Pool boiling on the superhydrophilic surface with TiO_2 nanotube arrays

Surface with TiO2 nanotube arrays(TNTAs)is superhydrophilic and of great specific area.This paper investigates the pool boiling characteristics at the thermal interface with TNTAs.The results show that the TNTAs interface can enhance the pool boiling heat transfer compared to the pure Ti metal plate.The bubbles formed at the initial nucleation state are very small and released in higher frequency.The pool boiling heat transfer enhancement at the TNTAs interface may be attributed to the high density of nucle...     

The film-forming behavior on the interface between air and hydrosol of Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticles

The film forming behavior on the interface between air and hydrosol of Fe₂O₃ nanoparticles was investigated by the surface pressure-time isotherms, the surface pressure-trough area isotherms, Brewster angle microscopy and transmission electron microscopy. It is found that the freshly prepared hydrosol of Fe₂O₃ nanoparticles is not stable. The surface pressure increases with the aging time and finally approaches a constant, and the smaller the concentration is, the smaller the surface pressure is stabilized at and the shorter the time the hydrosol reaching stable needs. The surface pressure also increases with compression until collapsed, and the longer the hydrosol is aged, the higher the collapsing pressure is. A uniform and compact film composed of nanoparticles with an average diameter of about 2–3 nm on the air-hydrosol interface is observed by Brewster angle microscope and transmission electron microscope. Funded by the National Natural Science Foundation of China (50672089), the Encouraging Foundation for the Scientific Research of the Excellent Young and Middleaged Scientists in Shandong Province(2006BS04034)     

Nanocomposite films of V<Subscript>2</Subscript>O<Subscript>5</Subscript>−MoO<Subscript>3</Subscript> xerogel with poly ethylene oxide intercalation

Poly ethylene oxide (PEO)_x−V₂O₅−V₂O₅−MoO₃ (x=0, 0.5, 1) films were prepared by the sol-gel method. The synthesis and structure of the films were investigated by XRD, TG-DTA, FTIR, etc. The results show that V₂O₅−MoO₃ xerogel has a layered structure and its interlayer space increased from 1.3181 nm at x=0 to 1. 7898 nm at x=1 after the nanocomposite films were dried, and PEO in the interlayer changes the interface structure by forming hydrogen bonds with V=0 bands. CV measurement indicates that the intercalation of PEO improves insertion/extration properties of Li⁺ ions in the interlayer. ZHENG Jin-xia: Born in 1976 Funded by the National Natural Science Foundation of China (No. 50172036) and Natural Science Foundation of Hubei Province(No. 2001ABB083)     

Orientation of Bi<Subscript>3.2</Subscript>La<Subscript>0.8</Subscript>Ti<Subscript>3</Subscript>O<Subscript>12</Subscript> ferroelectric thin films with different annealing schedules

Fatigue-free Bi_3.2La_0.8Ti₃O₁₂ ferroelectric thin films were successfully prepared on p-Si (100) substrates using metalorganic solution deposition process. The orientation and formation of 5-layers thin films were studied under different processing conditions using XRD. Experimental results indicate that increase in annealing time at 700 °C after preannealing for 10 min at 400 °C can remarkably increase (200)-orientation of the films derived from the precursor solutions with two contents of citric acid. Meanwhile, high content of citric acid increases the film thickness and is conducive to the a-orientation of the films with the preannealing, and low concentration of the solution is conducive to the c-orientation of the films without the preannealing.     

High-temperature oxidation behavior of Al<Subscript>2</Subscript>O<Subscript>3</Subscript>/TiAl matrix composite in air

The oxidation behavior of Al₂O₃/TiAl in situ composites fabricated by hot-pressing technology was investigated at 900° in static air. The results indicate that the mass gains of the composites samples decrease gradually with increasing Nb₂O₅ content and the inert Al₂O₃ dispersoids effectively increase the oxidation resistance of the composites. The higher the Al₂O₃ dispersoids content, the more pronounced the effect. The primary oxidation precesses obey approximately the linear laws, and the cyclic oxidation precesses follow the parabolic laws. The oxidized sample containing Ti₂AlN and TiAl phases in the scales exhibits excellent oxidation resistance. The oxide scale formed after exposure at 900°C for 120 h is multiple-layered, consisting mainly of an outer TiO₂ layer, an intermediate Al₂O₃ layer, and an inner TiO₂+Al₂O₃ mixed layer. From the outer layer to the inner layer, TiO₂+Al₂O₃ mixed layer presents the transit of Al-rich oxide to Ti-rich oxide mixed layer. Near the substrate, cross-section micrograph shows a relatively loose layer, and micro- and macro-pores remain on this layer, which is a transition layer and transferres from Al₂O₃+TiO₂ scale to substrate. The thickness of oxide layer is about 20 μm. It is also found that continuous protective alumina scales can not be observed on the surface of oxidation scales. Ti ions diffuse outwardly to form the outer TiO₂ layer, while oxygen ions transport inwardly to form the inner TiO₂+Al₂O₃ mixed layer. Under long-time intensive oxidation exposure, the internal Al₂O₃ scale has a good adhesiveness with the outer TiO₂ scale. No obvious spallation of the oxide scales occurs. The increased oxidation resistance by the presence of in situ Al₂O₃ particulates is attributed to the enhanced alumina-forming tendency and thin and dense scale formation. Al₂O₃ particulates enhance the potential barrier of Ti ions from M/MO interface to O/MO interface, thereby the TiO₂ growth rate decreases, which is also beneficial to improve the oxidation resistance. Moreover, the multi-structure of the TiO₂+Al₂O₃ mixed layer decreases the indiffusion of oxygen ions and also avails to improve the high temperature oxidation resistance of the as-sintered composites. Supported by the Special Program for Education Bureau of Shaanxi Province, China (Grant No. 08JK240) and Scientific Research Startup Program for Introduced Talents of Shaanxi University of Technology, China (Grant No. SLGQD0751)     

Manufacture Process of 8Y2O3 Stabilized ZrO2 from Nano Powders

The manufacture process of 8 mol% Y2O3 stabilized ZrO2 ( YSZ ) from nano powders, including the forming and sintering stages, was studied. During the forming process of YSZ powders, the relative density of YSZ increases lineally with the forming press, and the sintering linear shrinkage of YSZ to the forming press compiles to the parabola trend. When the forming press exceeding 500MPa, the samples with lower shrinkage and high density were obtained. The sintering temperature of YSZ decreases greatly because of the small size and high active surface of YSZ powders. As a result, the beginning sintering temperature of YSZ made in the experiment is as low as 825℃, and the end sintering temperature is 1300-1350℃ . The relative density of YSZ ceramic by solid sintering at 1300-1350℃ is more than 97% , with little and small pores in the uniform microstructure.     

Fabrication and photocatalytic activity of Ag<Subscript>3</Subscript>PO<Subscript>4</Subscript>-TiO<Subscript>2</Subscript> heterostructural nanotube arrays

To extend the absorption capability of TiO₂ into visible light region and inhibit the recombination of photogenerated electrons and holes, we put forward an effective strategy of the coupling of TiO₂ with a suitable semiconductor that possesses a narrow band gap. Meanwhile, Ag₃PO₄-TiO₂ heterostructural nanotube arrays were prepared by the two-step anodic oxidation to obtain the TiO₂ nanotube arrays and then by a deposition-precipitation method to load Ag₃PO₄. The samples were characterized by field emission scanning electron microscopy (FESEM), energy dispersive spectrometry (EDS), X-ray diffraction (XRD), and UV-vis diffuse reflectance spectroscopy (UV-vis DRS). The experimental results showed that Ag₃PO₄ nanoparticles were uniformly dispersed on the highly ordered TiO₂ nanotube arrays, which increased the visible-light absorption of TiO₂ photocatalyst. The photocurrent density and photocatalytic degradation of methyl orange indicated that the performance of Ag₃PO₄-TiO₂ heterostructural nanotube arrays was better than that of the TiO₂ nanotube arrays, which could be attributed to the effective electron-hole separation and the improved utilization of visible light.     

Synthesis and characterization of a new Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> pillared triple-layered perovskite KSr<Subscript>2</Subscript>Nb<Subscript>3</Subscript>O<Subscript>10</Subscript>

A n-Hexyl NH₃Sr₂Nb₃O₁₀ is obtained by the stepwise ion-exchange reaction, then is dispersed in aqueous solution of trinuclear acetato-hydroxo iron (III) nitrate, [Fe₃(OCOCH₃)₇OH·2H₂O]NO₃, and the interlayer potassium cations of the perovskite niobate are exchanged with the partially hydrolyzed trinuclear acetato complex ions. On heating, the exchanged complex ions are converted into iron oxide pillars which keep the perovskite sheets apart. The product is characterized by XRD, SEM, EDAX and surface area measurement respectively. Zhang Hui: Born in 1970 Funded by the National Natural Science Foundation of China (No. 50002007), Major Program of Ministry of Education (No. 0201) and Open Foundation of State Key Lab of Advanced Tech. for Materials Synthesis and Processing.     

Self-Propagating High-Temperature Reduetive Synthesis of TiB2-Al2O3 Composite Powders

TiB2-Al2O3 composite powders were produced by self-propagating high-temperature synthesis（SHS） method with reductive process from B2O3-TiO2-AI system. X-ray diffraction（XRD） and scanning electron microscopy（SEM） analyses show the presence of TiB2 and Al2O3 only in the composite powders produced by SHS. The powders are uniform and free-agglomerate. Transmission electron microscopy （TEM） and high resolution electron microscopy （HREM） observation of microstructure of the composite powders indicate that the interfaces of the TiB2-Al2O3 bond well, without any interfacial reaction products. It is proposed that the good interfacial bonding of the composite powders can be resulted from the TiB2 particles crystallizing and growing on the Al2O3 particles surface with surface defects acting as nucleation centers.     

Synthesis and electrochemical properties of Cr-doped Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript> cathode materials for lithium-ion batteries

Cr-doped Li₃V₂(PO₄)₃ cathode materials Li₃V_2−x Cr _x (PO₄)₃ were prepared by a carbothermal reduction(CTR) process. The properties of the Cr-doped Li₃V₂(PO₄)₃ were investigated by X-ray diffraction (XRD), scanning electron microscopic (SEM), and electrochemical measurements. Results show that the Cr-doped Li₃V₂(PO₄)₃ has the same monoclinic structure as the undoped Li₃V₂(PO₄)₃, and the particle size of Cr-doped Li₃V₂(PO₄)₃ is smaller than that of the undoped Li₃V₂(PO₄)₃ and the smallest particle size is only about 1 μm. The Cr-doped Li₃V₂(PO₄)₃ samples were investigated on the Li extraction/insertion performances through charge/discharge, cyclic voltammogram (CV), and electrochemical impedance spectra(EIS). The optimal doping content of Cr was that x=0.04 in the Li₃V_2−x Cr _x (PO₄)₃ samples to achieve high discharge capacity and good cyclic stability. The electrode reaction reversibility was enhanced, and the charge transfer resistance was decreased through the Cr-doping. The improved electrochemical performances of the Cr-doped Li₃V₂(PO₄)₃ cathode materials are attributed to the addition of Cr³⁺ ion by stabilizing the monoclinic structure. Funded by the Guangxi Natural Science Foundation(No. 0832259) and the National Basic Research Program of China (No. 2007CB613607)     

添加剂对乙二醇水溶液沸腾传热的研究

选择乙二醇-水、乙二醇-乙醇-水为工质，研究了加入不同种类和浓度添加剂(表面活性剂)后，上述混合物池式沸腾传热特性.试验结果表明：某些表面活性剂能明显强化乙二醇-水、乙二醇-乙醇-水溶液池式沸腾传热，其最佳添加浓度为(5.2～6.9)×10^-4 mol/L.同时对添加剂能强化乙二醇-水、乙二醇-乙醇-水溶液沸腾传热机理进行了探讨.强调表面活性物质主要通过降低溶液表面张力，降低固液界面的润湿性，增加固液接触面，增加汽化核心数等来强化上述混合物的沸腾传热.     

Nonselective etching of GaN/AlGaN heterostructures by Cl<Subscript>2</Subscript>/Ar/BCl<Subscript>3</Subscript> inductively coupled plasmas

A systematic study of the nonselective and smooth etching of GaN/AlGaN heterostructures was performed using Cl₂/Ar/BCl₃ inductively coupled plasmas (ICP). Nonselective etching can be realized by adjusting the BCl₃ ratio in the Cl₂/Ar/BCl₃ mixture (20%–60%), increasing the ICP power and dc bias, and decreasing the chamber pressure. Surface morphology of the etched heterostructures strongly depends on the gas chemistry and the chamber pressure. Specifically, with the addition of 20% BCl₃ to Cl₂/Ar (4∶1) gas mixture, nonselective etching of GaN/Al_0.28Ga_0.72N heterostructures at high etch rate is maintained and the surface root-mean-square (rms) roughness is reduced from 10.622 to 0.495 nm, which is smoother than the as-grown sample. Auger electron spectroscopy (AES) analysis shows that the effective removal of residual oxygen from the surface of AlGaN during the etching process is crucial to the nonselective and smooth etching of GaN/AlGaN herterostructures at high etch rate.     

Fabrication and magnetic properties of Sm3(Fe,Ti)29Nx/α-Fe dual-phase nanocomposite permanent magnetic material

Sm3(Fe,Ti)29Nx/α-Fe dual-phase nanometer magnetic material was fabricated through rapid solidification, crystallization and nitridation of Sm-Fe (Ti) alloy. The effect of combination of rapid solidification and Ti alloy addition on the phase formation and microstructure of the Sm-Fe alloy is investigated in this paper. The microstructure of amorphous phase and dual-phase nano-grain crystals before and after crystallization annealing were observed using a high-resolution transmission electron microscope (HREM). The dual-phase nano-grains after annealing were compacted together with a clear interface with the direct exchange-coupling mechanism. Different annealing processes were used to examine the melt-spun alloy. Comparison of the images of SEM showed that annealing at 750℃ for 10 min was most suitable to get homogeneous and nano-grains. No obvious kink was detected in the second quadrant of the hysteresis loop like a single hard magnet, and strong exchange coupling was found between hard magnets and soft magnets.     

管外及窄环隙流道池沸腾换热对比实验分析

在常压下以水为工质，对管外及窄环隙流道池沸腾换热进行了实验与观察，研究热负荷和加热面方位对核态沸腾换热性能的影响．结果发现：竖直加热面位置对沸腾换热有显著影响，其中对于管外沸腾主要在低负荷区产生影响，而对于环隙流道则在达到临界热负荷之前一直有明显的影响，倾斜使光管沸腾换热减弱，但对环隙流道没有显著的影响．不同的数据处理方法有时会使实验结果产生差异.     

池核沸腾传热强化及阻垢研究

通过池沸腾实验,利用自动数据采集系统考察了CaCO3的生成对饱和池核沸腾传热的影响,并考察添加剂和超疏水表面对池核沸腾传热的影响。选用W/O型聚丙烯酰胺(简称PAM)为添加剂,研究了添加剂水溶液的性质、添加剂浓度、热通量等因素对池核沸腾传热的影响,并对CaCO3的形成影响池核沸腾传热过程进行了机理分析,并以表面核化中心与污垢沉积及生长相互影响的观点对实验结果进行了解释。本实验通过动态模拟研究结果表明,W/O型聚丙烯酰胺具有强化池核沸腾传热的性能,PAM可降低气泡的脱离直径,增加气泡的脱离频率,提高传热系数,而且有最佳浓度范围;同时还表明经过超疏水处理后的加热器表面具有良好的抗垢性能,在稳定阶段,处理后的表面的传热系数高于未处理表面上的传热系数。     

Synthesis and characterization of (PEO)<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>−(V<Subscript>0.85</Subscript>Mo<Subscript>0.15</Subscript>)<Subscript>2</Subscript>O<Subscript>5</Subscript> nanocomposite films

(PEO) _x −(V_0.85Mo_0.15)₂O₅(x=0,0.5,1.0) nanocomposite films were prepared by a modified sol-gel method. The structure of the films was analyzed by XRD, and the DC electrical conductivity. Cyclic voltammogram and optical spectral transmittance were investigated. The results show that the (V_0.85Mo_0.15)₂O₅ xerogel has a layered structure and its interlayer space increased from 1.3181 nm at x=0 to 1.7897 nm at x=1.0. The introduction of MoO₃ improved the DC electrical conductivities of the films due to the generation of V₄₊ to maintain the electrical neutrality of the oxides. PEO intercalated in the interlayer of (V_0.85Mo_0.15)₂O₅ oxides has interaction with the oxides, enhancing the amount of Li⁺ ions inserted into the interlayer of the oxides. Moreover, the intercalation of PEO into the interlayer of (V_0.85Mo_0.15)₂O₅ oxides improved the cathodic electrochromic property in near ultraviolet region and anodic electrochromic property in visible range. JIANG Cong-sheng: Born in 1963 Supported by the Science Foundation of Hubei Province (Grant No. 2001ABB083)     

电场极性对池沸腾换热影响的机理

对电场极性影响池沸腾换热的机理进行了理论分析和实验研究。在实验中,换热面为一平板并接地作为0电极,高压电极为平行于换热面的线状电极。实验结果表明,正电压下的强化换热效果优于负电压下的强化换热效果。这是由于施加正电压时不会有阴极发射电子现象,而施加负电压会有阴极发射电子现象,阴极发射电子削弱了电场对沸腾换热的作用。     

Research and application of CO<Subscript>2</Subscript> refrigeration and heat pump cycle

The environmental problem caused by refrigerant has become the focus all over the world. As the most typical natural refrigerant, CO₂, of course, becomes the research focus. This paper introduces the development and application status of CO₂ refrigeration and heat pump technology. The researches on CO₂ refrigeration and heat pump, carried out by Thermal Energy Research Institute, Tianjin University, also are presented in this paper. Supported by the National Natural Science Foundation of China (Grant Nos. 50676064, 50506019) and the National Hi-Tech Research and Development Program of China (“863” Project) (Grant No. 2007AA05Z262)     

Dielectric Properties of B2O3 Doped MgTiO3-CaTiO3 System Ceramics

The dielectric ceramics with a main crystal phase of MGTiO3 and additional crystal phase of CaTiO3 were prepared by the conventional electronic ceramics technology .the strucures of MgTiO3 are ilmenitetype,and belong to hexagonal syngony.the ratio of MgTiO3 to Ca TiO3 doping on the dielectric properties of MGTiO3-CaTiO3(MCT)ceranics were inrestigated.the addition of B2O3 decreases the sintering temperatnre and results in rapid desification without obrious negative effect on the Q values of the system(Q=1/tan ).B2O3 exists as liquid phase in the sintering process,promoting the reactions as a singering agent.     

微圆柱阵微通道内沸腾换热及气泡运动特性研究

基于流体体积(VOF)模型对恒定热流密度下的微圆柱阵通道内的流动沸腾换热特性展开数值研究,并利用几何重构法捕捉气液两相界面迁移变化,研究了流道内流速的分布和微圆柱高度对气泡分布、沸腾换热性能及沸腾不稳定性的影响。结果表明:微圆柱的存在增加了气泡核化点密度;气泡运动增加了工质与加热壁面接触的可能性;微圆柱高度较低时,易发生气塞现象,加热面散热不均导致局部异常过热,换热性能下降;微圆柱阵通过阻碍气泡反向流动来降低沸腾不稳定性,但微圆柱高度过高会造成换热系统振荡,影响传热可靠性。