首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 328 毫秒
1.
The recycling of construction and demolition (C&;D) waste as a source of aggregates for the production of new concrete has attracted increasing interests from the construction industry. While the environmental benefits of using recycled aggregates are well accepted, some unsolved problems prevent this type of material from wide application in structural concrete. One of the major problems with the use of recycled aggregates in structural concrete is their high water absorption capacity which leads to difficulties in controlling the properties of fresh concrete and consequently influences the strength and durability of hardened concrete. This paper presents an experimental study on the properties of fresh concrete prepared with recycled aggregates. Concrete mixes with a target compressive strength of 35 MPa are prepared with the use of recycled aggregates at the levels from 0 to 100% of the total coarse aggregate. The influence of recycled aggregate on the slump and bleeding are investigated. The effect of delaying the starting time of bleeding tests and the effect of using fly ash on the bleeding of concrete are explored.  相似文献   

2.
The main objective of this study is to define expedient procedures to estimate the properties of structural concrete that contains recycled aggregates. Experimental results from Portuguese research, most of which supervised by the first author, were used to establish a relationship between some properties of hardened concrete (compressive strength, splitting and flexural tensile strength, modulus of elasticity, abrasion resistance, shrinkage, water absorption, carbonation penetration and chloride penetration) and the density and water absorption of the aggregates’ mixture and also the compressive strength of concrete at the age of 7 days. The workability and density were also analysed for fresh concrete. The graphic analysis of each property shows the relationship between those for recycled aggregate concrete (RAC) mixes and a reference mix using natural aggregates only (RC). The density and water absorption of all the aggregates in the mixture, for each substitution rate, were calculated in order to represent the exact proportion of each type of aggregate (natural and recycled). This method proved to be viable to estimate the variation of the properties of concrete with recycled aggregates by obtaining results for the three parameters mentioned above. This innovative procedure can contribute to increasing the use of recycled aggregates in the construction sector and make it a sustainable activity.  相似文献   

3.
Influence of field recycled coarse aggregate on properties of concrete   总被引:1,自引:0,他引:1  
This paper investigates the influence of different amounts of recycled coarse aggregates obtained from a demolished RCC culvert 15 years old on the properties of recycled aggregate concrete (RAC). A new term called “coarse aggregate replacement ratio (CRR)” is introduced and is defined as the ratio of weight of recycled coarse aggregate to the total weight of coarse aggregate in a concrete mix. To analyze the behaviour of concrete in both the fresh and hardened state, a coarse aggregate replacement ratio of 0, 0.25, 0.50 and 1.0 are adopted in the concrete mixes. The properties namely compressive and indirect tensile strengths, modulus of elasticity, water absorption, volume of voids, density of hardened concrete and depth of chloride penetration are studied. From the experimental results it is observed that the concrete cured in air after 7 days of wet curing shows better strength than concrete cured completely under water for 28 days for all coarse aggregate replacement ratios. The volume of voids and water absorption of recycled aggregate concrete are 2.61 and 1.82% higher than those of normal concrete due to the high absorption capacity of old mortar adhered to recycled aggregates. The relationships among compressive strength, tensile strengths and modulus of elasticity are developed and verified with the models reported in the literature for both normal and recycled aggregate concrete. In addition, the non-destructive testing parameters such as rebound number and UPV (Ultrasonic pulse velocity) are reported. The study demonstrates the potential use of field recycled coarse aggregates (RCA) in concrete.  相似文献   

4.
The recycling of glass waste as a source of aggregate for the production of concrete products has attracted increasing interest from the construction industry. However, the use of recycled glass in architectural mortar is still limited. This study attempts to develop a self-compacting based architectural mortar using white cement and 100% recycled blue glass as key ingredients. To improve the aesthetic qualities, a certain minimum quantity of glass cullets of larger particle size must be present. The influence of particle size of the recycled glass on the engineering properties of fresh and hardened architectural mortar is investigated. The experimental results demonstrate that it is feasible to utilize 100% recycled glass as the aggregate for the production of self-compacting based architectural mortar. These products have an average compressive strength of 40 MPa and flexural strength of 6 MPa at 28 days which are appropriate for some architectural and building applications. Also, the overall performances of all the architectural mortars prepared with different particle sizes of glass aggregates are comparable to those of control mortar mix prepared with river sand.  相似文献   

5.
Fine recycled aggregates are seen as the last choice in recycling for concrete production. Many references quote their detrimental influence on the most important characteristics of concrete: compressive and tensile strength; modulus of elasticity; water absorption; shrinkage; carbonation and chloride penetration. These two last characteristics are fundamental in terms of the long-term durability of reinforced or prestressed concrete. In the experimental research carried out at IST, part of which has already been published, different concrete mixes (with increasing rates of substitution of fine natural aggregates – sand – with fine recycled aggregates from crushed concrete) were prepared and tested. The results were then compared with those for a reference concrete with exactly the same composition and grading curve, but with no recycled aggregates. This paper presents the main results of this research for water absorption by immersion and capillarity, chloride penetration (by means of the chloride migration coefficient), and carbonation resistance, drawing some conclusions on the feasibility of using this type of aggregate in structural concrete, while taking into account any ensuing obvious positive environmental impact.  相似文献   

6.
Many environmental problems caused by the large volumes of construction and demolition waste (C&DW), the lack of adequate deposition sites and the shortage of natural resources have led to the use of C&DW as replacement of natural aggregates in the production of new concrete. As in the case of natural aggregates, when recycled aggregates are used to manufacture structural concrete, the assessment of their physical, mechanical and durable characteristics is a key issue. The different physical and mechanical properties of the recycled coarse aggregate (RCA) are evaluated. RCA was obtained by crushing conventional concretes with different strength levels (different w/c ratios) containing four different types of natural coarse aggregates (three crushed stones and a siliceous gravel), which differ in shape, composition and surface texture. There is a significant influence of the natural coarse aggregate (NCA) on the properties of RCA, which in many cases is greater than that of the w/c ratio of the source concrete.  相似文献   

7.
The increasing amount of waste concrete makes desirable collection of high quality of recycled aggregate from waste concrete to be reused for construction. This research used high grade recycled coarse aggregate (RCA) created using pulsed power technology to make concrete specimens. Concrete created from natural aggregate was also prepared to compare the properties of concrete made using pulsed power recycled aggregate. Established acoustic emission (AE) parameter analyses which are AE hit, relationship between RA value and average frequency, and b-value of AE amplitude distribution were applied to analyze the concrete fracture behavior. In addition, AE Weibull analysis was also proposed to evaluate the reliability of the concrete. A set of AE measurement testing was applied to the concrete specimens during compression loading. At the age of 28 days, compressive strength reaches 35.4 MPa and Young’s modulus is 23.6 GPa. The results indicate that the fracture process and reliability of concrete made using pulsed power RCA is similar to that of natural coarse aggregate concrete suggesting that both concrete have equivalent characteristic under compression. Furthermore, the good agreement results shared by AE Weibull analysis with those of other analyses suggesting this method can also be employed as one parameter to determine the condition of concrete.  相似文献   

8.
This paper reviews the effect of incorporating recycled aggregates, sourced from construction and demolition waste, on the carbonation behaviour of concrete. It identifies various influencing aspects related to the use of recycled aggregates, such as replacement level, size and origin, as well as the influence of curing conditions, use of chemical admixtures and additions, on carbonation over a long period of time. A statistical analysis on the effect of introducing increasing amounts of recycled aggregates on the carbonation depth and coefficient of accelerated carbonation is presented. This paper also presents the use of existing methodologies to estimate the required accelerated carbonation resistance of a reinforced recycled aggregate concrete exposed to natural carbonation conditions with the use of accelerated carbonation tests. Results show clear increasing carbonation depths with increasing replacement levels when recycled aggregate concrete mixes are made with a similar mix design to that of the control natural aggregate concrete. The relationship between the compressive strength and coefficients of accelerated carbonation is similar between the control concrete and the recycled aggregate concrete mixes.  相似文献   

9.
In this research work, High Performance Concrete (HPC) was produced employing 30% of fly ash and 70% of Portland cement as binder materials. Three types of coarse recycled concrete aggregates (RCA) sourced from medium to high strength concretes were employed as 100% replacement of natural aggregates for recycled aggregate concrete (RAC) production. The specimens of four types of concretes (natural aggregate concrete (NAC) and three RACs) were subjected to initial steam curing besides the conventional curing process. The use of high quality RCA (>100 MPa) in HPC produced RAC with similar or improved pore structures, compressive and splitting tensile strengths, and modulus of elasticity to those of NAC. It was determined that the mechanical and physical behaviour of HPC decreased with the reduction of RCA quality. Nonetheless steam-cured RACs had greater reductions of porosity up to 90 days than NAC, which led to lower capillary pore volume.  相似文献   

10.
Very few studies on recycled aggregate concretes (RC) have been extended to the use of recycled ceramic and mixed aggregates in relation with high strength concretes. In the main they concentrate only on the analysis of the physical and mechanical properties. This study deals with the investigation of the influence that different percentages (up to 30% substitution for natural aggregates) of high porous ceramic and mixed recycled aggregates have over the plastic, autogenous and drying shrinkage of the concretes. The physical and mechanical properties as well as the chloride resistance were also determine in order to assess the viability of the use of ceramic and mixed recycled aggregates in high strength concretes. The results revealed that the employment of highly porous recycled aggregates reduced the plastic and autogenous shrinkage values of the concrete with respect to those obtained by conventional concrete (CC). Although the total drying shrinkage of the recycled concrete proved to be 25% higher than that of the CC concrete, the CC concrete had in fact a higher shrinkage value than that of the RC from 7 to 150 days of drying. It can be concluded that the RC concrete produced employing up to 30% of fine ceramic aggregates (FCA, with 12% of absorption capacity) achieved the lowest shrinkage values and higher mechanical and chloride ion resistance. In addition, the concrete produced with low percentage (10–15%) of recycled mixed aggregates also had similar properties to conventional concrete.  相似文献   

11.
Recycling concrete construction waste is a promising way towards sustainable construction. Coarse recycled concrete aggregates have been widely studied in recent years, however only few data have been reported on the use of fine recycled aggregates. Moreover, a lack of reliable data on long-term properties of recycled aggregate concrete has to be pointed out.In this paper the effects of both fine and coarse recycled concrete aggregates on short and long-term mechanical and physical properties of new structural concrete are investigated. The studied concrete mixes have been designed by adjusting and selecting the content and grain size distribution of concrete waste with the goal to obtain medium–high compressive strength with high content of recycled aggregates (ranging from 27% to 63.5% of total amount of aggregates).Time-dependent properties, such as shrinkage and creep, combined with porosity measurements and mechanical investigations are reported as fundamental features to assess structural concrete behavior.  相似文献   

12.
13.
In this paper the bond behavior of recycled aggregate concrete was characterized by replacing different percentages of natural coarse aggregate with recycled coarse aggregate (20, 50 and 100 %). The results made it possible to establish the differences between the conventional concrete bond strength and the recycled concrete bond strength depending on the replacement percentage. It was thus found that bond stress decreases with the increase of the percentage of recycled coarse aggregate used. In order to define the influence of recycled aggregate content on bond behavior, normalized bond strength was calculated taking into account the reduced compressive strength of the recycled concretes. Finally, using the experimental results, a modified expression for maximum bond stress (bond strength) prediction was developed, taking into account replacement percentage and compressive strength. The obtained results show that the equation proposed provides an experimental value to theoretical prediction ratio similar to that of conventional concrete.  相似文献   

14.
再生骨料掺配比对再生透水混凝土性能的影响   总被引:1,自引:0,他引:1       下载免费PDF全文
为研究再生骨料在透水混凝土(RPC)中的应用,选用废弃路面素混凝土块为再生骨料来源,设计2种系列,研究再生骨料透水混凝土中再生骨料掺配问题,即分别以粒径9.5~19.0 mm,再生骨料按0%、25%、50%、75%和100%(基准)质量替代同粒径天然骨料碎石(系列1)和以4.75~9.5 mm、9.5~19.0 mm两种粒径,再生骨料按0∶1、1∶1、1∶2、2∶1、2∶3和3∶2掺比(系列2)制备RPC,并分析其物理、力学、透水性能及其相互关系,得到了合理的再生骨料替代率和双粒级掺比,在1∶1和2∶1掺配下能够得到较好的强度及透水性能。通过切割试块的图像化处理,分析其孔隙分布特征和趋势,并将平面孔隙率、等效孔径和透水系数联系起来。结果表明,再生透水混凝土的透水能力主要取决于截面孔隙个数和面积。  相似文献   

15.
This paper concerns the use of fine recycled concrete aggregates to partially or globally replace natural fine aggregates (sand) in the production of structural concrete. To evaluate the viability of this process, an experimental campaign was implemented in order to monitor the mechanical behaviour of such concrete. The results of the following tests are reported: compressive strength, split tensile strength, modulus of elasticity and abrasion resistance. From these results, it is reasonable to assume that the use of fine recycled concrete aggregates does not jeopardize the mechanical properties of concrete, for replacement ratios up to 30%.  相似文献   

16.
Waste from construction and demolition accumulates in large quantities in the modern world. Recycled coarse aggregates derived from this waste can replace virgin aggregates used in the production of new concretes but the studies on the effect of using the fine fraction of this waste on the properties of new concrete have not yet led to clear conclusions. The present study evaluated the properties of recycled fine aggregates derived from two recycling plants using two different waste treatment procedures, as well as their effects on the properties of fresh and hardened mortars prepared using these aggregates at two water-to-cement ratios and three replacement ratios. It was found that the recycled aggregates were more porous than the natural aggregates and may have contained some organic matter. Setting times were longer when recycled aggregates replaced natural aggregates and strength and durability were reduced as well. Partial replacement of the fine aggregate is possible if an appropriate compensation of the water to cement ratio is applied.  相似文献   

17.
Coarse and fine aggregates generated from crushed concrete products for new concrete can be generally accepted only when the properties of recycled aggregate concrete, in addition to the relationships between different properties of such a concrete, are well understood. The results of an experimental investigation into the relationship of compressive strength to ultrasonic pulse velocity and to rebound number is presented in this paper. It has been observed that for the water-cured concrete the strength-pulse velocity relationship is influenced by the use of the recycled aggregate. For the same value of the pulse velocity, the strength of recycled aggregate concrete is higher than that for the natural aggregate concrete. On the other hand, the strength-rebound number relationship is not affected by the aggregate type used. The combined method of pulse velocity and rebound number for strength estimation is also evaluated.  相似文献   

18.
This paper reports an experimental study to improve the properties of recycled concrete aggregates (RCA) by their impregnation with polyvinyl alcohol (PVA). The effects of PVA on the development of strength and durability properties of the recycled aggregate concrete were evaluated. The experimental investigation was conducted in two parts. Firstly, the optimal concentration of PVA solution required to improve the recycled aggregates was determined. The RCA was soaked in 6%, 8%, 10%, 12% PVA solutions, and impregnation was conducted under a controlled laboratory environment. Density, crushing value (10% fines value), and water absorption of the PVA impregnated RCA (PI-RCA) were determined. Secondly, the slump, slump loss, compressive and tensile splitting strength, dimensional change (shrinkage) and chloride penetrability of the concretes prepared with the RCA that had been impregnated with the optimal (10%) PVA concentration were determined. It was found that the 10% fines value of the PI-RCA was higher, and the water absorption of the PI-RCA were lower when compared to the untreated RCA. The results show that there was not only an improvement in the mechanical properties of the concrete made with PI-RCA, but also the shrinkage of PI-RCA decreased while the resistance to chloride-ion penetration of the concrete produced increased.  相似文献   

19.
为深入研究再生混凝土的破坏形态和内部裂纹扩展情况与普通混凝土之间的差异,以不同再生粗骨料(RCA)取代率的再生混凝土为研究对象,利用Phoenix v | tome | x s240微焦点工业CT获取再生混凝土加载到90%预估破坏荷载的二维扫描图像,借助Photoshop CS6图像处理软件,对材料内部破坏裂纹进行提取,进而基于分形几何理论,以分形维数及多重分形谱表征裂纹的分形扩展规律,建立分形维数和多重分形谱特征参数与RCA取代率和再生混凝土抗压强度的关系。结果表明:再生混凝土的细观受力破坏模式与普通混凝土不同,其受力破坏形态不仅取决于粗骨料与水泥浆体的界面黏结强度,还取决于RCA自身性能,当裂纹发展至天然粗骨料或强度较高的RCA时会绕过骨料表面继续发展,发展至强度较低的RCA时会贯穿骨料;分形维数可定量描述混凝土材料内部细观裂纹的整体扩展情况,即裂纹越丰富,分形维数越大;多重分形谱可反映从局部到整体不同层次的细观裂纹特征,裂纹分形维数和多重分形谱特征参数均与RCA取代率呈线性下降关系,与抗压强度呈线性增长关系;本研究可为再生混凝土在大型结构工程中的广泛应用奠定理论和实验基础。   相似文献   

20.
In this study, the fresh and hardened properties of self-compacting concrete (SCC) using recycled concrete aggregate as both coarse and fine aggregates were evaluated. Three series of SCC mixtures were prepared with 100% coarse recycled aggregates, and different levels of fine recycled aggregates were used to replace river sand. The cement content was kept constant for all concrete mixtures. The SCC mixtures were prepared with 0, 25, 50, 75 and 100% fine recycled aggregates, the corresponding water-to-binder ratios (W/B) were 0.53 and 0.44 for the SCC mixtures in Series I and II, respectively. The SCC mixtures in Series III were prepared with 100% recycled concrete aggregates (both coarse and fine) but three different W/B ratios of 0.44, 0.40 and 0.35 were used. Different tests covering fresh, hardened and durability properties of these SCC mixtures were executed. The results indicate that the properties of the SCCs made from river sand and crushed fine recycled aggregates showed only slight differences. The feasibility of utilizing fine and coarse recycled aggregates with rejected fly ash and Class F fly ash for self-compacting concrete has been demonstrated.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号