Experimental study on premixed combustion of spherically propagating methanol-air-nitrogen flames

The outward propagation and development of surface instability of the spark-ignited spherical premixed flames for methanol-air-nitrogen mixtures were experimentally studied by using a constant volume combustion chamber and a high-speed schlieren photography system. The laminar burning velocities, the mass burning fluxes, and the Markstein lengths were obtained at different equivalence ratios, dilution ratios, initial temperatures, and pressures. The laminar burning velocities and the mass burning fluxes give a similar curve versus the equivalence ratios. They increase with the increase of initial temperature and decrease with the increase of dilution ratio. The laminar burning velocity decreases with elevating the initial pressure, while the mass burning flux increases with the increase of the initial pressure. Markstein length decreases slightly with the increase of initial temperature for the rich mixtures. High initial pressure corresponds to low Markstein length. Markstein length increases with the increase of dilution ratio, which is more obvious when the mixture becomes leaner. Equivalence ratio has a slight impact on the development of the diffusive-thermal cellular structure at elevated initial pressures. The initial pressure has a significant influence on the occurrence of the flame front cellular structure. At the elevated pressures, the cracks on the flame surface branch and develop into the cell structure. These cells are bounded by cracks emitting a bright light, which may indicate soot formation. For very lean mixture combustion, the buoyancy effect and cooling effect from the spark electrodes have a significant impact on the flame propagation. The hydrodynamic instability, inhibited with the increase of initial temperature around the stoichiometric equivalence ratio, is enhanced with the increase of initial pressure and suppressed by mixture dilution.     

Measurements of laminar burning velocities and flame stability analysis for dissociated methanol–air–diluent mixtures at elevated temperatures and pressures

The laminar burning velocities and Markstein lengths for the dissociated methanol–air–diluent mixtures were measured at different equivalence ratios, initial temperatures and pressures, diluents (N₂ and CO₂) and dilution ratios by using the spherically outward expanding flame. The influences of these parameters on the laminar burning velocity and Markstein length were analyzed. The results show that the laminar burning velocity of dissociated methanol–air mixture increases with an increase in initial temperature and decreases with an increase in initial pressure. The peak laminar burning velocity occurs at equivalence ratio of 1.8. The Markstein length decreases with an increase in initial temperature and initial pressure. Cellular flame structures are presented at early flame propagation stage with the decrease of equivalence ratio or dilution ratio. The transition positions can be observed in the curve of flame propagation speed to stretch rate, indicating the occurrence of cellular structure at flame fronts. Mixture diluents (N₂ and CO₂) will decrease the laminar burning velocities of mixtures and increase the sensitivity of flame front to flame stretch rate. Markstein length increases with an increase in dilution ratio except for very lean mixture (equivalence ratio less than 0.8). CO₂ dilution has a greater impact on laminar flame speed and flame front stability compared to N₂. It is also demonstrated that the normalized unstretched laminar burning velocity is only related to dilution ratio and is not influenced by equivalence ratio.     

甲醇-空气-氮气混合气预混球型火焰的试验研究

利用高速纹影摄像法在定容燃烧弹内研究了不同燃空当最比、初始压力、初始温度和气体稀释度下甲醇-空气-氮气混合气预混球型火焰的发展特性以及3种火焰锋面的不稳定性.获得了不同初始状态下的层流燃烧速度、质量燃烧流量和马克斯坦长度.高的初始压力时,火焰锋面生成的裂纹发展并形成细胞状结构.稀混合气时,浮力和电极的冷却作用对火焰的发展有重要影响.当量比在化学计量比附近时,随着初始温度的提高,流体动力学不稳定性被抑制.随着初始压力的增加,流体动力学不稳定性增强.稀释气的加入抑制了火焰锋面流体动力学的不稳定性.     

Measurements of laminar burning velocities and Markstein lengths for methanol-air-nitrogen mixtures at elevated pressures and temperatures

The laminar burning velocities and Markstein lengths for the methanol-air mixtures were measured at different equivalence ratios, elevated initial pressures and temperatures, and dilution ratios by using a constant volume combustion chamber and high-speed schlieren photography system. The influences of these parameters on the laminar burning velocity and Markstein length were analyzed. The results show that the laminar burning velocity of the methanol-air mixture decreases with an increase in initial pressure and increases with an increase in initial temperature. The Markstein length decreases with an increase in initial pressure and initial temperature, and increases with an increase in the dilution ratio. A cellular flame structure is observed at an early stage of flame propagation. The transition point is identified on the curve of flame propagation speed against stretch rate. The reasons for the cellular structure development are also analyzed.     

Laminar burning velocities and flame instabilities of 2,5-dimethylfuran–air mixtures at elevated pressures

An experimental investigation on laminar burning velocities and onset of flame instabilities on spherically expanding flames in 2,5-dimethylfuran–air mixtures at elevated pressures was conducted over a wide range of equivalence ratios. The laminar burning velocities, laminar burning fluxes and Markstein lengths at different equivalence ratios and initial pressures were obtained. Furthermore, the diffusional–thermal and hydrodynamic effects on flame front instabilities were specified, and the onset of cellularity was reported. Results show that laminar burning velocities are decreased with increasing initial pressure due to the increase of the free-stream density and the progressively more important three-body termination reactions. With increasing initial pressure, Markstein length decrease, while the laminar burning flux increases. Onsets of flame instabilities, expressed in terms of critical radius or Peclet number, were found to be promoted with increasing equivalence ratio and initial pressures, due to the combined effects of diffusional–thermal and hydrodynamic instabilities.     

Effects of initial pressure and hydrogen concentration on laminar combustion characteristics of diluted natural gas–hydrogen–air mixture

In this study, the experiment study about the laminar burning velocity and the flame stability of CO₂ diluted natural gas–hydrogen–air mixture was conducted in a constant volume combustion vessel by using the high-speed schlieren photography system. The unstretched laminar burning velocity and the Markstein length at different hydrogen fractions, dilution ratios and equivalence ratios and with different initial pressures were obtained. The flame stability was studied by analyzing the Markstein length, the flame thickness, the density ratio and the flame propagation schlieren photos. The results showed that the unstretched laminar burning velocity would be reduced with the increase of the initial pressure and dilution ratio and would be increased with the increase of the hydrogen fraction of the mixture. Meanwhile, the Markstein length would be increased with the increase of the equivalence ratio and the dilution ratio. Slight flaws occurred at the early stage. At a specific equivalence ratio, a higher initial pressure and hydrogen fraction would cause incomplete combustion.     

Effect of initial pressure on laminar combustion characteristics of hydrogen enriched natural gas

Flame propagation of premixed natural gas–hydrogen–air mixtures was studied in a constant volume combustion bomb. Laminar burning velocities and mass burning fluxes were obtained under various hydrogen fractions and equivalence ratios with various initial pressures, while flame stability and their influencing factors (Markstein length, density ratio and flame thickness) were obtained by analyzing the flame images at various hydrogen fractions, initial pressures and equivalence ratios. The results show that hydrogen fraction, initial pressure as well as equivalence ratio have combined influence on both unstretched laminar burning velocity and flame instability. Meanwhile, according to flame propagation pictures taken by the high speed camera, flame stability decreases with the increase of initial pressures; for given equivalence ratio and hydrogen fraction, flame thickness is more sensitive to the variation of the initial pressure than to that of the density ratio.     

二甲醚-空气混合气层流燃烧速度的测定

在定容燃烧弹中利用高速纹影摄像法系统地研究了不同燃空当量比和初始压力下二甲醚-空气混合气的层流燃烧特性.利用球形扩散火焰理论分析纹影照片,获得了不同初始压力和当量比下的二甲醚-空气混合气层流燃烧速率.结果表明：随着初始压力的增大,层流燃烧速率显著减小,层流燃烧速率的峰值向浓混合气侧偏移.拉伸层流燃烧速率随拉伸率的增加而增加,拉伸层流质量燃烧速率随拉伸率的增加而减小.根据球形扩散火焰模型得到混合气的马克斯坦长度值表明：在各初始压力下,随着当量比的增加,二甲醚-空气混合气的马克斯坦长度值逐渐减小,火焰前锋面的不稳定性增加.     

Experimental and kinetic study of laminar flame characteristics of H2/O2/diluent flame under elevated pressure

Laminar burning velocity, Markstein length, and critical flame radius of an H₂/O₂ flame with different diluents, He, Ar, N₂ and CO₂, were measured under elevated pressure with different diluent concentrations. The effects of pressures, diluents, and dilution and equivalence ratios were studied by comparing calculated and experimental results. The laminar burning velocity showed non-monotonic behavior with pressure when the dilution ratio was low. The reason is the radical pool reduced with increasing pressure and leads to the decrease of overall reaction order from larger than 2 to smaller than 2, and further leads to this non-monotonic phenomenon. A modified empirical equation was presented to capture the relationship between active radicals and laminar burning velocity. Critical radii and Markstein lengths both decrease with initial pressure and increase with equivalence ratio and dilution ratio. The calculated critical radii indicate that the Peclet number and flame thickness control the change of R_cr. It can be found that Le_eff has a significant influence on Peclet number and leads to the decrease of critical flame radii of Ar, N_2, and CO₂ diluted mixture. Interestingly, the CO₂ diluted mixture has the lowest Markstein length under stoichiometric conditions and a high value under fuel-rich conditions, consistent as the flame instability observed on the flame images. The reason is that the Le_eff of CO₂ diluted mixture increased rapidly with the equivalence ratio.     

二乙醚-空气预混合气层流燃烧速率测定

在定容燃烧弹内利用高速纹影摄像法系统地研究了不同初始压力、不同初始温度和不同燃空当量比下二乙醚-空气预混合气的层流燃烧特性。利用球形发展火焰分析得到了不同初始压力、不同初始温度和不同燃空当量比下二乙醚-空气预混合气的无拉伸层流火焰燃烧速率、马克斯坦长度等层流燃烧参数。研究结果表明:无拉伸层流火焰燃烧速率随初始温度的增加而增加,随初始压力的增加而降低;马克斯坦长度随着初始温度的增加而减小,随初始压力的增加而减小,随当量比的增加而减小,表明火焰前锋面不稳定性随初始温度和初始压力的增加而增加,随混合气浓度的增加而增加。基于试验数据获得了二乙醚-空气预混合气无拉伸层流燃烧速率的关系式。     

异丁醇/辛酸甲酯混合燃料预混层流火焰速度的研究

针对生物柴油与醇类混合燃料燃烧机理研究的需求,采用高速纹影光学诊断方法和定容燃烧弹系统试验研究了异丁醇/辛酸甲酯混合燃料的预混层流燃烧特性。测量了不同当量比和初始压力条件下的不同配比混合燃料—空气预混合气的层流燃烧火焰速度,火焰拉伸率以及马克斯坦长度。分析了燃烧初始条件及异丁醇掺混比例对混合燃料的无拉伸层流燃烧速度及火焰不稳定性的影响规律。结果表明:异丁醇/辛酸甲酯混合燃料的拉伸层流火焰传播速度和层流火焰燃烧速度随着当量比的增加先增加后减少,随着初始压力的增加而减小;马克斯坦长度随着当量比和初始压力的增加而减小;异丁醇掺混比例的增加加快了层流火焰燃烧速度,但使得火焰的不稳定性倾向增加。     

初始压力对天然气-氢气-空气混合气火焰传播特性的影响

使用定容燃烧弹研究了不同初始压力下天然气-氢气-空气混合气的火焰传播规律,得到了初始压力、掺氢比和燃空当量比对无拉伸层流燃烧速率、质量燃烧流量的影响,结合高速纹影图片分析了影响火焰稳定性的因素(马克斯坦长度、火焰面两侧密度比和火焰厚度).结果表明,掺氢天然气无拉伸层流燃烧速率以及火焰的不稳定性受掺氢比、初始压力和燃空当量比的综合影响.结合高速纹影图片,得出火焰的稳定性会随初始压力的增加而减小;在相同的燃空当量比和掺氢比下,初始压力对密度比的影响不大,但是对火焰厚度的影响比较明显.     

天然气-氢气-空气混合气的层流燃烧速度测定

在定容燃烧弹内研究了常温常压下天然气-氢气-空气混合气的火焰传播规律,得到了不同掺氢比例（氢气在天然气中的体积掺混比例为0％～100％）和燃空当量比（0．6～1．4）下混合气的层流燃烧速率和马克斯坦长度,通过对马克斯坦长度的测量,分析了拉伸对火焰传播的影响。结果表明,随着天然气中掺氢比例的增加,混合气的燃烧速率呈指数规律增加,马克斯坦长度值减小,火焰的稳定性下降。各掺氢比例下,随当量比的增加,马克斯坦长度值增加,火焰的稳定性增强。通过对试验结果的数据拟合,得到了计算天然气-氢气-空气混合气层流燃烧速率的关系式。     

Effects of high pressure,high temperature and dilution on laminar burning velocities and Markstein lengths of iso-octane/air mixtures

Spherically expanding flames are employed to measure flame velocities, from which are derived the corresponding laminar burning velocities at zero stretch rate. Iso-octane/air mixtures at initial temperatures between 323 and 473 K, and pressures between 1 and 10 bar, are studied over an extensive range of equivalence ratios, using a high-speed shadowgraph system. Effects of dilution are investigated with nitrogen and for several dilution percentages (from 5 to 25 vol% N₂). Over 270 experimental values have been obtained, providing an exhaustive data base for iso-octane/air combustion. Experimental results are in excellent agreement with recently published experimental data. An explicit correlation giving the laminar burning velocity from the initial pressure, the initial temperature, the dilution rate, and the equivalence ratio is finally proposed. Computed results using the two kinetic schemes and the Cantera code are compared to the present measurements. It is found that the mechanisms yield substantially higher values of laminar flame velocities than the present experimental results. Effects of oxygen enrichment are also investigated. A linear trend relating the percentage of oxygen in air and the unstretched laminar burning velocity is observed. Effects of high pressure, high temperature, and high dilution rate on Markstein lengths are also studied. As already done for the laminar burning velocity, an empirical correlation is proposed to describe the Markstein length for burned gases as a function of initial temperature and pressure, for equivalence ratios between 0.9 and 1.1, which has never been done before in the literature.     

高温高压条件下乙醇-空气-稀释气预混合气层流燃烧特性研究

利用定容燃烧弹和高速纹影摄像手段研究了不同初始压力、初始温度、气体稀释度和燃空当量比下乙醇-空气-稀释气预混层流燃烧特性的基础特征参数,如绝热火焰温度、层流燃烧速度、层流燃烧质量流量、层流燃烧火焰厚度和已燃气体Markstein长度。研究结果表明:在给定初始压力、初始温度和气体稀释度的情况下,绝热火焰温度、质量燃烧流量和层流燃烧速度的最大值均出现在当量比1.0～1.1,层流火焰厚度在当量比1.1处取得最小值;已燃气体Markstein长度随当量比的增加呈下降趋势;在给定当量比条件下,绝热火焰温度随初始压力、初始温度的增加而增加,随氮气稀释度的增加而降低;层流燃烧速度随初始压力和氮气稀释度增加而降低,随初始温度增加而增加;层流质量燃烧流量随初始压力和初始温度的增加而增加;随氮气稀释度增加而减小;层流火焰厚度和已燃气体Markstein长度随初始压力和初始温度的增加而减小,随氮气稀释度的增加而增加。     

不同初始压力下掺氢天然气的燃烧特性

在定容燃烧弹内研究了不同初始压力下天然气-氢气-空气混合气的火焰传播规律,得到了不同掺氢比例和初始压力下,不同燃空当量比时混合气的层流燃烧速率,并分析了火焰的稳定性及其影响因素.研究结果表明,随着天然气中掺氢比例的增加,混合气的燃烧速率增加,且增长速率逐渐加快,而马克斯坦长度值则随着掺氢比例的增加而减小,即火焰的稳定性下降.不同初始压力下,随着燃空当量比的增加,马克斯坦长度值在不同掺氢比例下均增加,显示火焰的稳定性增加.无拉伸层流燃烧速率随着初始压力的增加略有减小,且在化学当量比附近,变化的初始压力和掺氢比对无拉伸层流燃烧速率的影响最为明显.     

氮气稀释气对天然气燃烧特性的影响

为获得氮气稀释气对天然气燃烧特性的影响规律,在定容燃烧反应器中对不同当量比与初始压力下天然气的火焰传播特性、燃烧稳定性及燃烧特性进行了试验测试,并分析了氮气稀释度对天然气火焰传播特性、燃烧稳定性及燃烧特性的影响规律。研究结果表明:随着初始压力与氮气稀释度的升高,火焰前锋面将出现细小裂纹,火核逐渐向定容燃烧反应器上部漂移,火焰稳定性变差;随着初始压力的提高,马克斯坦长度明显变短,火焰稳定性变差,无拉伸火焰传播速度与层流燃烧速度明显降低,但最大燃烧压力显著升高。随着当量比的提高,层流燃烧速度与最大燃烧压力出现先增加后降低的趋势,两者的最大值出现在当量比为1.0时。马克斯坦长度随氮气稀释度的增加逐渐变短,表明火焰逐渐趋于不稳定;同时,无拉伸火焰传播速度、层流燃烧速度与最大燃烧压力随氮气稀释度的增加显著降低。     

天然气-氢气-空气混合气火焰传播特性研究

在定容燃烧弹内研究了初始条件为常温常压的灭然气-氢气-空气混合气火焰传播规律,得到了不同掺氢比例和燃空当量比下混合气的层流燃烧速率、质量燃烧流量和马克斯坦长度,结合火焰传播照片,分析了火焰的稳定性并预测了大尺寸火焰稳定性的演变趋势。研究结果表明,随着天然气中掺氢比例的增加,混合气的燃烧速率增加,且增长速率逐渐加快,马克斯坦长度值减小,火焰的稳定性下降。各种掺氢比例下,随当量比的增加,马克斯坦长度值增加,火焰的稳定性增加。掺氢比例高于80％时,随着火焰的传播,其不稳定性将明显增加。     

高温高压下掺氢天然气的燃烧特性

在定容燃烧弹内研究了高温(450,K)、高压(0.75,MPa)条件下天然气-氢气-空气混合气的火焰传播过程,获得了不同掺氢比和不同当量比下掺氢天然气的无拉伸层流燃烧速率,并分析了火焰的稳定性。结果表明,高温高压下随着掺氢比的增加,掺氢天然气的燃烧速率增加,且增长速率逐渐加快;马克斯坦长度则随着掺氢比的增加而减小,即火焰的稳定性下降。随着当量比的增加,无拉伸层流燃烧速率呈现先增大后减小的趋势,且最大无拉伸层流燃烧速率所对应当量比的位置随着掺氢比的提高而向浓混合气移动;马克斯坦长度随当量比的增加而增大,即火焰稳定性随当量比的增加而提高。     

Study of laminar combustion characteristics of gasoline surrogate fuel-hydrogen-air premixed flames

This paper investigated the effects of hydrogen addition to gasoline surrogates fuel-air mixture on the premixed spherical flame laminar combustion characteristics. The experiments were carried out by high speed Schlieren photography on a constant-volume combustion vessel. Combining with nonlinear fitting technique, the variation of flame propagation speed, laminar burning velocity, Markstein length, flame thickness, thermal expansion coefficient and mass burning flux were studied at various equivalence ratios (0.8–1.4) and hydrogen mixing ratios (0%–50%). The results suggested that the nonlinear fitting method had a better agreement with the experimental data in this paper and the flame propagation was strongly effected by stretch at low equivalence ratios. The stretched propagation speed increased with the increase of hydrogen fraction at the same equivalence ratio. For a given hydrogen fraction, Markstein length decreased with the increase of equivalence ratio; flame propagation speed and laminar burning velocity first increased and then decreased with the increase of equivalence ratio while the peaks of the burning velocity shifted toward the richer side with the increase of hydrogen fraction.