Evidence of multimicrometric coherent γ′ precipitates in a hot‐forged γ–γ′ nickel‐based superalloy

This paper demonstrates the existence of large γ’ precipitates (several micrometres in diameter) that are coherent with their surrounding matrix grain in a commercial γ–γ’ nickel‐based superalloy. The use of combined energy dispersive X‐ray spectrometry and electron backscattered diffraction (EBSD) analyses allowed for revealing that surprising feature, which was then confirmed by transmission electron microscopy (TEM). Coherency for such large second‐phase particles is supported by a very low crystal lattice misfit between the two phases, which was confirmed thanks to X‐ray diffractograms and TEM selected area electron diffraction patterns. Dynamic recrystallization of polycrystalline γ–γ’ nickel‐based superalloys has been extensively studied in terms of mechanisms and kinetics. As in many materials with low stacking fault energy, under forging conditions, the main softening mechanism is discontinuous dynamic recrystallization. This mechanism occurs with preferential nucleation on the grain boundaries of the deformed matrix. The latter is then being consumed by the growth of the newly formed grains of low energy and by nucleation that keeps generating new grains. In the case of sub‐solvus forging, large γ’ particles usually pin the migrating boundaries and thus limit grain growth to a size which is determined by the distribution of second‐phase particles, in good agreement with the Smith–Zener model. Under particular circumstances, the driving force associated with the difference in stored energy between the growing grains and the matrix can be large enough that the pinning forces can be overcome, and some grains can then reach much larger grain sizes. In the latter exceptional case, some intragranular primary γ’ particles can be observed, although they are almost exclusively located on grain boundaries and triple junctions otherwise. In both cases, primary precipitates have no special orientation relationship with the surrounding matrix grain(s). This paper demonstrates the existence of high fractions of large γ’ precipitate (several micrometres in diameter) that are coherent with their surrounding matrix grain, in a commercial γ–γ’ nickel‐based superalloy. Such a configuration is very surprising, because there is apparently no reason for the coherency of such particles.     

A high-resolution electron microscopic study of defects in sodium β′″-alumina

A high-resolution electron-microscopic study of sodium β′″-alumina, a polytype of the more-widely-studied sodium β- and β″-alumina, has been undertaken using the 600 kV instrument at Cambridge University. Images revealed the loss of sodium-containing planes, which had caused crystals to collapse and shear into defect layers. A model for the structure of these defects is proposed, based on the use of computed images and by comparison with high-resolution images of silver β″-alumina.     

Sliding wear behaviour of Ca α-sialon ceramics at 600 °C in air

As an extension of a previous investigation on the wear behaviour of Ca α-sialon ceramics of differing microstructures at room temperature, wear testing was conducted at 600 °C in air to explore the effects of microstructure, contact pressure and sliding speed on the wear behaviour. Under all loading conditions from 1 MPa to 1 GPa, a constant high friction coefficient was observed and a severe wear process was dominant, in which the sliding contact induced cracks were observed in different microstructures. Wear particles were generated along the wear track, but no tribofilm was detected. Increasing the sliding speed from 10 to 23 cm/s was found to significantly increase wear rate. However, variations in microstructure had little impact. That is, large elongated-grained α-sialon exhibited only a slightly lower wear rate than fine equiaxed-grained α-sialon.     

Measurement of translation component at ordered interfaces by weak-beam α-fringe electron microscopy

Lattice translations at a stacking fault and a twin boundary were measured from fringe shifts at a set of common weak-beam diffraction conditions (weak-beam α-fringe imaging) in stainless steel SUS316. It is suggested that the present technique is applicable in determining the translation component between neighbouring crystals with coincidence related boundaries.     

Chromatographic and non‐chromatographic characterization of poly‐α‐olefins

Both chromatographic and non‐chromatographic techniques were used in the characterization and identification of poly‐α‐olefins. Synthetic base oils, although produced from the same raw material, exhibit different physico‐chemical properties. Their mutual miscibility and behaviour in final engine oils may be predicted from data collected through classical physico‐chemical analysis, simulated distillation chromatography as well as inverse gas chromatography. Copyright © 2007 John Wiley & Sons, Ltd.     

Molecular dynamics simulation of deformation behavior in amorphous polymer: nucleation of chain entanglements and network structure under uniaxial tension

In order to clarify the mechanical behavior of molecular chains in amorphous polymers, a molecular dynamics simulation is conducted on a nanoscopic specimen of amorphous polyethylene under uniaxial tension. The specimen involves 3542 random coil molecular chains composed of 500–1500 methylene monomers with about two million methylene groups. The stress–strain curve shows a linear elastic relationship at the initial stage of _zz0.03 at . Then the material “yields” by elongating without stress increase up to the strain of 1.5, where strain hardening appears. Careful investigation of changes in dihedral angle and morphology of all molecular chains reveals that the gauche→trans transition takes place during yielding, generating a new network-like structure composed of entangled molecular clusters and oriented chains bridging them. The strain hardening is due to the directional orientation and stretching of molecular chains between entanglements in the nucleated structure.     

Structural and electron diffraction data for sapphire (α-al2o3)

Crystallographic and electron diffraction data for sapphire (α-Al₂O₃) are presented which enable ready and unique identification of TEM diffraction patterns and facilitate image analysis. Crystallographic data is presented in the form of stereographic projections and in figures listing angles between planes and angles between zones. Electron diffraction data consist of computer-simulated diffraction patterns and tables of extinction distances calculated using atomic and ionic electron scattering factors.     

Reflection electron imaging and spectroscopy studies of aluminium metal reduction at α-aluminium oxide (0,1,2) surfaces

Cleaved α-aluminium oxide (0,1,2) surfaces are studied using combined techniques of scanning reflection electron microscopy and reflection electron energy-loss spectroscopy. An α-aluminium oxide (0,1,2) surface can terminate with a layer of either oxygen or Al atoms depending on where the bonds break. Aluminium metal can be reduced only from the domains initially terminated with oxygen by an intensive electron beam. The interpretation of this damage effect is based on the desorption process of oxygen atoms after Auger decay. The resistance to beam damage of the domains initially terminated with Al is found to be due to the protection of the surface adsorbed amorphous oxygen layer.     

Effect of indirubin‐3‐monoxime against lung cancer as evaluated by histological and transmission electron microscopic studies

The aim of this study is to evaluate the antitumor effect of indirubin‐3‐monoxime and its mode of action in benzo(α)pyrene [B(α)P] induced lung cancer in A/J mice. Light microscopic examination of lung sections of [B(α)P] induced lung cancer mice revealed the presence of adenocarcinoma characterized by extensive proliferation of alveolar epithelium and loss of alveolar spaces. The control lung tissue showed a normal architecture with clear alveolar spaces. Interestingly the indirubin‐3‐monoxime treated groups showed the reduced adenocarcinoma with appearance of alveolar spaces. Transmission Electron Microscopic (TEM) studies of lung sections of [B(α)P] induced lung cancer mice showed the presence of phaemorphic cells with dense granules and increased mitochondria. The lung sections of mice treated with indirubin‐3‐monoxime showed the presence of shrunken, fragmented, and condensed nuclei implying apoptosis. The effects were dose dependent and prominent in 10 mg/kg/5 d/week groups suggesting the therapeutic role of indirubin analogue against this deadly human malignancy. Here, our results indicate that indirubin‐3‐monoxime brings antitumor effect against [B(α)P] induced lung cancer by its apoptotic action in A/J mice. Microsc. Res. Tech. 73:1053–1058, 2010. © 2010 Wiley‐Liss, Inc.     

Increased androgen receptor and remodeling in the prostatic stroma after the inhibition of 5‐alpha reductase and aromatase in gerbil ventral prostate

Prostate require high levels of steroidogenic enzymes such as 5α‐reductase (5α‐r) and Aromatase (Aro) for the formation of active steroids. Dihydrotestosterone (DHT), the prostate dominant androgen, is converted from testosterone (T) by the action of 5α‐r. Aro provides an alternative pathway for estrogen, via T aromatization. Since prostatic maintenance is dependent on both reciprocal stromal–epithelial interaction and regulation by steroids, this study aimed to elucidate what the absence of 5α‐r and Aro enzymes provokes in the prostate microenvironment after their long‐term inhibition. Data obtained 1 day after the 30 consecutive days of enzymatic inhibition with Finasteride (5α‐r inhibitor) and Letrozole (Aro inhibitor) demonstrated a marked stromal remodeling, with an increased deposition of extracellular matrix (ECM) proteins besides androgen receptor (AR) overexpression in the three phases of postnatal development analyzed. The subepithelial area of acini from ventral prostate presented collagen and reticular fibers accumulation, besides various altered and active fibroblasts. The AR content immunostaining was elevated after enzymatic inhibition therapy, mainly in the nuclei of epithelial cells. Similar data were observed in the ventral prostates even 21 days after the end of treatments. Results obtained following the long‐term inhibition of 5α‐r and Aro are relevant and highlight the actions of these enzymes as crucial not only for the maintenance of tissue architecture and ECM arrangement but also for androgen and AR function. The long‐term absence of their action imposes a novel situation on the prostate from which its normal physiology could not be restored by the conclusion of the treatments. Microsc. Res. Tech., 2009. © 2009 Wiley‐Liss, Inc.