New poly(arylene ether)s containing phthalimidine group in the main chain

Five new poly(arylene ether)s containing phthalimidine group in the main chain and pendent trifluoromethyl group have been prepared by the reaction of 4,4′‐(bis‐4‐fluoro‐3‐trifluoromethylphenyl)benzene (BTF) with bisphenols. Different molar ratios of N‐phenyl‐3,3‐bis(4‐hydroxyphenyl)phthalimidine (PA) and 4,4′‐isopropylidenediphenol (BPA) have been used to generate different copolymers. The polymers obtained by step growth polymerization exhibited weight‐average molecular weight upto 134,000 g/mol with a polydispersity index of 2.1–2.4. The homopolymer from BTF and PA showed very high glass transition temperature of 258°C and outstanding thermal stability upto 536°C for 5% weight loss under nitrogen. The polymers were soluble in a wide range of organic solvents. Transparent thin films of these polymers exhibited tensile strengths upto 65 MPa and elongation at break upto 45% depending on the exact repeat unit structures. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of soluble poly(ether imide)s containing fluorenyl cardo groups

Two series of poly(ether imide)s (PEIs) containing fluorenyl cardo groups in the main chains were synthesized, which are derived from the polycondensation of 9,9′‐bis(4‐aminophenoxyphenyl)fluorene (BAOFL) or 9,9′‐bis(3‐trifluoromethyl,4‐aminophenoxyphenyl)fluorene (6F‐BAOFL) with four kinds of dianhydrides (3,3′,4,4′‐biphenyltetracarboxylic dianhydride, 4,4′‐oxydiphthalicanhydride, 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride, and bisphenol‐A dianhydride), respectively. The PEI films and PEI powder were prepared by thermal and chemical imidization, respectively. The PEIs were characterized by FTIR, ¹H‐NMR, differential scanning calorimetry, thermogravimetric analysis, and UV–vis were performed on inherent viscosity, solubility, and tensile tests. The effects of fluorenyl cardo groups and ether linkages on the solubility, tensile properties, thermal stability, and optical properties were investigated in detail. It was found that the PEIs had good solubility in common organic solvents and good optical transparency in visible light region. In addition, the PEI films exhibited excellent tensile and thermal properties. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Processable and colorless fluorinated poly(ether imide)s based on an isopropylidene‐containing bis(ether anhydride) and various aromatic bis(ether amine)s bearing trifluoromethyl groups

A series of novel organosoluble and light‐colored fluorinated poly(ether imide)s (PEIs) ( IV ) having inherent viscosities of 0.43–0.59 dL/g were prepared from 4,4′‐[1,4‐phenylenbis(isopropylidene‐1,4‐phenyleneoxy)]diphthalic anhydride ( I ) and various trifluoromethyl‐substituted aromatic bis(ether amine)s by a standard two‐step process with thermal and chemical imidization of poly(amic acid) precursors. These PEIs showed excellent solubility in many organic solvents and could be solution‐cast into transparent and tough films. These films were essentially colorless, with an UV–visible absorption edge of 361–375 nm and a very low b* value (a yellowness index) of 15.3–17.0. They also showed good thermal stability with glass‐transition temperature of 191–248°C, 10% weight loss temperature in excess of 494°C, and char yields at 800°C in nitrogen more than 39%. The thermally cured PEI films showed good mechanical properties with tensile strengths of 83–96 MPa, elongations at break of 8–11%, and initial moduli of 1.7–2.0 GPa. They possessed lower dielectric constants of 3.25–3.72 (1 MHz). In comparison with the V series nonfluorinated PEIs, the IV series showed better solubility, lower color intensity, and lower dielectric constants. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 620–628, 2007     

Organosoluble and colorless fluorinated poly(ether imide)s derived from a highly contorted biphenyl-2,2′-diol bis(ether anhydride) and aromatic bis(ether amine)s with trifluoromethyl substituents

A series of new fluorinated aromatic poly(ether imide)s (PEIs) were prepared from highly contorted 2,2′-bis(3,4-dicarboxyphenoxy)biphenyl dianhydride and various trifluoromethyl-containing bis(ether amine)s via chemical or thermal imidization. All the PEIs showed good solubility in a variety of organic solvents and could afford flexible, colorless, and transparent thin films via solution-casting. They showed cut-off wavelengths of Uv-vis absorptions below 380 nm and very low yellowness index (b* < 7.0). They also showed high thermal stability with the 10% weight loss temperature from 503 to 585 °C of in nitrogen or air atmosphere. The glass transition temperatures (T _gs) are recorded in the range of 194–254 °C by DSC. For a comparative study, another series of non-fluorinated PEIs derived from the same biphenyl-2,2′-diol bis(ether anhydride) with various bis(ether amine)s without the trifluoromethyl substituents were also synthesized and characterized.     

Synthesis and properties of novel phosphorus‐containing poly(ether ether ketone ketone)s

A novel monomer, bis[4‐(4‐fluorobenzoyl)phenyl]phenylphosphine oxide, was synthesized through the reaction of bis(4‐chloroformylphenyl) phenyl phosphine oxide with fluorobenzene. Three poly(ether ether ketone ketone)s derived from bis[4‐(4‐fluorobenzoyl)phenyl]phenylphosphine oxide and different aromatic bisphenols were prepared by aromatic nucleophilic substitution reactions. The resulting polymers had inherent viscosities in the range of 0.55–0.73 dL/g. The structures of the poly(ether ether ketone ketone)s were characterized with Fourier transform infrared and ¹H‐NMR. Thermal analysis indicated that the glass‐transition temperatures of the poly(ether ether ketone ketone)s were higher than 200°C, and the 5% weight loss temperatures in nitrogen were higher than 463°C. All the polymers showed excellent solubility in polar solvents such as N‐methyl‐2‐pyrrolidone, dimethylformamide, and dimethylacetamide and could also be dissolved in chlorinated methane. The polymers afforded transparent and flexible films by solvent casting. Organic phosphorous moieties also imparted good flame‐retardancy to the polymers. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and properties of fluorinated bis‐benzocyclobutene‐terminated arylene ether monomers

Four novel bis‐benzocyclobutene‐endcapped arylene ether monomers, 1,1′‐bis[4‐(4′‐benzocyclobutenyloxy)phenyl]‐1‐phenyl‐2,2,2‐trifluoroethane (BOPP3FE), 1,1′‐bis[4‐(4′‐benzocyclobutenyloxy)phenyl]‐1‐(3′,5′‐ditrifluoromethyl)phenyl‐2,2,2‐trifluoroethane(BOPP9FE), 2,2′‐bis[4‐(4′‐benzocyclobutenyloxy)phenyl]‐1,1,1,3,3,3‐hexfluoropropane (BOP6FP), and 2,2′‐bis[4‐(4′‐benzocyclobutenyloxy)phenyl]‐propane (BOPP) were prepared and characterized. All the four monomers showed similar curing behaviors under N₂ (Differential scanning calorimetry: extrapolated onset and peak temperatures at 225–229°C and 261–263°C) and demonstrated low and steady melt viscosities between 110 and 200°C, indicating their good processability. After cure, the resulting BCB resins exhibited high T_g (232–282°C) and excellent thermal stability (T_5% > 433°C). The resins also showed good mechanical properties with the flexural strengths of 68–88 MPa and the flexural modulus of 2.52–3.15 GPa. Moreover, the resins also exhibited low dielectric constants (2.58–2.88), low dissipation factors (2.7 to 8.4 × 10?4) and low water absorptions in boiling water for 24 h (0.29–0.59%). © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis,characterization, and gas transport properties of new semifluorinated poly(ether imide)s containing cardo moiety

A series of new semifluorinated poly(ether imide)s (PEI)s was synthesized from a diamine monomer, 9,9‐bis ‐[3‐phenyl‐4‐{2′‐trifluoromethyl‐4′‐(4′′‐aminophenyl)phenoxy} phenyl]fluorene on reaction with three different aromatic dianhydrides namely, 4,4′‐(4,4′‐isopropylidenediphenoxy)bis (phthalic anhydride), 4,4'‐(hexafluoro‐isopropylidene)diphthalic anhydride, and 4,4'‐oxydiphthalic anhydride. The PEIs were well characterized by elemental analysis, spectroscopic, thermal, mechanical, electrical, and optical techniques. The synthesized PEIs showed high glass transition temperature (T_g up to 288 °C) and high thermal stability (T_{d ,10} up to 521 °C under synthetic air), high tensile strength, up to 76 MPa and low dielectric constant (?) (2.35–2.61 at 1 MHz). The membranes prepared from these polymers were studied for their gas permeability for four different gases CO₂, O₂, N₂, and CH₄. The PEI membranes showed high gas permeability (P _CO2 up to 70.3 and P _O2 up to 16.7 Barrer) and high permselectivity (P _CO2/P _CH4 up to 73.6 and P _O2/P _N2 up to 13.4); for the O₂/N₂ gas pair the PEIs surpassed the present upper boundary limit of 2008 drawn by Robeson. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45213.     

Fluorinated polybenzimidazopyrrolones with excellent alkaline‐hydrolysis resistance

Two novel aromatic tetraamines containing bulky lateral phenyl unit and multiple trifluoromethyl groups, 1,1‐bis[4‐(3′,4′‐diaminophenoxy)phenyl]‐1‐(3″‐trifluoromethylphenyl)?2,2,2‐trifluoroethane (6FTA) and 1,1‐bis[4‐(3′,4′‐diaminophenoxy)phenyl]‐1‐[3″,5″‐bis(trifluoromethyl)phenyl]‐2,2,2‐trifluoroethane (9FTA) were synthesized and characterized. A series of fluorinated aromatic polybenzimidazopyrrolones (polypyrrolones, PPys) were synthesized via a two‐step polycondensation procedure. The inherent viscosities of the precursors, poly(amide amino acid) (PAAA), ranged from 0.39 dL/g to 0.54 dL/g. All the FPPys were amorphous. The freestanding FPPy films could be prepared, which exhibited good thermal stability with the glass transition temperature of 315–389°C, the temperatures of 5% weight loss (T_5%) of 497–535°C in nitrogen and residual weight retention at 700°C over 60%. All the FPPy films exhibited excellent alkaline‐hydrolysis resistance which retained their original shapes and toughness after boiling 7 days in 10% sodium hydroxide solution. Also after boiling 8 h in 10% sodium hydroxide solution, the tensile strength could retain as high as 56% of the original values. The alkaline‐hydrolysis resistance was much better than the polyimides which had similar chemical structures. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2014 , 131, 40041.     

Synthesis and properties of poly(ether imide)s derived from 2,5‐bis(3,4‐dicarboxyphenoxy)biphenyl dianhydride and aromatic ether–diamines

A series of poly(ether imide)s (PEIs) with light colors and good mechanical properties were synthesized from 2,5‐bis(3,4‐dicarboxyphenoxy)biphenyl dianhydride and various aromatic ether–diamines via a conventional two‐step polymerization technique that included ring‐opening polyaddition at room temperature to poly(amic acid)s (PAAs) followed by thermal imidization. The precursor PAAs had inherent viscosities ranging from 0.71 to 1.19 dL/g and were solution‐cast and thermally cyclodehydrated to flexible and tough PEI films. All of the PEI films were essentially colorless, with ultraviolet–visible absorption cutoff wavelengths between 377 and 385 nm and yellowness index values ranging from 10.5 to 19.9. These PEIs showed high thermal stabilities with glass‐transition temperatures of 206–262°C and decomposition temperatures (at 10% weight loss) higher than 478°C. They also showed low dielectric constants of 3.39–3.72 (at 1 MHz) and low water absorptions below 0.85 wt %. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of organosoluble and transparent polyimides derived from trans‐1,2‐bis(3,4‐dicarboxyphenoxy)cyclohexane dianhydride

A novel dianhydride, trans‐1,2‐bis(3,4‐dicarboxyphenoxy)cyclohexane dianhydride (1,2‐CHDPA), was prepared through aromatic nucleophilic substitution reaction of 4‐nitrophthalonitrile with trans‐cyclohexane‐1,2‐diol followed by hydrolysis and dehydration. A series of polyimides (PIs) were synthesized from one‐step polycondensation of 1,2‐CHDPA with several aromatic diamines, such as 2,2′‐bis(trifluoromethyl)biphenyl‐4,4′‐diamine (TFDB), bis(4‐amino‐2‐trifluoromethylphenyl)ether (TFODA), 4,4′‐diaminodiphenyl ether (ODA), 1,4‐bis(4‐aminophenoxy)benzene (TPEQ), 4,4′‐(1,3‐phenylenedioxy)dianiline (TPER), 2,2′‐bis[4‐(3‐aminodiphenoxy)phenyl]sulfone (m‐BAPS), and 2,2′‐bis[4‐(4‐amino‐2‐trifluoromethylphenoxy)phenyl]sulfone (6F‐BAPS). The glass transition temperatures (T_gs) of the polymers were higher than 198°C, and the 5% weight loss temperatures (T_d5%s) were in the range of 424–445°C in nitrogen and 415–430°C in air, respectively. All the PIs were endowed with high solubility in common organic solvents and could be cast into tough and flexible films, which exhibited good mechanical properties with tensile strengths of 76–105 MPa, elongations at break of 4.7–7.6%, and tensile moduli of 1.9–2.6 GPa. In particular, the PI films showed excellent optical transparency in the visible region with the cut‐off wavelengths of 369–375 nm owing to the introduction of trans‐1,2‐cyclohexane moiety into the main chain. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42317.     

Organosoluble and light‐colored fluorinated polyimides derived from 5,5′‐bis[4‐(4‐amino‐2‐trifluoromethylphenoxy) phenyl]‐4,7‐methanohexahydroindan

A novel bis(ether amine) monomer, 5,5′‐bis[4‐(4‐amino‐2‐trifluoromethylphenoxy)phenyl]‐4,7‐methanohexahydroindan ( 2 ), was synthesized through the nucleophilic aromatic substitution reaction of 5,5′‐bis‐(4‐hydroxyphenyl)‐4,7‐methanohexahydroindan with 2‐chloro‐5‐nitrobenzotrifluoride to yield the intermediate dinitro compound, followed by catalytic reduction with hydrazine and Pd/C. A series of polyimides were synthesized from 2 and various aromatic dianhydrides using a standard two‐stage process with chemical or thermal imidization of poly(amic acid). All of these polymer films were soluble in amide‐type solvents above 10% w/v, had tensile strengths of 97–117 MPa, and the 10% weight loss temperature was above 464 °C with their residues exceeding 46% at 800 °C in nitrogen. Compared with the non‐fluorinated polyimides, the fluorinated series were observed to have lower dielectric constants (2.92–3.28 at 1 MHz) and lower moisture absorptions (0.15–0.43 wt%) as well as lower color intensity and better solubility. Copyright © 2006 Society of Chemical Industry     

Polyimides 6: Synthesis,characterization, and comparison of properties of novel fluorinated poly(ether imides)

Five new poly(ether imides) have been prepared on reaction with oxydiphthalic anhydride (ODA) with five different diamines: 1,4‐bis(p‐aminophenoxy‐2′‐trifluoromethyl benzyl) benzene, 4,4′‐bis(p‐aminophenoxy‐2′‐trifluoromethyl benzyl) benzene, 1,3‐bis(p‐aminophenoxy‐2′‐trifluoromethyl benzyl) benzene, 2,6‐bis(p‐aminophenoxy‐2′‐trifluoromethyl benzyl) pyridine, and 2,5‐bis(p‐aminophenoxy‐2′‐trifluoromethyl benzyl) thiophene. Synthesized polymers showed good solubility in different organic solvents. The polyimide films have low water absorption of 0.3–0.7%, low dielectric constants of 2.82–3.19 at 1 MHz, and high optical transparency at 500 nm (>73%). These polyimides showed very high thermal stability with decomposition temperatures (5% weight loss) up to 531°C in air and good isothermal stability; only 0.4% weight loss occurred at 315°C after 5 h. Transparent thin films of these polyimides exhibited tensile strength up to 147 MPa, a modulus of elasticity up to 2.51 GPa and elongation at break up to 30% depending upon the repeating unit structure. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 821–832, 2004     

Synthesis and characterization of organo‐soluble poly(ether ether ketone)s and poly(ether ether ketone ketone)s containing pendant pentadecyl chains

Poly(ether ether ketone)s and poly(ether ether ketone ketone)s containing pendant pentadecyl chains were synthesized by polycondensation of each of the two bisphenol monomers viz, 1,1,1‐[bis(4‐hydroxyphenyl)‐4′‐pentadecylphenyl]ethane and 1,1‐bis(4‐hydroxyphenyl)‐3‐pentadecyl cyclohexane with activated aromatic dihalides namely, 4,4′‐difluorobenzophenone, and 1,3‐bis(4‐fluorobenzoyl)benzene in a solvent mixture of N,N‐dimethylacetamide and toluene, in the presence of anhydrous potassium carbonate. Polymers were isolated as white fibrous materials with inherent viscosities and number average molecular weights in the range 0.70–1.27 dL g^?1 and 76,620–1,36,720, respectively. Poly(ether ether ketone)s and poly(ether ether ketone ketone)s were found to be soluble at room temperature in organic solvents such as chloroform, dichloromethane, tetrahydrofuran, and pyridine and could be cast into tough, transparent, and flexible films from their solutions in chloroform. Wide angle X‐ray diffraction patterns exhibited a broad halo at around 2θ = ～ 19° indicating that the polymers containing pentadecyl chains were amorphous in nature. In the small‐angle region, diffuse reflections of a typically layered structures resulting from the packing of pentadecyl side chains were observed. The temperature at 10% weight loss, obtained from TG curves, for poly(ether ether ketone)s and poly(ether ether ketone ketone)s were in the range 416–459°C, indicating their good thermal stability. A substantial drop in glass transition temperatures (68–78°C) was observed for poly(ether ether ketone)s and poly(ether ether ketone ketone)s due to “internal plasticization” effect of flexible pendant pentadecyl chains. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and properties of novel copolymers of poly(ether ketone diphenyl ketone ether ketone ketone) and poly(ether amide ether amide ether ketone ketone)

New monomers, 4,4′‐bis(4‐phenoxybenzoyl)diphenyl (BPOBDP) and N,N′‐bis(4‐phenoxybenzoyl)?4,4′‐diaminodiphenyl ether (BPBDAE), were conveniently synthesized via simple synthetic procedures from readily available materials. Novel copolymers of poly(ether ketone diphenyl ketone ether ketone ketone) (PEKDKEKK) and poly(ether amide ether amide ether ketone ketone) (PEAEAEKK) were synthesized by electrophilic Friedel‐Crafts solution copolycondensation of isophthaloyl chloride (IPC) with a mixture of BPOBDP and BPBDAE, over a wide range of BPOBDP/BPBDAE molar ratios, in the presence of anhydrous AlCl₃ and N‐methylpyrrolidone (NMP) in 1,2‐dichloroethane (DCE). The copolymers obtained were characterized by different physico‐chemical techniques. The copolymers with 10–40 mol% BPBDAE are semicrystalline and had remarkably increased T_gs over commercially available PEEK and PEKK due to the incorporation of amide and diphenyl linkages in the main chains. The copolymers IV and V with 30–40 mol% BPBDAE had not only high T_gs of 185–188°C, but also moderate T_ms of 326–330°C, having good potential for the melt processing. The copolymers IV and V had tensile strengths of 101.7–102.3 MPa, Young's moduli of 2.19–2.42 GPa, and elongations at break of 13.2–16.6% and exhibited high thermal stability and excellent resistance to organic solvents. POLYM. ENG. SCI., 54:1757–1764, 2014. © 2013 Society of Plastics Engineers     

Synthesis and properties of organosoluble poly(ether imide)s containing 4,4′(octahydro-4,7-methano-5H-inden-5-ylidene) cardo group

A series of organosoluble aromatic poly(ether imide)s (PEIs) VIIa-k were synthesized from 4,4′-[(octahydro-4,7-methano-5H-inden-5-ylidene)bis(1,4-phenylene)dioxy] diphthalic dianhydride (IV) and various aromatic diamines. PEIs synthesized through two-stage polymerization had inherent viscosities of 0.51–0.64 dL/g. This series of polymers could also be synthesized from IV and diamines in a small amount of refluxing m-cresol in a one-step process and had inherent viscosities of 0.65–0.87 dL/g. For the low melting point diamines (Vj and Vk), polymers could be obtained by bulk polymerization and had inherent viscosities of 0.36 and 0.41 dL/g. Polymers showed good organosolubility and could be cast into transparent, flexible, and tough polyimide films with good tensile properties. These PEIs had glass transition temperatures among 203–281°C. Thermogravimetric analyses established that these polymers were fairly stable up to 430°C, and the 10% weight loss temperatures were recorded in the range of 473–503°C in nitrogen and 481–512°C in air atmosphere. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 987–996, 1999     

Synthesis and characterization of new cardo poly(ether imide)s derived from 9,9‐bis [4‐(4‐aminophenoxy)phenyl]xanthene

A series of new cardo poly(ether imide)s bearing flexible ether and bulky xanthene pendant groups was prepared from 9,9‐bis[4‐(4‐aminophenoxy)phenyl]xanthene with six commercially available aromatic tetracarboxylic dianhydrides in N,N‐dimethylacetamide (DMAc) via the poly(amic acid) precursors and subsequent thermal or chemical imidization. The intermediate poly(amic acid)s had inherent viscosities between 0.83 and 1.28 dL/g, could be cast from DMAc solutions and thermally converted into transparent, flexible, and tough poly(ether imide) films which were further characterized by X‐ray and mechanical analysis. All of the poly(ether imide)s were amorphous and their films exhibited tensile strengths of 89–108 MPa, elongations at break of 7–9%, and initial moduli of 2.12–2.65 GPa. Three poly(ether imide)s derived from 4,4′‐oxydiphthalic anhydride, 4,4′‐sulfonyldiphthalic anhydride, and 2,2‐bis(3,4‐dicarboxyphenyl))hexafluoropropane anhydride, respectively, exhibited excellent solubility in various solvents such as DMAc, N,N‐dimethylformamide, N‐methyl‐2‐pyrrolidinone, pyridine, and even in tetrahydrofuran at room temperature. The resulting poly(ether imide)s with glass transition temperatures between 286 and 335°C had initial decomposition temperatures above 500°C, 10% weight loss temperatures ranging from 551 to 575°C in nitrogen and 547 to 570°C in air, and char yields of 53–64% at 800°C in nitrogen. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis and properties of copolymers of poly(ether ketone ketone) and poly(ether amide ether amide ether ketone ketone)

Poly(aryl ether ketone)s (PAEKs) are a class of high‐performance engineering thermoplastics known for their excellent combination of chemical, physical and mechanical properties, and the synthesis of semicrystalline PAEKs with increased glass transition temperatures (T_g) is of much interest. In the work reported, a series of novel copolymers of poly(ether ketone ketone) (PEKK) and poly(ether amide ether amide ether ketone ketone) were synthesized by electrophilic solution polycondensation of terephthaloyl chloride with a mixture of diphenyl ether and N,N′‐bis(4‐phenoxybenzoyl)‐4,4′‐diaminodiphenyl ether (BPBDAE) under mild conditions. The copolymers obtained were characterized using various physicochemical techniques. The copolymers with 10–35 mol% BPBDAE are semicrystalline and have markedly increased T_g over commercially available poly(ether ether ketone) and PEKK due to the incorporation of amide linkages in the main chain. The copolymers with 30–35 mol% BPBDAE not only have high T_g of 178–186 °C, but also moderate melting temperatures of 335–339 °C, having good potential for melt processing. The copolymers with 30–35 mol% BPBDAE have tensile strengths of 102.4–103.8 MPa, Young's moduli of 2.33–2.45 GPa and elongations at break of 11.7–13.2%, and exhibit high thermal stability and good resistance to organic solvents. Copyright © 2010 Society of Chemical Industry     

Synthesis and characterization of novel fluorinated polyimides derived from bis[4-(4′-aminophenoxy)phenyl]-3,5-bis(trifluoromethyl)phenyl phosphine oxide

A novel fluorinated aromatic diamine, bis[4-(4′-aminophenoxy)phenyl]-3,5-bis(trifluoromethyl)phenyl phosphine oxide, was synthesized. A series of new fluorinated polyimides containing phosphine oxide was prepared from the novel diamine with various commercially available aromatic dianhydrides. All the fluorinated polyimides show high glass transition temperatures, excellent thermal stability, and good solubility in common organic solvents.     

Synthesis and characterization of novel soluble poly(ether ketone sulfone)s with pendant polychloro groups

A novel monomer of tetrachloroterephthaloyl chloride (TCTPC) was prepared by the chlorination of terephthaloyl chloride catalyzed by ferric chloride at 175–180°C for 10 h and confirmed by FTIR, MS, and elemental analysis. Five new polychloro substituted poly(aryl ether ketone sulfone)s (PEKSs) with inherent viscosities of 0.68–0.75 dL/g have been prepared from 4,4′‐diphenoxydiphenylsulfone, 4,4′‐bis(2‐methylphenoxy) diphenylsulfone, 4,4′‐bis(3‐methylph‐enoxy)diphenylsulfone, 4,4′‐bis(2,6‐dimethylphenoxy)diphenylsulfone, and 4,4′‐bis(1‐naphthoxy)‐diphenylsulfone with TCTPC by electrophilic Friedel‐Crafts acylation in the presence of DMF with anhydrous AlCl₃ as a catalyst in 1,2‐dichloroethane, respectively. These polymers having weight–average molecular weight in the range of 76,600–83,900 are all amorphous and show high glass transition temperatures ranging from 213 to 250°C, the 5% weight loss temperature over 450°C, high char yields of 60–67% at 700°C in nitrogen and good solubility in CHCl₃ and polar solvents such as DMF, DMSO, and NMP at room temperature. All the polymers formed transparent, strong, and flexible films, with tensile strengths of 85.1–90.8 MPa, Young's moduli of 2.52–3.24 GPa, and elongations at break of 21.2–27.2%. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and properties of novel organosoluble aromatic poly(ether ketone)s containing pendant methyl groups and sulfone linkages

Several novel aromatic poly(ether ketone)s containing pendant methyl groups and sulfone linkages with inherent viscosities of 0.62–0.65 dL/g were prepared from 2‐methyldiphenylether and 3‐methyldiphenylether with 4,4′‐bis(4‐chloroformylphenoxy)diphenylsulfone and 4,4′‐bis (3‐chloroformylphenoxy)diphenylsulfone by electrophilic Friedel–Crafts acylation in the presence of N,N‐dimethylformamide with anhydrous AlCl₃ as a catalyst in 1,2‐dichloroethane. These polymers, having weight‐average molecular weights in the range of 57,000–71,000, were all amorphous and showed high glass‐transition temperatures ranging from 160.5 to 167°C, excellent thermal stability at temperatures over 450°C in air or nitrogen, high char yields of 52–57% in nitrogen, and good solubility in CHCl₃ and polar solvents such as N,N‐dimethylformamide, dimethyl sulfoxide, and N‐methyl‐2‐pyrrolidone at room temperature. All the polymers formed transparent, strong, and flexible films, with tensile strengths of 84.6–90.4 MPa, Young's moduli of 2.33–2.71 GPa, and elongations at break of 26.1–27.4%. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008