Temperature‐Induced Hydrogels Through Self‐Assembly of Cholesterol‐Substituted Star PEG‐b‐PLLA Copolymers: An Injectable Scaffold for Tissue Engineering

Partially cholesterol‐substituted 8‐arm poly(ethylene glycol)‐block‐poly(L ‐lactide) (8‐arm PEG‐b‐PLLA‐cholesterol) has been prepared as a novel star‐shaped, biodegradable copolymer derivative. The amphiphilic 8‐arm PEG‐b‐PLLA‐cholesterol aqueous solution (polymer concentration, above 3 wt%) exhibits instantaneous temperature‐induced gelation at 34 °C, but the virgin 8‐arm PEG‐b‐PLLA does not, irrespective of concentration. Moreover, an extracellular matrix (ECM)‐like micrometer‐scale network structure has been created with favorable porosity for three‐dimensional proliferation of cells inside the hydrogel. This network structure is mainly attributed to specific self‐assembly between cholesterol groups. The 10 and 20 wt% hydrogels are eroded gradually in phosphate buffered saline at 37 °C over the course of a month, and after that the gel becomes completely dissociated. Moreover, L929 cells encapsulated into the hydrogel are viable and proliferate three‐dimensionally inside the hydrogels. Thus, in‐vitro cell culture studies demonstrate that 8‐arm PEG‐b‐PLLA‐cholesterol is a promising candidate as a novel injectable cellular scaffold.     

Direct‐Write Assembly of Microperiodic Silk Fibroin Scaffolds for Tissue Engineering Applications

Three–dimensional, microperiodic scaffolds of regenerated silk fibroin have been fabricated for tissue engineering by direct ink writing. The ink, which consisted of silk fibroin solution from the Bombyx mori silkworm, was deposited in a layer‐by‐layer fashion through a fine nozzle to produce a 3D array of silk fibers of diameter 5 µm. The extruded fibers crystallized when deposited into a methanol‐rich reservoir, retaining a pore structure necessary for media transport. The rheological properties of the silk fibroin solutions were investigated and the crystallized silk fibers were characterized for structure and mechanical properties by infrared spectroscopy and nanoindentation, respectively. The scaffolds supported human bone marrow‐derived mesenchymal stem cell (hMSC) adhesion, and growth. Cells cultured under chondrogenic conditions on these scaffolds supported enhanced chondrogenic differentiation based on increased glucosaminoglycan production compared to standard pellet culture. Our results suggest that 3D silk fibroin scaffolds may find potential application as tissue engineering constructs due to the precise control of their scaffold architecture and their biocompatibility.     

User‐Friendly Universal and Durable Subcellular‐Scaled Template for Protein Binding: Application to Single‐Cell Patterning

A new method for subcellular‐sized protein patterning on a SiOx substrate is demonstrated by dip‐pen nanolithography printed aldehyde‐terminated alkylsilane template. The aldehyde‐silane template is stable and durable; for example, subcellular scaled IgG protein array can be obtained using one‐year old aldehyde‐silane template. Moreover, single cell patterning is successfully carried out by extracellular material (ECM) protein microarray and nanoarray fabricated on an aldehyde‐silane template. With more than half of chance, single‐ or double‐cells are successfully attached on fibronectin protein nanoarrays in 21 × 21 μm ² (7 × 7 dot array) and 42 × 42 μm² (14 × 14 dot array). The fibronectin nanoarray with small area (21 × 21 μm²) shows the more rate of single cell attachment. Therefore, it is also demonstrated that cell patterning can be controlled by adjusting the nanostructure of ECM materials.     

A Stimuli‐Responsive Nanocomposite for 3D Anisotropic Cell‐Guidance and Magnetic Soft Robotics

Stimuli‐responsive materials have the potential to enable the generation of new bioinspired devices with unique physicochemical properties and cell‐instructive ability. Enhancing biocompatibility while simplifying the production methodologies, as well as enabling the creation of complex constructs, i.e., via 3D (bio)printing technologies, remains key challenge in the field. Here, a novel method is presented to biofabricate cellularized anisotropic hybrid hydrogel through a mild and biocompatible process driven by multiple external stimuli: magnetic field, temperature, and light. A low‐intensity magnetic field is used to align mosaic iron oxide nanoparticles (IOPs) into filaments with tunable size within a gelatin methacryloyl matrix. Cells seeded on top or embedded within the hydrogel align to the same axes of the IOPs filaments. Furthermore, in 3D, C2C12 skeletal myoblasts differentiate toward myotubes even in the absence of differentiation media. 3D printing of the nanocomposite hydrogel is achieved and creation of complex heterogeneous structures that respond to magnetic field is demonstrated. By combining the advanced, stimuli‐responsive hydrogel with the architectural control provided by bioprinting technologies, 3D constructs can also be created that, although inspired by nature, express functionalities beyond those of native tissue, which have important application in soft robotics, bioactuators, and bionic devices.     

Spatio‐Temporal Control of Dynamic Topographic Patterns on Azopolymers for Cell Culture Applications

Cell response to exogenous cues is the result of a complex integration of multiple biochemical/biophysical signals, which might occur simultaneously and might be characterized by specific spatial and temporal patterns. Among these signals, surface topography plays an important role in affecting cell functions and fate. However, the current understanding of the interplay between cells and topography relies on static environment. Here the intrinsic light‐responsive properties of azopolymers and the versatility of laser‐based confocal microscope technique is exploited, aiming to induce spatio‐temporal dynamic topographic changes in situ during cell culture. Diverse patterns can be designed on cell‐populated azopolymer films with high control on time, space, and on‐off signal modification. The technique proposed in this study enables the development of synthetic platforms that finely control cell orientation and migration both in time and space. The results may pave the way to unravel complex processes involved in cell‐topography interactions, thus allowing to define the spatio‐temporal features that most effectively influence cell functions.     

Bio‐Orthogonally Crosslinked,Engineered Protein Hydrogels with Tunable Mechanics and Biochemistry for Cell Encapsulation

Covalently‐crosslinked hydrogels are commonly used as 3D matrices for cell culture and transplantation. However, the crosslinking chemistries used to prepare these gels generally cross‐react with functional groups present on the cell surface, potentially leading to cytotoxicity and other undesired effects. Bio‐orthogonal chemistries have been developed that do not react with biologically relevant functional groups, thereby preventing these undesirable side reactions. However, previously developed biomaterials using these chemistries still possess less than ideal properties for cell encapsulation, such as slow gelation kinetics and limited tuning of matrix mechanics and biochemistry. Here, engineered elastin‐like proteins (ELPs) are developed that crosslink via strain‐promoted azide‐alkyne cycloaddition (SPAAC) or Staudinger ligation. The SPAAC‐crosslinked materials form gels within seconds and complete gelation within minutes. These hydrogels support the encapsulation and phenotypic maintenance of human mesenchymal stem cells, human umbilical vein endothelial cells, and murine neural progenitor cells. SPAAC‐ELP gels exhibit independent tuning of stiffness and cell adhesion, with significantly improved cell viability and spreading observed in materials containing a fibronectin‐derived arginine‐glycine‐aspartic acid (RGD) domain. The crosslinking chemistry used permits further material functionalization, even in the presence of cells and serum. These hydrogels are anticipated to be useful in a wide range of applications, including therapeutic cell delivery and bioprinting.     

FeP Quantum Dots Confined in Carbon‐Nanotube‐Grafted P‐Doped Carbon Octahedra for High‐Rate Sodium Storage and Full‐Cell Applications

Transition metal phosphides (TMPs) possess high theoretical sodium storage capacities, but suffer from poor rate performance, due to their intrinsic low conductivity and large volume expansion upon sodiation/desodiation. Compositing TMPs with carbon materials or downsizing their feature size are recognized as efficient approaches to address the above issues. Nevertheless the surface‐controlled capacitive behavior is generally dominated, which inevitably compromises the charge/discharge platform, and decreases the operational potential window in full‐cell constructions. In this work, a novel architecture (FeP@OCF) with FeP quantum dots confined in P‐doped 3D octahedral carbon framework/carbon nanotube is rationally designed. Such structure enables a simultaneous enhancement on the diffusion‐controlled capacity in the platform region (2.3 folds), and the surface‐controlled capacity in the slope region (2.9 folds) as compared to that of pure FeP. As a result, an excellent reversible capacity (674 mAh g^?1@ 0.1 A g^?1) and a record high‐rate performance (262 mAh g^?1 @ 20 A g^?1) are achieved. A full‐cell FeP@OCF// Na₃V₂(PO₄)₃ is also constructed showing an outstandingly high energy density of 185 Wh kg^?1 (based on the total mass of active materials in both electrodes), which outperforms the state‐of‐the art TMP‐based sodium‐ion battery full cells.     

Photogenerated Aldehydes for Protein Patterns on Hydrogels and Guidance of Cell Behavior

The immobilization of proteins to hydrogels is important and plays a significant role to provide suitable biomimetic material as extracellular matrix for cell behavior mediation. This study describes a novel and universal strategy for photopatterning unmodified proteins on hydrogels. The methodology creates photogenerated aldehyde regions within a protein‐resistant hydrogel and then conjugates unmodified proteins by mild imine ligation with spatial, temporal, and dosage control. The relatively stable aldehyde intermediate enables the facile and highly efficient covalent immobilization of proteins by a postfunctionalization methodology and the sequential protein patterns provide an easy access to control the identity and dynamic change of proteins presented to cells on demand, thus mediating cell behaviors. This approach provides important opportunities for understanding and controlling cell behavior mediated by proteins, and opens up new avenues for hydrogels in tissue engineering and biotechnology applications.     

Three Electron Reversible Redox Reaction in Sodium Vanadium Chromium Phosphate as a High‐Energy‐Density Cathode for Sodium‐Ion Batteries

A sodium‐ion battery operating at room temperature is of great interest for large‐scale stationary energy storage because of its intrinsic cost advantage. However, the development of a high capacity cathode with high energy density remains a great challenge. In this work, sodium super ionic conductor‐structured Na₃V_2?xCr_x(PO₄)₃ is achieved through the sol–gel method; Na₃V_1.5Cr_0.5(PO₄)₃ is demonstrated to have a capacity of 150 mAh g^?1 with reversible three‐electron redox reactions after insertion of a Na⁺, consistent with the redox couples of V²⁺/³⁺, V³⁺/⁴⁺, and V⁴⁺/⁵⁺. Moreover, a symmetric sodium‐ion full cell utilizing Na₃V_1.5Cr_0.5(PO₄)₃ as both the cathode and anode exhibits an excellent rate capability and cyclability with a capacity of 70 mAh g^?1 at 1 A g^?1. Ex situ X‐ray diffraction analysis and in situ impedance measurements are performed to reveal the sodium storage mechanism and the structural evolution during cycling.     

Progression‐Preserving Dimension Reduction for High‐Dimensional Sensor Data Visualization

This letter presents Progression‐Preserving Projection, a dimension reduction technique that finds a linear projection that maps a high‐dimensional sensor dataset into a two‐ or three‐dimensional subspace with a particularly useful property for visual exploration. As a demonstration of its effectiveness as a visual exploration and diagnostic means, we empirically evaluate the proposed technique over a dataset acquired from our own virtual‐reality‐enhanced ball‐intercepting training system designed to promote the upper extremity movement skills of individuals recovering from stroke‐related hemiparesis.     

Highly Efficient Self‐Healable and Dual Responsive Cellulose‐Based Hydrogels for Controlled Release and 3D Cell Culture

To face the increasing demand of self‐healing hydrogels with biocompatibility and high performances, a new class of cellulose‐based self‐healing hydrogels are constructed through dynamic covalent acylhydrazone linkages. The carboxyethyl cellulose‐graft‐dithiodipropionate dihydrazide and dibenzaldehyde‐terminated poly(ethylene glycol) are synthesized, and then the hydrogels are formed from their mixed solutions under 4‐amino‐DL‐phenylalanine (4a‐Phe) catalysis. The chemical structure, as well as microscopic morphologies, gelation times, mechanical and self‐healing performances of the hydrogels are investigated with ¹H NMR, Fourier transform infrared spectroscopy, atomic force microscopy, rheological and compression measurements. Their gelation times can be controlled by varying the total polymer concentration or 4a‐Phe content. The resulted hydrogels exhibit excellent self‐healing ability with a high healing efficiency (≈96%) and good mechanical properties. Moreover, the hydrogels display pH/redox dual responsive sol‐gel transition behaviors, and are applied successfully to the controlled release of doxorubicin. Importantly, benefitting from the excellent biocompatibility and the reversibly cross‐linked networks, the hydrogels can function as suitable 3D culture scaffolds for L929 cells, leading to the encapsulated cells maintaining a high viability and proliferative capacity. Therefore, the cellulose‐based self‐healing hydrogels show potential applications in drug delivery and 3D cell culture for tissue engineering.     

Double‐Sided Surface Passivation of 3D Perovskite Film for High‐Efficiency Mixed‐Dimensional Perovskite Solar Cells

Defect‐mediated carrier recombination at the interfaces between perovskite and neighboring charge transport layers limits the efficiency of most state‐of‐the‐art perovskite solar cells. Passivation of interfacial defects is thus essential for attaining cell efficiencies close to the theoretical limit. In this work, a novel double‐sided passivation of 3D perovskite films is demonstrated with thin surface layers of bulky organic cation–based halide compound forming 2D layered perovskite. Highly efficient (22.77%) mixed‐dimensional perovskite devices with a remarkable open‐circuit voltage of 1.2 V are reported for a perovskite film having an optical bandgap of ≈1.6 eV. Using a combination of experimental and numerical analyses, it is shown that the double‐sided surface layers provide effective defect passivation at both the electron and hole transport layer interfaces, suppressing surface recombination on both sides of the active layer. Despite the semi‐insulating nature of the passivation layers, an increase in the fill factor of optimized cells is observed. The efficient carrier extraction is explained by incomplete surface coverage of the 2D perovskite layer, allowing charge transport through localized unpassivated regions, similar to tunnel‐oxide passivation layers used in silicon photovoltaics. Optimization of the defect passivation properties of these films has the potential to further increase cell efficiencies.     

High‐Density Hotspots Engineered by Naturally Piled‐Up Subwavelength Structures in Three‐Dimensional Copper Butterfly Wing Scales for Surface‐Enhanced Raman Scattering Detection

Very recently, wing scales of natural Lepidopterans (butterflies and moths) manifested themselves in providing excellent three dimensional (3D) hierarchical structures for surface‐enhanced Raman scattering (SERS) detection. But the origin of the observed enormous Raman enhancement of the analytes on 3D metallic replicas of butterfly wing scales has not been clarified yet, hindering a full utilization of this huge natural wealth with more than 175 000 3D morphologies. Herein, the 3D sub‐micrometer Cu structures replicated from butterfly wing scales are successfully tuned by modifying the Cu deposition time. An optimized Cu plating process (10 min in Cu deposition) yields replicas with the best conformal morphologies of original wing scales and in turn the best SERS performance. Simulation results show that the so‐called “rib‐structures” in Cu butterfly wing scales present naturally piled‐up hotspots where electromagnetic fields are substantially amplified, giving rise to a much higher hotspot density than in plain 2D Cu structures. Such a mechanism is further verified in several Cu replicas of scales from various butterfly species. This finding paves the way to the optimal scale candidates out of ca. 175 000 Lepidopteran species as bio‐templates to replicate for SERS applications, and thus helps bring affordable SERS substrates as consumables with high sensitivity, high reproducibility, and low cost to ordinary laboratories across the world.     

High‐Resolution Patterning of Various Large‐Area,Highly Ordered Structural Motifs by Directional Photofluidization Lithography: Sub‐30‐nm Line,Ellipsoid, Rectangle,and Circle Arrays

A major challenge in nanolithography is to overcome the resolution limit of conventional patterning methods. Herein, we demonstrate a simple and convenient approach to generate sub‐30‐nm various structural motifs with precisely controlled sizes, shapes, and orientations. The proposed method, the “directional photofluidization” of an azopolymer, follows the same philosophy as a path‐changing approach, for example, thermal‐reflow of polymer arrays, in that post‐treatment simultaneously leads to a reduction of the feature sizes and line‐edge roughness (LER) of nanostructures. However, in contrast to thermal‐induced isotropic reflow, directional photofluidization provides unprecedented flexibility to control the structural features, because the direction of photofluidization can be arbitrary controlled according to the light polarization. Furthermore, this approach offers good control of the final features due to a gradual reduction in the rate of photofluidization during light irradiation. More importantly, the photofluidic behavior of the azopolymer significantly reduces the LER, and thus it can improve the quality of nanostructures. Finally, the far‐field process of directional photofluidization enables hierarchical nanofabrication, in contrast to mechanical contact fabrication, because the patterned light can reconfigure the polymer arrays selectively. Our approach is potentially advantageous for the fabrication of various structural motifs with well‐controlled dimensions on the nanoscale and with minimized LER.     

Cell Adhesion and Cellular Patterning on a Self‐Assembled Monolayer of Zeolite L Crystals

Chemically functionalized self‐assembled monolayers made by disk‐shaped zeolite L nanocrystals are used as models for biocompatible surfaces to study cell‐adhesion behavior. Different chemical groups lead to different cellular behavior and fluorescent‐molecule‐loaded zeolites allow the position of the cells to be determined. Furthermore, a patterned monolayer of asymmetrically functionalized zeolite L obtained by microcontact chemistry is used to grow cells. A spatial recognition of the cells, which proliferate only on the bioactive‐molecule‐functionalized stripes, is possible.     

High‐Resolution Near‐Field Optical Investigation of Crystalline Domains in Oligomeric PQT‐12 Thin Films

The structure and morphology on different length scales dictate both the electrical and optical properties of organic semiconductor thin films. Using a combination of spectroscopic methods, including scanning near‐field optical microscopy, we study the domain structure and packing quality of highly crystalline thin films of oligomeric PQT‐12 with 100 nanometer spatial resolution. The pronounced optical anisotropy of these layers measured by polarized light microscopy facilitates the identification of regions with uniform molecular orientation. We find that a hierarchical order on three different length scales exists in these layers, made up of distinct well‐ordered dichroic areas at the ten‐micrometer‐scale, which are sub‐divided into domains with different molecular in‐plane orientation. These serve as a template for the formation of smaller needle‐like crystallites at the layer surface. A high degree of crystalline order is believed to be the cause of the rather high field‐effect mobility of these layers of 10^?3 cm² V^?1 s^?1, whereas it is limited by the presence of domain boundaries at macroscopic distances.     

Self‐Additive Low‐Dimensional Ruddlesden–Popper Perovskite by the Incorporation of Glycine Hydrochloride for High‐Performance and Stable Solar Cells

The recent rise of low‐dimensional Ruddlesden–Popper (RP) perovskites is notable for superior humidity stability, however they suffer from low power conversion efficiency (PCE). Suitable organic spacer cations with special properties display a critical effect on the performance and stability of perovskite solar cells (PSCs). Herein, a new strategy of designing self‐additive low‐dimensional RP perovskites is first proposed by employing a glycine salt (Gly⁺) with outstanding additive effect to improve the photovoltaic performance. Due to the strong interaction between C?O and Pb²⁺, the Gly⁺ can become a nucleation center and be beneficial to uniform and fast growth of the Gly‐based RP perovskites with larger grain sizes, leading to reduced grain boundary and increased carrier transport. As a result, the Gly‐based self‐additive low‐dimensional RP perovskites exhibit remarkable photoelectric properties, yielding the highest PCE of 18.06% for Gly (n = 8) devices and 15.61% for Gly (n = 4) devices with negligible hysteresis. Furthermore, the Gly‐based devices without encapsulation show excellent long‐term stability against humidity, heat, and UV light in comparison to BA‐based low‐dimensional PSCs. This approach provides a feasible design strategy of new‐type low‐dimensional RP perovskites to obtain highly efficient and stable devices for next‐generation photovoltaic applications.