Effects of TEOS contents on swelling behaviors and mechanical properties of thermosensitive hybrid gels

A series of organic‐inorganic hybrid thermosensitive gels with three different structures and different contents of tetraethoxysilane (TEOS) were prepared from N‐isopropylacrylamide (NIPAAm), and N,N′‐methylene‐bis‐acrylamide (NMBA) and TEOS [N‐IPN]; NIPAAm, 3‐(trimethoxysilyl) propyl methacrylate (TMSPMA) as coupling agent and TEOS [NT‐IPN]; and NIPAAm, TMSPMA and TEOS [NT‐semi‐IPN] by emulsion polymerization and sol‐gel reaction in this study. The effect of TEOS content on the swelling behavior, mechanical properties, and morphologies of the present gels was investigated. Results showed that the properties of the gels would be affected by the gel networks such as IPN or semi‐IPN, existence of TMSPMA as the bridge chain between networks, and content of TEOS. The NT‐semi‐IPN gel had higher swelling ratio because poly (NIPAAm) moiety in the semi‐IPN gels was not restricted by NMBA network. However, the IPN gels such as N‐IPN and NT‐IPN had good mechanical properties and lower swelling ratio, but had bad thermosensitivity due to the addition of coupling agent, TMSPMA, into the gel system that resulted in denser link between organic and inorganic components. Increasing TEOS content would also reduce the thermosensitivity of the hybrid gels. The morphology showed that IPN gels had partial aggregation (siloxane domain) and showed some denser phases. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers     

Preparation and properties of thermosensitive organic‐inorganic hybrid gels containing modified nanosilica

A series of thermosensitive organic–inorganic hybrid gels containing nanosilica or modified nanosilica were prepared from N‐isopropylacrylamide (NIPAAm), and N,N′‐methylene‐bis‐acrylamide (NMBA) and nanosilica (AE200) or modified AE200 (mAE200); and NIPAAm, NMBA, 3‐(trimethoxysilyl) propyl methacrylate (TMSPMA) as coupling agent and AE200 or mAE200 in this study. The effect of inorganic nanosilica on the swelling behaviors and mechanical properties were investigated by adding different amount of nanosilica and modified nanosilica. Results showed that the swelling ratios of the hybrid gels decrease with increasing nanosilica content. Existence of silane coupling agent would also reduce the swelling ratios of the hybrid gels. Adding coupling agent or nanosilica would improve the gel strength. Modification of nanosilica by grafting amino‐silane via sol–gel process was carried out and the effect of addition of modified silica on gel properties was also investigated. Results showed that the hybrid gels containing modified silica would have higher swelling ratios and moduli than those containing unmodified silica. Gels containing both silane coupling agent and silica would have higher crosslinking density because the silica would be better crosslinked with coupling agent. POLYM. COMPOS., 31:1712–1721, 2010. © 2010 Society of Plastics Engineers.     

Studies on preparation and properties of porous biodegradable poly(NIPAAm) hydrogels

A series of biodegradable porous hydrogels, based on thermosensitive N‐isopropylacrylamide (NIPAAm) and biodegradable crosslinker‐polycaprolactone diacrylate (PCLdA) that was synthesized from polycaprolactone diol with acryloyl chloride were prepared by photopolymerization at low temperature. The effect of the crosslinker content and gelation method on the swelling behaviors and physical properties for the poly(NIPAAm) hydrogels was investigated. Results showed that the swelling ratio of the gel in deionized water decreased with an increase of the content of polycaprolactone (PCL) segment in the poly(NIPAAm) hydrogels. The properties of the gels crosslinked with PCLdA were compared with those crosslinked with N, N′‐methylenebisacrylamide (NMBA). The results showed that the critical gel transition temperatures (CGTT) of the gels crosslinked with PCLdA were lower than those of the gels crosslinked with NMBA due to the hydrophobicity of the PCL segment. The results also showed that the gels crosslinked with PCLdA had higher mechanical strength and crosslinking density than those gels crosslinked with NMBA. Comparing the porous gels with nonporous gels, the results showed that the swelling ratio and CGTT of the porous gels were higher than those of the nonporous gels, and the transition temperature curve was smoother for the porous gels. The porous gels also exhibited more rapid thermal response and faster degradation rates. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Preparation of alginate/poly(N‐isopropylacrylamide) semi‐interpenetrating and fully interpenetrating polymer network hydrogels with γ‐ray irradiation and their swelling behaviors

Semi‐interpenetrating polymer network (semi‐IPN) and fully interpenetrating polymer network (full‐IPN) hydrogels composed of alginate and poly(N‐isopropylacrylamide) were prepared with γ‐ray irradiation. The semi‐IPN hydrogels were prepared through the irradiation of a mixed solution composed of alginate and N‐isopropylacrylamide (NIPAAm) monomer to simultaneously achieve the polymerization and self‐crosslinking of NIPAAm. The full‐IPN hydrogels were formed through the immersion of the semi‐IPN film in a calcium‐ion solution. The results for the swelling and deswelling behaviors showed that the swelling ratio of semi‐IPN hydrogels was higher than that of full‐IPN hydrogels. A semi‐IPN hydrogel containing more alginate exhibited relatively rapid swelling and deswelling rates, whereas a full‐IPN hydrogel showed an adverse tendency. All the hydrogels with NIPAAm exhibited a change in the swelling ratio around 30–40°C, and full‐IPN hydrogels showed more sensitive and reversible behavior than semi‐IPN hydrogels under a stepwise stimulus. In addition, the swelling ratio of the hydrogels continuously increased with the pH values, and the swelling processes were proven to be repeatable with pH changes. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4439–4446, 2006     

Thermoreversible hydrogels VI: Swelling behavior of the (N-isopropylacrylamide-co-diethyl methyl methacryloyloxyethyl ammonium iodide) copolymeric hydrogels in aqueous salt solutions

A series of N-isopropylacrylamide/diethyl methyl methacryloyloxyethyl ammonium iodide (NIPAAm/DEMMAI) copolymeric gels were prepared from blending NIPAAm, cationic monomer DEMMAI, and N,N′-methylene bisacrylamide (NMBA) in various molar ratios in this article. The effects of the amount of the cationic monomer in the copolymeric gels on the swelling behaviors in water and various saline solutions at various temperatures were investigated. Results showed that the swelling ratios of copolymeric gels were significantly larger than those of pure NIPAAm gel, and that the more the DEMMAI content, the higher the gel transition temperature. In the saline solution, results showed that the swelling ratio for pure NIPAAm gel had not changed significantly with an increase of the salt concentration until the salt concentration was larger than 0.1 M. The swelling ratios for the copolymeric gels NIPAAm/DEMMAI were decreased with increasing salt concentration. In various saline solutions, results showed that the anionic effects were greater than cationic effects in the presence of common anion with different cations and common cation with different anions for these hydrogels. Finally, we also tested the reversibility of the NIPAAm/DEMMAI copolymeric gels. The deswelling and reswelling kinetics were dependent on the temperature which was below or above the gel transition temperature. The gel with a small DEMMAI content has a good reversibility.     

Thermoreversible hydrogels. VII. Synthesis and swelling behavior of poly(N‐isopropylacrylamide‐co‐3‐methyl‐1‐vinylimidazolium iodide) hydrogels

A series of N‐isopropylacrylamide/3‐methyl‐1‐vinylimidazolium iodide (NIPAAm/MVI) copolymer gels were prepared from the various molar ratios of NIPAAm, cationic monomer MVI, and N,N′‐methylene bisacrylamide (NMBA) in this study. The influence of the amount of MVI in the copolymer gels on the swelling behaviors was investigated in various aqueous saline solutions. Results showed that the swelling ratios (SRs) of copolymer gels were significantly greater than those of NIPAAm homopolymer gels, and the higher the MVI content, the higher the volume phase transition temperature. The SRs for the NIPAAm/MVI copolymer gels decreased with an increase of the salt concentration. In various saline solutions, results showed that the effect of divalent ions on the SR was greater than that of monovalent ions for these hydrogels. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 3242–3253, 1999     

Thermoreversible hydrogel. V. Synthesis and swelling behavior of the N-isopropylacrylamide-co-trimethyl methacryloyloxyethyl ammonium iodide copolymeric hydrogels

A series of N-isopropylacrylamide/trimethyl methacryloyloxyethyl ammonium iodide (NIPAAm/TMMAI) copolymeric gels are prepared from the various molar ratios of NIPAAm, cationic monomer TMMAI, and N,N′-methylene bisacrylamide (NMBA) in this article. The influences of the amount of the cationic monomer in the copolymeric gels on the swelling behavior in water, various saline solutions, and various temperatures are investigated. Results show that the swelling ratios of copolymeric gels are significantly larger than those of pure homopolymer NIPAAm gel, and the more the TMMAI content, the higher the gel transition temperature. In the saline solution, results show that the swelling ratio of pure NIPAAm gel has not significantly changed with an increase of the salt concentration until the salt concentration is larger than 0.1M. The swelling ratios for the copolymeric gels NIPAAm/TMMAI decrease with increasing salt concentration. In various saline solutions, results show that the anionic effects are greater than cationic effects in the presence of common anion, different cations and common cation, and different anions for these hydrogels. Finally, we also tested the reversibility of the NIPAAm/TMMAI copolymeric gels. The deswelling and reswelling kinetics are dependent on the temperature, which is below or above the gel transition temperature. The gel with little TMMAI content has a good reversibility. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 69: 1793–1803, 1998     

Temperature sensitive semi‐IPN microspheres from sodium alginate and N‐isopropylacrylamide for controlled release of 5‐fluorouracil

Semi‐interpenetrating network (IPN) of sodium alginate (NaAlg) and N‐isopropylacrylamide (NIPAAm) microspheres were prepared by water‐in‐oil (w/o) emulsification method. The microspheres were encapsulated with 5‐fluorouracil (5‐FU) and release patterns carried in 7.4 pH at temperatures of 25 and 37°C. The semi‐IPN microspheres were characterized by Fourier transform infrared spectroscopy (FTIR). Differential scanning calorimetry (DSC) and scanning electron microscopic studies were done on the drug‐loaded microspheres to confirm the polymorphism of 5‐FU and surface morphology of microspheres. These results indicated the molecular level dispersion of 5‐FU in the semi‐IPN microspheres. Particle size and size distribution were studied by laser light diffraction technique. Microspheres exhibited release of 5‐FU up to 12 h. The swelling studies were carried in 1.2 and 7.4 pH buffer media at 25 and 37°C. Drug release from NaAlg‐NIPAAm semi‐IPN microspheres at 25 and 37°C confirmed the thermosensitive nature by in vitro dissolution. The micro domains have released in a controlled manner due the presence of NIPAAm in the matrix. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Studies on preparation and swelling properties of the N-isopropylacrylamide/chitosan semi-IPN and IPN hydrogels

Semi-interpenetrating network (semi-IPN) polymer gels and interpenetrating network (IPN) polymer gels with thermosensitivity were prepared by introducing a biodegradable polymer, chitosan, into the N-isopropyacrylamide (PNIPAAm) gel system. The swelling behavior, temperature sensitivity, pH sensitivity, gel strength, and drug-release behavior of PNIPAAm/chitosan semi-IPN and IPN hydrogels were investigated. The results indicated that the NIPAAm/chitosan semi-IPN and IPN hydrogels exhibited pH and temperature-sensitivity behavior and could slow drug release and diffusion from the gels. From the stress–strain curves of the hydrogels, the compression moduli of IPN gels containing crosslinked chitosan were higher than those of semi-IPN gels. This is because IPN gels have a more compact structure. The morphology of PNIPAAm/chitosan hydrogels was also investigated. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 2487–2496, 2001     

Synthesis and swelling behavior of thermosensitive IPN hydrogels based on sodium acrylate and N‐isopropyl acrylamide by a two‐step method

A series of interpenetrating polymer network (IPN) hydrogels having higher swelling ratio (SR) and thermosensitivity were synthesized from sodium acrylate (SA) and N‐isopropyl acrylamide (NIPAAm) by a two‐step method. A series of the porous poly(sodium acrylate ‐co‐1‐vinyl–2‐pyrrolidone) [poly(SA‐co‐VP)], (SV), hydrogels were prepared from acrylic acid having 90% degree of neutralization and VP monomer in the first step. The second step is to immerse the SV dried gels into the NIPAAm solution containing initiator, accelerator, and crosslinker to absorb NIPAAm solution and then polymerized to form the poly(SA‐co‐VP)/poly(NIPAAm) IPN hydrogels (SVN). The effect of the different molar ratios of SA/VP and the content of NIPAAm on the swelling behavior and physical properties of the SVN hydrogels was investigated. Results showed that the SVN hydrogels displayed an obviously thermoreversible behavior when the temperature turns across the critical gel transition temperature (CGTT) of poly(NIPAAm) hydrogel. The pore diameter distributions inside the hydrogel also indicated that the pore sizes inside the SVN hydrogels were smaller than those inside the SV hydrogels. At the same time, the more proportion of SA was added into the hydrogel, the larger pore diameter of the SV hydrogel was formed. The results also showed that the SR decreased with an increase of the VP content in the SV hydrogel and more obviously decreased in the SVN hydrogels. The SVN networks also showed stronger shear moduli than SV hydrogels. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis and properties of silver nanoparticles in chitosan‐based thermosensitive semi‐interpenetrating hydrogels

In this article, thermosensitive poly(N‐isopropyl acrylamide‐co‐vinyl pyrrolidone)/chitosan [P(NIPAM‐co‐NVP)/CS] semi‐interpenetrating (semi‐IPN) hydrogels were prepared by redox‐polymerization using N,N‐methylenebisacrylamide as crosslinker and ammonium persulfate/N,N,N′,N′‐tetramethylethylenediamine as initiator. Highly stable and uniformly distributed Ag nanoparticles were prepared by using the semihydrogel networks as templates via in situ reduction of silver nitrate in the presence of sodium borohydride as a reducing agent. Introduction of CS improves the hydrogels swelling ratio (SR) and stabilizes the formed Ag nanoparticles in networks. Scanning electron microscopy and transmission electron microscopy revealed that Ag nanoparticles were well dispersed with diameters of 10 nm. The semi‐IPN hydrogel/Ag composites had higher SR and thermal stability than its corresponding semi‐IPN hydrogels. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Effect of intercalated hydrotalcite on swelling and mechanical behavior for poly(acrylic acid‐co‐N‐isopropylacrylamide)/hydrotalcite nanocomposite hydrogels

A series of nanocomposite hydrogels were prepared from acrylic acid (AA), N‐isopropylacrylamide (NIPAAm), and intercalated hydrotalcite (IHT) by photopolymerization. The influence of the intercalating content of 2‐acrylamido‐2‐methyl propane sulfonic acid (AMPS) in HT on the swelling and mechanical properties for poly(AA‐co‐NIPAAm)/IHT nanocomposite hydrogels was investigated. The results showed that the higher the content of the AMPS‐HT was, the higher the swelling ratio of the gels and the higher the content of the intercalating agent was, the lower swelling ratio. It was also demonstrated that the swelling ratio of the gel was not affected by the counterion in HT. The gel strength and crosslinking density were not enhanced by adding AMPS‐HT into the gel composition, but the maximum effective crosslink density and shear modulus of the nanocomposite hydrogels were increased with an increase of the content of the intercalating agent in HT. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1572–1580, 2005     

pH–thermoreversible hydrogels. II. Synthesis and swelling behaviors of N-isopropylacrylamide-co-acrylic acid-co-sodium acrylate hydrogels

A series of pH–thermoreversible hydrogels are prepared from the three molar ratios of N-isopropylacrylamide (NIPAAm) and acrylic acid neutralized 50 mol % by sodium hydroxide (SA50) and N,N′-methylene bisacrylamide (NMBA). The influence of the environmental conditions, such as temperature and pH values, on the swelling behavior of these copolymeric gels is also investigated in this article. Results show that the hydrogels bearing negative charges exhibit different equilibrium swelling ratios under various pH media. The pH sensitivities of these gels also strongly depend on the molar ratio of SA50 in the copolymeric gels; thus, the more the SA50 content, the higher the gel pH sensitivity. These hydrogels exhibited thermosensitivity demonstrating a larger change of the equilibrium swelling ratio in aqueous media under temperature changes. An overshooting phenomenon is observed from the gel swelling kinetics under high-temperature conditions. The said hydrogels are also used to investigate the release of model drugs in this study. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 1955–1967, 1999     

Swelling kinetics of modified poly(vinyl alcohol) hydrogels

Interpenetrating polymer network (IPN) hydrogels composed of poly(vinyl alcohol) (PVA) and monomer, N‐isopropylacrylamide (NIPAAm), diallyldimethylammonium chloride (DADMAC), or methacrylic acid (MAA) were prepared by using the sequential‐IPN method. The equilibrium swelling ratios of PVA/NIPAAm (VANP), PVA/DADMAC (VADC), and PVA/MAA (VAMA) are 412, 370, and 297 at 25°C, respectively. VANP had the highest swelling ratio in time‐dependent swelling behavior, whereas the swelling ratio of VAMA had the lowest. The n values of VANP, VADC, and VAMA are 0.72, 0.81, and 0.96, respectively. Transport of all IPN hydrogels is anomalous and their transport mechanisms are dominated by a combination of diffusion‐controlled and relaxation‐controlled systems. VAMA has the highest activation energy and VANP has the lowest activation energy. The values of all IPN hydrogels are from 4.66 to 16.49 kJ/mol, which proves that all IPN hydrogels are hydrophilic. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3310–3313, 2003     

Preparation and characterization of thermosensitive poly(N‐isopropylacrylamide)/poly(ethylene oxide) semi‐interpenetrating polymer networks

Temperature‐sensitive poly(N‐isopropylacrylamide) hydrogels were successfully synthesized by using poly(ethylene oxide) as the interpenetrating agent. The newly prepared semi‐interpenetrating polymer network (semi‐IPN) hydrogels exhibited much better properties as temperature‐sensitive polymers than they did in the past. Characterizations of the IPN hydrogels were investigated using a swelling experiment, FTIR spectroscopy, and differential scanning calorimetry (DSC). Semi‐IPN hydrogels exhibited a relatively high temperature dependent swelling ratio in the range of 23–28 at room temperature. DSC was used for the determination of the lower critical solution temperature of the semi‐IPN hydrogel. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3032–3036, 2003     

Thermoreversible hydrogels X: Synthesis and swelling behavior of the (N‐isopropylacrylamide‐co‐sodium 2‐acrylamido‐2‐methylpropyl sulfonate) copolymeric hydrogels

A series of thermosensitive hydrogels were prepared from various molar ratios of N‐isopropylacrylamide (NIPAAm) and sodium‐2‐acrylamido‐2‐methylpropyl sulfonate (NaAMPS). Factors such as temperature and initial total monomer concentration and different pH solutions were investigated. Results indicated that the more the NaAMPS content in hydrogel system, the higher the swelling ratio and the gel transition temperature; the higher the initial monomer concentration, the lower the swelling ratio. The result also indicated that the NIPAAm/NaAMPS copolymeric hydrogels had different swelling ratios in various pH environments. The present gels showed a pH‐reversible property between pH 3 and pH 10 and thermoreversibility. The swelling ratios of copolymeric gels were lower in a strong alkaline environment because the gels were screened by counterions. Finally, the drug release behavior of these gels was also investigated in this article. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 1760–1768, 2000     

Synthesis of full and semi Interpenetrating hydrogel from polyvinyl alcohol and poly (acrylic acid‐co‐hydroxyethylmethacrylate) copolymer: Study of swelling behavior,network parameters,and dye uptake properties

Semi and full interpenetrating network (IPN) hydrogels were synthesized by allowing free radical copolymerization of acrylic acid (AA) and hydroxyethyl methacrylate (HEMA) in the matrix of polyvinyl alcohol (PVOH). Accordingly, four different semi IPN hydrogels were prepared with PVOH: copolymer mass ratio of 1 : 1, 1 : 0.75, 1 : 0.5, and 1 : 0.25. These hydrogels were designated as SEMIIPN1, SEMIIPN2, SEMIIPN3, and SEMIIPN4, respectively. In all of these SEMIIPN, after polymerization PVOH was crosslinked with 2 mass % glutaraldehyde to form the semi IPN structure. In a similar way, sequential full IPN were prepared from PVOH and copolymer of AA and HEMA (designated as PAAHEMA) with same composition except in this case apart from crosslinking of PVOH by 2 mass % glutaraldehyde the PAAHEMA copolymer was further crosslinked with N,N′‐methylenebisacrylamide (NMBA) to produce four full IPN hydrogels designated as FULLIPN1, FULLIPN2, FULLIPN3, and FULLIPN4. All of these semi and full IPN type hydrogels were characterized by carboxylic %, FTIR, UV, DTA‐TGA, XRD, SEM, and mechanical properties. The network parameters, swelling and diffusion characteristics of these hydrogels were also studied. The performance of these semi and full IPNs were compared in terms of their relative abilities for removing varied concentration of rhodamine B (RB) and methyl Violet (MV) dyes from water. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Thermo‐ and pH‐responsive behaviors of graft copolymer and blend based on chitosan and N‐isopropylacrylamide

Thermo‐ and pH‐sensitive polymers were prepared by graft polymerization or blending of chitosan and poly(N‐isopropylacrylamide) (PNIPAAm). The graft copolymer and blend were characterized by Fourier transform‐infrared, thermogravimetric analysis, X‐ray diffraction measurements, and solubility test. The maximum grafting (%) of chitosan‐g‐(N‐isopropylacrylamide) (NIPAAm) was obtained at the 0.5 M NIPAAm monomer concentration, 2 × 10⁻³ M of ceric ammonium nitrate initiator and 2 h of reaction time at 25°C. The percentage of grafting (%) and the efficiency of grafting (%) gradually increased with the concentration of NIPAAm up to 0.5 M, and then decreased at above 0.5 M NIPAAm concentration due to the increase in the homopolymerization of NIPAAm. Both crosslinked chitosan‐g‐NIPAAm and chitosan/PNIPAAm blend reached an equilibrium state within 30 min. The equilibrium water content of all IPN samples dropped sharply at pH > 6 and temperature > 30°C. In the buffer solutions of various pH and temperature, the chitosan/PNIPAAm blend IPN has a somewhat higher swelling than that of the chitosan‐g‐NIPAAm IPN. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 1381–1391, 2000     

Preparation of interpenetrating polymer network gel beads for dye absorption

Preparation of interpenetrating polymer network (IPN) gel beads for dye absorption was carried out by using simultaneous crosslinking method. First, sodium alginate (SA), 3‐(methacrylamido) propyl trimethyl ammonium chloride (MAPTAC), and/or acrylamide (AM), K₂S₂O₈, and N,N′‐methylenebisacrylamide (MBAM) were mixed in aqueous solution. The beads were prepared using K₂S₂O₈ and MBAM as the initiator and crosslinking agent, respectively. Then, the solution was dropped into CaCl₂ solution mixed with N,N,N′,N′‐tetramethylethylenediamine (TMEDA). The former was used as the crosslinking agent of alginate and the latter was used as the accelerator for the polymerization of monomer in the alginate solution. The gel bead composed of only alginate was also prepared to compare the properties with IPN gel bead. The components in IPN gel bead were examined by FTIR analysis. The factors effecting the particle size of alginate and IPN gel beads were investigated. In alginate gel bead, the concentration of solution affected the particle size, whereas type of monomer affected the particle size of IPN gel bead. The IPN gel bead had smooth surface (from SEM results), different from the alginate bead. Alginate content caused the swelling behavior of dried IPN beads. Cationic dye was absorbed by crosslinked alginate gel bead. The absorption of reactive dye by IPN gel bead was a result of its cationic charge. The absorption density of IPN gel beads was the reciprocal of the absorbent dosage. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1585–1591, 2006     

Effect of the intercalation agent content of montmorillonite on the swelling behavior and drug release behavior of nanocomposite hydrogels

A series of novel dual functional nanocomposite hydrogels were prepared from N‐isopropylacrylamide (NIPAAm), acrylic acid (AA) that is neutralized 50 mol % by sodium hydroxide (SA50), and montmorillonite (MMT). MMT was intercalated with three different contents of intercalation agent of (3‐acrylamidopropyl) trimethyl ammonium chloride (TMAACl). Investigation of the effect of intercalated MMT with three contents of intercalation agent (TMAACl) in the present nanocomposite hydrogels on the swelling and drug release behaviors is the main purpose in this study. The microstructure was identified by X‐ray diffraction (XRD). Results showed that the swelling ratio for the present nanocomposite hydrogels decreased with an increase in the content of the intercalation agent. The gel strength of the present gels did not change obviously with an increase in the content of intercalation agent. XRD results indicated that exfoliation of MMT was achieved in the dry and swollen gel state. Finally, the drug release behaviors for these gels were accessed also. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 74–82, 2004