Starch–acrylics graft copolymers and blends: Synthesis,characterization, and applications as matrix for drug delivery

A series of acrylic monomers–starch graft copolymers were prepared by ceric ion initiation method by varying the amount of monomers. These graft copolymers were characterized by IR and ¹³C‐NMR spectroscopy. It was seen that as the concentration of monomer [acrylic acid (AA), methacrylic acid (MA), and methyl methacrylate (MMA)] increased the percent add‐on increased in all the graft copolymers, whereas grafting efficiency increased initially but showed a slight decrease with further increase in the monomer concentration (except for MMA). The release rate of paracetamol as a model drug from graft copolymers as well as their blends was studied at two different pH, 1.2 and 7.4, spectrophotometrically. The release of paracetamol in phosphate buffer solution at pH 1.2 was insignificant in the first 3 h for St‐g‐PAA‐ and St‐g‐PMA‐graft copolymers, which was attributed to the matrix compaction and stabilization through hydrogen bonding at lower pH. At pH 7.4, the release rate was seen to decrease with increase in add‐on. The tablet containing poly(methyl methacrylate) (PMMA) did not disintegrate at the end of 30–32 h, which may be attributed to the hydrophobic nature of PMMA. These results indicate that the graft copolymers may be useful to overcome the harsh environment of the stomach and can be used as excipients in colon‐targeting matrices. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Tailoring the swelling and glass‐transition temperature of acrylonitrile/hydroxyethyl acrylate copolymers

Novel polyacrylonitrile (PAN)‐co‐poly(hydroxyethyl acrylate) (PHEA) copolymers at three different compositions (8, 12, and 16 mol % PHEA) and their homopolymers were synthesized systematically by emulsion polymerization. Their chemical structures and compositions were elucidated by Fourier transform infrared, ¹H‐NMR, and ¹³C‐NMR spectroscopy. Intrinsic viscosity measurements revealed that the molecular weights of the copolymers were quite enough to form ductile films. The influence of the molar fraction of hydroxyethyl acrylate on the glass‐transition temperature (T_g) and mechanical properties was demonstrated by differential scanning calorimetry and tensile test results, respectively. Additionally, thermogravimetric analysis of copolymers was performed to investigate the degradation mechanism. The swelling behaviors and densities of the free‐standing copolymer films were also evaluated. This study showed that one can tailor the hydrogel properties, mechanical properties, and T_g's of copolymers by changing the monomer feed ratios. On the basis of our findings, PAN‐co‐PHEA copolymer films could be useful for various biomaterial applications requiring good mechanical properties, such as ophthalmic and tissue engineering and also drug and hormone delivery. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation and properties of poly(WPSF‐co‐butyl acrylate) copolymer emulsion with ultrasonic radiation II. Monomer conversion rate and characterization

A stable emulsion of poly(WPSF‐co‐butyl acrylate) based on butyl acrylate, waste polystyrene foam was synthesized through emulsion polymerization using sodium dodecyl sulfate and octyl phenyl polyoxyethylene ether as surfactant, ammonium persulfate and sodium hydrogen bisulfate as mixed redox initiator, under ultrasound irradiation in the absence of inert gas. The effects of various copolymerization conditions on the monomer conversion were reported. The copolymers were characterized by means of IR, ¹HNMR, and gel permeation chromatography. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis of defined polyhedral oligosilsesquioxane‐containing diblock and triblock methacrylate copolymers by atom transfer radical polymerization

Defined diblock and triblock copolymers composed of methyl methacrylate‐co‐glycidyl methacrylate block and 3‐{3,5,7,9,11,13,15‐hepta(2‐methylpropyl)‐pentacyclo[9.5.1.1^3,9.1^5,15.1^7,13]‐octasiloxan‐1‐yl}propyl methacrylate block(s), i.e., P(MMA‐co‐GMA)‐b‐PiBuPOSSMA and PiBuPOSSMA‐b‐P(MMA‐co‐GMA)‐b‐PiBuPOSSMA, were synthesized by atom transfer radical polymerization (ATRP). First, monofunctional and bifunctional P(MMA‐co‐GMA) copolymers were synthesized by ATRP. Subsequently, these copolymers were successfully used as macroinitiators for ATRP of POSS‐containing methacrylate monomer. The process showed high initiation efficiency of macroinitiators and led to products with low dispersity. The synthesized block copolymers were characterized by size exclusion chromatography, ¹H‐NMR spectroscopy and their glass transition temperatures were determined by differential scanning calorimetry. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis,characterization, and antimicrobial properties of novel quaternary amine methacrylate copolymers

A novel amine methacrylate monomer trimethylolpropane trimethacrylate–piperazine–ethyleneglycol dimethacrylate (TMPTMA‐PPZ‐EGDMA) was synthesized by amination of trimethylolpropane trimethacrylate (TMPTMA) with excess of piperazine (PPZ) followed by reaction with ethyleneglycol dimethacrylate (EGDMA). Copolymerization of TMPTMA‐PPZ‐EGDMA with 2‐hydroxyethyl methacrylate (HEMA) was carried out by free radical polymerization using ammonium persulfate (APS) and N,N,N′,N′‐tetramethyl ethylenediamine (TEMED) as a redox initiator. The copolymers obtained were then quaternized with 1‐iodooctane. The monomers were characterized by FTIR and ¹H NMR spectral studies. The molecular weights and polydispersity values of the monomers were determined with gel permeation chromatography. Quaternized copolymers containing more than 20% amine methacrylate monomer showed microporosity in the range of 9.9–10.4 μm. The antibacterial activity of the quaternized copolymers against Escherichia coli and Staphylococcus aureus was studied using UV–vis spectrophotometer and scanning electron microscopy. Quaternized copolymers showed broad‐spectrum contact‐killing antibacterial properties without releasing any active agent as checked by iodide selective ion meter. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Homopolymer of 4-chloro-3-methyl Phenyl Methacrylate and its Copolymers with Butyl Methacrylate: Synthesis, Characterization, Reactivity Ratios and Antimicrobial Activity

The methacrylate monomer 4-chloro-3‐methyl phenyl methacrylate (CMPM) was synthesized by reacting 4-chloro-3‐methyl phenol with methacryloyl chloride. The homopolymer and various copolymers of CMPM with n-butyl methacrylate were synthesized by free-radical polymerization in toluene at 70°C using 2,2′-azobis(isobutyronitrile) as the initiator. The CMPM monomer was characterized by Fourier transform IR and ¹H-NMR studies. The copolymers were characterized by IR spectroscopy. The molecular weights (M _n and M _w) and the polydispersity index were obtained from gel permeation chromatography. The solubility and intrinsic viscosity of the homopolymer and the copolymers are also discussed here. The copolymer composition obtained from UV spectra led to the determination of reactivity ratios employing Fineman-Ross and Kelen-Tudos linearization methods. Thermogravimetric analyses of the homopolymer and the copolymers were carried out under a nitrogen atmosphere. The homopolymer and the copolymers prepared were tested for their antimicrobial activity against bacteria, fungi and yeasts.     

Synthesis of fluorosilicone monomer and application in hydrophobic surface of acrylic copolymer

A kind of fluorosilicone monomer with polymerizable vinyl group and fluorine and silicon components has been designed and synthesized. A series of acrylic copolymers were prepared using the monomer and normal acrylic monomers. The effects of the monomer on the surface properties and thermostability of the copolymers were studied. The chemical structure of the monomer and the copolymers were confirmed by FTIR, ¹H NMR, and ¹⁹F NMR. MALDI‐TOF‐MS was used to monitor the molecular weight variation during the monomer synthesis process. Thermal properties of the copolymers were analyzed by DSC and TGA. Surface properties of the copolymer films were characterized by static water contact angles, AFM, and XPS. Results showed that the fluorosilicone monomer with the expected structure was synthesized and had been copolymerized into the copolymers. The monomer contributed to a uniform hydrophobic film with no influence on the surface roughness. The thermostability of the copolymers was improved by the monomer. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41926.     

Synthesis of novel functionalized methacrylate copolymers and their copolymerization kinetics,thermal stability,and biocidal properties

In the first step of this study, 2-[(methoxy-1,3-benzothiazole-2-yl)amino]-2-oxoethyl methacrylate (MBAOM) monomer was synthesized and characterized. Then, a series copolymers were obtained by free-radical copolymerization method of MBAOM and glycidyl methacrylate, which is a commercial monomer at 65°C in 1,4-dioxane solvent. Structural characterizations of synthesized monomer and copolymers were carried out using Fourier transform infrared spectrophotometer and nuclear magnetic resonance spectroscopy (¹H and ¹³C-NMR) instruments. The composition of the copolymers was estimated by elemental analysis. The thermal behaviors of all the polymers have been investigated using the differential scanning calorimetry and the thermogravimetric analysis. A kinetic study of the thermal decomposition of copolymers was investigated using thermogravimetric analyzer with non-isothermal methods selected for analyzing solid-state kinetics data. The activation energy (E_a) values were calculated via Kissinger and Ozawa models in a period of α = 0.10–0.80. Photostability of the copolymers was investigated. Also, the biological activity of the copolymers against different bacterial and fungal species has been investigated.     

Synthesis and Their Thermal and Thermo-Oxidative Properties of Poly(benzimidazole amide imide) Copolymers

In this study, the 3′-dinitrobenzidine was first reacted with excess isophthaloyl chloride form a monomer with dicarboxylic acid end group. Two types of aromatic dianhydride (viz. pyromellitic dianhydride (PMDA) and 3,3′,4,4′-sulfonyldiphthalic anhydride (DSDA)), were also reacted with excess 4,4′-diphenyl-methane diisocyanate to form polyimide prepolymers terminated with an isocyanate group. The prepolymers was further extended with the diacid monomer to form a nitro group containing aromatic poly(amide-imide) copolymers. The nitro groups in these copolymers were hydrogenated to form amine groups and cyclized at 180 ^○C, to form the poly(benzimidazole amide imide) copolymers in polyphosphoric acid which acted as a cyclization agent. The resulting copolymers can be soluble in sulfuric acid and polyphosphoric acid, in sulfolane under heating to 100 ^○C, and in polar solvent N-methyl-2-pyrrolidone under heating to 100 ^○C with 5% lithium chloride. From the DSC and TGA measurements, it demonstrated that the glass transition temperature of copolymers exhibits a range of 270∼322 ^○C. The 10% weight loss temperatures exhibits a range of 460∼541 ^○C in nitrogen, and 441∼529 ^○C in air, respectively. The activation energy and the integration parameter of degradation temperature of the copolymers were evaluated by the Doyle–Ozawa method. It indicated that these copolymers exhibited good thermal and thermo-oxidative stability with the increase of imide content.     

Preparation of iodine containing quaternary amine methacrylate copolymers and their contact killing antimicrobial properties

A novel quaternary amine methacrylate monomer (QAMA) was synthesized by amination of dimethacrylate with piperazine followed by its quaternization using an alkyl iodide. Copolymerization of QAMA with 2‐hydroxyethyl methacrylate was carried out by free radical bulk polymerization technique at room temperature using ammonium persulfate and N,N,N′,N′‐tetramethyl ethylenediamine as a redox initiator. The monomer as well as copolymers was characterized by FTIR and ¹H NMR spectral studies. Thermal and physical characteristics of copolymers of varying compositions of QAMA were evaluated by thermogravimetric analysis, differential calorimetry, contact angle and scanning electron microscopy. The antibacterial activity of the synthesized quaternary amine dimethacrylate copolymers against Escherichia coli and Staphylococcus aureus was studied by zone of inhibition and colony count method. QAMA copolymers showed broad‐spectrum contact killing antibacterial properties without releasing any active agent as checked by iodide‐selective ion meter. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1038–1044, 2006     

Synthesis and characterization of novel fluorine‐containing methacrylate copolymers: Reactivity ratios,thermal properties,and antimicrobial activity

The free‐radical‐initiated copolymerization of 2‐(4‐acetylphenoxy)‐2‐oxoethyl‐2‐methylacrylate (AOEMA) and 2‐(4‐benzoylphenoxy)‐2‐oxoethyl‐2‐methylacrylate (BOEMA) with 2‐[(4‐fluorophenyoxy]‐2‐oxoethyl‐2‐methylacrylate (FPEMA) were carried out in 1,4‐dioxane solution at 65°C using 2,2′‐azobisisobutyronitrile as an initiator with different monomer‐to‐monomer ratios in the feed. The monomers and copolymers were characterized by FTIR and ¹H‐ and ¹³C‐NMR spectral studies. ¹H‐NMR analysis was used to determine the molar fractions of AOEMA, BOEMA, and FPEMA in the copolymers. The reactivity ratios of the monomers were determined by the application of Fineman‐Ross and Kelen‐Tudos methods. The analysis of reactivity ratios revealed that BOEMA and AOEMA are less reactive than FPEMA, and copolymers formed are statistically in nature. The molecular weights (M _w and M _n) and polydispersity index of the polymers were determined using gel permeation chromatography. Thermogravimetric analysis of the polymers reveals that the thermal stability of the copolymers increases with an increase in the mole fraction of FPEMA in the copolymers. Glass transition temperatures of the copolymers were found to decrease with an increase in the mole fraction of FPEMA in the copolymers. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of biodegradable polymers composed of 3,4-dihydroxycinnamic acid and poly(ethylene glycol)

A novel series of biodegradable copolymers were synthesized by the thermal polycondensation of 3,4-dihydroxycinnamic acid (DHCA) and poly(ethylene glycol) (PEG). The copolymers were characterized by ¹H-NMR, Fourier transform infrared spectroscopy, and gel permeation chromatography. It was found that the incorporation of PEG reduced the glass-transition temperature (T_g) of the copolymers, and T_g decreased with increasing amount of PEG in the compositions. The fluorescence spectroscopy revealed that the homopolymer and copolymers of DHCA gave a higher fluorescence emission intensity than that of DHCA monomer, of which the strongest fluorescence emission peak occurred in the copolymers containing a small amount of PEG. X-ray diffraction spectra demonstrated that poly(3,4-dihydroxycinnamic acid) and copolymer were amorphous; this indicated the facile biodegradability of the copolymers. Furthermore, copolymer micelles formed by self-assembly were investigated. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Comparison of micelles formed by amphiphilic poly(ethylene glycol)‐b‐poly(trimethylene carbonate) star block copolymers

In this article, we describe the synthesis and solution properties of PEG‐b‐PTMC star block copolymers via ring‐opening polymerization (ROP) of trimethylene carbonate (TMC) monomer initiated at the hydroxyl end group of the core PEG using HCl Et₂O as a monomer activator. The ROP of TMC was performed to synthesize PEG‐b‐PTMC star block copolymers with one, two, four, and eight arms. The PEG‐b‐PTMC star block copolymers with same ratio of between hydrophobic PTMC and hydrophilic PEG segments were obtained in quantitative yield and exhibited monomodal GPC curves. The amphiphilic PEG‐b‐PTMC star block copolymers formed spherical micelles with a core–shell structure in an aqueous phase. The mean hydrodynamic diameters of the micelles increased from 17 to 194 nm with increasing arm number. As arm number increased, the critical micelle concentration (CMC) of the PEG‐b‐PTMC star block copolymers increased from 3.1 × 10^?3 to 21.1 × 10^?3 mg/mL but the partition equilibrium constant, which is an indicator of the hydrophobicity of the micelles of the PEG‐b‐PTMC star block copolymers in aqueous media, decreased from 4.44 × 10⁴ to 1.34 × 10⁴. In conclusion, we confirmed that the PEG‐b‐PTMC star block copolymers form micelles and, hence, may be potential hydrophobic drug delivery vehicles. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Lamotrigine‐loaded polyacrylate nanoparticles synthesized through emulsion polymerization

A series of copolymeric nanoparticles of the partially water‐soluble monomer ethyl methacrylate and the water‐soluble monomer 2‐hydroxyl ethyl methacrylate were synthesized from emulsions containing sodium dodecyl sulfate via free‐radical polymerization. Lamotrigine, as a model drug, was loaded in nanoparticles during in situ polymerization. A stable and transparent poly(ethyl methacrylate‐co‐hydroxyl ethyl methacrylate) nanolatex was produced for all compositions and characterized for particle size by dynamic light scattering and transmission electron microscopy. Particles were found to be smaller than 50 nm in size. Structural characterization of copolymers was done by infrared spectrometry, gel permeation chromatography, and NMR spectroscopy. Drug encapsulation efficiency was determined by ultraviolet (UV)–visible spectrometry and was found to be 26–62% for copolymers with different compositions. UV data suggest molecular‐level dispersion of the drug in the nanoparticles. In vitro drug‐release studies showed the controlled release of lamotrigine. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Bioengineering functional copolymers: V. Synthesis,LCST, and thermal behavior of poly(N‐isopropyl acrylamide‐co‐p‐vinylphenylboronic acid)

New boron‐containing stimuli‐responsive (pH‐ and temperature‐sensitive) copolymers were synthesized and characterized. Structure and composition of copolymers were determined by FTIR and ¹H‐NMR spectroscopy, and elemental analysis and titration (N and B contents for NIPA and VPBA unit, respectively). By DSC and XRD measurements, it is established that the synthesized copolymers have a semicrystalline structure due to formation of intra‐ and/or intermolecular H‐bonded supramolecular architecture. The copolymer composition–structure–property relationship indicates semicrystalline structure of copolymers with different compositions, degrees of crystallinity, and thermal and stimuli‐responsive behaviors depends on the content of boron‐containing monomer linkage. Results of DSC, DTA, and TGA analyses indicated that copolymers have T_g and T_m and high thermal stability. These water‐soluble and temperature‐ and pH‐sensitive amphiphilic copolymers can be used as polymeric carries for delivery of biological entities for diverse biomedical use, including boron neutron capture therapy. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 573–582, 2005     

Studies of crosslinked styrene–alkyl acrylate copolymers for oil absorbency application. I. Synthesis and characterization

The prepolymers for a novel oil absorbent were synthesized by copolymerizing styrene with 2‐ethylhexyl acrylate (EHA), lauryl acrylate (LA), lauryl methacrylate (LMA), and stearyl acrylate (SA). Suspension polymerization was carried out using benzoyl peroxide (BPO) as an initiator with a varying monomer feed ratio, and the copolymers were characterized by FTIR, ¹H‐NMR, DSC, and a solubility test. The copolymers were random copolymers with a single phase, and their compositions were similar to those in the monomer feed. The T_g of the copolymer could be controlled by varying the styrene/acrylate ratio. Acrylates introduced the crosslinking to linear polymers as a side reaction. Crosslinked copolymers were synthesized by adding divinylbenzene (DVB) as a crosslinking agent. At a low degree of crosslinking (0.5 wt % DVB), the T_g of the crosslinked copolymers was lower than or similar to that of the uncrosslinked ones. At a high degree of crosslinking, the T_g increased with increasing crosslinking density. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 903–913, 2000     

High molecular weight diblock and ABA/ABC triblock copolymers of tert‐butyl (meth)acrylate

AB diblock copolymers were prepared by use of poly(tert‐butyl (meth)acrylate) (PtBA/PtBMA) as monofunctional macroinitiator in atom transfer radical polymerization of various (meth)acrylates (methyl, butyl) in the presence of the CuBr/N, N, N′, N′, N″‐pentamethyldiethylenetriamine catalyst system. Then using the diblock copolymer as macroinitiator with a bromine atom at the chain end, ABC and ABA triblock copolymers containing at least one PtBA or PtBMA segment were synthesized via polymerization of the selected (meth)acrylic monomer. Gel permeation chromatography was applied to determine molecular weights and polydispersity indices. The latter, for block copolymers prepared without deactivator addition, were in the range 1.2‐1.6 with a high degree of polymerization (150‐500). The chemical compositions of the block copolymers were characterized with ¹H nuclear magnetic resonance. The kind of combined segments and their lengths influenced the glass transition temperature (T_g) determined by differential scanning calorimetry. Copyright © 2012 Society of Chemical Industry     

Synthesis of thermosensitive glycopolymers containing D‐glucose residue: Copolymers with N‐isopropylacrylamide

A new glycomonomer, 3‐acrylamido‐3‐deoxy‐1,2:5,6‐di‐O‐isopropylidene‐α‐D ‐glucofuranose, was synthesized from D ‐glucose. This monomer was homopolymerized and copolymerized with N‐isopropylacrylamide in different compositions by free‐radical polymerization. The composition of the copolymer was determined with ¹H‐NMR spectroscopy. On acid hydrolysis, water‐soluble deprotected copolymers were obtained. The protected and deprotected copolymers showed a sharp cloud‐point temperature. A linear correlation was obtained between the lower critical solution temperatures and the concentration of glycomonomer in the copolymers © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis of N-(2 amino benzothiazole) methacylamide monomer and its copolymers for antimicrobial coating application by RAFT polymerization

Monomer with thiazole moiety was synthesized and copolymerized with butyl acrylate and methyl methacrylate by reversible addition fragmentation chain transfer emulsion polymerization. The chain transfer agent was synthesized using N-ethyl piperazine, carbon disulfide, and ethyl 2-bromoisobutyrate. The wt% of monomer was varied from 3, 5, 7, 9, and 12 respectively. A antimicrobial activities of monomer and its copolymers were screened against E. coli, B. subtilis, C. albicans, and Aspergillus niger microorganisms. The synthesized monomer and chain transfer agent were characterized by ¹H NMR, FTIR, and mass spectral analysis, whereas emulsion copolymers were characterized for their molecular weight, particle size, and FTIR analysis.     

Novel poly(ε-caprolactone)s bearing amino groups: Synthesis,characterization and biotinylation

A novel functional ε-caprolactone monomer containing protected amino groups, γ-(carbamic acid benzyl ester)-ε-caprolactone (γCABεCL), was successfully synthesized. A series of copolymers [poly(CL-co-CABCL)] were prepared by ring-opening polymerization of ε-caprolactone (CL) and γCABεCL in bulk using tin (II)-2-ethylhexanoate [Sn(Oct)₂] as catalyst. The morphology of the copolymers changed from semi-crystalline to amorphous with increasing γCABεCL monomer content. They were further converted into deprotected copolymers [poly(CL-co-ACL)] with free amino groups by hydrogenolysis in the presence of Pd/C. After deprotection, the free amino groups on the copolymer were further modified with biotin. The monomer and the corresponding copolymers were characterized by ¹H NMR, ¹³C NMR, FT-IR, mass, GPC and DSC analysis. The obtained data have confirmed the desired monomer and copolymer structures.