K88 Fimbrial Adhesin Targeting of Microspheres Containing Gentamicin Made with Albumin Glycated with Lactose

The formulation and characterization of gentamicin-loaded microspheres as a delivery system targeting enterotoxigenic Escherichia coli K88 (E. coli K88) was investigated. Glycated albumin with lactose (BSA-glucose-β (4-1) galactose) was used as the microsphere matrix (MS-Lac) and gentamicin included as the transported antibiotic. The proposed target strategy was that exposed galactoses of MS-Lac could be specifically recognized by E. coli K88 adhesins, and the delivery of gentamicin would inhibit bacterial growth. Lactosylated microspheres (MS-Lac1, MS-Lac2 and MS-Lac3) were obtained using a water-in-oil emulsion, containing gentamicin, followed by crosslinking with different concentrations of glutaraldehyde. Electron microscopy displayed spherical particles with a mean size of 10–17 µm. In vitro release of gentamicin from MS-Lac was best fitted to a first order model, and the antibacterial activity of encapsulated and free gentamicin was comparable. MS-Lac treatments were recognized by plant galactose-specific lectins from Ricinus communis and Sophora japonica and by E. coli K88 adhesins. Results indicate MS-Lac1, produced with 4.2 mg/mL of crosslinker, as the best treatment and that lactosylated microsphere are promising platforms to obtain an active, targeted system against E. coli K88 infections.     

Antimicrobial polyurethane coatings based on ionic liquid quaternary ammonium compounds

The antimicrobial effect of ionic liquids (ILs) as comonomers in polyurethane surface coatings was investigated. Ionic liquid-containing coatings were prepared from a hydroxyl end-capped liquid oligoester and a triisocyanate crosslinker. Three different commercially available hydroxyl end-capped ionic liquids were covalently incorporated into the coatings in order to end up with antimicrobial polyurethane films. The ionic liquids used in this study were chosen because of their structural similarities to other antimicrobial quaternary ammonium compounds (QACs). Prepared films have been examined against both Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli type bacteria, and showed strong antimicrobial activity.     

Self-stratifying antimicrobial polyurethane coatings

In this work antimicrobial polyurethane coatings were prepared aiming at self-stratification. A hydroxyl end-capped liquid oligoester consisting of three equimolar diacids and an excess of 1,4-butanediol has been synthesized by a condensation reaction. A set of quaternary ammonium compounds (QACs) which are well known contact killers, was synthesized via a straightforward quaternization reaction. These synthesized precursors were later covalently bonded to the polymer network by addition of a polyisocyanate crosslinker resulting in antimicrobial polyurethane coatings. Self-stratification was confirmed by dynamic contact angle analysis and X-ray photoelectron spectroscopy. The final films showed strong antimicrobial activity against both Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli type bacteria.     

Protein Ligation-Assisted Reconstitution of Split HRP Fragments for Facile Production of HRP Fusion Proteins in E. coli

Horseradish peroxidase (HRP) is a pivotal biocatalyst for biosensor development and fine chemical synthesis. HRP proteins are mostly extracted and purified from the roots of horseradish because the solubility and productivity of recombinant HRP in bacteria are significantly low. In this study, we investigate the reconstitution system of split HRP fragments to improve its soluble expression levels in E. coli allowing the cost-effective production of bioactive HRPs. To promote the effective association between two HRP fragments (HRPn and HRPc), we exploit SpyTag-SpyCatcher chemistry, a versatile protein coupling method with high affinity and selectivity. Each HRP fragment was genetically fused with SpyTag and SpyCatcher, respectively, exhibiting soluble expression in the E. coli cytoplasm. The engineered split HRPs were effectively and irreversibly reconstituted into a biologically active and stable assembly that can catalyze intrinsic enzymatic reactions. Compared to the chaperone co-expression system, our approach shows that the production yield of soluble HRP is comparable, but the purity of the final product is relatively high. Therefore, our results can be applied to the high-yield production of recombinant HRP variants and other difficult-to-express proteins in bacteria without complex downstream processes.     

Ferrocenium hexafluorophosphate-induced nanofibrillarity of polyaniline-polyvinyl sulfonate electropolymer and application in an amperometric enzyme biosensor

The formation of nanofibrillar polyaniline-polyvinyl sulfonate (Pani-PVS) composite by electropolymerization of aniline in the presence of ferrocenium hexafluorophophate (FcPF₆) and its application in mediated-enzyme biosensor using the horseradish peroxidase/hydrogen peroxide (HRP/H₂O₂) enzyme-substrate system is reported. The electropolymerization was carried out at glassy carbon electrodes (GCE) and screen printed carbon electrodes (SPCE) in a strongly acidic medium (HCl). Scanning electron microscopy (SEM) images showed that 100 nm diameter nanofibrils were formed on the SPCE in contrast to the 800-1000 nm cauliflower-shaped clusters which were formed in the absence of FcPF₆. A model biosensor (GCE//Pani-PVS/BSA/HRP/Glu), consisting of horseradish peroxidase (HRP) immobilized by drop coating atop the GCE//Pani-PVS in the presence of bovine serum albumin (BSA) and glutaraldehyde (glu) in the enzyme layer casting solution, exhibited voltammetric responses characteristic of a mediated-enzyme system. The biosensor response to H₂O₂ was very fast (5 s) and it exhibited a detection limit of 30 μM (3σ) and a linearity of up to 2 mM (R² = 0.998). The relatively high apparent Michaelis-Menten constant value () of the sensor indicated that the immobilized enzyme was in a biocompatible microenvironment. The freshly prepared biosensor was successfully applied in the determination of the H₂O₂ content of a commercial tooth whitening gel with a very good recovery rate (97%).     

Kinetics of Salmonella typhimurium binding with antibody by immunoassays using a surface plasmon resonance biosensor

This study examined the kinetics of Salmonella typhimurium binding to an antibody using a direct assay and sandwich assay with a surface plasmon resonance (SPR) biosensor. A kinetic model was proposed based on curve-fitting of the experimental SPR sensorgrams using an integral rate equation. The SPR sensitivity in the sandwich assay was significantly higher than that in the direct assay. The association rate constants and affinities of the cell in the sandwich assay were double those in the direct assay. The enhanced binding attraction between the cell and detection antibody in the sandwich assay improved the lower limit of detection.     

A perovskite-type KNbO3 nanoneedles based biosensor for direct electrochemistry of hydrogen peroxide

A KNbO₃ nanoneedles (KNs) based hydrogen peroxide (H₂O₂) biosensor was first proposed. Perovskite-type KNs can directly catalyze H₂O₂. The mechanism can be explained by Molecular Orbital Principles, with the formation of σ-bonding between the e_g orbital of surface niobium ions and surface adsorbed oxygen-related intermediate species. Direct electron transfer between the Horseradish peroxidase (HRP) and electrode surface was achieved. Co-catalyst system of both HRP and KNbO₃ was introduced to the oxidation of H₂O₂, thus the as-prepared biosensor exhibited high sensitivity (750 μA mM⁻¹ cm⁻²) and ultrafast response (1–2 s) to H₂O₂. Therefore, KNs provide a promising material for enzymes assembly and sensing application.     

Amperometric bienzyme glucose biosensor based on carbon nanotube modified electrode with electropolymerized poly(toluidine blue O) film

The amperometric bienzyme glucose biosensor utilizing horseradish peroxidase (HRP) and glucose oxidase (GOx) immobilized in poly(toluidine blue O) (PTBO) film was constructed on multi-walled carbon nanotube (MWNT) modified glassy carbon electrode. The HRP layer could be used to analyze hydrogen peroxide with toluidine blue O (TBO) mediators, while the bienzyme system (HRP + GOx) could be utilized for glucose determination. Glucose underwent biocatalytic oxidation by GOx in the presence of oxygen to yield H₂O₂ which was further reduced by HRP at the MWNT-modified electrode with TBO mediators. In the absence of oxygen, glucose oxidation proceeded with electron transfer between GOx and the electrode mediated by TBO moieties without H₂O₂ production. The bienzyme electrode offered high sensitivity for amperometric determination of glucose at low potential, displaying Michaelis-Menten kinetics. The bienzyme glucose biosensor displayed linear response from 0.1 to 1.2 mM with a sensitivity of 113 mA M⁻¹ cm⁻² at an applied potential of −0.10 V in air-saturated electrolytes.     

A Concise,Modular Antibody–Oligonucleotide Conjugation Strategy Based on Disuccinimidyl Ester Activation Chemistry

The synthesis of antibody–oligonucleotide conjugates has enabled the development of highly sensitive bioassays for specific epitopes in the laboratory and clinic. Most synthetic schemes to generate these hybrid molecules require expensive reagents, significant quantities of input antibody, and multistep purification routes; thus limiting widespread application. Herein a facile and robust conjugation strategy is reported that involves “plug-and-play” antibody conjugation with succinimidyl-functionalized oligonucleotides, which are high yielding and compatible for use directly after buffer exchange. The succinimidyl-linked oligonucleotides are synthesized with 5′-amine-modified oligonucleotides and disuccinimidyl suberate (DSS), both of which are inexpensive and commercially available. Direct incubation of the resulting stable succinimidyl– oligonucleotide conjugates with commercial antibodies yields conjugates ready for use after benchtop buffer exchange. It is demonstrated that the resulting oligonucleotide–antibody and oligonucleotide–streptavidin conjugates retain potent and specific binding in activity-dependent proximity ligation imaging, and proximity ligation-mediated qPCR detection of endogenous proteins in native cellular contexts down to picogram levels of whole proteome. This DSS conjugation strategy should be widely applicable in the synthesis of protein–oligonucleotide conjugates.     

A third-generation hydrogen peroxide biosensor based on Horseradish Peroxidase (HRP) enzyme immobilized in a Nafion-Sonogel-Carbon composite

A third-generation biosensor based on HRP and a Sonogel-Carbon electrode has been fabricated with the aim of monitoring hydrogen peroxide in aqueous media via a direct electron transfer process. The redox activity of native HRP, typical of thin-layer electrochemistry, was observed. The charge coefficient transfer, α, and the heterogeneous electron transfer rate constant, k_s, were calculated to be 0.51 ± 0.04 and 1.29 ± 0.04 s⁻¹, respectively. Topographic study by atomic force microscopy (AFM) shows that the enzyme may have been introduced inside the ionic cluster of the Nafion. The immobilized HRP exhibited excellent electrocatalytical response to the reduction of H₂O₂ and preserved its native state after the immobilization stage. Several important experimental variables were optimized. The resulting biosensor showed a linear response to H₂O₂ over a concentration range from 4 to 100 μM, with a sensitivity of 12.8 nA/μM cm⁻² and a detection limit of 1.6 μM, calculated as (3 S.D./sensitivity). The apparent Michaelis-Menten constant was calculated to be 0.295 ± 0.020 mM. The biosensor showed high sensitivity as well as good stability and reproducibility. The performance of the biosensor was evaluated with respect to four possible interferences.     

Evaluation of protein adsorption on hydrogenated amorphous carbon films by surface plasmon resonance phenomenon

To develop an anti-thrombogenic coating, hydrogenated amorphous carbon (a-C:H) and related films were studied in terms of their protein adsorption during the initial process in thrombogenesis by surface plasmon resonance (SPR) phenomenon using a multilayer device consisting of an a-C:H layer on Au. Two a-C:H films with different hydrogen contents, a nitrogenated a-C:H (a-C:N:H) and a fluorinated amorphous carbon (a-C:F) film were prepared on the Au layer in the multilayer device. Human serum albumin (HSA) in a phosphor buffer (PB) was used as a protein. Na₂HPO₄·12H₂O, NaH₂PO₄·2H₂O and deionized water were mixed to coordinate PB. From the attenuation of reflected light, the SPR angle was determined to the angle at minimum reflection intensity. The observed behavior of the SPR angle indicated that HSA was adsorbed on all films. The SPR angle was analyzed to estimate the multilayer index of the HSA-adsorbed layer on each film. The HSA adsorption ability of both a-C:H and a-C:N:H films was similar, and the absorption ability of the a-C:F film was lower than that of the other films. Hence, the surface polarization dominates the adsorption ability of HSA on a-C:H films and related film.     

Effect of Molybdenum Disulfide Layer on Surface Plasmon Resonance Biosensor for the Detection of Bacteria

In this study, a molybdenum disulfide (MoS₂) based surface plasmon resonance (SPR) biosensor is proposed. The reflectance curves for the proposed SPR biosensor are analyzed and compared with the graphene based and the conventional SPR biosensors. It is observed that the performance parameters of the proposed biosensor- sensitivity, detection accuracy, and the quality factor are enhanced by the utilization of the adsorption property of MoS₂ for monolayer and bi-layer MoS₂. Also, the effect of increasing the number of layers of MoS₂ on the reflectance curve is analyzed and compared.     

The study of antimicrobial activity and preservative effects of nanosilver ingredient

In this study, we investigated the antimicrobial activity of silver nanoparticles (Ag-NPs) and platinum nanoparticles (Pt-NPs) aqueous solution, which were prepared using different stabilizer, such as sodium dodecylsulfate (SDS) and poly-(N-vinyl-2-pyrrolidone) (PVP), for Staphylococcus aureus (S. aureus) and Escherichia coli (E.coli) by measuring the minimum inhibitory concentration (MIC). Antimicrobial effect of Ag-NPs for S. aureus and E. coli was investigated using cup diffusion method. The growth of Gram-positive (S. aureus) and Gram-negative (E. coli) bacteria were inhibited by Ag-NPs. The MIC of Ag-NPs for S. aureus and E. coli were 5 and 10 ppm, respectively. But the Au-NPs stabilized with SDS did not show antimicrobial activity. Also, the Pt-NPs stabilized with PVP (or SDS) did not show antimicrobial activity for the test organisms.     

Amperometric tyrosinase biosensor based on Fe3O4 nanoparticles-coated carbon nanotubes nanocomposite for rapid detection of coliforms

A tyrosinase (Tyr) biosensor was developed based on Fe₃O₄ magnetic nanoparticles (MNPs)-coated carbon nanotubes (CNTs) nanocomposite and further applied to detect the concentration of coliforms with flow injection assay (FIA) system. Negatively charged MNPs were absorbed onto the surface of CNTs which were wrapped with cationic polyelectrolyte poly(dimethyldiallylammonium chloride) (PDDA). The Fe₃O₄ MNPs-coated CNTs nanocomposite was modified on the surface of the glassy carbon electrode (GCE), and Tyr was loaded on the modified electrode by glutaraldehyde. The immobilization matrix provided a good microenvironment for retaining the bioactivity of Tyr, and CNTs incorporated into the nanocomposite led to the improved electrochemical detection of phenol. The Tyr biosensor showed broad linear response of 1.0 × 10⁻⁸-3.9 × 10⁻⁵ M, low detection limit of 5.0 × 10⁻⁹ M and high sensitivity of 516 mA/M for the determination of phenol. Moreover, the biosensor integrated with a FIA system was used to monitor coliforms, represented by Escherichia coli (E. coli). The detection principle was based on determination of phenol which was produced by enzymatic reaction in the E. coli solution. Under the optimal conditions, the current responses obtained in the FIA system were proportional to the concentration of bacteria ranging from 20 to 1 × 10⁵ cfu/mL with detection limit of 10 cfu/mL and the overall assay time of about 4 h. The developed biosensor with the FIA system was well suited for quick and automatic clinical diagnostics and water quality analysis.     

Palygorskite-poly(o-phenylenediamine) nanocomposite: An enhanced electrochemical platform for glucose biosensing

Palygorskite (Pal) may be a promising material for enzyme immobilization due to its large surface, high biocompatibility and stability. This attractive material combined with a conducting polymer, poly(o-phenylenediamine), was exploited as a platform for the immobilization of glucose oxidase (GOD) using glutaraldehyde as crosslinker, and thus a novel glucose biosensor was obtained. The results of electrochemical impedance spectroscopy (EIS) and SEM indicated the successful entrapment of GOD in the clay polymer nanocomposite (CPN) film. Amperometric detection of glucose was performed by holding the potential at the CPN electrode at 0.6 V for the oxidation of H₂O₂ generated in the enzymatic reaction. The apparent Michaelis–Menten constant (K_M^app) was calculated to be 5.25 mM, which is close to that of the free enzyme. The proposed biosensor exhibited a wide linear range, a low detection limit, a good reproducibility and accepted stability in the determination of glucose, providing a biocompatible platform for glucose biosensing.     

Study of Linkage between Glutathione Pathway and the Antibiotic Resistance of Escherichia coli from Patients’ Swabs

In this work, we focused on the differences between bacterial cultures of E. coli obtained from swabs of infectious wounds of patients compared to laboratory E. coli. In addition, blocking of the protein responsible for the synthesis of glutathione (γ-glutamylcysteine synthase—GCL) using 10 mM buthionine sulfoximine was investigated. Each E. coli showed significant differences in resistance to antibiotics. According to the determined resistance, E. coli were divided into experimental groups based on a statistical evaluation of their properties as more resistant and more sensitive. These groups were also used for finding the differences in a dependence of the glutathione pathway on resistance to antibiotics. More sensitive E. coli showed the same kinetics of glutathione synthesis while blocking GCL (K_m 0.1 µM), as compared to non-blocking. In addition, the most frequent mutations in genes of glutathione synthetase, glutathione peroxidase and glutathione reductase were observed in this group compared to laboratory E.coli. The group of “more resistant” E. coli exhibited differences in K_m between 0.3 and 0.8 µM. The number of mutations compared to the laboratory E. coli was substantially lower compared to the other group.     

Bioelectrocatalytic properties of Agrocybe aegerita peroxygenase

A biosensor for detecting the aromatic substance 4-nitrophenol based on Agrocybe aegerita peroxygenase (AaP) immobilized with chitosan-stabilized gold nanoparticles is presented here. This biosensor measures the enzymatic product of 4-nitrophenol peroxygenation, 4-nitrocatechol, which is electrochemically detected in the presence of hydrogen peroxide. Cyclic voltammetry and amperometry were used to characterize the proposed biosensor. The linear range of the AaP biosensor for the detection of 4-nitrophenol was between 10 and 30 μM with a detection limit of 0.2 μM (based on the S/N = 3). The catalytic property of AaP to oxidize 4-nitrophenol was compared with two other heme proteins, a camphor-hydroxylating cytochrome P450 monooxygenase (P450_cam, CYP101) and horseradish peroxidase (HRP). The results revealed that only AaP is capable of catalyzing the hydroxylation of 4-nitrophenol into 4-nitrocatechol. Consequently, AaP could be a particularly potent biocatalyst that may fill the gap between cytochrome P450s and common heme peroxidases.     

RadA,a Key Gene of the Circadian Rhythm of Escherichia coli

Circadian rhythms are present in almost all living organisms, and their activity relies on molecular clocks. In prokaryotes, a functional molecular clock has been defined only in cyanobacteria. Here, we investigated the presence of circadian rhythms in non-cyanobacterial prokaryotes. The bioinformatic approach was used to identify a homologue of KaiC (circadian gene in cyanobacteria) in Escherichia coli. Then, strains of E. coli (wild type and mutants) were grown on blood agar, and sampling was made every 3 h for 24 h at constant conditions. Gene expression was determined by qRT-PCR, and the rhythmicity was analyzed using the Cosinor model. We identified RadA as a KaiC homologue in E. coli. Expression of radA showed a circadian rhythm persisting at least 3 days, with a peak in the morning. The circadian expression of other E. coli genes was also observed. Gene circadian oscillations were lost in radA mutants of E. coli. This study provides evidence of molecular clock gene expression in E. coli with a circadian rhythm. Such a finding paves the way for new perspectives in antibacterial treatment.     

Controlled multilayer films of sulfonate-capped gold nanoparticles/thionine used for construction of a reagentless bienzymatic glucose biosensor

A novel reagentless bienzymatic sensor for the determination of glucose in the low working potentials without interference is proposed. The bienzymatic sensor was fabricated by covalently attachment of periodate-oxidized glucose oxidase (IO₄⁻-GOx) and horseradish peroxidase (HRP) on controlled multilayer films of sulfonate-capped gold nanoparticles/thionine (SCGNPs/TH). Using the layer-by-layer method (LBL), SCGNPs and TH were deposited alternately on the gold electrode through the electrostatic and covalent interactions. SCGNPs could greatly enhance the amount of immobilized TH and ensure the good conductivity of the whole structure. UV-vis absorption spectroscopy and electrochemical methods showed that the resulting multilayer films were tridimensional conductive and porous, and TH incorporated in LBL configuration had well electroactive performance. Such superstructures can thus provide an ideal matrix for the construction of bienzymatic sensor, where TH molecules acted as a mediator for electron transfer. After IO₄⁻-GOx and HRP were covalently attached to the multilayer precursor film, the resulting biosensor exhibited good electrocatalytical response toward glucose and that the electrocatalytical response increased with the number of TH layers. This suggested that the analytical performance such as sensitivity and detection limit of the bienzymatic sensors could be tuned to the desired level by adjusting the number of deposited SCGNPs/TH bilayers. Furthermore, because of the low working potentials, the interference from other electro-oxidizable compounds (such as uric acid, ascorbic acid and acetaminophen) was avoided, which improved the selectivity of the biosensors. The biosensor constructed with six bilayers of SCGNPs/TH showed a good performance of glucose detection with a fast response less than 20 s, acceptable sensitivity of 3.8 μA mM⁻¹ cm⁻² and the detection limit of 3.5 × 10⁻⁵ M.     

Fibrinogen and lysozyme adsorption on amorphous carbon film surface detected by multilayer device from the back side of the film

To develop hydrogenated amorphous carbon (a-C:H) as a biocompatible coating, a-C:H was studied in terms of its protein adsorption during the initial process of cell adsorption. A multilayer surface plasmon resonance (SPR) device consisting of an a-C:H layer on Au was built in the Kretschmann configuration to detect protein adsorption on an a-C:H film surface. From the dependence of reflectivity on the laser incident angle, SPR angle was determined to the incident angle in which the light intensity was reduced drastically. The proteins considered were lysozyme (Lyz) and fibrinogen (Fib). The SPR angle increased from 58.09 to 58.69° upon the adsorption of Lyz when the nonadsorbed Lyz was removed after introduction of 20 μM Lyz-containing solution. Upon the adsorption of Fib, the SPR angle increased from 60.95 to 61.76° when the nonadsorbed Fib were removed after the introduction of 0.4 μM Fib-containing solution. The shift in the SPR angle was small for both cases. Obtained results suggested that the number of adsorbed Lyz was higher than that of adsorbed Fib.