共查询到20条相似文献,搜索用时 171 毫秒
1.
2.
具有时变采样周期的网络控制系统的H∞控制 总被引:1,自引:0,他引:1
研究了具有时变采样周期的网络控制系统的H∞鲁棒控制器设计问题.提出了基于变采样周期的切换方法(采样周期在有限集合内切换),并利用该方法将存在时变采样周期、长时延以及丢包的网络控制系统建模为切换系统.在此基础上,通过把一个非凸的可行性问题转化为受线性矩阵不等式约束的多目标优化问题,研究了网络控制系统的H∞控制器设计方法.仿真结果验证了基于采样周期切换的H∞控制器设计方法的有效性. 相似文献
3.
4.
针对网络控制系统(NCS)的随机短时延问题,在传感器和执行器由时间驱动、离散控制器由事件驱动方式下,将NCS描述为切换系统模型。结合极点配置和特征根连续变化原理,根据时延与增广矩阵特征根最大模长之间的关系,将切换系统进行简化并设计相应的状态反馈控制器。实验结果表明,该控制器求解简单、易于实现,且可根据实际系统性能要求选择控制参数。 相似文献
5.
具有网络丢包和时延的网络控制系统设计 总被引:6,自引:0,他引:6
为了降低对于网络传输的要求,针对具有固定时延和随机丢包情况的网络系统,采用状态增广以克服时延对网络控制系统分析的影响,进而考虑随机丢包情况,将增广系统转化为切换系统.以此为基础,提出网络鲁棒控制器设计方法.该控制器仅仅基于被控对象的反馈状态,因此对于网络传输的要求较低.最后,通过一个仿真算例验证了该系统的有效性. 相似文献
6.
基于切换网络下带有随机时延和随机通讯噪声的多智能体系统模型,提出分布式多步近似次梯度随机投影算法,并对算法的收敛性进行分析.首先,利用网络扩维的方法将含随机时延的通讯网络转化为无时延网络;其次,提出近似次梯度概念,并设计多步近似次梯度随机批量投影算法,批量随机投影可以避免在实际问题中整体约束集合不易获得而导致投影算子不... 相似文献
7.
时延以及数据包丢失是导致网络控制系统性能降低的重要原因.利用既是时钟驱动又是事件驱动的传感器,可以使时延与采样周期具有相同的长度,这样降低了建模随机时延的保守性.通过把具有时变采样周期的网络控制系统建模为切换系统,并利用线性矩阵不等式,本文给出了保证系统渐进稳定的充分条件,同时设计了系统的H∞控制器,仿真结果表明了本文所提出的变采样周期方法的有效性. 相似文献
8.
在网络控制系统的优化中,研究了离散时间域内带随机时延的网络控制系统的镇定性优化问题.首先将随机时延建模为一个马尔可夫链,然后在网络控制系统中引入模态依赖的脉冲切换控制器,建立了采用脉冲切换控制的网络控制系统模型.利用系统模型随机稳定性理论推导,得到使网络控制系统稳定的充分必要条件,并用迭代线性矩阵不等式方法求解了控制器,最后利用小车倒立摆做被控对象进行了数值仿真,仿真结果说明了控制方法的有效性. 相似文献
9.
10.
存在时延和数据包丢失情况下状态反馈网络控制系统的指数稳定性 总被引:11,自引:1,他引:11
同时考虑网络诱导时延和数据包丢失以及传感器与控制器、控制器与执行器之间均存在网络的情况,研究了状态反馈网络控制系统的稳定性问题.基于一定的数据包丢失率和恒定时延,系统被建模为由结构事件率约束的异步动态切换系统.利用李亚普诺夫方法和线性矩阵不等式描述,推导出由数据包丢失率约束的系统指数稳定的充分条件,给出了系统指数稳定的容许数据丢包率和系统开环状态及闭环结构的关系,以使系统指数稳定.用Matlab LMI工具箱容易判定系统的指数稳定性,同时获得系统指数稳定的状态反馈控制律.Matlab仿真说明,分析方法是有效的,稳定判据是可行的. 相似文献
11.
12.
This paper investigates the synchronization problem of networked Lagrangian systems based on pinning control framework on complex networks. We propose a pinning algorithm to guarantee the controlled synchronization of networked identical Lagrangian systems by applying local linear feedback injections to a small fraction of nodes. We also present some simple yet generic criteria on pinning synchronization for such an algorithm over undirected connected graphs, where all the agents are regulated to follow a synchronization state. Furthermore, the pinning controllability in networked Lagrangian systems is also discussed. Compared with some existing works on networked Lagrangian systems, the distinctive advantages of the proposed pinning algorithm include: (i) independence on the knowledge of system models; (ii) explicit consideration of agent's intrinsic complex dynamics; and (iii) simplicity of implement procedure in practice. Subsequently, the results are illustrated by a typical Lagrangian network composing of eight two‐link revolute manipulators. Numerical simulations with different kinds of pinning schemes are finally given to demonstrate the effectiveness of the proposed control methodology. 相似文献
13.
14.
网络控制系统中的时戳预测函数控制 总被引:1,自引:0,他引:1
传统预测函数控制算法不能有效处理网络控制系统中的随机延迟,为此提出了时戳预测函数控制算法.该算法使用时间戳来估计由网络引入的控制延迟,在预测系统未来输出时明确考虑了该延迟,然后借鉴传统预测函数控制算法的基本策略,得到了适用于网络控制系统的控制规律.进一步由TrueT im e工具箱搭建了网络控制系统仿真平台,对比了时戳预测函数控制算法和传统预测函数控制算法.仿真结果表明随着网络引入延迟的增大,时戳预测函数控制算法给出控制品质明显优越于传统预测函数控制算法. 相似文献
15.
针对具有数据包丢失的网络化控制系统跟踪控制问题,提出一种非策略Q-学习方法,完全利用可测数据,在系统模型参数未知并且网络通信存在数据丢失的情况下,实现系统以近似最优的方式跟踪目标.首先,刻画具有数据包丢失的网络控制系统,提出线性离散网络控制系统跟踪控制问题;然后,设计一个Smith预测器补偿数据包丢失对网络控制系统性能的影响,构建具有数据包丢失补偿的网络控制系统最优跟踪控制问题;最后,融合动态规划和强化学习方法,提出一种非策略Q-学习算法.算法的优点是:不要求系统模型参数已知,利用网络控制系统可测数据,学习基于预测器状态反馈的最优跟踪控制策略;并且该算法能够保证基于Q-函数的迭代Bellman方程解的无偏性.通过仿真验证所提方法的有效性. 相似文献
16.
Networked model predictive control based on neighbourhood optimization for serially connected large-scale processes 总被引:1,自引:1,他引:1
In this paper, two novel networked model predictive control schemes based on neighbourhood optimization are presented for on-line optimization and control of a class of serially connected processes (known as the cascade processes in some references), in which the on-line optimization of the whole system is decomposed into that of several small-scale subsystems in distributed structures. Under network environment, the connectivity of the communication network is assumed to be sufficient for each subsystem to exchange information with its neighbour subsystems. An iterative algorithm for networked MPC and a networked MPC algorithm with one-step delay communication are developed according to different network capacities. The optimality of the iteration based networked MPC algorithm is analyzed and the nominal stability is derived for unconstrained distributed control systems. The nominal stability with one-step delay communication is employed for distributed control systems without the inequality constraints. Finally, an illustrative example and the simulation study of the fuel feed flow control for the walking beam reheating furnace are provided to test the effectiveness and practicality of the proposed networked MPC algorithms. 相似文献
17.
18.
网络化工业控制系统的研究进展 总被引:1,自引:0,他引:1
工业控制系统已跨入网络化控制的新阶段,网络化工业控制系统已成为制造业控制、过程控制和测控技术等领域中的重要研究方向.阐述了网络化工业控制系统设计和实现中的一些主要问题,包括:网络化工业控制系统的体系结构、时延问题、时钟同步、控制算法以及节点测控器等问题;提出了网络化工业控制系统进一步研究的一些问题. 相似文献
19.
Motivated by the widespread use of networked and embedded control systems, an algorithm for stability analysis is proposed for sampled-data feedback control systems with uncertainly time-varying sampling intervals. The algorithm is based on the robustness of related discrete-time systems against perturbation caused by the variation of sampling intervals. The validity of the algorithm is demonstrated by numerical examples. 相似文献