin layers while the formed molybdenum carbide nanoparticles are well‐dispersed in the whole Co@N–C frames. Benefiting from the additionally implanted molybdenum carbide active sites, the HER performance of Mo/Co@N–C hybrids is significantly promoted compared with the single Co@N–C that is derived from the pristine ZIF‐67 both in alkaline and acidic media. As a result, the as‐synthesized Mo/Co@N–C hybrids exhibit superior HER electrocatalytic activity, and only very low overpotentials of 157 and 187 mV are needed at 10 mA cm^?2 in 1 m KOH and 0.5 m H₂SO₄, respectively, opening a door for rational design and fabrication of novel low‐cost electrocatalysts with hierarchical structures toward electrochemical energy storage and conversion.     

ZIF‐8/ZIF‐67‐Derived Co‐Nx‐Embedded 1D Porous Carbon Nanofibers with Graphitic Carbon‐Encased Co Nanoparticles as an Efficient Bifunctional Electrocatalyst

Herein, an approach is reported for fabrication of Co‐N_x‐embedded 1D porous carbon nanofibers (CNFs) with graphitic carbon‐encased Co nanoparticles originated from metal–organic frameworks (MOFs), which is further explored as a bifunctional electrocatalyst for both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Electrochemical results reveal that the electrocatalyst prepared by pyrolysis at 1000 °C (CoNC‐CNF‐1000) exhibits excellent catalytic activity toward ORR that favors the four‐electron ORR process and outstanding long‐term stability with 86% current retention after 40 000 s. Meanwhile, it also shows superior electrocatalytic activity toward OER, reaching a lower potential of 1.68 V at 10 mA cm^?2 and a potential gap of 0.88 V between the OER potential (at 10 mA cm^?2) and the ORR half‐wave potential. The ORR and OER performance of CoNC‐CNF‐1000 have outperformed commercial Pt/C and most nonprecious‐metal catalysts reported to date. The remarkable ORR and OER catalytic performance can be mainly attributable to the unique 1D structure, such as higher graphitization degree beneficial for electronic mobility, hierarchical porosity facilitating the mass transport, and highly dispersed CoN_xC active sites functionalized carbon framework. This strategy will shed light on the development of other MOF‐based carbon nanofibers for energy storage and electrochemical devices.     

Sustainable Synthesis of Co@NC Core Shell Nanostructures from Metal Organic Frameworks via Mechanochemical Coordination Self‐Assembly: An Efficient Electrocatalyst for Oxygen Reduction Reaction

Herein, a new type of cobalt encapsulated nitrogen‐doped carbon (Co@NC) nanostructure employing Zn_xCo_1?x(C₃H₄N₂) metal–organic framework (MOF) as precursor is developed, by a simple, ecofriendly, solvent‐free approach that utilizes a mechanochemical coordination self‐assembly strategy. Possible evolution of Zn_xCo_1?x(C₃H₄N₂) MOF structures and their conversion to Co@NC nanostructures is established from an X‐ray diffraction technique and transmission electron microscopy analysis, which reveal that MOF‐derived Co@NC core–shell nanostructures are well ordered and highly crystalline in nature. Co@NC–MOF core–shell nanostructures show excellent catalytic activity for the oxygen reduction reaction (ORR), with onset potential of 0.97 V and half‐wave potential of 0.88 V versus relative hydrogen electrode in alkaline electrolyte, and excellent durability with zero degradation after 5000 potential cycles; whereas under similar experimental conditions, the commonly utilized Pt/C electrocatalyst degrades. The Co@NC–MOF electrocatalyst also shows excellent tolerance to methanol, unlike the Pt/C electrocatalyst. X‐ray photoelectron spectroscopy (XPS) analysis shows the presence of ORR active pyridinic‐N and graphitic‐N species, along with CoN_x? C_y and Co? N_x ORR active (M–N–C) sites. Enhanced electron transfer kinetics from nitrogen‐doped carbon shell to core Co nanoparticles, the existence of M–N–C active sites, and protective NC shells are responsible for high ORR activity and durability of the Co@NC–MOF electrocatalyst.     

Toward Activity Origin of Electrocatalytic Hydrogen Evolution Reaction on Carbon‐Rich Crystalline Coordination Polymers

The fundamental understanding of electrocatalytic active sites for hydrogen evolution reaction (HER) is significantly important for the development of metal complex involved carbon electrocatalysts with low kinetic barrier. Here, the MS_x N_y (M = Fe, Co, and Ni, x /y are 2/2, 0/4, and 4/0, respectively) active centers are immobilized into ladder‐type, highly crystalline coordination polymers as model carbon‐rich electrocatalysts for H₂ generation in acid solution. The electrocatalytic HER tests reveal that the coordination of metal, sulfur, and nitrogen synergistically facilitates the hydrogen ad‐/desorption on MS_x N_y catalysts, leading to enhanced HER kinetics. Toward the activity origin of MS₂N₂, the experimental and theoretical results disclose that the metal atoms are preferentially protonated and then the production of H₂ is favored on the M? N active sites after a heterocoupling step involving a N‐bound proton and a metal‐bound hydride. Moreover, the tuning of the metal centers in MS₂N₂ leads to the HER performance in the order of FeS₂N₂ > CoS₂N₂ > NiS₂N₂. Thus, the understanding of the catalytic active sites provides strategies for the enhancement of the electrocatalytic activity by tailoring the ligands and metal centers to the desired function.     

Atomic Layer Deposition‐Assisted Fabrication of Co‐Nanoparticle/N‐Doped Carbon Nanotube Hybrids as Efficient Electrocatalysts for the Oxygen Evolution Reaction

Transition metal (TM)‐based carbon hybrids have numerous applications in the field of regenerative electrochemical energy. The synergetic effects of high conductivity of carbon supports and abundant catalytic active sites in TMs make these hybrids promising oxygen evolution reaction (OER) electrocatalysts. However, strategies for modulating the catalytic active species in the above hybrids are limited despite being highly sought after. Furthermore, the exact roles of chemical species in the hybrids (e.g., N, C, or TM) mainly responsible for this high OER performance remain unknown. Herein, an innovative approach based on atomic layer deposition is developed to tune the true active species in Co nanoparticle/N‐doped carbon nanotube (Co/N‐CNT) hybrids. Specifically, the configuration predominantly promoting water oxidation in an alkaline medium is identified as pyridinic N–Co–C. Furthermore, a physicochemical intact interface between metallic Co nanoparticles and conductive N‐CNTs is demonstrated to induce synergetic effects for accelerating charge transfer and enhancing electrocatalytic activity as well as stability in the hybrid catalysts. The optimized hybrid catalyst is revealed to exhibit outstanding alkaline OER activity and stability, outperforming RuO₂, a benchmark novel OER electrocatalyst.     

Strong Electronic Interaction in Dual‐Cation‐Incorporated NiSe2 Nanosheets with Lattice Distortion for Highly Efficient Overall Water Splitting

Exploring highly efficient and low‐cost electrocatalysts for electrochemical water splitting is of importance for the conversion of intermediate energy. Herein, the synthesis of dual‐cation (Fe, Co)‐incorporated NiSe₂ nanosheets (Fe, Co‐NiSe₂) and systematical investigation of their electrocatalytic performance for water splitting as a function of the composition are reported. The dual‐cation incorporation can distort the lattice and induce stronger electronic interaction, leading to increased active site exposure and optimized adsorption energy of reaction intermediates compared to single‐cation‐doped or pure NiSe₂. As a result, the obtained Fe_0.09Co_0.13‐NiSe₂ porous nanosheet electrode shows an optimized catalytic activity with a low overpotential of 251 mV for oxygen evolution reaction and 92 mV for hydrogen evolution reaction (both at 10 mA cm^?2 in 1 m KOH). When used as bifunctional electrodes for overall water splitting, the current density of 10 mA cm^?2 is achieved at a low cell voltage of 1.52 V. This work highlights the importance of dual‐cation doping in enhancing the electrocatalyst performance of transition metal dichalcogenides.     

Cobalt Nanoparticles and Atomic Sites in Nitrogen‐Doped Carbon Frameworks for Highly Sensitive Sensing of Hydrogen Peroxide

In situ monitoring of hydrogen peroxide (H₂O₂) during its production process is needed. Here, an electrochemical H₂O₂ sensor with a wide linear current response range (concentration: 5 × 10^?8 to 5 × 10^?2 m ), a low detection limit (32.4 × 10^?9 m ), and a high sensitivity (568.47 µA mm ^?1 cm^?2) is developed. The electrocatalyst of the sensor consists of cobalt nanoparticles and atomic Co‐N_x moieties anchored on nitrogen doped carbon nanotube arrays (Co‐N/CNT), which is obtained through the pyrolysis of the sandwich‐like urea@ZIF‐67 complex. More cobalt nanoparticles and atomic Co‐N_x as active sites are exposed during pyrolysis, contributing to higher electrocatalytic activity. Moreover, a portable screen‐printed electrode sensor is constructed and demonstrated for rapidly detecting (cost ≈40 s) H₂O₂ produced in microbial fuel cells with only 50 µL solution. Both the synthesis strategy and sensor design can be applied to other energy and environmental fields.     

Nitrogen‐Doped Graphene‐Encapsulated Nickel–Copper Alloy Nanoflower for Highly Efficient Electrochemical Hydrogen Evolution Reaction

Development of high‐performance and low‐cost nonprecious metal electrocatalysts is critical for eco‐friendly hydrogen production through electrolysis. Herein, a novel nanoflower‐like electrocatalyst comprising few‐layer nitrogen‐doped graphene‐encapsulated nickel–copper alloy directly on a porous nitrogen‐doped graphic carbon framework (denoted as Ni_x Cu_y @ NG‐NC) is successfully synthesized using a facile and scalable method through calcinating the carbon, copper, and nickel hydroxy carbonate composite under inert atmosphere. The introduction of Cu can effectively modulate the morphologies and hydrogen evolution reaction (HER) performance. Moreover, the calcination temperature is an important factor to tune the thickness of graphene layers of the Ni_x Cu_y @ NG‐NC composites and the associated electrocatalytic performance. Due to the collective effects including unique porous flowered architecture and the synergetic effect between the bimetallic alloy core and graphene shell, the Ni₃Cu₁@ NG‐NC electrocatalyst obtained under optimized conditions exhibits highly efficient and ultrastable activity toward HER in harsh environments, i.e., a low overpotential of 122 mV to achieve a current density of 10 mA cm^?2 with a low Tafel slope of 84.2 mV dec^?1 in alkaline media, and a low overpotential of 95 mV to achieve a current density of 10 mA cm^?2 with a low Tafel slope of 77.1 mV dec^?1 in acidic electrolyte.     

Polyaniline Derived N‐Doped Carbon‐Coated Cobalt Phosphide Nanoparticles Deposited on N‐Doped Graphene as an Efficient Electrocatalyst for Hydrogen Evolution Reaction

The development of highly efficient and durable non‐noble metal electrocatalysts for the hydrogen evolution reaction (HER) is significant for clean and renewable energy research. This work reports the synthesis of N‐doped graphene nanosheets supported N‐doped carbon coated cobalt phosphide (CoP) nanoparticles via a pyrolysis and a subsequent phosphating process by using polyaniline. The obtained electrocatalyst exhibits excellent electrochemical activity for HER with a small overpotential of ?135 mV at 10 mA cm^?2 and a low Tafel slope of 59.3 mV dec^?1 in 0.5 m H₂SO₄. Additionally, the encapsulation of N‐doped carbon shell prevents CoP nanoparticles from corrosion, exhibiting good stability after 14 h operation. Moreover, the as‐prepared electrocatalyst also shows outstanding activity and stability in basic and neutral electrolytes.     

Pseudocapacitive Ni‐Co‐Fe Hydroxides/N‐Doped Carbon Nanoplates‐Based Electrocatalyst for Efficient Oxygen Evolution

The oxygen evolution reaction (OER) catalytic activity of a transition metal oxides/hydroxides based electrocatalyst is related to its pseudocapacitance at potentials lower than the OER standard potential. Thus, a well‐defined pseudocapacitance could be a great supplement to boost OER. Herein, a highly pseudocapacitive Ni‐Fe‐Co hydroxides/N‐doped carbon nanoplates (NiCoFe‐NC)‐based electrocatalyst is synthesized using a facile one‐pot solvothermal approach. The NiCoFe‐NC has a great pseudocapacitive performance with 1849 F g^?1 specific capacitance and 31.5 Wh kg^?1 energy density. This material also exhibits an excellent OER catalytic activity comparable to the benchmark RuO₂ catalysts (an initiating overpotential of 160 mV and delivering 10 mA cm^?2 current density at 250 mV, with a Tafel slope of 31 mV dec^?1). The catalytic performance of the optimized NiCoFe‐NC catalyst could keep 24 h. X‐ray photoelectron spectroscopy, electrochemically active surface area, and other physicochemical and electrochemical analyses reveal that its great OER catalytic activity is ascribed to the Ni‐Co hydroxides with modular 2‐Dimensional layered structure, the synergistic interactions among the Fe(III) species and Ni, Co metal centers, and the improved hydrophily endowed by the incorporation of N‐doped carbon hydrogel. This work might provide a useful and general strategy to design and synthesize high‐performance metal (hydr)oxides OER electrocatalysts.     

Ultrathin Cobalt Oxide Layers as Electrocatalysts for High‐Performance Flexible Zn–Air Batteries

Synergistic improvements in the electrical conductivity and catalytic activity for the oxygen reduction reaction (ORR)/oxygen evolution reaction (OER) are of paramount importance for rechargeable metal–air batteries. In this study, one‐nanometer‐scale ultrathin cobalt oxide (CoO_x) layers are fabricated on a conducting substrate (i.e., a metallic Co/N‐doped graphene substrate) to achieve superior bifunctional activity in both the ORR and OER and ultrahigh output power for flexible Zn–air batteries. Specifically, at the atomic scale, the ultrathin CoO_x layers effectively accelerate electron conduction and provide abundant active sites. X‐ray absorption spectroscopy reveals that the metallic Co/N‐doped graphene substrate contributes to electron transfer toward the ultrathin CoO_x layer, which is beneficial for the electrocatalytic process. The as‐obtained electrocatalyst exhibits ultrahigh electrochemical activity with a positive half‐wave potential of 0.896 V for ORR and a low overpotential of 370 mV at 10 mA cm^?2 for OER. The flexible Zn–air battery built with this catalyst exhibits an ultrahigh specific power of 300 W g_cat ^?1, which is essential for portable devices. This work provides a new design pathway for electrocatalysts for high‐performance rechargeable metal–air battery systems.     

Iridium‐Based Multimetallic Porous Hollow Nanocrystals for Efficient Overall‐Water‐Splitting Catalysis

The development of active and durable bifunctional electrocatalysts for overall water splitting is mandatory for renewable energy conversion. This study reports a general method for controllable synthesis of a class of IrM (M = Co, Ni, CoNi) multimetallic porous hollow nanocrystals (PHNCs), through etching Ir‐based, multimetallic, solid nanocrystals using Fe³⁺ ions, as catalysts for boosting overall water splitting. The Ir‐based multimetallic PHNCs show transition‐metal‐dependent bifunctional electrocatalytic activities for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in acidic electrolyte, with IrCo and IrCoNi PHNCs being the best for HER and OER, respectively. First‐principles calculations reveal a ligand effect, induced by alloying Ir with 3d transition metals, can weaken the adsorption energy of oxygen intermediates, which is the key to realizing much‐enhanced OER activity. The IrCoNi PHNCs are highly efficient in overall‐water‐splitting catalysis by showing a low cell voltage of only 1.56 V at a current density of 2 mA cm^?2, and only 8 mV of polarization‐curve shift after a 1000‐cycle durability test in 0.5 m H₂SO₄ solution. This work highlights a potentially powerful strategy toward the general synthesis of novel, multimetallic, PHNCs as highly active and durable bifunctional electrocatalysts for high‐performance electrochemical overall‐water‐splitting devices.     

Graphene Decorated with Uniform Ultrathin (CoP)x–(FeP)1–x Nanorods: A Robust Non‐Noble‐Metal Catalyst for Hydrogen Evolution

Developing high‐performance but low‐cost hydrogen evolution reaction (HER) electrocatalysts with superior activity and stability for future sustainable energy conversion technologies is highly desired. Tuning of microstructure, configuration, and chemical composition are paramount to developing effective non‐noble electrocatalysts for HER. Herein, a universal “nanocasting” method is reported to construct graphene decorated with uniform ternary (CoP)_x –(FeP)_1?x (0 ≤ x ≤ 1) nanorods hybrids with different chemical compositions [(CoP)_x –(FeP)_1?x –NRs/G] as a highly active and durable nonprecious‐metal electrocatalyst for the HER. The optimized (CoP)_0.54–(FeP)_0.46–NRs/G electrocatalyst exhibits overpotentials of as low as 57 and 97 mV at 10 mA cm^?2, Tafel slopes of 52 and 62 mV dec^?1, exchange current densities of 0.489 and 0.454 mA cm^?2, and Faradaic efficiency of nearly 100% in acidic and alkaline media, respectively. More importantly, this electrocatalyst also exhibits high tolerance and durability in a wide pH range and keeps catalytic activity for at least 3000 cycles and 24 h of sustained hydrogen production. The excellent catalytic performance of the (CoP)_x –(FeP)_1?x –NRs/G electrocatalyst may be ascribed to its unique mesoporous structure and strong synergistic effect between CoP and FeP. Thus, the work provides a feasible way to fabricate cheap and highly efficient electrocatalyst as alternatives for Pt‐based electrocatalysts for HER in electrochemical water splitting.     

Promoting Oxygen Evolution Reaction of Co‐Based Catalysts (Co3O4, CoS,CoP, and CoN) through Photothermal Effect

The increase of reaction temperature of electrocatalysts is regarded as an efficient method to improve the oxygen evolution reaction (OER) activity. Herein, it is reported that the electrocatalytic performance of dual functional (i.e., electrocatalytic and photothermal functions) Co₃O₄ can be dramatically improved via its photothermal effect. The operating temperature of the Co₃O₄ electrode is elevated in situ under near infrared (NIR) light irradiation, resulting in enhanced oxygen evolution activity due to its accelerated electrical conductivity, reaction kinetics, and desorption rate of O₂ bubbles from the electrode. In addition, photothermal effect can also enhance the electrocatalytic reaction rates of metal‐doped Co₃O₄ electrodes, indicating that it is able to significantly improve the OER activities of electrodes together with other modification strategies. With the assistance of the photothermal effect, the obtained Ni‐doped Co₃O₄ catalyst requires an extremely low overpotential of 208 mV to achieve a benchmark of 10 mA cm^?2 with a small Tafel slope, superior to most reported Co‐based catalysts. Significantly, the electrocatalytic performance of other electrodes with photothermal effect, such as CoN, CoP, and CoS, are also boosted under NIR light irradiation, indicating opportunities for implementing photothermal enhancement in electrocatalytic water splitting.     

Synergistic Modulation of Electronic Interaction to Enhance Intrinsic Activity and Conductivity of Fe–Co–Ni Hydroxide Nanotube for Highly Efficient Oxygen Evolution Electrocatalyst

The large-scale hydrogen production and application through electrocatalytic water splitting depends crucially on the development of highly efficient, cost-effective electrocatalysts for oxygen evolution reaction (OER), which, however, remains challenging. Here, a new electrocatalyst of trimetallic Fe–Co–Ni hydroxide (denoted as FeCoNiO_xH_y) with a nanotubular structure is developed through an enhanced Kirkendall process under applied potential. The FeCoNiO_xH_y features synergistic electronic interaction between Fe, Co, and Ni, which not only notably increases the intrinsic OER activity of FeCoNiO_xH_y by facilitating the formation of *OOH intermediate, but also substantially improves the intrinsic conductivity of FeCoNiO_xH_y to facilitate charge transfer and activate catalytic sites through electrocatalyst by promoting the formation of abundant Co³⁺. Therefore, FeCoNiO_xH_y delivers remarkably accelerated OER kinetics and superior apparent activity, indicated by an ultra-low overpotential potential of 257 mV at a high current density of 200 mA cm⁻². This work is of fundamental and practical significance for synergistic catalysis related to advanced energy conversion materials and technologies.     

Incorporating Nitrogen‐Doped Graphene Quantum Dots and Ni3S2 Nanosheets: A Synergistic Electrocatalyst with Highly Enhanced Activity for Overall Water Splitting

A noble‐metal‐free electrocatalyst is fabricated via in situ formation of nanocomposite of nitrogen‐doped graphene quantum dots (NGQDs) and Ni₃S₂ nanosheets on the Ni foam (Ni₃S₂‐NGQDs/NF). The resultant Ni₃S₂‐NGQDs/NF can serve as an active, binder‐free, and self‐supported catalytic electrode for direct water splitting, which delivers a current density of 10 mA cm^?2 at an overpotential of 216 mV for oxygen evolution reaction and 218 mV for hydrogen evolution reaction in alkaline media. This bifunctional electrocatalyst enables the construction of an alkali electrolyzer with a low cell voltage of 1.58 V versus reversible hydrogen electrode (RHE) at 10 mA cm^?2. The experimental results and theoretical calculations demonstrate that the synergistic effects of the constructed active interfaces are the key factor for excellent performance. The nanocomposite of NGQDs and Ni₃S₂ nanosheets can be promising water splitting electrocatalyst for large‐scale hydrogen generation or other energy storage and conversion applications.     

A Bifunctional Highly Efficient FeNx/C Electrocatalyst

Herein, a type of Fe, N‐codoped carbon electrocatalyst (FeN_x/C, Fe‐N‐BCNT#BP) containing bamboo carbon nanotubes and displaying bifunctional high catalytic efficiency for both oxygen reduction reaction (ORR) and carbon dioxide reduction reaction (CO2RR) is reported. It shows high electrocatalytic activity and stability for both the ORR process with onset potential of 1.03 V_RHE in alkaline and the CO2RR to CO with high faradic efficiency up to 90% and selectivity of about 100% at low overpotential of 0.49 V. For CO2RR to CO, it is revealed that Fe₃C is active but the activity of FeN_x centers is lower than that of C–N‐based centers, contrary with that observed for ORR. Due to its low cost and high electrocatalytic performance for these two reduction reactions, the obtained catalyst is very promising for extensive application in future. The revealed huge activity difference of the same types of active sites for different reactions can efficiently guide the synthesis of advanced materials with multifunction.     

Nickel@Nitrogen‐Doped Carbon@MoS2 Nanosheets: An Efficient Electrocatalyst for Hydrogen Evolution Reaction

Developing cheap, abundant, and easily available electrocatalysts to drive the hydrogen evolution reaction (HER) at small overpotentials is an urgent demand of hydrogen production from water splitting. Molybdenum disulfide (MoS₂) based composites have emerged as competitive electrocatalysts for HER in recent years. Herein, nickel@nitrogen‐doped carbon@MoS₂ nanosheets (Ni@NC@MoS₂) hybrid sub‐microspheres are presented as HER catalyst. MoS₂ nanosheets with expanded interlayer spacings are vertically grown on nickel@nitrogen‐doped carbon (Ni@NC) substrate to form Ni@NC@MoS₂ hierarchical sub‐microspheres by a simple hydrothermal process. The formed Ni@NC@MoS₂ composites display excellent electrocatalytic activity for HER with an onset overpotential of 18 mV, a low overpotential of 82 mV at 10 mA cm^?2, a small Tafel slope of 47.5 mV dec^?1, and high durability in 0.5 H₂SO₄ solution. The outstanding HER performance of the Ni@NC@MoS₂ catalyst can be ascribed to the synergistic effect of dense catalytic sites on MoS₂ nanosheets with exposed edges and expanded interlayer spacings, and the rapid electron transfer from Ni@NC substrate to MoS₂ nanosheets. The excellent Ni@NC@MoS₂ electrocatalyst promises potential application in practical hydrogen production, and the strategy reported here can also be extended to grow MoS₂ on other nitrogen‐doped carbon encapsulated metal species for various applications.     

Ferrocene‐Incorporated Cobalt Sulfide Nanoarchitecture for Superior Oxygen Evolution Reaction

Here, ferrocene(Fc)‐incorporated cobalt sulfide (Co_xS_y) nanostructures directly grown on carbon nanotube (CNT) or carbon fiber (CF) networks for electrochemical oxygen evolution reaction (OER) using a facile one‐step solvothermal method are reported. The strong synergistic interaction between Fc‐Co_xS_y nanostructures and electrically conductive CNTs results in the superior electrocatalytic activity with a very small overpotential of ≈304 mV at 10 mA cm^?2 and a low Tafel slope of 54.2 mV dec^?1 in 1 m KOH electrolyte. Furthermore, the Fc‐incorporated Co_xS_y (FCoS) nanostructures are directly grown on the acid pretreated carbon fiber (ACF), and the resulting fabricated electrode delivers excellent OER performance with a low overpotential of ≈315 mV at 10 mA cm^?2. Such superior OER catalytic activity can be attributed to 3D Fc‐Co_xS_y nanoarchitectures that consist of a high concentration of vertical nanosheets with uniform distribution of nanoparticles that afford a large number of active surface areas and edge sites. Besides, the tight contact interface between ACF substrate and Fc‐Co_xS_y nanostructures could effectively facilitate the electron transfer rate in the OER. This study provides valuable insights for the rational design of energy storage and conversion materials by the incorporation of other transition metal into metal sulfide/oxide nanostructures utilizing metallocene.