圆形开槽贴片微带双模带通滤波器

提出了一种新颖、简单的圆形贴片上刻蚀小方槽的微带双模带通滤波器结构.该滤波器仿真的通带中心频率为5.9 GHz,最大回波损耗优于-31.5 dB,通带内最小插入损耗为- 0.7 dB,3 dB带宽为23.73％.实测和仿真结果相一致.     

基于T 型谐振器的新型可重构滤波器的设计

基于T 型谐振器结构,设计了一款新型小型化可重构滤波器。它可以通过开/ 关射频开关,实现三种滤波器的重新配置。这三种模式分别为带阻滤波器(BSF)、宽阻带带阻滤波器(WB鄄BSF)和双模带通滤波器(DB-BPF)。设计并制造了一款小型可重构滤波器实物(εr =2.65,h =1 mm)。其中,带阻滤波器的阻带中心频率为3.89 GHz,-3 dB相对带宽为90.9% (2.12 - 5.65 GHz);宽带带阻滤波器的阻带中心频率为3.54 GHz,-3 dB 相对带宽为137.85%(1.1～5.98 GHz);双模带通滤波器的两个通带中心频率分别为1.53 GHz 和6.89 GHz,-3 dB 相对带宽分别为17. 6%(1.4～1.67 GHz)和1.16% (6.85～6.93 GHz),两通带之间回波损耗优于15 dB。实物测试结果与仿真结果基本一致。     

一种过孔和枝节加载的带通滤波器设计

为实现射频电路小型化,提出采用具有通带特性的过孔为主体结构、加载开路枝节以及短路枝节谐振器的设计方法,实现一种新型带通滤波器。在仿真优化的基础上进行实物加工测试,实物体积为40mm×20mm×0.9mm,实测结果表明,该滤波器的工作频带为1.36～2.83 GHz,相对带宽70.2%,通带内插入损耗小于1.5 dB,带内回波损耗小于-15dB,带外最大抑制小于-40dB,实测结果和仿真结果吻合良好。     

一种连续通带宽带双工器的研制

设计并制作了工作在2.2～2.8GHz的带状线结构3dB定向耦合器和2只通带分别为2.2～2.5GHz及2.5～2.8GHz的8阶微带发夹线结构带通滤波器,利用该耦合器和带通滤波器设计制作连续通带宽带双工器,并通过ADS进行仿真。由仿真结果可知,在2.2～2.8GHz双工器全频带内输入端口的反射系数S11均优于-17.00dB,通带2.2～2.5GHz带内插损S21最优为-2.09dB,通带2.5～2.8GHz带内插损S31为-2.53dB,其中两通带的交接点2.5GHz处插损约-6.5dB。实测结果与仿真结果基本吻合。     

基于DGS 结构的微带岔线型带通滤波器设计

本文介绍了一种基于缺陷地结构(DGS)的微带岔线型宽带带通滤波器的设计过程。此滤波器以四分之一波长的开路枝节型带通滤波器为原型进行设计和改进,引入了微带岔线和DGS 结构,在增加通带带宽和阻带带宽的同时,使滤波器的带外谐波抑制和带内回波损耗得到了很大的改善。采用HFSS 三维场仿真软件进行S 参数的仿真,从仿真结果可 以看出,所设计的带通滤波器中心频率为11.5GHz,其3dB 相对带宽大于50%,带内插损小于0.3dB。此外,在1-6GHz的第一阻带内,滤波器的带外抑制大于20dB,最大抑制度为52dB;在15-24GHz 的第二阻带内滤波器的带外抑制大于20dB,最大抑制度为46dB。整个滤波器尺寸仅为12mm × 16mm。     

基于SGS的UWB滤波器设计

在传统哑铃型缺陷接地结构(defected ground structure,DGS)的基础上,提出了一种分割地结构(split ground structure),通过在传统哑铃型DGS上添加一条缝,形成了SGS结构,不仅有低通特性,而且产生了高通特性,即具有带通特性。借助于HFSS软件,比较了传统哑铃型DGS与SGS的仿真结果,分析了SGS结构参数变化对其频率特性的影响。并以此为基础设计了一种新颖的超宽带(UWB)带通滤波器,中心频率6.85 GHz,相对带宽110%,上边带20 dB阻带抑制达20 GHz。仿真结果表明,该滤波器具有较好的频率特性,说明基于SGS的UWB带通滤波器设计的有效性和可行性。     

一种基于DGS和EBG混合结构的毫米波滤波器设计

设计了一款可应用于毫米波频段（22.5～29.5 GHz）的小型化、高性能带通滤波器。首先利用羊角型DGS结构的谐振特性,在基片集成波导（Substrate integrated waveguide,SIW）的高通通带内产生阻带和低通特性;之后在滤波器输入微带线上耦合U型电磁带隙结构（Electromagnetic band gap,EBG）,利用该结构产生的两传输零点之间的带宽可以调整的特性,来保证滤波器通带带宽及提供高带外抑制;最后利用电磁仿真软件HFSS 13.0对滤波器进行仿真与优化。实测结果表明,该滤波器整体尺寸为10 mm×5 mm,中心频率为26 GHz,3 dB截止频率分别为22.1 GHz和29.3 GHz,带宽为7.2 GHz,相对带宽达到了28%,滤波器的插入损耗为1 dB,回波损耗优于15 dB,上、下边带带外抑制均优于25 dB,可应用于毫米波频段无线通信系统中。     

基于D-CRLH传输线的带阻滤波器

提出了一种新型对偶复合左右手传输线(Dual Composite Right/Left-handed Transmission Line,D-CRLHTL)结构,该结构单元由T型缺陷地(T-shaped defected ground structure,T-DGS)结构以及矩形贴片短截线组成,基于对传输线单元结构传输特性的全波仿真分析,设计了一款带阻滤波器。由于利用了基于T-DGS的D-CRLH传输线,该带阻滤波器具有较小的尺寸和更加陡峭的边沿特性。实验结果和仿真设计结果吻合较好:阻带中心频率为4.15GHz,插入损耗为30dB,3dB带宽为1.9GHz,20dB带宽为1.55GHz。     

开路边缘平行耦合微带带通滤波器的设计

本文首先对开路边缘平行耦合微带带通滤波器的滤波特性进行了分析,接着使用微波仿真软件ADS对其进行了仿真.仿真时根据设计指标用ADS的优化功能对原理图进行多次优化,优化时注重对多个参数实行逐个优化,使得优化的速度更快.通过对一中心频率为3.05GHz带宽为3.3%的带通滤波器进行仿真,结果很好地满足设计指标.基于ADS优...     

带DGS的互补型传导传输线双模滤波器

介绍了一种带有缺陷地结构的互补型传导传输线带通滤波器结构,并对其进行了电磁仿真,得到比较好的结果.该结构在使用环形谐振器缩小器件尺寸的基础上,引入互补型传导传输线,使得滤波器保持性能良好的基础上进一步缩小尺寸."螺旋"形DGS结构用来抑制谐波效应,使得带通滤波器的整体性能得到显著优化.该滤波器在中心频率915 MHz处回波损耗达到20.5 dB,通带内最小插入损耗为1.9 dB,3 dB带宽为52 MHz.该带通滤波器便于在微波集成电路中使用,有利于实现设备的小型化.     

A novel compact K band PBG microstrip structure band-pass filter

A novel K band band-pass filter based on photonic band-gap (PBG) is presented. The proposed structures exhibit low insertion loss, compact size, simple fabrication and slow-wave characteristics. Due to slow-wave characteristic, PBG structure minimizes the pass-band filter to one-tenth of conventional filters with spurious-free response and deep attenuation levels. The miniature band-pass filter was simulated, realized and measured. There is a good agreement between the experiment and simulation results had been achieved. Its center pass-band frequency of this filter is 25.2?GHz, and insertion loss is less than ?4.5?dB.     

A photonic bandgap microstrip filter based on YBCO superconducting film

Photonic bandgap (PBG) structures can stop propagation of electromagnetic waves of certain frequencies and hence can be applied to construction of microstrip filters. In this paper, a novel PBG microstrip filter based on YBa/sub 2/Cu/sub 3/O/sub 7/ high-temperature superconductor films is presented. The PBG patterns forming the filters were etched on a 0.3- and a 0.7-/spl mu/m-thick film. Experimental results showed that the transmission coefficient S/sub 21/ of the filter is dependent on the thickness of the YBa/sub 2/Cu/sub 3/O/sub 7-x/ film. The thinner PBG filter exhibits an effective stopband of a center frequency of 20 GHz, a bandwidth of 4.7 GHz (at -40 dB), an attenuation of -55 dB, and a rolloff rate of 38 dB/GHz, while the thicker structure exhibits narrow notches only in the S/sub 21/ characteristics.     

用μwave Wizard软件设计腔体交指滤波器

基于μwave Wizard软件仿真腔体交指滤波器的方法,设计了一个中心频率为5.52 GHz,带宽为1.4 GHz的交指滤波器,并采用矩形杆抽头线结构实现。制作的滤波器插损小于1.5 dB,驻波比小于1.7,带外抑制大于40 dB(f0±1 GHz),具有优良的带通特性。给出滤波器的实测曲线和仿真曲线,两者的一致性较好。     

太赫兹波段FSS带通滤波器的分析与设计

用HFSS仿真软件设计并分析了太赫兹频段的频率选择表面带通滤波器。其中缝隙滤波器的中心工作频率为0.346THz,透过率达到99.37%,3 dB带宽可以达到75 GHz。3层方环级联带通滤波器的通带比缝隙滤波器通带更为平坦,3 dB带宽达到了100 GHz,矩形系数也有大幅度提高。两种滤波器在不同极化波和相同极化波不同入射角度入射时都有很好的频率稳定性,并且中心工作频率在太赫兹大气窗口,可适用于太赫兹通信。     

双波段高抑制的LTCC微型双工器设计

该文设计了基于低温共烧陶瓷(LTCC)技术的双波段高抑制、低损耗的双工器。该双工器由低通滤波器和带通滤波器组成,且在低、高频段的阻带抑制方面运用了传输零点理论,在实现双工器低损耗的同时,也实现了在多波段的高抑制,提升了双工器的性能。该双工器在低频段(0.68~0.95 GHz)及高频段(1.43~2.40 GHz)时插损均小于1.2 dB,但在1.43~2.40 GHz时双工器抑制大于20 dB,0.68~0.95 GHz时双工器抑制大于15 dB。在4.9~5.9 GHz时双工器抑制大于13 dB,具有良好的市场应用前景。     

3.4GHz频率的S波段SAW滤波器

该文研制了一款频率3.4 GHz的S波段声表面波(SAW)滤波器。该滤波器采用一种由新型谐振器构成的阻抗元结构,能提升抗热释电静电损伤能力,用时可在一定程度上提升器件的功率承受能力。同时研制了尺寸为2.0 mm×1.6 mm的芯片级封装(CSP)基板。采用倒装焊工艺实现了芯片与CSP基板的电连接,降低了电磁寄生影响。结果表明,研制的SAW滤波器频率为3.408 GHz,插损为2.23 dB,8 GHz远端阻带大于30 dB,且实测的功率承受能力达到30 dBm。     

0.22 THz Waveguide Bandpass Filter with High Stop-Band Suppression

A terahertz (THz) waveguide band-pass filter using an iris inductive window coupled structure was designed and fabricated. The filter was designed at 0.22 THz with a pass band of 20 GHz. The measured results show that the center frequency is 0.218 THz with a pass band of 0.205 THz to 0.231 THz, the minimum insertion loss is 1.26 dB at 0.224 THz, and the return loss is less than 13.1 dB. The stop-band suppression is 65.6 dB at 0.193 THz and 51.8 dB at 0.243 THz, respectively, which means a good performance of high stop-band suppression. A good agreement exists between the measured S-parameters and the simulated ones, especially in the upper band. The proposed THz waveguide filter has potential applications in THz communications.     

Dual mode wideband band-pass filter with notched band for communication system

This paper presents a planar microstrip wideband dual mode Band-Pass Filter (BPF) from 2 GHz to 3.4 GHz with a notched band at 2.62 GHz. The dual mode band-pass filter consists of a ring resonator with two quarter-wavelength open-circuited stubs at ?? =90° and ?? =0°, respectively. A square perturbation stub has been put at the corner of the ring resonator to increase the narrow stopbands and improve the performance of selectivity. By using a parallel-coupled feed line, a narrow notched band is introduced at the required frequency and its Fractional BandWidth (FBW) is about 5%. The proposed filter has a narrow notched band and a wide pass-band with a sharp cutoff frequency characteristic, the attenuation rate for the sharp cutoff frequency responses is 297.17 dB/GHz (calculated from 1.959 GHz with ?34.43 dB to 2.065 GHz with ?2.93 dB) and 228.10 dB/GHz (calculated from 3.395 GHz with ?2.873 dB to 3.507 GHz with ?28.42 dB). This filter has the advantages of good insertion loss in both operating bands and two rejections of greater than 16 dB in the range of 1.59 GHz to 1.99 GHz and 3.49 GHz to 3.98 GHz. Having been presented in this article, the measurement results agree well with the simulation results, which validates our idea.     

345 GHz Band-Pass Filter Using Ultra-Precision Machining Technology

This paper presents a terahertz (THz) band-pass filter using ultra-precision machining technology based on Chebyshev filter prototype. This iris inductive window coupled waveguide filter was designed by using 8 resonant cavities with a center frequency of 345 GHz and a 7% bandwidth. The final design fulfills the desired specifications and presents the minimum insertion loss of 1.55 dB and the return loss of less than 15 dB at 345 GHz. The stop-band rejection is 50 dB off the center frequency about 30 GHz, which means it has a good performance of high stop-band suppression. Compared with the recent development of THz filters, this filter possesses the characteristic of simple structure and is easy to machining.     

基于双层扇形基片集成波导的双频平衡滤波器

提出了一种表面刻有一对互补开环谐振器(CSRR)的45°扇形基片集成波导谐振腔(SSIWR),设计并制作了一款结构紧凑且具有高选择性的双层双频平衡带通滤波器.分别利用具有带通特性的CSRR和谐振腔内的TM220模实现了差模双频响应;模式间的耦合以及缺陷地结构(DGS)的引入使得滤波器在通带附近产生4个传输零点,提高了带...