Thermal and mechanical properties of plasticized poly(L‐lactic acid)

Acetyl tri‐n‐butyl citrate (ATBC) and poly(ethyleneglycol)s (PEGs) with different molecular weights (from 400 to 10000) were used in this study to plasticize poly(L‐lactic acid) (PLA). The thermal and mechanical properties of the plasticized polymer are reported. Both ATBC and PEG are effective in lowering the glass transition (T_g) of PLA up to a given concentration, where the plasticizer reaches its solubility limit in the polymer (50 wt % in the case of ATBC; 15–30 wt %, depending on molecular weight, in the case of PEG). The range of applicability of PEGs as PLA plasticizers is given in terms of PEG molecular weight and concentration. The mechanical properties of plasticized PLA change with increasing plasticizer concentration. In all PLA/plasticizer systems investigated, when the blend T_g approaches room temperature, a stepwise change in the mechanical properties of the system is observed. The elongation at break drastically increases, whereas tensile strength and modulus decrease. This behavior occurs at a plasticizer concentration that depends on the T_g‐depressing efficiency of the plasticizer. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1731–1738, 2003     

Crystallization behavior of poly(L‐lactic acid)/montmorillonite nanocomposites

In this study, we modified montmorillonite (MMT) with dilauryl dimethyl ammonium bromide (DDAB) and then exfoliated the structures in a poly(L ‐lactic acid) (PLLA) matrix. We used polar optical microscopy and X‐ray diffraction (XRD) to examine the morphologies of the resulting composites, differential scanning calorimetry to study the melting and crystallization behavior, and Fourier transform infrared (FTIR) and Raman spectroscopy to measure the influence of the intermolecular interactions between PLLA and MMT on the isothermal crystallization temperature. We found that the DDAB‐modified MMT was distributed uniformly in the PLLA matrix. At temperatures ranging from 130 to 140°C, the crystalline morphology resembled smaller Maltese cross‐patterned crystallites; at temperatures from 150 to 170°C, however, the number of crystallites decreased, their sizes increased, and they possessed ringed spherulite structures. In the XRD spectra, the intensity of the diffraction peaks of the 200/110 and 203 facets of the PLLA/MMT nanocomposites decreased as the crystallization temperature increased. In the FTIR spectra, the absorption peak of the C?O groups split into two signals at 1748 and 1755 cm^?1 when the isothermal crystallization temperature was higher than 140°C. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Crystallization behavior and mechanical properties of poly(ethylene oxide)/poly(L‐lactide)/poly(vinyl acetate) blends

Poly(vinyl acetate) (PVAc) was added to the crystalline blends of poly(ethylene oxide) (PEO) and poly(L ‐lactide) (PLLA) (40/60) of higher molecular weights, whereas diblock and triblock poly(ethylene glycol)–poly(L ‐lactide) copolymers were added to the same blend of moderate molecular weights. The crystallization rate of PLLA of the blend containing PVAc was reduced, as evidenced by X‐ray diffraction measurement. A ringed spherulite morphology of PLLA was observed in the PEO/PLLA/PVAc blend, attributed to the presence of twisted lamellae, and the morphology was affected by the amount of PVAc. A steady increase in the elongation at break in the solution blend with an increase in the PVAc content was observed. The melting behavior of PLLA and PEO in the PEO/PLLA/block copolymer blends was not greatly affected by the block copolymer, and the average size of the dispersed PEO domain was not significantly changed by the block copolymer. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 3618–3626, 2001     

Thermal,mechanical, and rheological properties of plasticized poly(L‐lactic acid)

Polylactide (PLA) is an attractive candidate for replacing petrochemical polymers because it is biodegradable. In this study, a specific PLA 2002D was melt‐mixed with a new plasticizer: glycerol monostearate (GMS). The PLA/GMS blends with different ratios were analyzed by dynamic mechanical analysis and differential scanning calorimetry. Although a slightly phase separation can be seen in DSC curves, the SEM micrographs of the impact fracture surfaces of PLA/GMS blends had a relatively good separation and this phenomenon was in good agreement with their higher impact strength. The result showed that the adding of GMS has enhanced the flexibility of PLA/GMS blends as compared to neat PLA. The relationship between complex viscosity and angular frequency of the PLA/GMS blends exhibits that the melt viscosity substantially lower than that of neat PLA. For example, at 10 rad/s, the melt viscosity of PLA/GMS (85/15) was reduced by about 7.2% compared to that of neat PLA. The impact strength was changed from 4.7 KJ/m² for neat PLA to 48.2 KJ/m² for 70/30 PLA/GMS blend. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis and characterization of poly(L‐lactic acid)‐b‐poly(ethylene terephthalate‐co‐sebacate)‐b‐poly(L‐lactic acid) copolyesters

Random copolyester namely, poly(ethylene terephthalate‐co‐sebacate) (PETS), with relatively lower molecular weight was first synthesized, and then it was used as a macromonomer to initiate ring‐opening polymerization of l ‐lactide. ¹H NMR quantified composition and structure of triblock copolyesters [poly(l ‐lactic acid)‐b‐poly(ethylene terephthalate‐co‐sebacate)‐b‐poly(l ‐lactic acid)] (PLLA‐PETS‐PLLA). Molecular weights of copolyesters were also estimated from NMR spectra, and confirmed by GPC. Copolyesters exhibited different solubilities according to the actual content of PLLA units in the main chain. Copolymerization effected melting behaviors significantly because of the incorporation of PETS and PLLA blocks. Crystalline morphology showed a special pattern for specimen with certain composition. It was obvious that copolyesters with more content of aromatic units of PET exhibited increased values in both of stress and modulus in tensile test. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Thermal,crystalline, and mechanical properties of octa(3‐chloropropylsilsesquioxane)/ poly(L‐lactic acid) hybrid films

A series of organic‐inorganic hybrid films were prepared based on octa(3‐chloropropylsilsesquioxane) (OCPS) and poly(L‐lactic acid) (PLLA) via simply solution blending method. The thermal, crystalline and mechanical properties of OCPS/PLLA hybrid films were characterized by Fourier transform infrared, scanning electron microscopy, energy dispersive spectrometer, differential scanning calorimetry (DSC), X‐ray diffraction, polarized optical microscopy, thermogravimetric analysis (TGA), and tensile tests. The results showed that OCPS could be dispersed well at molecular level when its content was less than 3 wt % and began to crystallize in PLLA matrix when the content increased to 5 wt %. DSC study revealed that OCPS acted as a plasticizer to decrease both T_g and T_m of the PLLA matrix at various heating rates. The addition of OCPS did not change the crystal form of PLLA, while had an great influence on the cold crystallization and melting behaviors of PLLA in the second heating cycles. Moreover, the initial crystallinity of OCPS/PLLA was higher than that of pure PLLA. The results suggested that OCPS could be an effective heterogeneous nucleating reagent to promote the crystallization of PLLA. TGA showed that the PLLA thermal degradation mechanism remained unchanged, whereas the weight loss temperatures and residual weights were improved. Tensile tests indicated that the incorporation of OCPS into PLLA matrix changed the tensile behavior of the hybrid films from brittle to ductile, and the strain at break was improved remarkably as a result of the plasticizer effect of OCPS. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Chain extension and mechanical properties of unsaturated aliphatic copolyesters based on poly(L‐lactic acid)

Chain extension of poly(L ‐lactic acid) (PLLA) with unsaturated groups (PLBM) was attempted using benzoyl peroxide (BPO) and the resulting variation in molecular weight and mechanical properties was explored. Bulk copolymerization of L ‐lactic acid (LA)/1,4‐butanediol (BD)/maleic acid (MA) (100/1/1) isomerized some of the cis‐structured maleate units into trans‐structured fumarate units. The optically active LA promoted isomerization during the condensation polymerization. Chain extension of PLBM with BPO did not bring about a discernible increase in the molecular weight when the chain extension was carried out in various solvents with different radical abstraction abilities. In contrast, the hot pressing of PLBM containing BPO increased the molecular weight and sometimes produced chloroform‐insoluble gels depending on the BPO concentration and temperature. The chain extension at low temperatures increased the flexibility of PLBM considerably. However, PLBM lost the flexibility precipitously as the chain‐extension temperature increased above 120°C. The biodegradation rate of PLBM was much slower than that of PLLA. The biodegradation rate was further lowered by the chain extension. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1802–1807, 2003     

Crystallization behavior of partially crosslinked poly(β‐hydroxyalkonates)/poly(butylene succinate) blends

Partially crosslinked poly(β‐hydroxybutyrate‐co‐β‐hydroxyvalerate)/poly(butylene succinate) (PHBV/PBS) and poly(β‐hydroxybutyrate)/poly(butylene succinate) (PHB/PBS) blends were prepared by melt compounding with dicumyl peroxide. The effect of partial crosslinking on crystallization of the PHBV/PBS and PHB/PBS blends was investigated systematically. Differential scanning calorimetry results showed that the overall crystallization rates of both PHBV and PBS in their blends were enhanced considerably by the partial crosslinking. Similar results were also detected in the PHB/PBS blends. The polarized optical microscope observation displayed that the nuclei density of PHBV was increased while the spherulitic morphology did not change much. Conversely, the PBS spherulites turned into cloud‐like morphology after the partial crosslinking which is a result of the decrease in spherulite size, the reduction in interspherulite distance and the interconnection of fine PBS domains. Wide angle X‐ray diffraction patterns confirmed the enhancement in crystallization of the PHBV/PBS blends after the partial crosslinking without modification on crystalline forms of the PHBV and PBS components. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41020.     

Synthesis and properties of crystalline dicarboxylated poly(L‐lactic acid) prepolymers

Crystalline dicarboxylated poly(L ‐lactic acid)s (dcPLLAs) with number‐average molecular weights (M_n's) of 10³ to 10⁴ g/mol were synthesized via the melt polycondensation of L ‐lactic acid (LLA) in the presence of succinic anhydride (SAD), with tin(II) chloride and toluene‐4‐sulfonic acid as binary catalysts. They were characterized by end‐group titration, ¹H‐NMR, differential scanning calorimetry, and wide‐angle X‐ray diffraction. The terminal COOH percentage reached over 98%, and the molecular weight could be controlled by the molar ratio of LLA to SAD. The thermal behaviors depended on the molecular weight. The poly(L ‐lactic acid)s (PLLAs) crystallized slowly for M_n ≤ 2000 but quickly for M_n ≥ 4000. The crystallinity increased from 27 to 40% when M_n grew from 4000 to 10,000. With comparison to ordinary PLLA, the dcPLLA had the same crystallization structure but a slightly lower crystallizability. The glass‐transition temperature was clearly higher than that of amorphous dcPLLAs. With a controllable molecular weight, high COOH percentage, and crystallinity, the dcPLLA with M_n ≥ 4000 appeared to be a suitable prepolymer for the preparation of high‐molecular‐weight crystalline PLLA via chain extension. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Degradation of poly(D,L‐lactic acid)‐b‐poly(ethylene glycol) copolymer and poly(L‐lactic acid) by electron beam irradiation

This article investigated the effects of electron beam (EB) irradiation on poly(D ,L ‐lactic acid)‐b‐poly(ethylene glycol) copolymer (PLEG) and poly(L ‐lactic acid) (PLLA). The dominant effect of EB irradiation on both PLEG and PLLA was chain scission. With increasing dose, recombination reactions or partial crosslinking of PLEG can occur in addition to chain scission, but there was no obvious crosslinking for PLLA at doses below 200 kGy. The chain scission degree of irradiated PLEG and PLLA was calculated to be 0.213 and 0.403, respectively. The linear relationships were also established between the decrease in molecular weight with increasing dose. Elongation at break of the irradiated PLEG and PLLA decreased significantly, whereas the tensile strength and glass transition temperature of PLLA decreased much more significantly compared with PLEG. The presence of poly(ethylene glycol) (PEG) chain segment in PLEG was the key factor in its greater stability to EB irradiation compared with PLLA. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Hydrolytic degradation of poly(l‐lactic acid)/poly(methyl methacrylate) blends

The hydrolytic degradation of poly(l ‐lactic acid)/poly(methyl methacrylate) (PLLA/PMMA) blends was carried out by the immersion of thin films in buffer solutions (pH = 7.24) in a shaking water bath at 60 °C for 38 days. The PLA/PMMA blends (0/100; 30/70; 50/50; 70/30; 100/0) were obtained by melt blending using a Brabender internal mixer and shaped into thin films of about 150 µm in thickness. Considering that PMMA does not undergo hydrolytic degradation, that of PLLA was followed via evolution of PLA molecular weight (recorded by size exclusion chromatography), thermal parameters (differential scanning calorimetry (DSC)) and morphology of the films (scanning transmission electron microscopy). The results reveal a completely different degradation pathway of the blends depending on the polymethacrylate/polyester weight ratio. DSC data suggest that, during hydrolysis at higher PMMA content, the polyester amorphous chains, more sensitive to water, are degraded before being able to crystallize, while at higher PLLA content, the crystallization is favoured leading to a sample more resistant to hydrolysis. In other words, and quite unexpectedly, increasing the content of water‐sensitive PLLA in the PLLA/PMMA blends does not mean de facto faster hydrolytic degradation of the resulting materials. © 2018 Society of Chemical Industry     

Biocomposites based on lignin and plasticized poly(L‐lactic acid)

In this research work, biocomposites based on a ternary system containing softwood Kraft lignin (Indulin AT), poly‐L ‐lactic acid (PLLA) and polyethylene glycol (PEG) have been developed. Two binary systems based on PLLA/PEG and PLLA/lignin have also been studied to understand the role of plasticizer (i.e., PEG) and filler (i.e., lignin) on the overall physicomechanical behavior of PLLA. All samples have been prepared by melt‐blending. A novel approach has also been introduced to improve the compatibility between PLLA and PEG by using a transesterification catalyst under reactive‐mixing conditions. In PEG plasticized PLLA flexibility increases with increasing content of PEG and no significant effect of the molecular weight of PEG on the flexibility of PLLA has been observed. Differential scanning calorimetry and size‐exclusion chromatography along with FTIR analysis show the formation of PLLA‐b‐PEG copolymer for high temperature processed PLLA/PEG systems. On the other hand, binary systems containing lignin show higher stiffness than PLLA/PEG system and good adhesion between the particles and the matrix has been observed by scanning electron microscopy. However, a concomitant good balance in stiffness introduced by the lignin particles and flexibility introduced by PEG has been observed in the ternary systems. This study also showed that high temperature reactive melt‐blending of PLLA/PEG leads to the formation of a segmented PLLA‐b‐PEG block copolymer. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Relationship between the crystallization behavior of poly(ethylene glycol) and stereocomplex crystallization of poly(L‐lactic acid)/poly(D‐lactic acid)

Poly(l ‐lactic acid) (PLLA) is a good biomedical polymer material with wide applications. The addition of poly(ethylene glycol) (PEG) as a plasticizer and the formation of stereocomplex crystals (SCs) have been proved to be effective methods for improving the crystallization of PLLA, which will promote its heat resistance. In this work, the crystallization behavior of PEG and PLLA/poly(d ‐lactic acid) (PDLA) in PLLA/PDLA/PEG and PEG‐b‐PLLA/PEG‐b‐PDLA blends has been investigated using differential scanning calorimetry, polarized optical microscopy and X‐ray diffraction. Both SCs and homocrystals (HCs) were observed in blends with asymmetric mass ratio of PLLA/PDLA, while exclusively SCs were observed in blends with approximately equal mass ratio of PLLA/PDLA. The crystallization of PEG was only observed for the symmetric blends of PLLA_39k/PDLA_35k/PEG_2k, PLLA_39k/PDLA_35k/PEG_5k, PLLA_69k/PDLA_96k/PEG_5k and PEG‐b‐PLLA_31k/PEG‐b‐PDLA_27k, where the mass ratio of PLLA/PDLA was approximately 1/1. The results demonstrated that the formation of exclusively SCs would facilitate the crystallization of PEG, while the existence of both HCs and SCs could restrict the crystallization of PEG. The crystallization of PEG is related to the crystallinity of PLLA and PDLA, which will be promoted by the formation of SCs. © 2017 Society of Chemical Industry     

Combustion properties and transference behavior of ultrafine microencapsulated ammonium polyphosphate in ramie fabric‐reinforced poly(L‐lactic acid) biocomposites

Flame‐retardant biocomposites have attracted much attention in past decades. They can provide many advantages, such as total biodegradability and their abundant renewable sources. In the work reported, biocomposites based on poly(L ‐lactic acid) (PLLA), ramie fabric (FAB) and microencapsulated ammonium polyphosphate (MCAPP) were synthesized via hot press molding using the powder‐stacking procedure. The effects of transference behavior of the flame retardant on sustaining flame retardancy of the biocomposites were investigated. Thermogravimetric analysis shows that the improved flame retardancy is due to an increased char residue at high temperature. Field emission scanning electron microscopy images and wide‐angle X‐ray diffraction data were used to investigate the hydrolysis reaction and transference behavior of ammonium polyphosphate in the biocomposites. UL‐94 testing and limiting oxygen index measurements show that the PLLA/FAB/MCAPP biocomposites retain their flame retardancy even after 21 days in UV‐irradiation hydrothermal aging tests. The good sustained flame retardancy of the PLLA/FAB/MCAPP biocomposites is attributed to the docking interactions and good distribution of MCAPP in the biocomposites. Copyright © 2010 Society of Chemical Industry     

Synthesis,physical properties,and crystallization of optically active poly(L‐phenyllactic acid) and poly(L‐phenyllactic acid‐co‐L‐lactic acid)

Optically active poly(L ‐phenyllactic acid) (Ph‐PLLA), poly(L ‐lactic acid) (PLLA), and poly(L ‐phenyllactic acid‐co‐L ‐lactic acid) with weight‐average molecular weight exceeding 6 × 10³ g mol^?1 were successfully synthesized by acid catalyzed direct polycondensation of L ‐phenyllactic acid and/or L ‐lactic acid in the presence of 2.5–10 wt % of p‐toluenesulfonic acid. Their physical properties and crystallization behavior were investigated by differential scanning calorimetry, thermogravimetry, and polarimetry. The absolute value of specific optical rotation ([α]) for Ph‐PLLA (?38 deg dm^?1 g^?1 cm³) was much lower than that of [α] for PLLA (?150 deg dm^?1 g^?1 cm³), suggesting that the helical nature was reduced by incorporation of bulky phenyl group. PLLA was crystallizable during solvent evaporation, heating from room temperature, and cooling from the melt. Incorporation of a very low content of bulky phenyllactyl units even at 4 mol % suppressed the crystallization of L ‐lactyl unit sequences during heating and cooling, though the copolymers were crystallizable for L ‐phenylactyl units up to 6 mol % during solvent evaporation. The activation energy of thermal degradation (ΔE_td) for Ph‐PLLA (200 kJ mol^?1) was higher than that for PLLA (158 kJ mol^?1). The ΔE_td for the copolymers increased with an increase in L ‐phenyllactyl unit content. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Morphology,rheological, crystallization behavior,and mechanical properties of poly(L‐lactide)/ethylene‐co‐vinyl acetate blends with different VA contents

Poly(L‐lactide)/ethylene‐co‐vinyl acetate (PLLA/EVA) blends with different contents of Vinyl Acetate (VA) in EVA phase were prepared through melt blending process. Although the composition of the blends was invariant (70/30), different phase morphologies were observed, namely, sea‐island morphologies for the blends with VA contents of 7.5, 18, and 28 wt %, whereas approximate co‐continuous morphology for the blend with VA content of 40 wt % was observed. The interfacial interaction between PLLA and EVA was visualized by Fourier transform infrared and rheological measurements. The nonisothermal and isothermal crystallization behaviors of the blends were investigated by wide angle X‐ray diffraction, Differential scanning calorimetry, and polarization optical microscope. Post‐thermal treatment was applied to improve the crystalline structure of PLLA. The results show that all the samples are mainly in amorphous state during the injection molding process. However, annealing promotes the second crystallization of PLLA matrix, leading to the improvement of the crystalline structure. Especially, the effect of annealing on crystalline structure of PLLA matrix is greatly dependent on the VA content of EVA. As expected, addition of EVA results in the improvement of the ductility and fracture toughness of the blends. The decreased tensile modulus and tensile strength can be enhanced through annealing process. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Mesomorphic phase formation of plasticized poly(l‐lactic acid)

The effects of the crystallization temperature, T_c, on the crystal structure as well as its thermal behavior of plasticized poly(l ‐lactic acid) were investigated by means of wide‐angle X‐ray diffraction (WAXD), Fourier‐transform infrared spectroscopy (FTIR), and differential scanning calorimetry (DSC). PLLA blended with succinic acid‐bis[2‐[2‐(2‐methoxyethoxy)ethoxy]ethyl] ester (SAE) showed clear difference in T_c dependence of crystalline form compared to PLLA homopolymer. PLLA with 26 wt % SAE crystallized into orthorhombic α form for T_c above 80°C, while a peculiar disordered structure (mesophase) was obtained for T_c at 40°C. A detailed FTIR analysis of the mesophase of PLLA, focusing on the intra‐ and inter‐chain interaction in the structure, indicated that mesophase had a large degree of disorder in 10/3 helical conformation as well as its packing manner of disordered 10/3 helical chain. Upon heating, mesophase showed a steep exothermic peak at 80°C in DSC thermogram, indicating the phase transformation from mesophase to a form crystal. FTIR results showed that the degree of interchain interaction of C=O in PLLA started to decrease above 60°C, followed by steep increase at 80°C due to the recrystallization into a form. Melt‐recrystallization process in mesophase‐α transformation was clarified. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39762.     

Crystallization behavior and mechanical properties of bio‐based green composites based on poly(L‐lactide) and kenaf fiber

Bio‐based polymer composite was successfully fabricated from plant‐derived kenaf fiber (KF) and renewable resource‐based biodegradable polyester, poly(L ‐lactide) (PLLA), by melt‐mixing technique. The effect of the KF weight contents (0, 10, 20, and 30 wt %) on crystallization behavior, composite morphology, mechanical, and dynamic mechanical properties of PLLA/KF composites were investigated. It was found that the incorporation of KF significantly improves the crystallization rate and tensile and storage modulus. The crystallization of PLLA can be completed during the cooling process from the melt at 5°C/min with the addition of 10 wt % KF. It was also observed that the nucleation density increases dramatically and the spherulite size drops greatly in the isothermal crystallization with the presence of KF. In addition, with the incorporation of 30 wt % KF, the half times of isothermal crystallization at 120°C and 140°C were reduced to 46.5% and 28.1% of the pure PLLA, respectively. Moreover, the tensile and storage modulus of the composite are improved by 30% and 28%, respectively, by the reinforcement with 30% KF. Scanning electron microscopy observation also showed that the crystallization rate and mechanical properties could be further improved by optimizing the interfacial interaction and compatibility between the KF and PLLA matrix. Overall, it was concluded that the KF could be the potential and promising filler for PLLA to produce biodegradable composite materials, owing to its good ability to improve the mechanical properties as well as to accelerate the crystallization of PLLA. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Effect of a small amount of poly(3‐hydroxybutyrate) on the crystallization behavior of poly(l‐lactic acid) in their immiscible and miscible blends during physical aging

The miscibility and effect of physical aging on the crystallization behavior of poly(l ‐lactic acid) (PLLA)/poly(3‐hydroxybutyrate) (PHB) blends with a small amount of PHB (≤10 wt%) have been investigated using differential scanning calorimetry and Fourier transform infrared spectroscopy. It is found that the miscibility of PLLA/PHB blends with a very small percentage of PHB can be modulated by varying the molecular weight of the PHB. That is, a PLLA/PHB blend with low‐molecular‐weight PHB is miscible, whereas that with high‐molecular‐weight PHB is immiscible. It is found that physical aging at temperatures far below the glass transition temperature can promote the cold crystallization kinetics of PLLA in PLLA/PHB blends with high‐molecular‐weight PHB rather than in those with low‐molecular‐weight PHB. These findings suggest that the effect of physical aging on the crystallization behavior of the main component in a crystalline/crystalline blend with a small percentage of the second component is strongly dependent on the miscibility of the blend system. Enhanced chain mobility of PLLA in the interface region of PLLA matrix and PHB micro‐domains is proposed to explain the physical aging‐enhanced crystallization rate in immiscible PLLA/PHB blends with high‐molecular‐weight PHB. © 2013 Society of Chemical Industry     

Crystallization behavior and crystallite morphology control of poly(L‐lactic acid) through N,N′‐bis(benzoyl)sebacic acid dihydrazide

Adding a nucleating agent is one of the best ways to accelerate the crystallization rate of poly(L ‐lactic acid) (PLLA) so as to obtain a high degree of crystallinity during the process, which will improve the heat distortion temperature of final products. In the work reported, N, N′‐bis(benzoyl)sebacic acid dihydrazide (BSAD) was synthesized and used as a nucleating agent for PLLA. Isothermal and non‐isothermal crystallization behaviors were investigated using differential scanning calorimetry (DSC). The addition of BSAD successfully enhances the crystallization rate of PLLA. A unique phase separation behavior of PLLA/BSAD blends is found from DSC as well as from polarized optical microscopy, which explains the difference of optimal BSAD concentration between isothermal and non‐isothermal crystallization. This is the first recording of a phase separation peak in PLLA/nucleating agent blends using DSC. In thermogravimetric analysis, the enhanced thermal stability indicates that there are strong hydrogen bonds between BSAD and PLLA matrix. BSAD can dissolve in PLLA melt below its melting point through intermolecular hydrogen bonding with PLLA and self‐assemble upon cooling, leading to the surface being capable of nucleating PLLA. Different phase separation temperatures can be used to control the morphology of BSAD, which finally determines the crystallite morphology of PLLA. © 2012 Society of Chemical Industry