Synthesis and Structural Analysis of Structured Triacylglycerols with CLA Isomers in the <Emphasis Type="Italic">sn</Emphasis>-2- Position

The present research deals with the chemical esterification of the sn-2- position of sn-1,3-diacylglycerol (sn-1,3-DAG) with 9cis,11trans (c9,t11) and 10trans,12cis (t10,c12) conjugated linoleic acid (CLA) isomers to obtain structured triacylglycerols (TAG); the sn-1,3-DAG substrates were produced from extra virgin olive oil by means of enzymatic reactions while CLA isomers were obtained using a three-step procedure based on alkaline hydrolysis of sunflower oil, urea purification of linoleic acid (LA) and alkaline isomerization of LA. The results showed good levels of CLA incorporation in structured TAG at the tested temperatures: 37.5% at 4 °C and 39.1% at 14 °C. To evaluate the incorporation of CLA isomers in sn-2- position of sn-1,3-DAG structural analysis of the newly synthesized TAG was carried out using an enzymatic and a chemical method. The results of the structural analysis also showed up the occurrence of acyl migration. The pancreatic lipase method allowed the direct determination of the fatty acid composition of TAG sn-2- position but this enzymatic method showed different results (p < 0.05) in respect to the chemical one; this occurrence could be due to an acylic specificity of the lipase. High incorporation of CLA isomers in sn-2- position of TAG was observed, 77.0% at 4 °C and 81.5% at 14 °C, considering the results of the chemical procedure.     

Study of Some Experimental Parameters in the Synthesis of Triacylglycerols with CLA Isomers and Structural Analysis

The present research deals with the synthesis of structured triacylglycerols (TAG) by enzymatic treatment of sn-1,3-diacylglycerol (sn-1,3-DAG) with conjugated linoleic acid (CLA) isomers using the immobilized lipase from Rhizomucor miehei (Lipozyme^® IM) under different experimental conditions. In particular, the influence of reaction parameters, such as temperature, enzymatic load, reaction time and DAG/CLA ratio has been evaluated using an experimental design software with a screening objective. Two responses have been selected, they are the percentage of CLA isomers in total TAG and in the sn-2- position and a three-level-4-factor fractional factorial experimental design was used to screen the variables. The results showed that the selected experimental variables have an influence on the enzymatic reaction, in particular, the DAG/CLA substrate ratio and the temperature, both of which inversely correlated with CLA incorporation, but also the enzymatic load and the reaction time, both directly correlated with CLA incorporation. The best results for CLA isomer % content both in total TAG (46.3%) and in the sn-2- position (52.2%) were obtained at 40 °C for 96 h, with 20% enzymatic load and a 0.5 reactive ratio.     

Lipase-catalyzed synthesis of structured triacylglycerides from 1,3-diacylglycerides

A new method for the lipase-catalyzed synthesis of structured TAG (ST) is described. First, sn1,3-dilaurin or-dicaprylin were enzymatically synthesized using different published methods. Next, these were esterified at the sn2-position with oleic acid or its vinyl ester using different lipases. Key to successful enzymatic synthesis of ST was the choice of a lipase with appropriate FA specificity, i.e., one that does not act on the FA already present in the sn1,3-DAG, but that at the same time exhibits high selectivity and activity toward the FA to be introduced. Reactions were performed in the presence of organic solvents or in solvent-free systems under reduced pressure. With this strategy, mixed ST containing the desired compounds 1,3-dicaprylol-2-oleyl-glycerol or 1,3-dilauroyl-2-oleyl-glycerol (CyOCy or LaOLa) were obtained at 87 and 78 mol% yield, respectively, using immobilized lipases from Burkholderia cepacia (Amano PS-D) in n-hexane at 60°C. However, regiospecific analysis with porcine pancreatic lipase indicated that in CyOCy, 25.7% caprylic acid and in LaOLa 11.1% lauric acid were located at the sn2-position. Oleic acid vinyl ester was a better acyl donor than oleic acid. Esterification of sn1,3-DAG and free oleic acid gave very low yield (<20%) of ST in a solvent system and moderate yield (>50%) in a solvent-free system under reduced pressure.     

Synthesis of CLA‐enriched TAG by Candida antarctica lipase under vacuum

Conjugated linoleic acid (CLA)‐enriched triacylglycerol (TAG) of 90 wt% was successfully synthesized in 10 h by direct esterification of glycerol and CLA using an immobilized lipase from Candida antarctica under vacuum. The best operating conditions for the synthesis of TAG were investigated according to the three parameters of temperature, enzyme loading, and vacuum. The synthesis of TAG increased with increasing temperature but it did not significantly change above 60°C (p>0.05). The increase of enzyme loading lead to an enhanced conversion of TAG, but enzyme loading of more than 10% (based on the total weight of the substrates) was not effective. Moreover, when vacuum increased, the conversion of TAG increased, but the conversion rate decreased when the vacuum level was too high. The best combination of temperature, enzyme loading, and vacuum level were 60°C, 10% of the total weight of the substrates, and 0.4 kPa, respectively. During the initial 6 h of reaction, Candida antarctica lipase had more selectivity for 10t,12c‐CLA than 9c,11t‐CLA onto the glycerol backbone, and a preference for the incorporation at the sn‐1,3 positions of glycerol rather than at the sn‐2 position.     

Stereospecific analysis of TAG from sunflower seed oil

Stereospecific analysis of TAG from a sunflower seed oil of Tunisian origin was performed. The TAG were first fractionated according to chain length and degree of unsaturation by RP-HPLC. The four major diacid- and triacid-TAG fractions were palmitoyldilinoleoyl-glycerol, dioleoyllinoleoylglycerol, oleoyldilinoleoylglycerol, and palmitoyloleoyl-linoleoyl-glycerol, amounting to 7.2, 16.6, 29.5, and 12 mol%, respectively. The TAG of the four fractions were individually submitted to stereospecific analysis, using a Grignard-based partial deacylation, separation of sn-1,2(2,3)-DAG from sn-1,3-DAG by boric acid-impregnated silica gel TLC plates, conversion of the sn-1,2(2,3)-DAG to their 3,5-dinitrophenylurethane (DNPU) derivatives, fractionation of DNPU derivatives by RP-HPLC, resolution of the DNPU-DAG by HPLC on a chiral column, transmethylation of each sn-DNPU-DAG fraction, and analysis of the resulting FAME by GC. The data obtained were used to determine the triacyl-sn-glycerol composition of the main TAG of the oil. Fifteen triacyl-sn-glycerols were identified and quantified, representing, along with the monoacid-TAG, trilinoleoylglycerol and trioleoylglycerol, more than 90% of the total oil TAG. The two major triacyl-sn-glycerols were trilinoleoyl-glycerol and 1-linoleoyl-2-linoleoyl-3-oleoyl-glycerol (18.6 and 18.5% of the total, respectively). Results clearly identified linoleic acid as the major FA at the sn-2 position, whereas oleic and palmitic acids were the major FA at the sn-3 position. The sn-1 position was occupied to nearly the same extent by linoleic and oleic acids, and to a greater extent by palmitic acid, which was practically absent at the sn-2 position.     

Two-Step Production of Oil Enriched in Conjugated Linoleic Acids and Diacylglycerol

A two-step process was used to produce diacylglycerol-enriched structured lipid that contained mainly c9,t11 and t10,c12 isomers of conjugated linoleic acids (CLA). First, a structured triacylglycerol (TAG) was synthesized by lipase-catalyzed acidolysis of corn oil with CLA. This structured triacylglycerol contained 30.4 mol% CLA with 45.5% of the CLA mostly located at sn-1,3 positions of the glycerol backbone. Then, lipase-catalyzed glycerolysis was conducted between structured triacylglycerol and glycerol to produce diacylglycerol-enriched structured lipid. The final product contained 6.8% monoacylglycerol, 31.5% diacylglycerol and 61.1% TAG after 48 h reaction. The selected chemical (fatty acid composition, the content of mono-, di-, and triacylglycerol in the reaction product) and physical properties (melting profile) were determined by hihg-performance liquid chromatography (HPLC), gas chromatography (GC), and differential scanning calorimetry (DSC).     

Enzymatic preparation of enantiomerically pure sn-2,3-diacylglycerols: A stereoselective ethanolysis approach

Stereoselective ethanolysis of monoacid TAG by immobilized Rhizomucor miehei lipase (RML) was studied for preparation of optically pure sn-2,3-DAG. Trioctanoylglycerol (TO) was used as a model substrate. The enantiomeric purity of the product, sn-2,3-dioctanoylglycerol (sn-2,3-DO), was very high (percent enantiomeric excess >99%) when an excess of ethanol was used. The result indicated that RML was highly stereoselective toward the sn-1 position of TO under conditions of excess ethanol. The stereoselectivity of RML depended on the amount of ethanol. The larger the amount of ethanol was, the higher the stereoselectivity became. After optimizing the parameters such as reactant molar ratio, water content, and temperature, (ethanol/TO molar ratio =31∶1 and water content =7.5 wt% of the reactants at 25°C), optically pure sn-2,3-DO was obtained at 61.1 mol% in the glyceride fraction in 20 min. The above conditions were further applied for ethanolysis of monoacid TAG with different acyl groups such as tridecanoylglycerol (C10∶0), tridodecanoylglycerol (C12∶0), tritetradecanoylglycerol (C14∶0) and trioctadecenoylglycerol [triolein, (C18∶1)]. The yields and enantiomeric purities of 1,2(2,3)-DAG were dramatically reduced when TAG with FA longer than decanoic acid were used.     

Lipase-mediated acidolysis of tristearin with CLA in a packed-bed reactor: A kinetic study

Solvent-free acidolysis of tristearin with CLA has been carried out in a packed-bed reactor. An immobilized lipase from Thermomyces lanuginosa (Lipozyme TL IM) was employed as the biocatalyst. Elevated temperatures (75°C) were utilized to eliminate solid substrates. The reaction kinetics were modeled by using a rate equation of the general Michaelis-Menten form. Both the extent of incorporation of CLA and the extent to which FFA were released were investigated. Positional analysis of the purified TAG obtained after a pseudo space time of 0.6 h indicated that CLA was preferentially incorporated at the sn-1,3 positions of the glycerol backbone, although 10% of the sn-2 positions were occupied by CLA residues. At a pseudo space time of 0.6 h, 38% of the initial CLA was incorporated in acylglycerols; the associated extent of hydrolysis was 8.3%.     

Enzymatic Synthesis of Diacylglycerols Enriched with Conjugated Linoleic Acid by a Novel Lipase from <Emphasis Type="Italic">Malassezia globosa</Emphasis>

Diacylglycerols (DAG) of conjugated linoleic acid (CLA) were prepared by esterification of glycerol with fatty acids enriched with CLA (FFA–CLA, >95%) in the presence of a novel lipase from Malassezia globosa (SMG1). Lipase SMG1 is strictly specific to mono- and diacylglycerols but not triacylglycerols, which is similar to the properties of lipase from Penicillium camembertii (lipase G 50), but lipase SMG1 showed preference on the production of DAG with the reaction proceeding. Low temperature was beneficial for the conversion of FFA–CLA into acylglycerols, the degree of esterification reached 93.0% when the temperature was 5 °C. The maximum DAG content (53.4%) was achieved at 25 °C. The rate of DAG synthesis increased as the enzyme loading increased. However, at lipase amounts above 240 U/g mixtures, no significant increases in DAG concentration were observed. The molar ratio of FFA–CLA to glycerol and initial water content were optimized to be 1:3 (mol/mol) and 3%. Lipase SMG1 showed no regioselectivity because the contents of 1,3-DAG and 1,2-DAG were 43.1% and 21.2% based on total content of acylglycerols. By calculating the ratio of 9c, 11t-CLA to 10t, 12c-CLA, it was indicated that lipase SMG1 showed a little preference to 10t, 12c-CLA at the sn-1(3) position of monoacylglycerols (MAG), while no selectivity for 9c, 11t-CLA at the sn-2 position of DAG was obviously found.     

Synthesis of 1,3-dicapryloyl-2-docosahexaenoylglycerol by a combination of nonselective and <Emphasis Type="Italic">sn</Emphasis>-1,3-selective lipase reactions

A two-step consecutive synthetic method for the production of symmetrical, structured lipids by a combination of nonselective and sn-1,3 regioselective ester exchange reactions was investigated. In the first step, TAG with unspecifically substituted DHA were obtained by reacting tricapryloylglycerol (CCC) with ethyl docosahexanoate (EtDHA) using the lipase QLM (from Alcaligenes sp.), followed by removing the ethyl ester and CCC by molecular distillation. In the second step, sn-1,3 regioselective ester exchange was achieved by reacting the resulting TAG with ethyl caprylate (EtC) using the immobilized lipase Novozyme 435 (Candida antarctica lipase), followed by distillation of the ethyl ester and CCC to give sn-1,3-dicapryloyl-sn-2-docosahexaenoylglycerol (CDC). The acylglycerol composition of CDC was analyzed by GLC, which showed that the content of dicapryloyl-docosahexaenoylglycerols (2CD) in the product was 76.4%, and that the ratio of CDC to sn-1,2-dicapryloyl-sn-3-docosahexaenoylglycerol contained in 2CD was 82.7∶17.3 (%). The distillates CCC, EtDHA, and EtC could be recycled repeatedly to produce CDC as the substrate for the consecutive ester exchange reaction. In addition, separation of CCC and EtDHA was unnecessary for reuse. The present method is considered to meet the requirements for industrial utilization, in which simplicity in scaleup, high yields, compact reaction system, and minimal formation of by-products are important factors.     

Lipase-catalyzed acidolysis of menhaden oil with pinolenic acid

Lipase-catalyzed acidolysis of menhaden oil with a pinolenic acid (PLA) concentrate, prepared from pine nut oil, was studied in a solvent-free system. The PLA concentrate was prepared by urea complexation of the FA obtained by saponification of pine nut oil. Eight commercial lipases from different sources were screened for their ability to catalyze the acidolysis reaction. Two different types of structured lipids (SL) were synthesized. The first type, which has PLA residues as a primary FA residue at the sn-1,3 positions of the TAG, was synthesized using a 1,3-regiospecific lipase, namely, Lipozyme RM IM from Rhizomucor miehei. The second type of SL, which has PLA residues as a primary FA residue at both the sn-1,3 and sn-2 positions of the TAG, was synthesized using a nonspecific lipase, namely, Novozym 435 from Candida antarctica. The effects of variations in enzyme loading, temperature, and reaction time on PLA incorporation into the oil were monitored by GC analyses. The optimal temperature and enzyme loading for synthesis of the two types of SL were 50°C and 10% of the total weight of substrates for both enzymes. The optimal reaction time for the synthesis with Lipozyme RM IM was 16h, whereas the optimal reaction time for the synthesis mediated by Novozym 435 was 36 h. Pancreatic lipase-catalyzed sn-2 positional analyses were also carried out on the TAG samples.     

Parameters affecting diacylglycerol formation during the production of specific-structured lipids by lipase-catalyzed interesterification

Diacylglycerols (DAG) are important intermediates in lipase-catalyzed interesterification, but a high DAG concentration in the reaction mixture results in a high DAG content in the final product. We have previously shown that a high DAG concentration in the reaction mixture increases the degree of acyl migration, thus adding to the formation of by-products. In the present study we examined the influence of water content, reaction temperature, enzyme load, substrate molar ratio (oil/capric acid), and reaction time on the formation of DAG in batch reactors. We used response surface methodology (RSM) to minimize the numbers of experiments. The DAG content of the product was dependent on all parameters examined except reaction time. DAG formation increased with increasing water content, enzyme load, reaction temperature, and substrate ratio. The content of sn-1,3-DAG was higher than that of sn-1,2-DAG under all conditions tested, and the ratio between the contents of the former compounds and the latter increased with increasing temperature and reaction time. The water content, enzyme load, and substrate ratio had no significant effect on this ratio. The DAG content was positively correlated with both the incorporation of acyl donors and the degree of acyl migration.     

Determining the regioselectivity of immobilized lipases in triacylglycerol acidolysis reactions

Lipase regioselectivity is the ability to distinguish between primary (i.e., sn-1,3) and secondary (sn-2) ester functionalities in a triacylglycerol molecule, which is of importance in the manufacture of structured lipids. Unlike existing methods of assessment, which utilize hydrolysis reactions, an alternative technique to assess the regioselectivity of lipases in triacylglycerol transesterification reactions has been developed. An acidolysis reaction is performed between triolein and decanoic, lauric, or stearic acids under conditions that minimize acyl migration, and products are analyzed by silver-ion complexation liquid chromatography, enabling detection of specific triacylglycerol positional isomers. From the rate of formation of these isomers the relative selectivity of the lipase for sn-2 and sn-1,3 ester bonds is determined. With lipases known to lack regioselectivity, the rate of reaction at sn-2 was similar to that at sn-1,3 from the start of the reaction. With sn-1,3 selective lipases, the formation of triacylglycerol isomers with decanoic acid in the secondary position was not detected at any point in the reaction. Regioselectivity as a function of reaction progress was monitored. Two lipases from the genus Pseudomonas exhibited activity toward all positions, but the rate at sn-2 was much reduced, and no incorporation of decanoic acid into this position was detectable until a high degree of conversion had been achieved.     

Lipase-catalyzed incorporation of conjugated linoleic acid into tricaprylin

Three commercially available immobilized lipases, Novozym 435 from Candida antarctica, Lipozyme IM from Rhizomucor miehei, and Lipase PS-C from Pseudomonas cepacia, were used as biocatalysts for the interesterification of conjugated linoleic acid (CLA) ethyl ester and tricaprylin. The reactions were carried out in hexane, and the products were analyzed by gas-liquid chromatography. The effects of molar ratio, enzyme load, incubation time, and temperature on CLA incorporation were investigated. Novozym 435, as compared to Lipozyme IM and Lipase PC-C, showed the highest degree of CLA incorporation into tricaprylin. By hydrolysis with pancreatic lipase, it was found that Lipozyme IM and Lipase PS-C exhibited high selectivity for the sn-1,3 position of the triacylglycerol early in the interesterification, with small extents of incorporation of CLA into the sn-2 position, probably due to acyl migration, at later reaction times. A small extent of sn-1,3 selectivity during interesterification by Novozym 435 was observed.     

Analysis of diastereomeric DAG naphthylethylurethanes by normal-phase HPLC with on-line electrospray MS

Normal-phase HPLC resolution of sn-1,2(2,3)- and x-1,3-DAG generated by partial Grignard degradation from natural TAG was carried out with both (R)-(−) and (S)-(+)-1-(1-naphthyl)ethylurethane derivatives. The diastereomeric sn-1,2- and sn-2,3-DAG derivatives were resolved using two Supelcosil LC-Si (5 μm, 25 cm × 4.6 mm i.d.) columns in series and an isocratic elution with 0.37% isopropanol in hexane at a flow rate of 0.7 mL/min. The DAG were detected by UV absorption at 280 nm and were identified by electrospray ionization MS in the positive ion mode following postcolumn addition of chloroform/methanol/30% ammonium hydroxide (75∶24.5∶0.5, by vol) at 0.6 mL/min. Application of the method to a stereospecific analysis of the molecular species of TAG of rat VLDL showed that the TAG composition of VLDL circulating under basal conditions differs markedly from that of VLDL secreted by the liver during inhibition of serum lipases. The inhibition of serum lipases resulted in a significant proportional decrease in 16∶0 and PUFA and an increase in 18∶0 and oligoenoic FA in the sn-1-position, whereas the FA compositions in the sn-2- and sn-3-positions were much less affected.     

Diacylglycerol acyltransferases from Vernonia and Stokesia prefer substrates with vernolic acid

Genetic engineering of common oil crops for industrially valuable epoxy FA production by expressing epoxygenase genes alone had limited success. Identifying other key genes responsible for the selective incorporation of epoxy FA into seed oil in natural high accumulators appears to be an important next step. We investigated the substrate preferences of acyl CoA: diacylglycerol acyltransferases (DGAT) of two natural high accumulators of vernolic acid, Vernonia galamensis and Stokesia laevis, as compared with a common oilseed crop soybean. Developing seed microsomes were fed with either [¹⁴C]oleoyl CoA or [¹⁴C]vernoloyl CoA in combinations with no exogenous DAG or with 1,2-dioleoyl-sn-glycerol, 1-palmitoyl-2-vernoloyl-sn-glycerol, 1,2-divernoloyl-sn-glycerol, 1,2-dioleoyl-rac-glycerol, or 1,2-divernoloyl-rac-glycerol to determine their relative incorporation into TAG. The results showed that in using sn-1,2-DAG, the highest DGAT activity was from the substrate combination of vernoloyl CoA with 1,2-divernoloyl-sn-glycerol, and the lowest was from vernoloyl CoA or oleoyl CoA with 1,2-dioleoyl-sn-glycerol in both V. galamensis and S. laevis. Soybean DGAT was more active with oleoyl CoA than vernoloyl CoA, and more active with 1,2-dioleoyl-sn-glycerol when oleoyl CoA was fed. DGAT assays without exogenous DAG, or with exogenous sn-1,2-DAG fed individually or simultaneously showed consistent results. In combinations with either oleoyl CoA or vernoloyl CoA, DGAT had much higher activity with rac-1,2-DAG than with their corresponding sn-1,2-DAG, and the substrate selectivity was diminished when rac-1,2-DAG were used instead of sn-1,2-DAG. These studies suggest that DGAT action might be an important step for selective incorporation of vernolic acid into TAG in V. galamensis and S. laevis.     

Triacylglycerol composition of oil from <Emphasis Type="Italic">Pistacia atlantica</Emphasis> fruit growing in Algeria

The distribution of FA between the sn-2 and sn-1,3 positions of TAG from Pistacia atlantica fruit oil of Algeria has been determined. Unsaturated FA showed a preference for the internal position. Linoleic and oleic acids occurred predominantly in the sn-2 position with lesser amounts evenly distributed between the sn-1 and sn-3 positions, as generally found in vegetable oils. The oil was found to contain TAG that were trisaturated (0.93%), disaturated (15.06%), monosaturated (44.64%), and triunsaturated (38.10%). The distribution of the TAG calculated using the lipase hydrolysis technique is slightly different from that determined with HPLC. This is particularly true for trioleoyl and trilinoleoylglycerols. In contrast, the agreement between theory and experiment is good for TAG containing two palmitoyl and one oleoyl, one oleoyl and two linoleoyl, and one palmitoyl and two oleoyl chains.     

Synthesis and Physical Properties of Symmetrical and Non-symmetrical Triacylglycerols Containing Two Palmitic Fatty Acids

A series of symmetrical (ABA) and non-symmetrical (AAB) triacylglycerol (TAG) isomers containing “A,” palmitic (P; 16:0) acid, and “B,” either oleic (O; 9c-18:1), elaidic (E; 9t-18:1), linoleic (L; 9c,12c-18:2) or linolenic (Ln; 9c,12c,15c-18:3) fatty acids were synthesized by esterification of the thermodynamically more-stable 1,3-di- or 1(3)-monoacylglycerols [1,3-DAG or 1(3)-MAG], respectively. 1,3-dipalmitoylglycerol (1,3P-DAG) was esterified with O, L or Ln acid to prepare the symmetrical TAG isomers POP, PLP and PLnP, while the O- E-, L- and Ln-1(3)MAG precursors, synthesized or obtained commercially, were esterified with P acid to prepare the non-symmetrical TAG isomers OPP, EPP, LPP and LnPP, respectively. The drop point(s), solid fat content and melting point values of the synthesized TAG were determined. The 1,3-dipalmitoylglycerol (1,3P-DAG) and 1(3)P-MAG precursors were prepared, in multi-gram quantities, by partial glycerolysis (glycerol/p-toluenesulfonic acid) of tripalmitin. After fractionation by silica gel chromatography, the 1(3)P-MAG and 1,3P-DAG isomers (ca. 80% of total MAG or DAG) were purified (>98%) by crystallization from acetone [silver ion-HPLC was utilized to determine the structural purities of the DAG (or MAG) precursors, and the synthesized TAG]. Esterification of the appropriate, thermodynamically more-stable MAG or DAG precursors was found to be a very versatile method for synthesis (in 80–90% yields) of multi-gram (3–5 g) quantities of symmetrical and non-symmetrical TAG isomers, in chemical and structural purities of >96 and 97–99%, respectively. The 1- and 3- positions on the glycerol backbone of the MAG, DAG and TAG molecules are assumed to be equivalent. Mention of trade names or commercial products in this (publication) is solely for the purpose of providing specific information and does not imply recommendation or endorsement by the US Department of Agriculture.     

Analysis of regiospecific distribution of FA of TAG using the lipase-catalyzed ester-exchange

A very simple and versatile GC method has been developed that can be utilized for quick analysis, in many samples, of the FA compositions at the sn-2- and sn-1,3-positions of TAG. By using the lipase-catalyzed, sn-1,3-regioselective esterexchange reaction of TAG with ethyl acetate, followed by direct injection of the crude reaction mixture into the GC apparatus without any pretreatment, the FA located at the sn-2-position could accurately be analyzed as a TAG derivative in which the sn-1,3-positions were substituted by an acetate residue. Furthermore, the FA located at the sn-1,3-positions could simultaneously be analyzed as the corresponding ethyl ester derivatives using this method. The reliability of the analytical method was compared with conventional methods by analyzing the TAG consisting of caprylic acid (C) at the sn-2-position and oleic acid (O) at the sn-1,3-positions, giving comparable analytical results. The present method was applied to the analysis of the structured lipids CCD and CCE, consisting of TAG as a major component in which C and the highly unsaturated FA, DHA (D) or EPA (E), were specifically bound at the sn-2- and the sn-1,3-positions, respectively.     

Lipolysis of different oils using crude enzyme isolate from the intestinal tract of rainbow trout, <Emphasis Type="Italic">Oncorhynchus mykiss</Emphasis>

Crude enzyme isolate was prepared from the intestine of rainbow trout. Positional specificity of the crude enzyme isolate was determined from both 1(3)- and 2-MAG products after in vitro lipolysis of radioactive-labeled triolein. The ratio of 2-MAG/1(3)-MAG was 2∶1, suggesting that the overall lipase specificity of the enzyme isolate from rainbow trout tended to be 1,3-specific; however, activity against the sn-2 position also was shown. In vitro lipolysis of four different unlabeled oils was performed with the crude enzyme isolate. The oils were: structured lipid [SL; containing the medium-chain FA (MCFA) 8∶0 in the sn-1,3 positions and long-chain FA (LCFA) in the sn-2 position], DAG oil (mainly 1,3-DAG), fish oil (FO), and triolein (TO). MCFA were rapidly hydrolyzed from the SL oil. LCFA including n−3 PUFA were, however, preserved in the sn-2 position and therefore found in higher amounts in 2-MAG of SL compared with 2-MAG of FO, DAG, and TO. Lipolysis of the DAG oil produced higher amounts of MAG than the TAG oils, and 1(3)-MAG mainly was observed after lipolysis of the DAG oil. The positional specificity determined and the results from the hydrolysis of the different oils suggest that n−3 very long-chain PUFA from structured oils may be used better by aquacultured fish than that from fish oils.