Efficient Light‐Emitting Electrochemical Cells (LECs) Based on Ionic Iridium(III) Complexes with 1,3,4‐Oxadiazole Ligands

Eight new iridium(III) complexes 1‐8 , with 1,3,4‐oxadiazole (OXD) derivatives as the cyclometalated C^N ligand and/or the ancillary N^N ligands are synthesized and their electrochemical, photophysical, and solid‐state light‐emitting electrochemical cell (LEC) properties are investigated. Complexes 1 , 2 , 7 and 8 are additionally characterized by single crystal X‐ray diffraction. LECs based on complexes 1‐8 are fabricated with a structure indium tin oxide (ITO)/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS)/cationic iridium complex:ionic liquid/Al. LECs of complexes 1 – 6 with OXD derivatives as the cyclometalated ligands and as the ancillary ligand show yellow luminescence (λ_max = 552–564 nm). LECs of complexes 7 and 8 with cyclometalated C^N phenylpyridine ligands and an ancillary N^N OXD ligand show red emission (λ_max 616–624 nm). Using complex 7 external quantum efficiency (EQE) values of >10% are obtained for devices (210 nm emission layer) at 3.5 V. For thinner devices (70 nm) high brightness is achieved: red emission for 7 (8528 cd m^?2 at 10 V) and yellow emission for 1 (3125 cd m^?2 at 14 V).     

Blue‐Emitting Cationic Iridium Complexes with 2‐(1H‐Pyrazol‐1‐yl)pyridine as the Ancillary Ligand for Efficient Light‐Emitting Electrochemical Cells

Two blue‐emitting cationic iridium complexes with 2‐(1H‐pyrazol‐1‐yl)pyridine (pzpy) as the ancillary ligands, namely, [Ir(ppy)₂(pzpy)]PF₆ and [Ir(dfppy)₂(pzpy)]PF₆ (ppy is 2‐phenylpyridine, dfppy is 2‐(2,4‐difluorophenyl) pyridine, and PF₆^? is hexafluorophosphate), have been prepared, and their photophysical and electrochemical properties have been investigated. In CH₃CN solutions, [Ir(ppy)₂(pzpy)]PF₆ emits blue‐green light (475 nm), which is blue‐shifted by more than 100 nm with respect to the typical cationic iridium complex [Ir(ppy)₂(dtb‐bpy)]PF₆ (dtb‐bpy is 4,4′‐di‐tert‐butyl‐2,2′‐bipyridine); [Ir(dfppy)₂(pzpy)]PF₆ with fluorine‐substituted cyclometalated ligands shows further blue‐shifted light emission (451 nm). Quantum chemical calculations reveal that the emissions are mainly from the ligand‐centered ³π–π* states of the cyclometalated ligands (ppy or dfppy). Light‐emitting electrochemical cells (LECs) based on [Ir(ppy)₂(pzpy)]PF₆ gave green‐blue electroluminescence (486 nm) and had a relatively high efficiency of 4.3 cd A^?1 when an ionic liquid 1‐butyl‐3‐methylimidazolium hexafluorophosphate was added into the light‐emitting layer. LECs based on [Ir(dfppy)₂(pzpy)]PF₆ gave blue electroluminescence (460 nm) with CIE (Commission Internationale de L'Eclairage) coordinates of (0.20, 0.28), which is the bluest light emission for iTMCs‐based LECs reported so far. Our work suggests that using diimine ancillary ligands involving electron‐donating nitrogen atoms (like pzpy) is an efficient strategy to turn the light emission of cationic iridium complexes to the blue region.     

Blue‐Emitting Iridium(III) Complexes for Light‐Emitting Electrochemical Cells: Advances,Challenges, and Future Prospects

Light‐emitting electrochemical cells (LECs) are one of the most promising technologies for solid‐sate lighting. Among them, LECs based on phosphorescent iridium(III) complexes have attracted significant research interest in the past 15 years, because of their high efficiency and tunable emission color across the entire visible spectrum. To fabricate white LECs for lighting, high‐performance blue LECs are the first prerequisite. Huge efforts have been devoted to improving the performances of blue LECs based on iridium(III) complexes either by developing new blue‐emitting complexes or by engineering the devices. Nevertheless, blue LECs have still shown much lower performances (brightness, efficiency, stability, etc.) compared to the red, orange‐red, yellow, and green counterpart devices. In particular, a single blue LEC with satisfactory blue‐color purity, high efficiency, and high stability is still missing. Here, the advances in blue‐emitting iridium(III) complexes for LECs and the device engineering on LECs using the complexes are reported. The challenges ahead are discussed, and future prospects are outlined.     

Efficient and Long Lived Green Light‐Emitting Electrochemical Cells

The combination of high efficiencies and long lifetime in a single light‐emitting electrochemical cell (LEC) device remain a major problem in LEC technology, preventing its application in commercial lighting devices. Three green light‐emitting cationic iridium‐based complexes of the general composition [Ir(C^{^}N)₂(N^{^}N)][PF₆] with 4‐Fppy (2‐(4‐fluorophenyl)pyridinato) as the cyclometalating C^{^}N ligand and 1,10‐phenanthroline ( 1 ), 4,7‐diphenyl‐1,10‐phenanthroline (bathophenanthroline, bphen, 2 ), and 2,9‐dimethyl‐4,7‐diphenyl‐1,10‐phenanthroline (bathocuprione, dmbphen, 3 ) as ancillary N^{^}N ligands are synthesized and characterized. Computational studies are carried out in order to compare the electronic structure of the three ionic transition metal complexes (iTMCs) and provide insights into their potential as LEC emitter materials. LECs are then fabricated with complexes 1 – 3 . Driven under a pulsed current, they display a high luminance and current and power efficiencies. As the LEC based on complex 2 displays the overall best device performance, including the longest lifetime of 474 h, it is selected for subsequent driving conditions optimization. An extraordinary power efficiency of 25 lm W^?1 and current efficiency of 30 cd A^?1 are achieved under optimized operation conditions with reduced current density, resulting in a long device lifetime of 720 h. Altogether, ligand design in iTMCs and optimization of the device driving conditions leads to a significant improvement in LEC performance.     

Scrutinizing Design Principles toward Efficient,Long‐Term Stable Green Light‐Emitting Electrochemical Cells

Enhancing the efficiency and lifetime of light emitting electrochemical cells (LEC) is the most important challenge on the way to energy efficient lighting devices of the future. To avail this, emissive Ir(III) complexes with fluoro‐substituted cyclometallated ligands and electron donating groups (methyl and tert ‐butyl)‐substituted diimine ancillary (N^{^}N) ligands and their associated LEC devices are studied. Four different complexes of general composition [Ir(4ppy)₂(N^{^}N)][PF₆] (4Fppy = 2‐(4‐fluorophenyl)pyridine) with the N^{^}N ligand being either 2,2′‐bipyridine ( 1 ), 4.4′‐dimethyl‐2,2′‐bipyridine ( 2 ), 5.5′‐dimethyl‐2,2′‐bipyridine ( 3 ), or 4.4′‐di‐tert ‐butyl‐2,2′‐bipyridine ( 4 ) are synthesized and characterized. All complexes emit in the green region of light with emission maxima of 529–547 nm and photoluminescence quantum yields in the range of 50.6%–59.9%. LECs for electroluminescence studies are fabricated based on these complexes. The LEC based on ( 1 ) driven under pulsed current mode demonstrated the best performance, reaching a maximum luminance of 1605 cd m^?2 resulting in 16 cd A^?1 and 8.6 lm W^?1 for current and power efficiency, respectively, and device lifetime of 668 h. Compared to this, LECs based on ( 3 ) and ( 4 ) perform lower, with luminance and lifetime of 1314 cd m^?2, 45.7 h and 1193 cd m^?2, 54.9 h, respectively. Interestingly, in contrast to common belief, the fluorine content of the Ir‐iTMCs does not adversely affect the LEC performance, but rather electron donating substituents on the N^{^}N ligands are found to dramatically reduce both performance and stability of the green LECs. In light of this, design concepts for green light emitting electrochemical devices have to be reconsidered.     

White Organic Light‐Emitting Diodes with Evenly Separated Red,Green, and Blue Colors for Efficiency/Color‐Rendition Trade‐Off Optimization

A novel yellowish‐green triplet emitter, bis(5‐(trifluoromethyl)‐2‐p‐tolylpyridine) (acetylacetonate)iridium(III) (1), was conveniently synthesized and used in the fabrication of both monochromatic and white organic light‐emitting diodes (WOLEDs). At the optimal doping concentration, monochromatic devices based on 1 exhibit a high efficiency of 63 cd A^?1 (16.3% and 36.6 lm W^?1) at a luminance of 100 cd m^?2. By combining 1 with a phosphorescent sky‐blue emitter, bis(3,5‐difluoro‐2‐(2‐pyridyl)phenyl)‐(2‐carboxypyridyl)iridium(III) (FIrPic), and a red emitter, bis(2‐benzo[b]thiophen‐2‐yl‐pyridine)(acetylacetonate)iridium(III) (Ir(btp)₂(acac)), the resulting electrophosphorescent WOLEDs show three evenly separated main peaks and give a high efficiency of 34.2 cd A^?1 (13.2% and 18.5 lm W^?1) at a luminance of 100 cd m^?2. When 1 is mixed with a deep‐blue fluorescent emitter, 4,4′‐bis(9‐ethyl‐3‐carbazovinylene)‐1,1′‐biphenyl (BCzVBi), and Ir(btp)₂(acac), the resulting hybrid WOLEDs demonstrate a high color‐rendering index of 91.2 and CIE coordinates of (0.32, 0.34). The efficient and highly color‐pure WOLEDs based on 1 with evenly separated red, green, blue peaks and a high color‐rendering index outperform those of the state‐of‐the‐art emitter, fac‐tris(2‐phenylpyridine)iridium(III) (Ir(ppy)₃), and are ideal candidates for display and lighting applications.     

White‐Light‐Emitting Diodes Based on Iridium Complexes via Efficient Energy Transfer from a Conjugated Polymer

Efficient white‐light‐emitting diodes (WLEDs) have been developed using a polyfluorene‐type blue‐emitting conjugated polymer doped with green and red phosphorescent dyes. The emission spectrum of the conjugated polymer, which has a very high luminescent efficiency, shows a large spectral overlap with the absorbance of green and red iridium complexes. Also, efficient energy transfer from the conjugated polymer to the iridium complexes is observed. Poly(N‐vinyl carbazole) is used to improve the miscibility between conjugated polymer and iridium complexes because of their poor chemical compatibility and phase separation. A white emission spectrum is easily obtained by varying the contents of the three materials and controlling the phase morphology. Moreover, these WLEDs show a voltage‐independent electroluminescence owing to the threshold and driving voltage of the three materials being similar as a result of energy transfer.     

Synthesis and Characterization of Red‐Emitting Iridium(III) Complexes for Solution‐Processable Phosphorescent Organic Light‐Emitting Diodes

A new series of highly efficient red‐emitting phosphorescent Ir(III) complexes, (Et‐CVz‐PhQ)₂Ir(pic‐N‐O), (Et‐CVz‐PhQ)₂Ir(pic), (Et‐CVz‐PhQ)₂Ir(acac), (EO‐CVz‐PhQ)₂Ir(pic‐N‐O), (EO‐CVz‐PhQ)₂Ir(pic), and (EO‐CVz‐PhQ)₂Ir(acac), based on carbazole (CVz)‐phenylquinoline (PhQ) main ligands and picolinic acid N‐oxide (pic‐N‐O), picolinic acid (pic), and acetylacetone (acac) ancillary ligands, are synthesized for phosphorescent organic light‐emitting diodes (PhOLEDs), and their photophysical, electrochemical, and electroluminescent (EL) properties are investigated. All of the Ir(III) complexes have high thermal stability and emit an intense red light with an excellent color purity at CIE coordinates of (0.65,0.34). Remarkably, high‐performance solution‐processable PhOLEDs were fabricated using Ir(III) complexes with a pic‐N‐O ancillary ligand with a maximum external quantum efficiency (5.53%) and luminance efficiency (8.89 cd A^?1). The novel use of pic‐N‐O ancillary ligand in the synthesis of phosphorescent materials is reported. The performance of PhOLEDs using these Ir(III) complexes correlates well with the results of density functional theory calculations.     

Versatile,Benzimidazole/Amine‐Based Ambipolar Compounds for Electroluminescent Applications: Single‐Layer,Blue, Fluorescent OLEDs,Hosts for Single‐Layer,Phosphorescent OLEDs

A series of compounds containing arylamine and 1,2‐diphenyl‐1H‐benz[d]imidazole moieties are developed as ambipolar, blue‐emitting materials with tunable blue‐emitting wavelengths, tunable ambipolar carrier‐transport properties and tunable triplet energy gaps. These compounds possess several novel properties: (1) they emit in the blue region with high quantum yields; (2) they have high morphological stability and thermal stability; (3) they are capable of ambipolar carrier transport; (4) they possess tunable triplet energy gaps, suitable as hosts for yellow‐orange to green phosphors. The electron and hole mobilities of these compounds lie in the range of 0.68–144 × 10^?6 and 0.34–147 × 10^?6 cm² V^?1 s^?1, respectively. High‐performance, single‐layer, blue‐emitting, fluorescent organic light‐emitting diodes (OLEDs) are achieved with these ambipolar materials. High‐performance, single‐layer, phosphorescent OLEDs with yellow‐orange to green emission are also been demonstrated using these ambipolar materials, which have different triplet energy gaps as the host for yellow‐orange‐emitting to green‐emitting iridium complexes. When these ambipolar, blue‐emitting materials are lightly doped with a yellow‐orange‐emitting iridium complex, white organic light‐emitting diodes (WOLEDs) can be achieved, as well by the use of the incomplete energy transfer between the host and the dopant.     

Rationalizing Fabrication and Design Toward Highly Efficient and Stable Blue Light‐Emitting Electrochemical Cells Based on NHC Copper(I) Complexes

Recently, the use of a new family of electroluminescent copper(I) complexes—i.e., the archetypal [Cu(IPr)(3‐Medpa)][PF₆] complex; IPr: 1,3‐bis‐(2,6‐di‐iso‐propylphenyl)imidazole‐2‐ylidene; 3‐Medpa: 2,2′‐bis‐(3‐methylpyridyl)amine—has led to blue light‐emitting electrochemical cells (LECs) featuring luminances of 20 cd m^?2, stabilities of 4 mJ, and efficiencies of 0.17 cd A^?1. Herein, this study rationalizes how to enhance these figures‐of‐merit optimizing both device fabrication and design. On one hand, a comprehensive spectroscopic and electrochemical study reveals the degradation of this novel emitter in common solvents used for LEC fabrication, as well as the impact on the photoluminescence features of thin‐films. On the other hand, spectro‐electrochemical and electrochemical impedance spectroscopy assays suggest that the device performance is strongly limited by the irreversible formation of oxidized species that mainly act as carrier trappers and luminance quenchers. Based on all of the aforementioned, device optimization was realized using ionic additives and a hole transporter either as a host–guest or as a multilayered architecture approach to decouple hole/electron injection. The latter significantly enhances the LEC performance, reaching luminances of 160 cd m^?2, stabilities of 32.7 mJ, and efficiencies of 1.2 cd A^?1. Overall, this work highlights the need of optimizing both device fabrication and design toward highly efficient and stable LECs based on cationic copper(I) complexes.     

High‐Color‐Rendering and High‐Efficiency White Organic Light‐Emitting Devices Based on Double‐Doped Organic Single Crystals

Organic single crystals with much higher carrier mobility and stability compared to the amorphous organic materials have shown great potential in electronic and optoelectronic devices. However, their applications in white organic light‐emitting devices (WOLEDs), especially the three‐color‐strategy WOLEDs, have been hindered by the difficulties in fabricating complicated device structures. Here, double‐doped white‐emission organic single crystals are used as the active layers for the first time in the three‐color‐strategy WOLEDs by co‐doping the red and green dopants into blue host crystals. Precise control of the dopant concentration in the double‐doped crystals results in moderately partial energy transfer from the blue donor to the green and red dopants, and thereafter, simultaneous RGB emissions with balanced emission intensity. The highest color‐rendering index (CRI) and efficiency, to the best of the authors' knowledge, are obtained for the crystal‐based WOLEDs. The CRI of the WOLEDs varies between 80 and 89 with the increase of the driving current, and the luminance and current efficiency reach up to 793 cd m^?2 and 0.89 cd A^?1, respectively. The demonstration of the present three‐color organic single‐crystal‐based WOLED promotes the development of the single crystals in optoelectronics.     

Binaphthyl‐Containing Green‐ and Red‐Emitting Molecules for Solution‐Processable Organic Light‐Emitting Diodes

Strong intermolecular interactions usually result in decreases in solubility and fluorescence efficiency of organic molecules. Therefore, amorphous materials are highly pursued when designing solution‐processable, electroluminescent organic molecules. In this paper, a non‐planar binaphthyl moiety is presented as a way of reducing intermolecular interactions and four binaphthyl‐containing molecules ( BNCM s): green‐emitting BBB and TBT as well as red‐emitting BTBTB and TBBBT , are designed and synthesized. The photophysical and electrochemical properties of the molecules are systematically investigated and it is found that TBT , TBBBT , and BTBTB solutions show high photoluminescence (PL) quantum efficiencies of 0.41, 0.54, and 0.48, respectively. Based on the good solubility and amorphous film‐forming ability of the synthesized BNCM s, double‐layer structured organic light‐emitting diodes (OLEDs) with BNCM s as emitting layer and poly(N‐vinylcarbazole) (PVK) or a blend of poly[N,N′‐bis(4‐butylphenyl)‐N,N′‐bis(phenyl)benzidine] and PVK as hole‐transporting layer are fabricated by a simple solution spin‐coating procedure. Amongst those, the BTBTB based OLED, for example, reaches a high maximum luminance of 8315 cd · m⁻² and a maximum luminous efficiency of 1.95 cd · A⁻¹ at a low turn‐on voltage of 2.2 V. This is one of the best performances of a spin‐coated OLED reported so far. In addition, by doping the green and red BNCM s into a blue‐emitting host material poly(9,9‐dioctylfluorene‐2,7‐diyl) high performance white light‐emitting diodes with pure white light emission and a maximum luminance of 4000 cd · m⁻² are realized.     

Optimization of Orange‐Emitting Electrophosphorescent Copolymers for Organic Light‐Emitting Diodes

Orange‐emitting phosphorescent copolymers containing iridium complexes and bis(carbazolyl)fluorene groups in their side chains are employed as the emissive layer in multilayer organic light‐emitting diodes (OLEDs). The efficiency of the OLED devices is optimized by varying characteristics of the copolymers: the molecular weight, the iridium loading level, and the nature and length of the linker between the side chains and the polymer backbone. A maximum efficiency of 4.9 ± 0.4%, 8.8 ± 0.7 cd A⁻¹ at 100 cd m⁻² is achieved with an optimized copolymer.     

Organometal Halide Perovskite Quantum Dot Light‐Emitting Diodes

Organometal halide perovskites quantum dots (OHP‐QDs) with bright, color‐tunable, and narrow‐band photoluminescence have significant advantages in display, lighting, and laser applications. Due to sparse concentrations and difficulties in the enrichment of OHP‐QDs, production of large‐area uniform films of OHP‐QDs is a challenging task, which largely impedes their use in electroluminescence devices. Here, a simple dip‐coating method has been reported to effectively fabricate large‐area uniform films of OHP‐QDs. Using this technique, multicolor OHP‐QDs light‐emitting diodes (OQ‐LEDs) emitting in blue, blue‐green, green, orange, and red color have been successfully produced by simply tuning the halide composition or size of QDs. The blue, green, and red OQ‐LEDs exhibited, respectively, a maximum luminance of 2673, 2398, and 986 cd m^?2 at a current efficiency of 4.01, 3.72, and 1.52 cd A^?1, and an external quantum efficiency of 1.38%, 1.06%, and 0.53%, which are much better than most LEDs based on OHP films. The packaged OQ‐LEDs show long‐term stability in air (humidity ≈50%) for at least 7 d. The results demonstrate the great potential of the dip‐coating method to fabricate large‐area uniform films for various QDs. The high‐efficiency OQ‐LEDs also demonstrate the promising potential of OHP‐QDs for low‐cost display, lighting, and optical communication applications.     

The Fabrication and Characterization of Single‐Component Polymeric White‐Light‐Emitting Diodes

By using Ni⁰‐mediated polymerization, we have systematically synthesized a series of fluorene‐based copolymers composed of blue‐, green‐, and red‐light‐emitting comonomers with a view to producing polymers with white‐light emission. 2,7‐Dibromo‐9,9‐dihexylfluorene, {4‐(2‐[2,5‐dibromo‐4‐{2‐(4‐diphenylamino‐phenyl)‐vinyl}‐phenyl]‐vinyl)‐phenyl}‐diphenylamine (DTPA), and 2‐{2‐(2‐[4‐{bis(4‐bromo‐phenyl)amino}‐phenyl]‐vinyl)‐6‐tert‐butyl‐pyran‐4‐ylidene}‐malononitrile (TPDCM) were used as the blue‐, green‐, and red‐light‐emitting comonomers, respectively. It was found that the emission spectra of the resulting copolymers could easily be tuned by varying their DTPA and TPDCM content. Thus with the appropriate red/green/blue (RGB) unit ratio, we were able to obtain white‐light emission from these copolymers. A white‐light‐emitting diode using the polyfluorene copolymer containing 3 % green‐emitting DTPA and 2 % red‐emitting TPDCM (PG3R2) with a structure of indium tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonic acid)/PG3R2/Ca/Al was found to exhibit a maximum brightness of 820 cd m^–2 at 11 V with Commission Internationale de L'Eclairage (CIE) coordinates of (0.33,0.35), which are close to the standard CIE coordinates for white‐light emission (0.33,0.33).     

Novel Blue Bipolar Thermally Activated Delayed Fluorescence Material as Host Emitter for High‐Efficiency Hybrid Warm‐White OLEDs with Stable High Color‐Rendering Index

A novel thermally activated delayed fluorescence (TADF) molecule, PHCz2BP, is synthesized and used to construct high performance organic light‐emitting diodes (OLEDs) in this work. PHCz2BP is not only the neat emitting layer for efficient sky‐blue OLED, with very high peak external quantum efficiency/power efficiency (EQE/PE) values of 4.0%/6.9 lm W^?1, but also acts as a host to sensitize high‐luminance and high‐efficiency green, orange, and red electrophosphorescence with the universal high EQEs of >20%. More importantly, two hybrid white OLEDs based on the double‐layer emitting system of PHCz2BP:green phosphor/PHCz2BP:red phosphor are achieved. To the best of the knowledge, this is the first report for three‐color (blue–green–red) white devices that adopt a TADF blue host emitter and two phosphorescent dopants without any other additional host. Such simple emitting systems thus realized the best electroluminescent performance to date for the WOLEDs utilizing the hybrid TADF/phosphor strategy: forward‐viewing EQEs of 25.1/23.6% and PEs of 24.1/22.5 lm W^?1 at the luminance of 1000 cd m^?2 with the color rendering indexes of 85/87 and warm‐white Commission Internationale de L'Eclairage coordinates of (0.41, 0.46)/(0.42, 0.45), indicating its potential to be used as practical eye‐friendly solid‐state lighting in future.     

Organic Light‐Emitting Diodes with a White‐Emitting Molecule: Emission Mechanism and Device Characteristics

The unique and unprecedented electroluminescence behavior of the white‐emitting molecule 3‐(1‐(4‐(4‐(2‐(2‐hydroxyphenyl)‐4,5‐diphenyl‐1H‐imidazol‐1‐yl)phenoxy)phenyl)‐4,5‐diphenyl‐1H‐imidazol‐2‐yl)naphthalen‐2‐ol (W1), fluorescence emission from which is controlled by the excited‐state intramolecular proton transfer (ESIPT) is investigated. W1 is composed of covalently linked blue‐ and yellow‐color emitting ESIPT moieties between which energy transfer is entirely frustrated. It is demonstrated that different emission colors (blue, yellow, and white) can be generated from the identical emitter W1 in organic light‐emitting diode (OLED) devices. Charge trapping mechanism is proposed to explain such a unique color‐tuned emission from W1. Finally, the device structure to create a color‐stable, color reproducible, and simple‐structured white organic light‐emitting diode (WOLED) using W1 is investigated. The maximum luminance efficiency, power efficiency, and luminance of the WOLED were 3.10 cd A^?1, 2.20 lm W^?1, 1 092 cd m^?2, respectively. The WOLED shows white‐light emission with the Commission Internationale de l′Eclairage (CIE) chromaticity coordinates (0.343, 0.291) at a current level of 10 mA cm^?2. The emission color is high stability, with a change of the CIE chromaticity coordinates as small as (0.028, 0.028) when the current level is varied from 10 to 100 mA cm^?2.     

Efficient Organic Light‐Emitting Diodes based on Sublimable Charged Iridium Phosphorescent Emitters

The synthesis and characterization of two new phosphorescent cationic iridium(III) cyclometalated diimine complexes with formula [Ir( L )₂(N‐N)]⁺(PF₆^–) ( HL = (9,9‐diethyl‐7‐pyridinylfluoren‐2‐yl)diphenylamine); N‐N = 4,4′‐dimethyl‐2,2′‐bipyridine ( 1 ), 4,7‐dimethyl‐1,10‐phenanthroline ( 2 )) are reported. Both complexes are coordinated by cyclometalated ligands consisting of hole‐transporting diphenylamino (DPA)‐ and fluorene‐based 2‐phenylpyridine moieties. Structural information on these heteroleptic complexes has been obtained by using an X‐ray diffraction study of complex 2 . Complexes 1 and 2 are morphologically and thermally stable ionic solids and are good yellow phosphors at room temperature with relatively short lifetimes in both solution and solid phases. These robust iridium complexes can be thermally vacuum‐sublimed and used as phosphorescent dyes for the fabrication of high‐efficiency organic light‐emitting diodes (OLEDs). These devices doped with 5 wt % 1 can produce efficient electrophosphorescence with a maximum brightness of up to 15 610 cd m^–2 and a peak external quantum efficiency of ca. 7 % photons per electron that corresponds to a luminance efficiency of ca. 20 cd A^–1 and a power efficiency of ca. 19 lm W^–1. These results show that charged iridium(III) materials are useful alternative electrophosphors for use in evaporated devices in order to realize highly efficient doped OLEDs.     

High‐Performance Hybrid White Organic Light‐Emitting Diodes with Superior Efficiency/Color Rendering Index/Color Stability and Low Efficiency Roll‐Off Based on a Blue Thermally Activated Delayed Fluorescent Emitter

Thermally activated delayed fluorescence (TADF)‐based white organic light‐emitting diodes (WOLEDs) are highly attractive because the TADF emitters provide a promising alternative route to harvest triplet excitons. One of the major challenges is to achieve superior efficiency/color rendering index/color stability and low efficiency roll‐off simultaneously. In this paper, high‐performance hybrid WOLEDs are demonstrated by employing an efficient blue TADF emitter combined with red and green phosphorescent emitters. The resulting WOLED shows the maximum external quantum efficiency, current efficiency, and power efficiency of 23.0%, 51.0 cd A^?1, and 51.7 lm W^?1, respectively. Moreover, the device exhibits extremely stable electroluminescence spectra with a high color rendering index of 89 and Commission Internationale de L'Eclairage coordinates of (0.438, 0.438) at the practical brightness of 1000 cd m^?2. The achievement of these excellent performances is systematically investigated by versatile experimental and theoretical evidences, from which it is concluded that the utilization of a blue‐green‐red cascade energy transfer structure and the precise manipulation of charges and excitons are the key points. It can be anticipated that this work might be a starting point for further research towards high‐performance hybrid WOLEDs.     

Light‐Emitting Paper

A solution‐based fabrication of flexible and light‐weight light‐emitting devices on paper substrates is reported. Two different types of paper substrates are coated with a surface‐emitting light‐emitting electrochemical cell (LEC) device: a multilayer‐coated specialty paper with an intermediate surface roughness of 0.4 μm and a low‐end and low‐cost copy paper with a large surface roughness of 5 μm. The entire device fabrication is executed using a handheld airbrush, and it is notable that all of the constituent layers are deposited from solution under ambient air. The top‐emitting paper‐LECs are highly flexible, and display a uniform light emission with a luminance of 200 cd m^?2 at a current conversion efficacy of 1.4 cd A^?1.