Partially aromatic polyamides based on tetraphenylthiophene diamine: Synthesis and characterization

Tetraphenylthiophene diamine (TPTDA) was prepared through a modified three‐step route to achieve an improved overall yield. TPTDA reacted with succinic, adipic, suberic, sebasic, and fumaric acids via the Yamazaki phosphorylation method to yield novel partially aromatic polyamides (TPT series). A counterpart polyamide series based on p‐phenylene diamine (Ph series) was also synthesized under the same conditions. All of the polymers were characterized by means of spectrochemical (Fourier transform infrared spectroscopy, ¹H‐nuclear magnetic resonance (NMR), and ¹³C‐NMR) and thermal (differential scanning calorimetry and thermogravimetric) methods of analysis. Solubility of TPT polyamides was clearly improved due to the presence of the bulky aromatic diamine as well as flexible CH₂—CH₂ segments. The highly phenylated thiophene diamine moiety was recognized to improve thermal stability of the TPT polyamides in comparison with Ph polyamides (integral procedural decomposition temperature (IPDT) 480–517°C against 454–485°C). A favorable balance was recognized in regard to solubility, thermostability, and melting temperature in the TPT polyamides, especially TPT4 and TPT6. Therefore, they may be considered good candidates for processable polymers. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 1144–1153, 2000     

Synthesis and properties of novel benzobisthiazole‐containing hyperbranched polyamides derived from 2,6‐diaminobenzo[1,2‐d:4,5‐d']bisthiazole

In this article, two novel benzobisthiazole‐containing hyperbranched polyamides with different end groups were synthesized, by adjusting the feed molar ratio of the reaction monomers, using 1,3,5‐benzenetricarboxylic acid and 2,6‐diaminobenzo[1,2‐d:4,5‐d']bisthiazole as monomers, polyphosphoric acid as solvent, and catalyst. The molecular structure of the synthesized hyperbranched polymers were speculated by ¹H‐nuclear magnetic resonance (NMR) analysis, ¹³C‐NMR analysis, and Fourier transform infrared analysis. The M_n, M_w, and DB of the carboxyl terminated polymer HB‐COOH are 3264 g/mol, 3350 g/mol, and 44.1%, respectively, with a polydispersity of 1.03. The M_n, M_w, and DB of amino terminated polymer HB‐NH₂ are 3340 g/mol, 3420 g/mol, and 41.7%, respectively, with a polydispersity of 1.02. The thermal stability of HB‐NH₂ was higher than HB‐COOH in the range of 30 °C–800 °C.These two benzobisthiazole‐containing hyperbranched polyamides were completely amorphous and soluble in DMSO. Their DMSO solutions exhibited strong blue fluorescence. The fluorescent intensity of HB‐NH₂ was higher than HB‐COOH. The prepared polymers were potential useful in the area of blue light emitting and display. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43453.     

Synthesis of polyundecamethylene 2,6‐naphthalamide as semiaromatic polyamide‐containing naphthalene ring

A novel engineering plastic polyundecamethylene 2,6‐naphthalamide (PA11N) was prepared via a reaction of 2,6‐naphthalene dicarboxylic acid and 1,11‐undecanediamine through a three‐step procedure. The structure of synthesized PA11N was characterized by elemental analysis, Fourier transform infrared spectroscopy, and proton nuclear magnetic resonance (¹H‐NMR). The thermal behaviors were determined by differential scanning calorimetry, thermogravimetric analysis, and dynamic mechanical analysis. The solubility, water‐absorbing capacity, and mechanical properties of PA11N have also been investigated. Melting temperature (T_m), glass transition temperature (T_g), and decomposition temperature (T_d) of PA11N are 294, 139, and 493°C, respectively. The results show that the heat resistance and mechanical properties of PA11N are near to those of polynonamethylene terephthalamide, and PA11N is a promising heat‐resistant and processable engineering plastic. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis of high performance polyamides utilizing copper‐catalyzed amidation of a dibromoarene with different diamides

A series of diphenylquinoxaline‐containing polyamides were prepared from the condensation polymerization of 2,3‐bis (4‐bromophenyl) quinoxaline (DBQ) with various primary and secondary diamides via copper‐catalyzed amidation reaction. The polyamides were characterized with FTIR, NMR, GPC, differential scanning calorimeter, and thermo gravimetric analysis, and their solubility and viscosity were measured. The polyamides synthesized here are amorphous and showed relatively good solubility in polar aprotic solvents and demonstrate the ability to form brownish hard films by solvent casting; their inherent viscosities ranged from 49 to 55 mL/g. The average molecular weights of polyamides were in the range of M_w = 11,950–5592 g/mol (MWD = 1.21–1.87). These polyamides had relatively high thermal stability with T_g values up to 276°C, 10% weight loss temperatures (T_10%) in the range of 364–476°C, and char yields at 600°C in N₂ up to 72%. They also exhibit emission in the solid state and in dilute (0.2 g/dL) DMAc solution at 425–484 nm with photoluminescence quantum (?_f) yields in the range of 14–23%. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis and characterization of novel Schiff‐base polyamides from copper/benzil bisthiosemicarbazone complexes

A new copper‐containing Schiff‐base diamine, benzil bis(thiosemicarbazonato)copper(II) (CuLH₄), was synthesized in two steps from benzil bisthiosemicarbazone (LH₆). The ligand LH₆ and the complex CuLH₄ were characterized with Fourier transform infrared spectroscopy, ¹H‐NMR, and elemental analysis. CuLH₄ was used to prepare novel polyamides. The low‐temperature solution polycondensation of the complex CuLH₄ with various aromatic and aliphatic diacid chlorides afforded copper‐containing Schiff‐base polyamides with inherent viscosities of 0.25–0.36 dL/g in N,N‐dimethylformamide (DMF) and 0.75 dL/g in H₂SO₄ at 25°C. The polyamides were generally soluble in a wide range of solvents, such as DMF, N,N‐dimethylacetamide, tetrahydrofuran, dimethyl sulfoxide, ethyl acetate, tetrachloroethane, hexamethylene phosphoramide, N‐methylpyrrolidone, and pyridine. Thermal analysis showed that these polyamides were practically amorphous, decomposed above 270°C, and exhibited 50% weight loss at and above 400°C. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Polyamide‐montmorillonite nanocomposites as a drug delivery system: Preparation,release of 1,3,4‐oxa(thia)diazoles,and antimicrobial activity

New microbicidal polyamides were prepared by the reaction of 5‐phenyl‐1,3,4,‐oxadiazole‐2‐thiol, 5‐phenyl‐1,3,4‐oxadiazole‐2‐amine, and 5‐(4‐chlorophenyl)?1,3,4‐thiadiazole‐2‐thiol with ethyl chloroformate followed by polycondensation with polyoxypropylenetriamine (Jeffamine T₄₀₃). The polyamides were modified to yield amine hydrochloride. The intercalation of polyamides into montmorillonite (MMT) was achieved through an ion exchange process between sodium cations in MMT and amine hydrochloride in the polyamides. The structure of the resulting materials was characterized with elemental analysis, proton nuclear magnetic resonance, Fourier transform infrared‐spectroscopy, X‐ray diffraction, thermogravimetric analysis, and transmission electron microscope. The release behavior of 1,3,4‐oxa(thia)diazoles was investigated in buffered aqueous solution at different pH values (2.3, 5.8, and 7.4). A slow release was recorded from the nanocomposites whereas; the release reaches almost 90% from polyamides. The in vitro antimicrobial activity of the polyamides and nanocomposites was studied against Gram‐negative bacteria, Gram‐positive bacteria, Yeast and the filamentous fungi by well diffusion method. The polymers showed good or moderate antimicrobial activities. However, nanocomposites showed no antimicrobial effect. Furthermore, in vivo study showed that nanocomposites had good antimicrobial activity. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41177.     

Enhancement of nonlinear optical and thermal properties of polyurethanes by modifying the chromophores with fused heterocyclic and pyrimidine rings

This article describes the synthesis of substituted triazolo[3,4‐b]‐thiadiazole heterocycles based nonlinear optical (NLO) responsive chromophores. To enhance the NLO properties of the chromophores, the pyrimidine ring was introduced with an appropriate π‐bonding. With these chromophores, different series of polyurethanes were prepared by condensation with tolylene‐2,4‐diisocyanate and 3,3′‐dimethoxy‐4,4′‐biphenylene diisocyanate. The structure of the resulting chromophores and polyurethanes was confirmed using Fourier transform infrared, proton nuclear magnetic resonance, and Carbon Hydrogen Nitrogen (CHN) analyzer. The inherent viscosities (η_inh) of the polyurethanes measured by Ubbelohde viscometer were in the range of 0.2324–0.2760 dl/g. Thermal behavior of the polyurethanes was investigated using differential scanning calorimetry and thermogravimetric analysis. The molecular orientation in polyurethane films was induced by a corona poling, and this was ascertained using ultraviolet‐visible spectrophotometer and atomic force microscope. The thicknesses and refractive indices of thin films were determined by an Ellipsometer. Polyurethanes exhibited excellent solubility in most of the common organic solvents. The second harmonic generation (SHG) coefficients (d₃₃) of the poled polyurethanes ranged from 63.20 and 95.32 pm/V at 532 nm. None of the polyurethanes showed SHG decay below 100°C, and retained 95% of the signal even up to 500 h. The resulting enhanced NLO efficiency and longer temporal stability make these polyurethanes as promising candidates for photonic devices. POLYM. ENG. SCI., 59:500–509, 2019. © 2018 Society of Plastics Engineers     

Synthesis and characterization of acetylene‐terminated polybenzoxazines based on polyaralkyl‐phenolic prepolymer

Xylok polybenzoxazine with acetylene group terminals (XPBZAs) were synthesized by the Mannich‐like condensation of Xylok prepolymer, formaldehyde, aminophenylacetylene, and aniline, and their structures were characterized by Fourier transform infrared spectroscopy (FTIR) and proton nuclear magnetic resonance (¹H NMR). The curing behavior of XPBZAs was determined by differential scanning calorimetry and FTIR. Thermal behavior and dynamic mechanical properties of the cured XPBZAs were investigated using thermogravimetric analysis and dynamic mechanical analysis. The results showed glass transition temperature (T_g), the thermal stability, and anaerobic char residue of cured XPBZAs increased as the content of acetylene groups increased. POLYM. ENG. SCI., 50:1751–1757, 2010. © 2010 Society of Plastics Engineers     

The effect of furan molecular units on the glass transition and thermal degradation temperatures of polyamides

Interfacial polymerization is used to prepare biobased furan polyamides from the carbohydrate‐derived monomer, 2,5‐furan dicarboxylic acid, aromatic diamines, and varying chain length aliphatic diamines. The molecular weights of the furan polyamides variations range 10,000–70,000 g/mol. These biobased polyamides have improved solubility relative to petroleum‐derived polyamides affording enhanced processability options. The glass transition temperatures (T_g) of the biobased furan polyamides are higher than that of aliphatic analogs, but lower than phenyl‐aromatic analogs. The T_g for these furan polyamides are as high as 280 °C. Also, the furan polyamide glass transition temperatures increase with decreasing aliphatic diamine chain length similar to results exemplified in petroleum‐based nylons. Group contribution parameters are determined for furans to enable simple prediction of the glass transition temperature and decomposition temperature of furan polyamides. The molar glass transition function for the furan is calculated to be 27.6 ± 1.5 K kg/mol. Thermal analysis measurements of the biobased furan polyamides have maximum thermal degradation temperatures at 350 °C or higher, similar to that of aliphatic polyamides when scaled with the number average molecular weight. The molar decomposition temperature functions are determined to be 37 K kg/mol for furans bonded to aliphatic units and 42 K kg/mol for furans bonded to phenyl units. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45514.     

Preparation and characterization of a type of ladder‐like poly(phenyl silsesquioxane) based hybrid star‐shaped copolymer of ε‐caprolactone

Combination of the organic–inorganic hybrid such as silsesquioxane with ε‐caprolactone will lead to materials expected to be environmentally friendly and applicable to biomedical usages. A ladder‐like poly(phenyl silsesquioxane) based hybrid star‐shaped copolymer of ε‐caprolactone was prepared by ring opening polymerization of ε‐caprolactone catalyzed by Sn(Oct)₂ with hydroxyl terminated ladder‐like poly(phenyl silsesquioxane) as initiator. The copolymers were characterized by proton nuclear magnetic resonance (¹H‐NMR), silicon nuclear magnetic resonance (²⁹Si‐NMR), Fourier‐transform infrared spectrometer (FT‐IR), size exclusion chromatography (SEC), thermo gravimetric analysis (TGA), and differential scanning calorimetry (DSC) in detail. Furthermore, the enzymatic degradation property of the copolymers was also investigated. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42335.     

Flexible polybenzoxazine thermosets containing pendent aliphatic chains

The rich chemistry of polybenzoxazines allows a wide range of molecular structure design by using appropriate starting materials. A new class of polybenzoxazines has been developed from benzoxazine monomers containing pendent long aliphatic chains. The monomers have been synthesized by the reaction of phenol or bisphenol A with two different long‐chain aliphatic amines. The chemical structure of the monomers was confirmed by ¹H nuclear magnetic resonance and Fourier transform infrared spectroscopy. The polymerization behavior of the monomers studied by differential scanning calorimetry shows exothermic peaks due to the ring‐opening polymerization of benzoxazine monomers centered at 247–255 °C. Dynamic mechanical analysis indicated that the glass transition temperatures T_g were in the range 81–92 °C. The thermal stability of the polymers was also examined by thermogravimetric analysis, demonstrating that the weight loss temperatures decreased in comparison with that of traditional polybenzoxazine. Copyright © 2011 Society of Chemical Industry     

Synthesis and characterization of heat‐resistant N‐phenylmaleimide–styrene–maleic anhydride copolymers and application in acrylonitrile–butadiene–styrene resin

The heat‐resistant copolymer of N‐phenylmaleimide (NPMI)–styrene (St)–maleic anhydride (MAH) was synthesized in xylene at 125°C with di‐tert‐butyl diperoxyterephthalate as an initiator. The characteristics of the copolymer were analyzed by Fourier transform infrared spectroscopy, nuclear magnetic resonance spectroscopy (¹H‐NMR and ¹³C‐NMR), gel permeation chromatography, and elemental analysis. The ¹³C‐NMR results show that the copolymer possessed random sequence distribution; this was also supported by the differential scanning calorimetry experiment, in which a single glass‐transition temperature (T_g) of 202.3°C was observed. The thermal stability and degradation mechanism of the copolymer were investigated by thermogravimetric analysis. Using the Kissinger equation and Ozawa equation, we proved a nucleation controlling mechanism with an apparent activation energy of 144 kJ/mol. Blends of acrylonitrile–butadiene–styrene with the NPMI–St–MAH copolymer with various contents were prepared with a twin‐screw extruder processes. The mechanical and thermal properties of the materials, such as the tensile and flexural strength, T_g's, and Vicat softening temperatures, were all enhanced with the addition of the modifier, whereas the melt flow index decreased. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis and asymmetric nanofiltration membrane performance of heterogeneously sulfonated aromatic polyimides

Soluble sulfonated polyimides (PI) were heterogeneously synthesized by reacting soluble PIs with sulfur trioxide and dichloromethane solvent. The sulfonated PIs were soluble in polar solvents like N‐methyl‐2‐pyrrolidone (NMP) and N,N'‐dimethylformamide. The sulfonated PIs were characterized by Fourier transform infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, differential scanning calorimetry, thermogravimetric analysis, triangular phase diagram, and back titration. Asymmetric nanofiltration membranes were prepared by the phase inversion method from the casting solution containing NMP and diethyleneglycol dimethylether (DGDE). Introducing DGDE as an additive in the casting solution decreased pore size. The rejection rates of organic molecules and salts were investigated. The observed salt rejection of the membrane was of the order R(Na₂SO₄) > R(NaCl) > R(CaCl₂). The membrane morphology was investigated by scanning electron microscopy. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2483–2489, 2003     

Fabrication and characterization of soluble,high thermal,and hydrophobic polyimides based on 4‐(3,5‐dimethoxyphenyl)‐2,6‐bis(4‐aminophenyl)pyridine

A novel aromatic diamine monomer, 4‐(3,5‐dimethoxyphenyl)‐2,6‐bis(4‐aminophenyl)pyridine (DPAP) was successfully synthesized by 4′‐nitroacetophenone and 3,5‐dimethoxybenzaldehyde as raw material. The structure of DPAP was confirmed by Fourier transform infrared, nuclear magnetic resonance, and mass analysis. A series of polyimides (PIs) were obtained by polycondensation with various dianhydrides via the conventional two‐step method. These PIs showed good solubility in organic solvents. They also presented high thermal stability, the glass transition temperatures (T_g) of polymers were in the range of 325–388 °C, and the temperature at 10% weight loss was in the range of 531–572 °C. Furthermore, these polymers also exhibited outstanding hydrophobicity with the contact angles in the range of 89.1°–93.5°. Moreover, the results of wide‐angle X‐ray diffraction (WAXD) confirmed these polymers showed amorphous structure. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45827.     

Development of polyurethanes with azo‐type chromophores for second‐order nonlinear optical applications

Active nonlinear optical nitro‐substituted thiazole, benzothiazole, and thiadiazole chromophores were prepared and condensed with tolylene‐2,4‐diisocyanate (TDI) and 4,4′‐methylenedi(phenyl isocyanate) (MDI) to yield a series of polyurethanes. The resulting polyurethanes were characterized with Fourier transform infrared, proton nuclear magnetic resonance, and ultraviolet–visible spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and gel permeation chromatography. The weight‐average molecular weights of the polyurethanes ranged between 19,500 and 28,000 (weight‐average molecular weight/number‐average molecular weight = 1.71–2.15). All the polyurethanes exhibited excellent solubility in most common organic solvents, and this indicated that these polyurethanes offered good processability. The glass‐transition temperatures (T_g's) of the polyurethanes were in the range of 166–204°C. Among the polyurethanes, chromophores containing the nitrothiazole moiety exhibited lower T_g values in comparison with those of chromophores containing nitrobenzothiazole and nitrothiadiazole moieties. This was attributed to the small size of the nitrothiazole moiety in the polyurethane matrix. The polyurethanes containing a TDI backbone demonstrated relatively high T_g values in comparison with those of the polyurethanes containing an MDI backbone. This was a result of an enhancement of the rigidity caused by the incorporation of a toluene ring into the polyurethane backbone. The second harmonic generation (SHG) coefficients of the poled polyurethane films ranged from 67.29 to 105.45 pm/V at 1064 nm. High thermal endurance of the poled dipoles was observed for all the polyurethanes. This was attributed to the formation of extensive hydrogen bonds between urethane linkages. Furthermore, none of the developed polyurethanes showed SHG decay below 150°C, and this signified their acceptability for nonlinear optical devices. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Facile synthesis of processable aromatic polyamides containing thioether units

Aromatic polyamides containing thioether units were synthesized by interfacial polycondensation of 4,4′‐thiodibenzoyl chloride (or 4,4′‐bis(4‐chloroformylphenylthio)benzene) with aromatic diamines containing a nitrile unit. Their structure was established using ¹H NMR and Fourier transform infrared spectroscopy. The inherent viscosities of the polyamides prepared with optimum synthesis conditions were in the range 0.71–0.84 dL g^?1. These polyamides showed excellent thermal properties with glass transition temperatures of 210.5–219.6 °C, melting temperatures of 313.8–315.0 °C and initial degradation temperatures of 440–459 °C. They could be processed by melting due to their relatively wide processing window. Their tensile strengths were 71.3–79.1 MPa, water absorption was 0.17–0.22 wt%, and melt flowability was in the range 64.5 to 315.2 Pa s and 68.5 to 422.3 Pa s at different shear rates. At the same time, they were soluble in aprotic solvents such as N‐methyl‐2‐pyrrolidone, dimethylformamide and dimethylsulfoxide. The results suggest that these aromatic polyamides containing thioether units represent a promising type of heat‐resistant and processable engineering plastic. © 2012 Society of Chemical Industry     

Novel composite polymer electrolyte membranes based on poly(vinyl phosphonic acid) and poly (5‐(methacrylamido)tetrazole)

Heterocyclic molecules are generally used in the proton conducting membranes as dopant or polymer side group due to their high proton transfer ability. Composite proton conducting membranes based on poly(vinylphosphonic acid) (PVPA) and poly(5‐(methacrylamido)tetrazole) (PMTet) were produced. The homopolymers, prepared from their corresponding monomers, were blended at several mol ratios to obtain the polymer electrolyte membranes. All samples were characterized by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR), thermogravimetric analysis (TGA), differantial scanning calorimetry (DSC), cyclic voltammetry (CV), and impedance analysis. Besides, the morphology of the membranes was studied by X‐ray diffraction (XRD), atomic force microscopy (AFM) and scanning electron microscopy (SEM). FTIR spectra confirmed the formation of hydrogen bonding network between PVPA and PMTet units. TGA showed that the polymer electrolyte membranes were thermally stable up to ～210°C. CV curves demonstrated the oxidative stability of the samples in 3 V region. In anhydrous conditions, the maximum proton conductivity was determined as 0.06 Scm^?1 at 150°C for PMTetP(VPA)₄. POLYM. ENG. SCI., 55:260–269, 2015. © 2014 Society of Plastics Engineers     

Facile synthesis of dendronized polyamides with chloromethyl groups in the periphery and some properties

A novel dendronized aromatic polyamide with a polyamide backbone and chloromethylene‐end‐functionalized polyamide dendrons is reported for the first time. An attempt at a one‐pot synthesis of end‐functionalized dendronized polymers with a macromonomer strategy without protection and deprotection procedures is also reported for the first time. The results from Fourier transform infrared and NMR spectral analysis indicated that perfect coverage of the chloromethyl groups in the periphery of the resulting polymers was obtained. Data from gel permeation chromatography analysis showed a typical weight‐average molecular weight (M_w) of 76,678 and a polydispersity of 2.44 for the first‐generation polymers and an M_w of 41,554 and a polydispersity of 2.74 for the second‐generation polymers. The solubility in solvents for the resulting polymers was improved remarkably because of the introduction of the dendritic fragments and the existence of the periphery functional groups. Both the glass‐transition temperature and onset decomposition temperature decreased versus those of the linear aromatic polyamides, but the 50% weight loss temperature was still up to 723°C. The X‐ray diffractograms indicated only an amorphous peak in the wide‐angle region of 24–25°. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Synthesis,characterization, and thermal degradation of novel poly(2‐(5‐bromo benzofuran‐2‐yl)‐2‐oxoethyl methacrylate)

A novel methacrylate monomer containing benzofuran side group, 2‐(5‐bromo benzofuran‐2‐yl)‐2‐oxoethyl methacrylate (BOEMA), was synthesized from esterification reaction of 2‐bromo‐1‐(5‐bromo benzofuran‐2‐yl) ethanone with sodium methacrylate at 85°C in the presence of 1,4‐dioxane solvent. After characterization with Fourier transform infrared spectrophotometer, nuclear magnetic resonance (¹H‐NMR and ¹³C‐NMR), its homopolymerization was carried out by free radical polymerization at 60°C in the presence of benzoyl peroxide initiator and 1,4‐dioxane solvent. The glass transition temperature (T_g) of the synthesized novel polymer, poly(2‐(5‐bromo benzofuran‐2‐yl)‐2‐oxoethyl methacrylate) [poly(BOEMA)], was determined to be 137°C with differential scanning calorimetry technique. Thermal degradation kinetics of poly(BOEMA) was investigated by thermogravimetric analysis method at different heating rates with 5°C/min intervals between measurements. From dynamic measurements, the analysis of each process mechanism of Coats–Redfern and Van Krevelen methods showed that the most probable model for the decomposition process of poly(BOEMA) homopolymer agrees with the random nucleation, F₁ mechanism. The apparent decomposition activation energies of poly(BOEMA) by Kissinger's and Flynn–Wall–Ozawa methods in the studied conversion range were 188.47 and 180.13 kJ/mol, respectively. POLYM. ENG. SCI., 2012. © 2011 Society of Plastics Engineers     

Synthesis and mesomorphic properties of a new side‐chain,chiral smectic,liquid‐crystalline elastomer

The synthesis of the new chiral monomer 4‐(10‐undecylen‐1‐yloxy)biphenyl‐4′‐[(S)‐2‐methyl‐1‐bu‐ toxy]benzoate (M₁), the nematic crosslinking agent biphenyl 4,4′‐bis(10‐undecylen‐1‐yloxybenzoate) (M₂), and the corresponding liquid‐crystalline elastomer is described. The chemical structures of the chiral monomer and crosslinking agent have been characterized with Fourier transform infrared, elemental analyses, and proton and carbon‐13 nuclear magnetic resonance spectra. The mesomorphic properties have been investigated with differential scanning calorimetry, polarizing optical microscopy, and X‐ray diffraction. Monomer M₁ shows different smectic phases (smectic A, chiral smectic C, and smectic B) and a cholesteric phase, and M₂ exhibits a nematic phase. The liquid‐crystalline elastomer shows smectic A and chiral smectic C phases. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4234–4239, 2006