Optimization of CdSe layer on modified ZnO hierarchical spheres by spin-SILAR for efficient CdS/CdSe co-sensitized solar cells

In this study, after CdS quantum dots sensitized ZnO hierarchical spheres (ZnO HS), we used a simple process to deposit CdSe QDs on ZnO by spin-coating-based SILAR, and applied to photoanodes of quantum dots-sensitized solar cells. Before CdS and CdSe QDs deposition, the ZnO HS photoanodes were modified by Zn(CH₃COO)₂·2H₂O methanol solution to further enhance the open-circuit voltage and power conversion efficiency (PCE). The program of modifying photoanodes and the number of CdSe spin-SILAR cycles are evaluated on the optical and electrochemical properties of the cells. As a result, a high energy conversion efficiency of 2.49 % was obtained by using modified ZnO HS/CdS photoanode under AM 1.5 illumination of 100 mW cm^?2. And further decorated by the CdSe QDs, the ZnO HS/CdS/CdSe cell achieved a PCE of 5.36 % due to the modification of ZnO HS nanostructure, the enhanced absorption in the visible region, the lower recombination reaction and higher electron lifetime.     

CdSe/Cd1−x Zn x S core/shell quantum dots with tunable emission: growth and morphology evolution

We demonstrate an organic synthesis to fabricate hydrophobic core/shell CdSe/Cd_1?x Zn _x S quantum dots (QDs) with tunable photoluminescence (PL) between green and red at relatively low temperature using trioctylphosphine S reacted directly with cadmium and zinc acetate. A seeded growth strategy was used for preparing large CdSe cores. Large CdSe cores revealed a rod-like morphology while small one exhibited a spherical shape. Being coated with a Cd_1?x Zn _x S shell on spherical CdSe cores with an average size of 3.9 nm in diameter, core/shell QDs exhibited a cubic morphology (a length of 5 nm). In contrast, the core/shell QDs created using a small core (3.3 nm in diameter) show a spherical morphology. Namely, the anisotropic aggregation behavior of CdS monomers on CdSe cores occurs when the rod-like core is coated with a Cd_1?x Zn _x S shell. CdS interlayer plays an important role for such morphology evolution because all CdSe cores with a pure ZnS shell exhibited a spherical morphology. The PL properties of CdSe/Cd_1?x Zn _x S core/shell QDs depended strongly on the size and morphology of the cores. The QDs revealed a narrow and tunable PL spectrum. It is believed that this facile strategy can be extended to synthesize other core–shell QDs at low temperature.     

Enhanced photovoltaic performance of solar cell based on front-side illuminated CdSe/CdS double-sensitized TiO2 nanotube arrays electrode

Free-standing TiO₂ nanotube (NT) arrays have been prepared by a two-step anodization method. These translucent TiO₂ NT arrays can be transferred to the fluorine-doped tin oxide glass substrates to form front-side illuminated TiO₂ NT electrodes. The TiO₂ NT electrodes were double-sensitized by CdSe/CdS quantum dots (QDs) through successive ionic layer adsorption and reaction (SILAR) process. The absorption range of the TiO₂ NT electrode was extended from ~380 to 700 nm after sensitization with CdSe/CdS QDs. The SILAR cycles were investigated to find out the best combination of CdS and CdSe QDs for photovoltaic performance. The power conversion efficiency of 2.42 % was achieved by the CdSe(10)/CdS(8)/TiO₂ NT solar cell. A further improved efficiency of 2.57 % was obtained with two cycles of ZnS overlayer on the CdSe(10)/CdS(8)/TiO₂ NT electrode, which is 45.19 % higher than that of back-side illuminated solar cell. Furthermore, the ZnS(2)/CdSe(10)/CdS(8)/TiO₂ NT solar cell possesses a higher stability than CdSe(10)/CdS(8)/TiO₂ NT solar cell during the same period. The better photovoltaic performance of the ZnS(2)/CdSe(10)/CdS(8)/TiO₂ NT solar cell has demonstrated the promising value to design quantum dots-sensitized solar cells with double-sensitized front-side illuminated TiO₂ NT arrays strategy.     

水相中CdSe与核/壳CdSe/CdS量子点的制备与发光特性研究

以巯基乙酸为稳定剂在水相中制备了CdSe与核/壳型CdSe/CdS量子点水溶胶, 用紫外-可见吸收光谱和发射光谱研究了它们的发光特性, 并且用X射线粉末衍射(XRD)、透射电镜(TEM)和X射线光电子能谱(XPS)表征了它们的结构、形貌和化学组成, 结果表明使用该方法制备的量子点分散性良好, 而且用CdS对CdSe进行表面修饰以后的发光强度明显提高, 发射光谱和吸收光谱都有红移现象, 不同粒径颗粒的吸收峰的位置也有所不同.     

Chemical substitution of Cd ions by Hg in CdSe nanorods and nanodots: Spectroscopic and structural examination

The chemical substitution of cadmium by mercury in colloidal CdSe quantum dots (QDs) and nanorods has been examined by absorption, photoluminescence and Raman spectroscopy. The crystalline structure of original CdSe QDs used for Cd/Hg substitution (zinc blende versus wurtzite) shows a strong impact on the optical and structural properties of resultant Cd_xHg_1−xSe nanocrystals. Substitution of Cd by Hg in isostructural zinc blende CdSe QDs converts them to ternary Cd_xHg_1−xSe zinc blende nanocrystals with significant NIR emission. Whereas, the wurtzite CdSe QDs transformed first to ternary nanocrystals with almost no emission followed by slow structural reorganization to a NIR-emitting zinc blende Cd_xHg_1−xSe QDs. CdSe nanorods with intrinsic wurtzite structure show unexpectedly intense NIR emission even at early Cd/Hg substitution stage with PL active zinc blende Cd_xHg_1−xSe regions.     

巯基包覆CdSe和CdSe/CdS核壳纳米晶的水相合成与表征

利用水相合成的方法制备了巯基包覆的具有较高荧光量子产率的CdSe和CdSe／CdS纳米晶．水相合成方法的优点是原料低廉、安全可靠和重复性高，缺点是纳米晶的尺寸分布较宽，发光效率不是很高．采用X-射线粉末衍射、吸收和荧光等光谱手段对纳米晶的平均尺度、粒径分布、晶体结构及发光特性进行了表征。在77K到300K的温度范围内，随着温度降低，CdSe纳米晶的发光峰逐渐蓝移，而CdSe／Cds纳米晶发光峰位基本不随温度变化而变化．此外，在325nm激光辐照下，CdSe／CdS纳米晶的荧光寿命比CdSe纳米晶延长了6倍左右，稳定性大幅度提高．以上结果表明，核壳结构的CdSe／CdS纳米晶具有较高的发光效率和良好的稳定性，具有广阔的应用前景．     

Size tuning of MAA capped CdSe and CdSe/CdS quantum dots and their stability in different pH environments

The present work reports synthesis of mercaptoacetic acid capped CdSe nanoparticles soluble in water at different temperatures and with different precursor ratios. This enabled to tune the particle size of QDs from 2.7 to 5.8 nm. The particles consist of nanocrystals; with mixed phase, hexagonal wurtzite as well as sphalerite cubic and are luminescent with quantum yield 10%. The quantum yield up to 20% has been obtained by growing a shell of CdS over the CdSe. HR-TEM images, XRD patterns and the photoluminescence excitation spectra shows epitaxial growth of CdS shell over CdSe and with average size 3.2 ± 1.2 and 4.7 ± 1.2 nm for CdSe and CdSe/CdS quantum dots respectively. FT-IR spectrum and the negative zeta potential value together confirms the attachment of mercaptoacetic acid to the QD surface, where the carboxylic acid group is facing towards solvent and provides stability due to electrostatic hindrance. Further, the QDs are checked for their stability and the luminescence in environments of different pH (4–11 pH). Both CdSe and CdSe/CdS agglomerate with total elimination of fluorescence for 4 pH medium, and no shift in the fluorescence emission peak observed for the 6–9 pH, therefore QDs can be applicable as the fluorescence tags in this specific range of pH.     

Study on the photoluminescence character of water-soluble CdSe nanocrystals under ambient conditions

Water soluble, thioglycolic acid (TGA) modified CdSe nanocrystals (NCs) have been prepared in aqueous media by the reaction between Cd2+ and NaHSe. Although initially these quantum dots (QDs) display photoluminescence (PL) with very low quantum yields (QY), upon prolonged exposure to ambient light, a strong PL enhancement by illumination is observed which leads to water soluble QDs with high luminescence. This result may have important application potential in biological or other fields. The primary reason for the luminescence enhancement is concluded to be the incorporation of sulfide ions from TGA into the lattice of CdSe NCs and the subsequent formation of alloy structures. Moreover, the CdSe/CdS core-shell structured QDs synthesized in aqueous solutions also consolidate this conclusion.     

Fabrication of quantum dot-sensitized solar cells with multilayer TiO2/PbS(X)/CdS/CdSe/ZnS/SiO2 photoanode and optimization of the PbS nanocrystalline layer

In this work, two multilayer photoanode structures of TiO₂/PbS(X)/CdS/ZnS/SiO₂ and TiO₂/PbS(X)/CdS/CdSe/ZnS/SiO₂ were fabricated and applied in quantum dot-sensitized solar cells (QDSCs). Then, the effect of PbS QDs layer on the photovoltaic performance of corresponding cells was investigated. The sensitization was carried out by PbS and CdS QDs layers deposited on TiO₂ scaffold through successive ionic layer adsorption and reaction (SILAR) method. The CdSe QDs film was also formed by a fast, modified chemical bath deposition (CBD) approach. Two passivating ZnS and SiO₂ layers were finally deposited by SILAR and CBD methods, respectively. It was shown that the reference cell with TiO₂/CdS/ZnS/SiO₂ photoanode demonstrated a power conversion efficiency (PCE) of 3.0%. This efficiency was increased to 4.0% for the QDSC with TiO₂/PbS(2)/CdS/ZnS/SiO₂ photoelectrode. This was due to the co-absorption of incident light by low-bandgap PbS nanocrystalline film and also the CdS QDs layer and well transport of the charge carriers. For the CdSe included QDSCs, the PbS-free reference cell represented a PCE of 4.1%. This efficiency was improved to 5.1% for the optimized cell with TiO₂/PbS(2)/CdS/CdSe/ZnS/SiO₂ photoelectrode. The maximized efficiency was enhanced about 25% and 70% compared to the PbS-free reference cells with and without the CdSe QDs layer.

     

High color rendering index white LED based on nano-YAG:Ce3+ phosphor hybrid with CdSe/CdS/ZnS core/shell/shell quantum dots

To improve the poor color rendering index (CRI) of YAG:Ce-based white light-emitting diode (LED) due to the lack of red spectral component, core/shell/shell CdSe/CdS/ZnS quantum dots (QDs) were synthesized and blended into nano-YAG:Ce³⁺ phosphors. Prominent spectral evolution has been achieved by increasing the content of QDs. A white LED combining a blue LED with the blends of nano-YAG phosphors and orange- and red-emission QDs with a weight ratio of 1:1:1 was obtained. This kind of white LED showed excellent white light with luminescent efficiency, color coordinates, CRI and correlated color temperature (CCT) of 82.5?lm/W, (0.3264, 0.3255), 91 and 4580?K, respectively.     

TiO2 inverse opal based CdS/CdSe quantum dot co-sensitized solar cells

CdS and CdSe quantum dots were introduced as co-sensitizers into TiO₂ inverse opal quantum dot sensitized solar cells. Herein, the three-dimensionally ordered porous TiO₂ inverse opal film leads to a better infiltration of both sensitizers and hole transporting material, and the smaller surface area of TiO₂ inverse opal film is effectively offset by the incorporating of co-sensitization. It was found that the presence of CdS/CdSe co-sensitizers provides enhanced light absorption, and leads to a lower recombination rate of the electrons due to the stepwise structure of band edge in TiO₂/CdS/CdSe, which resulted in the observed enhanced photocurrent and energy conversion efficiency of the solar cells. A cell efficiency of 1.01 % has been attained.     

Encapsulation of CdSe/ZnS nanocrystals within mesoporous silica spheres

Quantum dots (QDs) have attracted much attention on account of their unique optical and electronic properties. Applications of QDs in biological systems face challenges owing to their toxicity and hydrophobicity. Incorporation of QDs in mesoporous silica spheres affords not only hydrophilic shell for QDs in order to enhance their dispersion in aqueous medium, but also offers chemically inert shielding to reduce QD cytotoxicity. In the current work, two types of mesoporous silica encapsulated QDs were synthesized by rationally adjusting the reaction conditions. Mesoporous silica coated single CdSe/ZnS nanoparticles (sCdSe/ZnS@mSiO₂) were prepared through the one-pot reaction. Further modification of this reaction offered hollow mesoporous silica spheres (CdSe/ZnS@HMSS) encapsulating multiple CdSe/ZnS QDs assembled on the internal surface of the spheres. Both of sCdSe/ZnS@mSiO₂ and CdSe/ZnS@HMSS show significant photophysical properties. Possible formation mechanism of the two types of nanostructures was investigated and discussed.     

Absorption Enhancement in “Giant” Core/Alloyed‐Shell Quantum Dots for Luminescent Solar Concentrator

Luminescent solar concentrators (LSCs) can potentially reduce the cost of solar cells by decreasing the photoactive area of the device and boosting the photoconversion efficiency (PCE). This study demonstrates the application of “giant” CdSe/Cd_xPb_1–xS core/shell quantum dots (QDs) as light harvesters in high performance LSCs with over 1.15% PCE. Pb addition is critical to maximize PCE. First, this study synthesizes “giant” CdSe/Cd_xPb_1–xS QDs with high quantum yield (40%), narrow size distribution (<10%), and stable photoluminescence in a wide temperature range (100–300 K). Subsequently these thick alloyed‐shell QDs are embedded in a polymer matrix, resulting in a highly transparent composite with absorption spectrum covering the range 300–600 nm, and are applied as active material for prototype LSCs. The latter exhibits a 15% enhancement in efficiency with respect to 1% PCE of the pure‐CdS‐shelled QDs. This study attributes this increase to the contribution of Pb doping. The results demonstrate a straightforward approach to enhance light absorption in “giant” QDs by metal doping, indicating a promising route to broaden the absorption spectrum and increase the efficiency of LSCs.     

Surfactant-dependent photoluminescence of CdTe/CdS nanocrystals

ABSTRACT

The photoluminescence of aqueously synthesised core/shell CdTe/CdS quantum dots (QDs) was investigated. Two molar ratios (2.4 and 1.3) of thioglycolic acid (TGA) to Cd²⁺ were compared to determine the best synthesis conditions for high photoluminescent quantum yield (PLQY) and photostability. A difference in the PLQY of the CdTe/CdS QDs was observed when CdS shells were grown with different TGA/Cd²⁺ ratios. The difference in the observed PLQY was attributed to the quality of the passivation of the CdTe during the CdS shell growth. At TGA/Cd²⁺ ratio of 1.3, the CdS shell forms through homogeneous nucleation, which is limited by diffusion of growth material from the solution onto the QDs surface. Due to the lattice mismatch of CdTe and CdS, the core will experience coherence strain resulting in dislocation sites and surface defects between nucleation sites which can result in non-radiative trap states. When the TGA/Cd²⁺ ratio is 2.0, the CdS shell grows epitaxially, minimising the number of surface trap states. Finally, we observed that the fluorescence intermittency was supressed for CdTe QDs after UV light illumination, attributed to annealing of deep surface trap states by UV light.     

Tuning photocurrent response through size control of CdSe quantum dots sensitized solar cells

The photovoltaic characterization of CdSe quantum dots sensitized solar cells (QDSSCs) by tuning band gap of CdSe quantum dots (QDs) through size control has been investigated. Fluorine doped tin oxide (FTO) substrates were coated with 20 nm in diameter TiO₂ nanoparticles (NPs). Pre-synthesized colloidal CdSe quantum dots of different sizes (from 4.0 to 5.4 nm) were deposited on the TiO₂-coated substrates using direct adsorption (DA) method. The FTO counter electrodes were coated with platinum, while the electrolyte containing I^?/I ₃ ^? redox species was sandwiched between the two electrodes. The current density-voltage (J-V) characteristic curves of the assembled QDSSCs were measured for different dipping times, and AM 1.5 simulated sunlight. The maximum values of short circuit current density (J_sc) and conversion efficiency (η) are 1.62 mA/cm² and 0.29 % respectively, corresponding to CdSe QDs of size 4.52 nm (542 nm absorption edge) and of 6 h dipping time. The variation of the CdSe QDs size mainly tunes the alignment of the conduction band minimum of CdSe with respect to that of TiO₂ surface. Furthermore, the J_sc increases linearly with increasing intensity of the sun light, which indicates the sensitivity of the assembled cells.     

Synthesis and size dependent optical studies in CdSe quantum dots via inverse micelle technique

Cadmium selenide quantum dots (CdSe QDs) were successfully synthesized without using trioctylphosphine (TOP). The XRD pattern showed zinc-blend phase of the CdSe QDs. The absorption and PL spectra exhibit a strong blue shift as the QDs size decreases due to the quantum confinement effect. In addition, the quantum efficiency of CdSe QDs with TOP capping is higher than CdSe QDs with oleic acid capping. TEM image shows a spherical shape, compact and dense structure of CdSe QDs. A good agreement between the Tauc's model and experimentally measured absorption spectra of CdSe QDs is achieved. The FTIR peak at ～1712 cm^?1 spectra confirms the influence of oleic acid as a capping agent.     

Highly luminescent CdSe/ZnSe core-shell quantum dots of one-pot preparation in octadecene

CdSe/ZnSe core-shell quantum dots were synthesized using a new one-pot procedure where the core was prepared in octadecene. A ZnSe shell around a CdSe nanoparticle was formed by the reaction of selenium-richness on the surfaces of CdSe nanoparticles with Zn2+ from the injected zinc stearate precursor. The optical properties, luminescence kinetics, and the effect of shell thickness of as-prepared QDs were studied, which verifies the high quality of the resulting QDs. The new approach is effective not only for preparing core/shell QDs, but also for reducing the complexity of synthesis, toxicity, and reagent cost.     

Efficient quasi-stationary charge transfer from quantum dots to acceptors physically-adsorbed in the ligand monolayer

Alkanoate-coated CdSe/CdS core/shell quantum dots(QDs)with near-unity photoluminescence(PL)quantum yield and monoexponential PL decay dynamics are applied for studying quasi-stationary charge transfer from photo-excited QDs to quinone derivatives physically-adsorbed within the ligand monolayer of a QD.Though PL quenching efficiency due to electron transfer can be up to>80%,transient PL and transient absorption spectra reveal that the charge transfer rate ranges from single-digit nanoseconds to sub-nanoseconds,which is~3 orders of magnitude slower than that of static charge transfer and?2 orders of magnitude faster than that of collisional charge transfer.The physically-adsorbed acceptors can slowly(500-1,000 min dependent on the size of the quinone derivatives)desorb from the ligand monolayer after removal of the free acceptors.Contrary to collisional charge transfer,the efficiency of quasi-stationary charge transfer increases as the ligand length increases by providing additional adsorption compartments in the elongated hydrocarbon chain region.Because ligand monolayer commonly exists for a typical colloidal nanocrystal,the quasi-stationary charge transfer uncovered here would likely play an important role when colloidal nanocrystals are involved in photocatalysis,photovoltaic devices,and other applications related to photo-excitation.     

CdSe/CdS core/shell quantum dots as sensitizer of a photorefractive polymer composite

Abstract

CdSe/CdS core/shell, tri-n-octylphosphine oxide passivated, quantum dots are used to sensitize a photorefractive polymer composite. The composite also consists of poly(N-vinylcarbazole) as the nominally charge transporting matrix and an electro-optic chromophore. The efficacy of sensitization and consequent photorefractive performance is investigated using transmission spectroscopy and ellipsometry, two-beam coupling and degenerate four-wave mixing experiments. The photorefractive nature of the photo-induced grating is confirmed by the observation of asymmetric two-beam coupling. Four-wave mixing reveals record diffraction efficiencies for a nano-particle-sensitized photorefractive polymer at the field levels applied (1.3% at 70 V.μm^?1). A recently developed analytical technique is used to extract space-charge field rise time values from degenerate four-wave mixing transients. In turn, analysis of the dependence of the rise time on applied field is used to determine the zero-field charge dissociation efficiency to be 3.6 × 10^?5 ± 0.5 × 10^?5. It is further shown that the magnitude of this parameter accounts for most of the difference in photorefractive response rate between the present material and a similar C₆₀ sensitized composite.     

Effect of shell layers on luminescence of colloidal CdSe/Zn(0.5)Cd(0.5)Se/ZnSe/ZnS core/multishell quantum dots

Colloidal CdSe/Zn(0.5)Cd(0.5)Se/ZnSe/ZnS core/multishell quantum dots (QDs) were synthesized by using the well developed successive ion layer adsorption and reaction (SILAR) technique. The UV-vis and PL spectra, TEM, X-ray diffraction and Raman measurement were performed to investigate the structure and optical properties of prepared QDs during the growth of shell layers, which indicated that the stress in CdSe core became stronger with the increasing shell thickness. Due to the gradual adjustment of the lattice parameters in the radial direction and the radial increase of the respective valence- and conduction-band offsets, the optical measurements show a significant enhancement in the photoluminescence quantum yield (QY) and an expedited radiative decay in QDs overcoated with thicker shell. The temperature-dependent optical spectra were measured, and the relation between the microstructure and the optical properties of these core/multishell quantum dots was discussed.