Gold nanoparticles/graphene oxide composite for electrochemical sensing of hydroxylamine and hydrogen peroxide

It has been discovered that the complex formed by cetyltrimethyl ammonium bromide (CTAB) and graphene oxide (GO) is highly stable in aqueous solution and adhesive to the glassy carbon electrode (GCE) surface in our previous research. In this work, the film of CTAB/GO complex was directly formed on GCE and gold nanoparticles were facilely incorporated into the matrix of CTAB/GO complex at the same time. Scanning electron microscopic (SEM) investigation shows that gold nanoparticles were distributed uniformly on the sheets of graphene. Cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and amperometry were used to investigate the electrochemical behaviors of AuNP/CTAB/GO. The obtained AuNP/CTAB/GO presents excellent catalytic capabilities towards the oxidation of hydroxylamine (HA) and the reduction of H₂O₂. The oxidation current of HA and the reduction current of H₂O₂ are linear with their concentrations in the range of 10～1000 μM and 1.0～5000 μM, respectively. The detection limits for HA and H₂O₂ are 3.5 μM and 0.67 μM, respectively. The mechanism of the oxidation of HA on AuNP/CTAB/GO modified GCE was also studied.     

Electrochemical determination of hydrazine based on polydopamine-reduced graphene oxide nanocomposite

In this work, a simple and mild procedure was employed to synthesize polydopamine-reduced graphene oxide (PDA-RGO) nanocomposites, where the sheets of graphene oxide were functionalized firstly with PDA through self-polymerization. FTIR was used to confirm that the GO sheets had been functionalized successfully with PDA and reduced. Besides, UV-Vis and X-ray diffraction spectroscopy were employed to further demonstrate the formation of RGO. The electrochemical property of the PDA-RGO has been studied by the determination of hydrazine. The results indicated that the electrochemical oxidation of hydrazine was significantly improved by the obtained PDA-RGO nanocomposite due to the increased available surface area of electrode. A quick amperometric response was observed with the electrochemical sensor based on PDA-RGO nanocomposite for the hydrazine measurement in a wide linear range of 0.03–100 μM, where the limit of the detection was 0.01 μM.     

A methyl parathion electrochemical sensor based on Nano-TiO2, graphene composite film modified electrode

A methyl parathion electrochemical sensor based on nano-TiO₂ and graphene composite film modified glassy carbon electrode has been developed. The electrochemical behavior of MP at the sensor was investigated by cyclic voltammetry and linear sweep voltammetry. Scanning electron microscopy was used to characterize the surface morphology of nano-TiO₂ and graphene composite film. Compared with a bare glassy carbon electrode or a mono-film modified electrode, the redox peak currents of methyl parathion on the composite film modified electrode improved greatly, indicating that the sensor showed good catalytic effects. The optimal experimental condition was obtained. The results indicated that the linear sweep voltammetry responses of methyl parathion, in pH 5.2 acetate buffer solution with open-circuit accumulation for 2 min, were linear with concentrations of methyl parathion in two ranges of 0.002～5 μM and 5～100 μM. The linear equations were i_Pc(μA) = 0.0136 + 4.965c_MP(μM) (R₁² = 0.9911) and i_Pc(μA) = 21.87 + 0.8206c_MP(μM) (R₂² = 0.9914), respectively. The detection limit was 1.0 nM (S/N = 3). The sensor exhibited high sensitivity and good reproducibility as well as certain anti-interference ability. It was applied to the determination of residual MP in fresh apple sample with the recovery of 92%～102%. The result was satisfactory.     

Superconducting Properties of the 3-K Phase of Sr2RuO4 near Hc2

The superconducting transition temperature, T _c , of the impurity-free, intrinsic Sr₂RuO₄ is as high as 1.50 K. However, we recently showed that T _c is remarkably increased up to 3 K in the Sr₂RuO₄–Ru eutectic system, in which plate-like microdomains of Ru metal are embedded in the primary-phase Sr₂RuO₄. The phase diagram of the anisotropic upper critical field of the 3-K phase indicates that H _c2 for the field parallel to the RuO₂ plane is strongly suppressed at low temperatures. We argue that the reorientation of the Cooper-pair spin direction near the Sr₂RuO₄–Ru interface may be responsible for this suppression. In addition, we observed unusual hysteresis in the out-of-plane resistivity, _c , at low temperatures and near H _c2, only when the field was applied parallel to the RuO₂ plane.     

Experimental Evidence for Spin-Triplet Superconductivity in Sr2RuO4

We review the experimental evidence for spin-triplet superconductivity in Sr₂RuO₄. The Knight shift experiments decisively demonstrated that the Cooper-pair symmetry is spin triplet. We discuss the most probable wave function of the Cooper pairs on the basis of the results of a number of key experiments. We point out that a simple picture of the unitary state with the isotropic gap is not compatible with the observed behavior of the specific heat, and that a profound modification of the pairing wave function is needed. We also present the in-plane angular dependence of the upper critical field, with the field applied exactly parallel to the quasi-two-dimensional plane. We discuss the possible implication of the observed fourfold anisotropy in connection with the proposed second superconducting state with a line-node gap.     

Effect of ZnO doping on morphology and electrochemical properties of sub-micron RuO2 sensing electrode of DO sensor

Thick-film 20 mol% ZnO-doped RuO₂ sensing electrodes (SEs) were fabricated by screen-printing technique on the platinised alumina substrate of the planar electrochemical dissolved oxygen (DO) sensor. The effect of ZnO doping on morphology, electrochemical properties and sensing characteristics of the sensor was investigated. It was found that ZnO doping has not only improved the SE structure, but has also enhanced selectivity of the DO sensor. Selectivity testing exhibited that the presence of Cl⁻, Li⁺, SO₄²⁻, NO³⁻, Ca²⁺, PO₄³⁻, Mg²⁺, Na⁺ and K⁺ with a concentration range of 10⁻⁷ to 10⁻¹ mol/L in the solution had practically no effect on the sensor's emf. The reason in enhancement of the sensor characteristics could be related to the establishment of the better structured SE as more advanced crystallization is achieved for the doped RuO₂-SE.     

Theoretical Consideration on Triplet Superconductivity in UPt3 and Sr2RuO4

Two representative superconductors, UPt₃ and Sr₂RuO₄, are comparatively studied on the basis of a general symmetry argument. The existing experimental data set for both systems strongly and commonly points to a triplet pairing. For the former, heavy fermion material, UPt₃, a non-unitary bipolar state is the most possible candidate, whereas for the latter system, Sr₂RuO₄, determination of a precise pairing symmetry class, either unitary or non-unitary, is debated.     

Three-dimensional heterostructured MnO2/graphene/carbon nanotube composite on Ni foam for binder-free supercapacitor electrode

In this article, three-dimensional (3D) heterostructured of MnO₂/graphene/carbon nanotube (CNT) composites were synthesized by electrochemical deposition (ELD)-electrophoretic deposition (EPD) and subsequently chemical vapour deposition (CVD) methods. MnO₂/graphene/CNT composites were directly used as binder-free electrodes to investigate the electrochemical performance. To design a novel electrode material with high specific area and excellent electrochemical property, the Ni foam was chosen as the substrate, which could provide a 3D skeleton extremely enhancing the specific surface area and limiting the huge volume change of the active materials. The experimental results indicated that the specific capacitance of MnO₂/graphene/CNT composite was up to 377.1 F g^?1 at the scan speed of 200 mV s^?1 with a measured energy density of 75.4 Wh kg^?1. The 3D hybrid structures also exhibited superior long cycling life with close to 90% specific capacitance retained after 500 cycles.     

The Specific Heat and the Fermi Surface Anisotropy in Sr2RuO4

The influence of the Fermi surface anisotropy on the specific heat jump is studied for the p-wave superconductor with a gap function d = z^(k _x ± ik _y ) in connection with Sr₂RuO₄. It is shown that the normalized specific heat jump, C/T _c , is reduced from its universal value, 1.43, in accordance with experimental findings. We show that this behavior fits well into our present understanding of the quasiparticle spectrum and the impurity effects.     

p-Wave Superconductors in Sr2RuO4 and Bechgaard Salts

We review our recent works on the vortex state in p-wave superconductors. First, in a magnetic field parallel to the c-axis, the square vortex lattice is most stable, except in the immediate vicinity of T = T _c0. Second, the effect of impurities on H _c2 is studied, which exhibits characteristics of unconventional superconductors. Finally, the a–b anisotropy in the upper critical field in a magnetic field is considered. This anisotropy provides important information about the fourfold term arising from the Fermi surface effect.     

Production of graphene nanosheets by supercritical CO2 process coupled with micro-jet exfoliation

A facile and cost-effective method which combines supercritical CO₂ and micro-jet exfoliation has been developed for producing graphene nanosheets with high-quality. CO₂ molecules can intercalate into the interlayer of graphite because of their high diffusivity and small molecule size in supercritical operation. The tensile stress induced by graphite interfacial reflection of compressive waves exert on the graphite flakes, which lead to further exfoliation of graphite. Scanning electron microscope (SEM), transmission electron microscope (TEM), atomic force microscopy (AFM), Raman spectrum and X-ray diffraction (XRD) are used to identify morphology and quality of the exfoliated graphene nanosheets, which reveal that the graphite was successfully exfoliated into graphene and more than 88% of graphene nanosheets are less than three layers. The yield of graphene nanosheets is about 28 wt% under optimum conditions, which can be greatly improved by repeated exfoliation of the graphene sediment. The pure graphene film has a high conductivity of 2.1 × 10⁵ S/m.     

Excellent visible light photocatalytic properties of novel graphene based CdLa2S4/TiO2 heterojunction nanocomposite

This paper introduced one pot method for the synthesis of hybrid CdLa₂S₄-graphene/TiO₂ nanocomposite. The surface properties seen by SEM present a characterization of the texture on CdLa₂S₄-graphene/TiO₂ composites and showed a homogenous composition in the particles. The EDX spectra for the elemental identification showed the presence of C, O and Ti with strong Cd, La and S peaks for the CdLa₂S₄-graphene/TiO₂ nanocomposite. The generation of reactive oxygen species were detected through the oxidation reaction from 1,5-diphenyl carbazide (DPCI) to 1,5-diphenyl carbazone (DPCO). It is found that the photocurrent density and the photocatalytic effect increase in the case with the modified CdLa₂S₄.From the photocatalytic results, the excellent activity of CdLa₂S₄-graphene/TiO₂ nanocompositefor degradation of methylene blue (MB) and Texbrite BA-L (TBA) undervisible irradiation could be attributed to both the effects between photocatalysis of the supported TiO₂ and charge transfer of the grapheme nanosheet, and the introduction of CdLa₂S₄ to enhance the photogenerated electrons.     

Investigation of electrochemical properties of RuO2 thin films modified by e-beam irradiation

The influence of electron beam irradiation on the electrochemical properties of electrodeposited RuO₂ thin films was investigated using a 1 MeV electron beam. Crystallinity change before and after electron beam irradiation was investigated by X-ray diffraction, and the oxidation state of ruthenium was determined by X-ray photoelectron spectroscopy. Scanning electron microscopy was utilized to examine the morphology of the films. The results show that electron beam irradiation altered the oxidation state of ruthenium and increased crystallinity.Cyclic voltammetry was employed to evaluate the electrochemical properties of the synthesized RuO₂ films in terms of their application as electrodes of electrochemical capacitors. RuO₂ irradiated with 40 kGy showed 2.7 times higher capacitance (520 Fg⁻¹) than the as-electrodeposited sample (190 Fg⁻¹).     

Immobilization of TiO2 nanoparticles on Fe-filled carbon nanocapsules for photocatalytic applications

Using a simple sol-gel method, a novel magnetic photocatalyst was produced by immobilization of TiO₂ nano-crystal on Fe-filled carbon nanocapsules (Fe-CNC). High resolution TEM images indicated that the immobilization of TiO₂ on Fe-CNC was driven primarily by heterogeneous coagulation, whereas surface nucleation and growth was the dominant mechanism for immobilizing TiO₂ on acid-functionalized hollow CNC. The TiO₂ immobilized on Fe-CNC exhibited the anatase phase as revealed by the X-ray diffraction (XRD) patterns. In comparison with free TiO₂ and TiO₂-coated CNC, TiO₂-coated Fe-CNC displayed good performance in the removal of NO gas under UV exposure. Due to the advantages of easy recycling and good photocatalytic efficiency, the novel magnetic photocatalyst developed here has potential use in photocatalytic applications for pollution prevention.     

In situ synthesis of SnO2/graphene nanocomposite and their application as anode material for lithium ion battery

SnO₂/graphene nanocomposite was prepared via an in situ chemical synthesis method. The nanocomposite was characterized by X-ray diffraction, filed emission scanning electron microscope and transmission electron microscope, which revealed that tiny SnO₂ nanoparticles could be homogeneously distributed on the graphene matrix. The electrochemical performance of the SnO₂/graphene nanocomposite as anode material was measured by galvanostatic charge/discharge cycling. The SnO₂/graphene nanocomposite showed a reversible capacity of 665 mAh/g after 50 cycles and an excellent cycling performance for lithium ion battery, which was ascribed to the three-dimensional architecture of SnO₂/graphene nanocomposite. These results suggest that SnO₂/graphene nanocomposite would be a promising anode material for lithium ion battery.     

Ultrathin Co3O4 nanosheets highly dispersed on reduced graphene oxide: An efficient bi-functional catalyst for Li-O2 battery

Ultrathin Co₃O₄ nanosheets grown on the reduced graphene oxide (Co₃O₄/rGO) was synthesized by a simple hydrothermal method and was investigated as a cathode in a Li-O₂ battery. Benefited from the synergistic effect between Co₃O₄ and rGO, the hybrid exhibits a high initial capacity of 10,528 mAh g^?1 along with a high coulombic efficiency (84.4%) at 100 mA g^?1. In addition, the batteries show an enhanced cycling stability and after 113 cycles, the cut-off discharge voltage remains above 2.5 V. The outstanding performance is intimately related to the high surface area of rGO, which not only provide carbon skeleton for the uniform distribution of Co₃O₄ nanosheets but also facilitate the reversible formation and decomposition of insoluble Li₂O₂. The results of electrochemical tests confirm that the Co₃O₄/rGO hybrid is a promising candidate for the Li-O₂ batteries.     

Gas sensing mechanism of TiO2-based thin films

Two classes of thin film gas sensors have been studied: TiO₂ doped with Cr or Nb and TiO₂-SnO₂ mixed systems. Thin films have been prepared by the reactive sputtering from mosaic targets. It is demonstrated that titanium dioxide doped with Nb and Cr should be considered as a bulk sensor. Its performance is governed by the diffusion of point defects, i.e. very slow diffusion of Ti vacancies for TiO₂: 9.5 at% of Nb and fast diffusion of oxygen vacancies in the case of TiO₂: 2.5 at% Cr sensor. The corresponding response times are 55 min for TiO₂: 9.5 at% of Nb and 20 s for TiO₂: 2.5 at% Cr. In turn, sensors based on TiO₂-SnO₂, particularly those of the SnO₂-rich composition, belong to the group of surface sensors.     

Combination of MoS2 nanopetals with Ag nanoparticles decorated graphene oxide for boosting photocatalytic abatement of recalcitrant pollutants under visible light irradiation

Herein, various weight ratios (1:1, 1:3, and 3:1) of MoS₂/GO composites decorated with Ag nanoparticles (named as MAG) have been prepared by microwave-assisted route. XRD and XPS investigations indicated the catalyst crystallinity and elemental oxidation states. Morphological analysis revealed presence of small MoS₂ nanopetals scattered on GO sheets with Ag NPs dispersed on surface whereas BET-analysis disclosed its excellent surface area (～88 m²/g). Optical properties of MAG catalysts revealed that they were highly visible-light active, with a bandgap of 2.15 eV and a lower charge recombination rate. Excellent efficiency was observed for TC (90.7%; 0.0186 min^?1) and FIP-degradation (85.2%; 0.0177 min^?1) with 4 mg MAG (3:1) catalyst at neutral pH under visible-light irradiation owing to high synergistic interaction (～2.21) in the composite. Effects of catalyst amount, pH, and effective area of illumination on degradation were investigated. High reusable nature of the catalyst (65% (TC) and 58% (FIP) efficiency after 5 cycles) was supported by post-photocatalytic characterization studies. Photodegradation products of TC were determined via LC-MS studies. Holes and hydroxyl radicals were majorly involved in degradation process revealed by trapping studies. High COD (70.4%) and TOC (55.1%) removal rates confirm high photo-mineralization of real-wastewater without any pre-treatment. The current investigation, combined with comparative literature, illustrates real-world potential of MAG catalysts for eradication of resistant pollutants.     

Hydrothermal synthesis of ZnO flower-reduced graphene oxide composite for electrochemical determination of ascorbic acid

In this work, reduced graphene oxide coated zinc oxide flower (ZnO–RGO) nanocomposite has been prepared via a simple one-pot hydrothermal synthesis method. The morphology and properties of the proposed ZnO–RGO were characterized using SEM, Raman and UV–VIS spectroscopy. Then, an ascorbic acid (AA) electrochemical sensor was prepared based on a glassy carbon electrode (GCE) modified with the ZnO–RGO nanocomposite. An advanced performance was recorded on the ZnO–RGO/GCE compared with that of the bare GCE, ZnO/GCE, and RGO/GCE. The proposed electrochemical sensor exhibited a wide linear detection from 5 μM to 2 mM with a low detection limit of 1.2 μM. Further, the proposed AA electrochemical sensor showed a good repeatability, reproducibility and stability.     

Microwave-assisted synthesis of Bi2Se3 /reduced graphene oxide nanocomposite as efficient catalytic counter electrodefordye-sensitized solar cell

Bi₂Se₃/reduced graphene oxide (rGO) composite was successfully synthesized by a facile microwave-assisted hydrothermal method and applied as a counter electrode for efficient dye-sensitized solar cells. By this means, the size and distribution of the formed Bi₂Se₃ nanoparticles onto a flexible graphene sheet were effectively controlled, which is crucial for achieving high electrocatalytic activity on I₃^? reduction. Mainly due to the homogeneous single-layer immobilization of Bi₂Se₃ nanoparticles on a graphene sheet with high density, BiG2 exhibited the highest catalytic activity and the lowest electrolyte diffusion resistance. Adye-sensitized solar cell with BiG2 as a counter electrode can yield 7.09% photoelectric conversion efficiency, which is comparable to that of the cell with a Pt-film counter electrode (6.23), exhibiting the application potential of BiG2 as a low cost non-Pt CE materials for DSSC.