共查询到20条相似文献,搜索用时 406 毫秒
1.
2.
3.
4.
5.
本文以大量的实验数据,介绍生产可控光敏降解地膜的主要原料、设备和工艺,光敏催化剂、促进剂的选用原则,光解地膜降解情况的评价标准。总结四年多来在上海、新疆,河南等地的棉花、西瓜、蔬菜等农田实际应用情况。结果表明,可控光解地膜除使用性能上与普遍地膜相似外,还具有预定的有效使用期。长期使用土壤中不积累残膜、不污染环境、不影响土质和下茬作物生长。 相似文献
6.
降解性聚乙烯地膜的研制及其降解过程 总被引:7,自引:1,他引:6
采用复合光敏剂并添加改性淀粉的方法,制备出降解诱导期可控的光和生物双降解聚乙烯地膜。地膜的力学性能符合GB13735-92标准,在田间曝露40天左右后出现崩裂,强度急剧下降且呈突变性,经四个月后粘均分子量已降至5000以下。真菌抗性试验表明此时的残膜易被土壤微生物侵蚀。采用红外光谱法对地膜降解过程中的化学结构变化进行了考察。 相似文献
7.
含羧酸铈光敏剂的LDPE地膜应用研究 总被引:1,自引:0,他引:1
研究了羧酸铈光敏剂及其配合体系的组成、各组分的协同关系和作用,讨论了其配合体系对聚乙烯地膜断裂伸长率、羰基指数和分子量的影响,并进行了农田覆盖地膜应用试验。结果表明,含羧酸铈光敏剂配合体系的聚乙烯地膜具有良好的使用性能和光降解可控性能。 相似文献
8.
一、重点开发 出口换汇、支援农业、高新技术、高附加值等塑料制品。 二、农用塑料制品 可控降解地膜,多功能农地膜、节水灌溉器材、畜牧和农副产品等用塑料制品。 相似文献
9.
我国是设施农业大国,聚乙烯(Polyethylene, PE)农用地膜大量使用,而且PE在环境中较难降解。为了得到能够高效降解PE的菌种资源,以PE地膜为唯一碳源,采用富集培养法从设施大棚土壤中筛选出一株高效的PE降解菌株,命名为BP1菌株,该菌株对PE农用地膜的降解率达9.99%。利用SEM电镜观察到BP1降解菌降解处理后PE地膜表面出现凹槽、生物侵蚀等现象。FTIR光谱仪分析表明,PE地膜表面发生C-H伸缩振动峰的削弱与酯羰基指数的降低。通过形态学观察和分子生物学鉴定,BP1菌株为枯草芽孢杆菌(Bacillus subtilis sp.)。该菌能显著提高PE地膜的降解速率,这为缓解废弃农用地膜污染问题,改善农田生态环境提供理论支撑。 相似文献
10.
11.
12.
13.
Dinesh Singh J. K. Gehlawat Musti S. Rao 《Journal of chemical technology and biotechnology (Oxford, Oxfordshire : 1986)》1990,47(2):127-136
Oslefins and diolefins are important intermediates in the petrochemical industry and the future promises a further substantial increase in demand. While several catalysts have been formulated in the past for the abstraction of hydrogen from butenes and propylene, these catalysts are inefficient in the abstraction of first hydrogen from butane. Bismuth molybdates (β and γ-phases) containing iron oxide and supported on alumina are used as catalysts in the present investigation on the oxidative dehydrogenation of n-butane. Effects of catalyst content, temperature and oxygen: n-butane ratio on conversion and selectivity to butadiene and (C4H8 + C4H6) are studied in the following ranges of experimental conditions: β-bismuth molybdate/100 mol support I(K), 3–9; γ-bismuth molybdate/100 mol support I(K), 5-20; temperature, 400–500°C; O2: butane ratio, 0.6:1.7. 相似文献
14.
考登钢作为一种高耐候结构钢,广泛应用于各个领域。在火力发电方面,考登钢主要应用在工作环境比较恶劣的烟气加热器和空气预热器中。考登钢表面涂搪的目的就是进一步提高其耐腐蚀性能,延长使用寿命。为了提高考登钢元件的使用寿命,对考登钢表面涂搪瓷的可行性、密着性能、瓷釉、工艺控制、质量保证等方面进行了研究。 相似文献
15.
A viscometer used to measure the viscosity of 10 μl of a liquid, must be miniaturized down, and the liquid velocity gradient in the channel used to determine the viscosity coefficient. Two major factors that affect the liquid velocity are the mechanical forces exerted by the mechanical motors and electromagnetic forces. In this study, electrowetting on dielectric (EWOD) is adopted to drive liquids. Variously sized electrodes on a chip, and two shapes of channel are employed to measure the velocity gradient to determine the viscosity coefficient. The device is fabricated by microelectromechanical system (MEMS) technology. The dielectric layer used in EWOD has a high dielectric constant, BST (Ba0.7Sr0.3TiO3), to reduce the required applied voltage; its surface is coated with hydrophobic polymer, polytetrafluoro-ethylene (PTFE, Teflon® AF DuPont). Experimental results demonstrate that liquids can be pulled at 660 μm/s in linear channels by applying a voltage of 15 V. 相似文献
16.
研究了温度和pH值对漆酶酶活以及漆酶处理纤维压制纤维板性能的影响。结果表明,pH较低、温度较高时漆酶酶活较高,压制的纤维板强度性能较好。但温度太高(60~80℃),延长加热时间,漆酶稳定性变差,酶活明显降低,压制纤维板的强度下降。 相似文献
17.
In reexamining medium effects on photochemical reactions, we have emphasized those on unequilibrated excited species such as the Franck-Condon species. Despite recent advances in femtochemistry, such a discussion in molecular photochemistry is uncommon, and the problem remains challenging on account of the extremely short-lived excited species. However, in such cases, a small perturbation resulting from, for example, weak guest-host interactions could turn into a determining factor in dictating the course of a photochemical channel of deactivation. Examples of medium-directed diabatic processes have been examined with this idea in mind. A modified view on rhodopsin photoisomerization is presented along with the consideration that confinement does not necessarily lead to inhibition of reactions of the trapped substrate. 相似文献
18.
19.
20.
采用实验方法考察工艺参数对沉降斑的影响。基于一个带凸台的平板模具,采用L27(313)正交矩阵进行实验,研究了几何尺寸、熔体温度、注射时间、保压压力及保压时间对厚度突变处沉降斑形成的影响,同时还考虑了熔体温度和注射时间以及保压压力和注射时间之间的交互作用影响;通过性噪比分析和F检验优化成型工艺条件并对工艺参数的影响进行显著性分析。结果表明,对于厚度突变的平板制品,厚度突变的程度对其沉降斑形成的影响最大,其次为熔体温度,保压压力,保压时间等;采取减小厚度变化,降低熔体温度或增加保压压力和保压时间等措施,可以减小厚度突变处沉降斑,从而减少其对外观质量的影响;因素之间的交互作用对制品沉降斑的形成有一定的影响,熔体温度B和注射时间C之间的交互作用影响较为明显,而保压压力D和注射时间C之间的交互作用对该质量指标的影响最小,可以并入误差。 相似文献