Preparation of polyvinylidene fluoride membrane via a thermally induced phase separation using a mixed diluent

Polyvinylidene fluoride (PVDF) membranes were prepared via a thermally induced phase separation method with a mixed diluent (dibutylphthalate/dioctyl phthalate). The effects of PVDF concentration and cooling bath temperature (CBT) on the structure and properties of the membranes were investigated. Scanning electron microscopy photos showed that the cross‐section of all the membranes, regardless of PVDF concentration and CBT, presented a bi‐continuous structure with the spherulitic pattern; moreover, the spherulitic patterns became clear gradually from the top surface to the bottom surface, and the top surface was denser than the bottom surface. As a result, all the membranes exhibited an asymmetric structure. The membrane property measurement indicated that, as PVDF concentration increased from 25 to 35 wt %, the pure water flux (PWF) decreased from 342 to 80 L m^?2 h^?1, and the porosity decreased slightly, whereas the minimum bubble point pressure (BPP) increased, which indicates maximum pore size decreased. In addition, with the increase in CBT, the PWF increased, but, the minimum BPP and porosity decreased. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Effect of diluents on membrane formation via thermally induced phase separation

The effect of diluents on isotactic polypropylene (iPP) membrane formation via thermally induced phase separation was investigated. The diluents were methyl salicylate (MS), diphenyl ether (DPE), and diphenylmethane (DPM). The cloud-point curve was shifted to a lower temperature in the order iPP–MS, iPP–DPE, and iPP–DPM, whereas the crystallization temperature was not influenced so much by diluent type. Droplet-growth processes were investigated under two conditions: quenching the polymer solution at the desired temperature and cooling at a constant rate. Although droplet sizes were in the order iPP–MS, iPP–DPE, and iPP–DPM in both cases, the difference was more pronounced with the constant cooling rate condition. Scanning electron microscopy indicated that interconnected structures were obtained when the polymer solution was quenched in ice water. The effect of the diluents on these structures was observed. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 169–177, 2001     

Effects of mixed diluent compositions on poly(vinylidene fluoride) membrane morphology in a thermally induced phase‐separation process

The effects of a mixed diluent (MD) composition [dibutyl phthalate/dioctyl phthalate (DOP)] on poly (vinylidene fluoride) (PVDF) membrane morphology were investigated with scanning electron microscopy, and a bicontinuous morphology could be obtained with MD in a thermally induced phase‐separation process. The reasons for the morphology formation were explained according to the effect of MD on the phase diagrams. In addition, the effects of the PVDF concentration on the membrane morphology were examined. For the system with less DOP, the large spherulite morphology was obvious under all investigated concentrations, whereas no large spherulite structure existed in the membrane as the DOP content increased to concentrations other than 20%. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Thermally induced phase separation in poly(lactic acid)/dialkyl phthalate systems

Thermally induced phase separation in poly(lactic acid)/dialkyl phthalate systems was investigated. Poly(DL ‐lactic acid) (PDLLA) and poly(L ‐lactic acid) (PLLA) with different molecular weights were used. A series of dialkyl phthalates, with different numbers of carbon atoms in the alkyl chain, were employed as solvents to control the interaction between polymer and solvent. The liquid–liquid phase‐separation temperature of the poly(lactic acid) solutions decreased systematically with a shorter alkyl chain in the phthalate. Based on the interaction between polymer and solvent and the molecular weight of polymer influencing liquid–liquid phase‐separation temperature significantly but crystallization temperature only slightly, proper thermal conditions were employed to investigate competitive phase separation and crystallization in PLLA solutions. Factors that can influence the final morphology of PLLA solutions were examined. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2224–2232, 2003     

Fabrication of poly(vinylidene fluoride) membrane via thermally induced phase separation using ionic liquid as green diluent

Ionic liquid(IL), 1-butyl-3-methylimidazolium hexafluorophosphate([BMIM]PF6) as a new and environmentally friendly diluent was introduced to prepare poly(vinylidene fluoride)(PVDF) membranes via thermally induced phase separation(TIPS). Phase diagram of PVDF/[BMIM]PF6 was measured. The effects of polymer concentration and quenching temperature on the morphologies, properties, and performances of the PVDF membranes were investigated. When the polymer concentration was 15 wt%, the pure water flux of the fabricated membrane was up to nearly 2000 L·m~(-2)·h~(-1), along with adequate mechanical strength. With the increasing of PVDF concentration and quenching temperature, mean pore size and water permeability of the membrane decreased. SEM results showed that PVDF membranes manufactured by ionic liquid(BMIm PF6) presented spherulite structure. And the PVDF membranes were represented as β phase by XRD and FTIR characterization. It provides a new way to prepare PVDF membranes with piezoelectric properties.     

Formation of porous poly(ethylene‐co‐vinyl alcohol) membrane via thermally induced phase separation

Crystalline poly(ethylene‐co‐vinyl alcohol) (EVOH) membranes were prepared by a thermally induced phase separation (TIPS) process. The diluents used were 1,3‐propanediol and 1,3‐butanediol. The dynamic crystallization temperature was determined by DSC measurement. No structure was detected by an optical microscope in the temperature region higher than the crystallization temperature. This means that porous membrane structures were formed by solid–liquid phase separation (polymer crystallization) rather than by liquid–liquid phase separation. The EVOH/butanediol system showed a higher dynamic crystallization temperature and equilibrium melting temperature than those of the EVOH/propanediol system. SEM observation showed that the sizes of the crystalline particles in the membranes depended on the polymer concentration, cooling rate, and kinds of diluents. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 79: 2449–2455, 2001     

Preparation and membrane performance of poly(ethylene-co-vinyl alcohol) hollow fiber membrane via thermally induced phase separation

Poly(ethylene-co-vinyl alcohol) (EVOH) hollow fiber membranes with ultrafiltration performance were prepared from EVOH/glycerol systems via thermally induced phase separation (TIPS). The diluent glycerol was used as bore liquid to make a lumen of the hollow fiber for the purpose of prevention of the diluent evaporation and the larger pores formation at the inner surface of the hollow fiber. The obtained hollow fiber membranes showed asymmetric structures with skin layer near the outer surface, the larger pores just below the skin layer and the smaller pores near the inner surface. The formation of the larger pores near the outer surface was due to the enhanced pore growth by the water penetration. Some primary factors affecting the structure and performance of the membranes such as ethylene content (EC) in EVOH, cooling water bath temperature and take-up speed were studied extensively. The water permeability can be improved by increasing the water bath temperature and the take-up speed and by decreasing the EC. Both the pore size at the outer surface and the connectivity between the pores have to be considered together to understand the experimental result of the water permeability and the solute rejection.     

Effects of nucleating agents on the morphologies and performances of poly(vinylidene fluoride) microporous membranes via thermally induced phase separation

The effects of nucleating agents on the morphology and performance of poly(vinylidene fluoride) (PVDF) microporous membranes via thermally induced phase separation were investigated. The nucleating agents studied were dicyclohexyl benzene amide (TMB‐5), 2,2‐methylene bis(4,6‐tertiary butyl phenol) sodium phosphate (TMP‐1), and 1,3 : 2,4‐di‐p‐methylbenzylidene sorbitol (DM–LO). Light transmittance experiments and differential scanning calorimetry (DSC) were performed to obtain phase diagrams of PVDF/tributyl citrate/di(2‐ethylhexyl) phthalate/nucleating agent doped solutions. The morphology and performance of the prepared PVDF microporous membranes were characterized with scanning electron microscopy and microfiltration experiments. The results show that the thermodynamics of liquid–liquid phase separation were not affected by the addition of the nucleating agents, but solid–liquid phase separation was influenced. The system with 0.3 wt % TMB‐5 had the fastest crystallization rate and a better nucleation ability. The PVDF microporous membranes had a partly closed, lacy bicontinuous structure with TMP‐1 and DM–LO, whereas the membrane with 0.3 wt % TMB‐5 had an interconnected bicontinuous structure. The pore size distribution became narrower with the addition of nucleating agent. With 0.3 wt % TMB‐5, the membrane had the minimum mean pore size (0.095 μm), a porosity of 80.3%, and a pure water flux of 270 L·m^?2·h^?1; these values were higher than those of the pure PVDF membrane. The performances of the membranes decreased with additions of TMB‐5 of greater than 0.3 wt %. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Effect of diluents on the crystallization behavior of poly(4‐methyl‐1‐pentene) and membrane morphology via thermally induced phase separation

The effect of diluents on polymer crystallization and membrane morphology via thermally induced phase separation(TIPS) were studied by changing the composition of the mixed‐diluents systematically, in the system of poly(4‐methyl‐1‐pentene) (TPX)/dibutyl‐phthalate (DBP)/di‐n‐octyl‐phthalate (D‐n‐OP) with TPX concentration of 30 wt %. The TPX crystallization was observed with differential scanning calorimetry (DSC) and wide angle X‐ray diffraction (WAXD). The membranes were characterized with scanning electron microscopy (SEM), porosity, and pore size measurement. As the content of D‐n‐OP increased in mixed‐diluents, the solubility with TPX increased, inducing the phase separation changing from liquid–liquid phase separation into solid–liquid phase separation, which changed the membrane morphology and structure. When the ratios of DBP to D‐n‐OP were 10 : 0, 7 : 3; 5 : 5, and 3 : 7, membranes were formed with cellular structure and well connected pores, while the ratio was 0 : 10, discernable spherulities were found with not well‐formed pore structure. The effect of composition of the mixed‐diluents on membrane morphology was more remarkable in TPX/dioctyl‐sebacate (DOS)/dimethyl‐phthalate (DMP) system, since good cellular structure was formed when the ratios of DOS to DMP were 10 : 0, 7 : 3, while spherulites were observed when 5 : 5. Dual endotherm peaks behavior on DSC melting curves emerged for all the samples in this study, which was attributed to the special polymer crystallization behavior, primary crystallization, and secondary crystallization occurred when quenching the samples. As the content of D‐n‐OP increased, the secondary crystallization enhanced which induced the first endotherm peak on DSC melting curves moving to a lower temperature and the broadening of the overall melting peak, as well as the increasing of the overall crystallinity. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Characteristics of poly(ether ether ketone) microporous membranes prepared via thermally induced phase separation (TIPS)

The morphology and bulk properties of microporous membranes based on poly (ether ether ketone) (PEEK) have been investigated as a function of initial casting composition and thermal and mechanical processing history. Membranes were prepared via solid—liquid phase separation of miscible blends of PEEK and polyetherimide (PEI), with subsequent extraction of the PEI diluent. Scanning electron microscopy studies revealed a microporous morphology with two distinct pore size scales corresponding to diluent extraction from interfibrillar and interspherulitic regions, respectively. The membrane structure was sensitive to both initial blend composition and crystallization temperature, with the resulting pore size distribution reflecting the kinetics of phase separation. For membranes prepared with lower initial diluent content or at lower crystallization temperatures, mercury intrusion porosimetry indicated a relatively narrow distribution of fine interfibrillar pores, with an average pore size of approximately 0.04 microns. Membranes prepared at higher diluent content or at higher crystallization temperatures displayed a broad pore distribution, with a sizeable population of coarse, interspherulitic pores (0.1 to 1 μm in size). Uniaxial drawing led to a fibrillated network structure with markedly higher water flux characteristics compared to the as-cast membranes. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 66: 2347–2355, 1997     

Morphology of polyvinylidene fluoride and its blend in thermally induced phase separation process

Polyvinylidene fluoride (PVDF) and its blend films were prepared by melt‐blending the binary mixture of PVDF/dibutyl phthalate (DBP) and the ternary mixture of PVDF/CaCO₃/DBP in combination of TIPS. Their morphologies were characterized by scanning electron microscope depended on preparation condition, such as the diluent and CaCO₃ weight fraction, and the cooling rate, and the crystallization information was also investigated by DSC. The results showed that CaCO₃ influenced the morphology of PVDF in the TIPS process regardless of the cooling conditions, and the formation of the spherulitic morphology can be disturbed by CaCO₃ at the quenching condition. The effect of CaCO₃ weight fraction on the tensile strength of PVDF was measured, which indicated CaCO₃ had a negative effect on PVDF tensile strength. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2944–2952, 2006     

Membrane formation via thermally induced phase separation in polypropylene/polybutene/diluent system

Porous membranes were prepared from a polymer blend system by the thermally induced phase separation (TIPS) process. The polymer blend system was isotactic polypropylene (iPP)/polybutene (PB) and the diluent was diphenyl ether (DPE). Two types of porous membranes were prepared by the extractions of DPE alone and both DPE and PB after the phase separation. The effect of the addition of PB to the iPP solution on the phase diagram was investigated and the phase separation kinetics was measured by the light scattering method. The addition of PB resulted in the higher solute rejection property and lower water permeance. By the further extraction of PB from the porous iPP/PB membrane prepared by the extraction of DPE, the water permeance was approximately doubled, maintaining almost the same rejection property. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1701–1708, 2002; DOI 10.1002/app.10550     

Stretching induced phase separation in poly(vinylidene fluoride)/poly(butylene succinate) blends studied by in-situ X-ray scattering

The structure evolution of poly(vinylidene fluoride)/poly(butylene succinate) (PVDF/PBS) blends during stretching above the melting point of PBS is investigated by synchrotron-based simultaneous wide angle and small angle X-ray scattering (WAXS/SAXS). Before stretching, PVDF crystallizes into the α-form, whereas the chains of molten PBS locate at the inter-lamellar amorphous phase of PVDF. Crystal transition from α to β of PVDF is observed in all samples during stretching. The morphological transformation from a lamellar structure into a fibrillar structure occurs at low and intermediate strains. With further deformation, a “stretching induced phase separation” phenomenon is observed. The final microstructure of PVDF/PBS blends contains PVDF microfibrils with PBS chains preferentially distributed in the inter-fibrillar region. The PBS molecular weight influences the onset and end strain for the transition. A new “two-step model” is proposed to describe the deformation process.     

Formation of microporous polymeric membranes via thermally induced phase separation: A review

A review of recent research related to microporous polymeric membranes formed via thermally induced phase separation (TIPS) and the morphologies of these membranes is presented. A summary of polymers and suitable diluents that can be used to prepare these microporous membranes via TIPS are summarized. The effects of different kinds of polymer materials, diluent types, cooling conditions, extractants and additive agents on the morphology and performance of TIPS membranes are also discussed. Finally new developments in TIPS technology are summarized.

Open image in new window

     

Formation of an interconnected lamellar structure in PVDF membranes with nanoparticles addition via solid‐liquid thermally induced phase separation

Novel microporous membranes were prepared via thermally induced solid‐liquid (S‐L) phase separation of mixtures containing poly(vinylidene fluoride) (PVDF)/diphenyl ketone (DPK)/nanoparticles [such as montmorillonite (MMT) and polytetrafluoroethylene (PTFE)] in diluted systems with a mass ratio of 29.7/70/0.3 wt %. The crystallization and melting characteristics of these diluted systems were investigated by polarizing optical microscopy (POM), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), and wide angle X‐ray diffraction (WAXD). The nanoparticle structure and the interaction between PVDF chains and nanoparticle surfaces determined the crystallization behavior and morphology of the PVDF membrane. The addition of MMT and PTFE had a significant nucleation enhancement on the crystallization of PVDF accompanied by S‐L phase separation during the thermally induced phase separation (TIPS) process. It was observed that an interconnected lamellar structure was formed in these two membranes, leading to a higher tensile strength compared with that of the reference membrane without nanoparticles addition. Additionally, addition of MMT facilitates the fiber‐like β phase crystal formation, resulting in the highest elongation at break. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

热致相分离法iPP/nano-SiO2杂化中空纤维膜的结构与透过性能

通过熔融共混等规聚丙烯(iPP)/邻苯二甲酸二丁酯(DBP)/邻苯二甲酸二辛酯(DOP)/纳米二氧化硅(nano-SiO2)体系,采用热致相分离法(TIPS)制备了iPP中空纤维膜。对膜结构与透过性能进行了表征。用示差扫描量热仪(DSC)测定了体系的iPP动态结晶温度,融化峰值温度数值表明结晶只存在α晶型。X光电子能谱(XPS)表明nano-SiO2向膜表面发生了迁移,使得膜的亲水性有所提高,膜的接触角由120.05°降低到101.05°,降低了19.7%。随着nano-SiO2添加量的增加,膜的孔隙率和纯水通量均呈现先增大后减小的趋势。膜的孔隙率增加了20.2%,纯水通量增大了21.7%。经过拉伸后的杂化膜,孔隙率增大了27.4%,纯水通量增加了211%。研究表明:通过向铸膜液中添加nano-SiO2,可以优化膜结构,并改善膜的亲/疏水性以及透过性能。     

Preparation and properties of poly(L‐lactic acid) scaffolds by thermally induced phase separation from a ternary polymer–solvent system

Poly(L ‐lactic acid) (PLLA) foams for tissue engineering were prepared via thermally induced phase separation of a ternary system PLLA/dioxane/tetrahydrofuran (THF) followed by double solvent exchange (water and ethyl alcohol) and drying. An extension to solidification from solution of a previously developed method for solidification from the melt was adopted. The technique is based on a continuous cooling transformation (CCT) approach, consisting in recording the thermal history experienced by rapidly cooled samples and then analyzing the resulting sample morphology. Different foams were produced by changing the relative amount of dioxane and THF in the starting solution while the amount of polymer was kept constant. Results show that the final morphology and crystallinity (measured by DSC) depend on solvent power, which in its turn was determined by the ratio dioxane/THF, and a minimum of pore size, optimum final crystallinity and crystallization rate were achieved for a system containing 70 % of dioxane. Under this condition, a higher bulk density (evaluated by Hg intrusion porosimetry) and a larger specific surface area (measured by BET N₂ sorption technique) was achieved. Copyright © 2004 Society of Chemical Industry     

Facile fabrication of poly(methyl methacrylate) monolith via thermally induced phase separation by utilizing unique cosolvency

Poly(methyl methacrylate) (PMMA) monoliths with a three-dimensional continuous interconnected porous structure in a single piece were fabricated via thermally induced phase separation (TIPS) by utilizing unique cosolvency toward PMMA. We found that PMMA was soluble in a mixture of non-solvents (ethanol and water) at 60 °C. Cooling the solution resulted in formation of a monolith having interconnected pores. Cross-sectional analysis using scanning electron microscopy (SEM) showed a continuous porous network with submicron-sized skeleton. The pore size of the monolith was readily controlled by varying the fabrication parameters such as the polymer concentration and molecular weight, the cooling temperature and the solvent composition. The cross-section of the monolith showed high water repellency. The PMMA monolith was also obtained in a mixture of isopropanol and water with an appropriate solvent ratio.     

热致相分离法制备聚乙烯/纳米二氧化钛共混膜

采用相对分子质量为130 000的聚乙烯(PE)为膜材、DIDP为稀释剂、平均直径为180 nm的TiO2粉末作添加剂,用热致相分离(TIPS)法制备了PE膜和PE/TiO2共混膜。研究了共混组成和冷却速率对膜结构的影响。所有制备的膜均是海绵状孔,冷却速率越大,膜孔越小。对PE质量分数为15%,当PE与TiO2的质量比大于1时,TiO2在膜内的分布不均匀,当PE与TiO2的质量比为0.5时,TiO2能比较均匀的分布于膜内。共混膜浸于水中经过紫外照射后,其亲水性显著增加。     

Poly(vinylidene fluoride-co-hexafluoro propylene) membranes prepared via thermally induced phase separation and application in direct contact membrane distillation

A non-toxic and environmentally safe diluent, acetyl tributyl citrate, was employed to prepare poly(vinylidene fluoride)-co-hexafluoropropylene membranes via thermally induced phase separation. Effects of the polymer concentration on the phase diagram, membrane morphology, hydrophobicity, pore size, porosity and mechanical properties (tensile stress and elongation at break) were investigated. The results showed that the pore size and porosity tended to decrease with increasing polymer concentration, whereas the contact angle, liquid entry pressure and mechanical properties showed the opposite trend. In direct contact membrane distillation operation with 3.5 wt-% sodium chloride solution as the feed solution, the prepared membranes performed high salt rejection (>99.9%). Furthermore, the prepared membranes retained excellent performance in long-term stability tests regarding the permeate flux and salt rejection.