Radiation synthesis of interpenetrating polymer networks based on N‐vinyl pyrrolidone – acrylic acid copolymer and gelatin. I. Swelling,morphology, and thermal characterization for biomedical applications

Interpenetrating polymer networks (IPNs) based on N‐vinyl pyrrolidone (NVP) : gelatin (Ge), and a copolymer of NVP – acrylic acid (AA) : gelatin (Ge) were prepared using N‐N′methylenebisacrylamide (BIS) (0.5, 1% w/w) and glutaraldehyde (GLU) (0.5% v/v) as crosslinkers, respectively, by gamma irradiation technique. GLU was incorporated after irradiation to crosslink the gelatin chains, whereas BIS was placed in the respective solutions before irradiation. Several samples were prepared by varying the composition of gelatin to NVP or by changing the ratio of NVP : AA in preparing IPNs. The swelling behavior of the hydrogels was investigated as a function of variable doses, crosslinker (BIS) concentration, copolymer composition (NVP : AA ratio) or Ge : NVP ratio and pH of the immersion medium (3, 7.4, and 11). As expected, the swelling ratio increased with increasing acrylic acid content and decreased with increasing BIS content. No definite trend in the swelling behavior was observed as a function of dose. The interpenetration of the polymeric chains was established by morphological and thermal characterization. Scanning electron microscopy of IPNs showed a hybrid of coral and honeycomb structures as compared with the crosslinked polymers based on Ge and NVP (G_x and PVP_x). © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1456–1463, 2007     

温度及pH敏感生物水凝胶的研究

运用互穿网络技术,合成了具有温敏性的聚(N 异丙基丙烯酰胺)(PNIPAm)和生物大分子明胶(gelatin)的互穿网络聚合物(PNIPAm/Gelatinsemi IPN和PNIPAm/GelatinIPN)水凝胶,该水凝胶的最低临界溶液温度(LCST)与PNIPAm水凝胶的LCST基本相同,均为33℃左右,但在LCST以下的平衡溶胀率减小、相变区域略微变宽。在此基础上,通过N 异丙基丙烯酰胺(NIPAm)与丙烯酸(AAc)交联共聚,改变了水凝胶的LCST,在pH=4 0的缓冲溶液中,各水凝胶的溶胀行为基本一致,与AAc含量无关,LCST都为28℃左右;在pH>4 0的缓冲溶液中,LCST随AAc组分含量的增加而增加,但温敏性减小。同时,AAc的加入,使水凝胶具有pH敏感性,敏感点为pH=4 5左右。还考察了该水凝胶降解的特点:戊二醛(GA)交联后的明胶网络,保留了明胶的生物降解性,但互穿网络水凝胶在实验条件下几乎未被胃蛋白酶和胰蛋白酶降解,在pH=9 6的碱性条件下,水凝胶可发生化学降解。     

Swelling behavior of semi‐interpenetrating polymer network hydrogels composed of poly(vinyl alcohol) and poly(acrylamide‐co‐sodium methacrylate)

Interpenetrating polymer network (IPN) hydrogels based on poly(vinyl alcohol) (PVA) and poly(acrylamide‐co‐sodium methacrylate) poly(AAm‐co‐SMA) were prepared by the semi IPN method. These IPN hydrogels were prepared by polymerizing aqueous solution of acrylamide and sodium methacrylate, using ammonium persulphate/N,N,N¹,N¹‐tetramethylethylenediamine (APS/TMEDA) initiating system and N,N¹‐methylene‐bisacrylamide (MBA) as a crosslinker in the presence of a host polymer, poly(vinyl alcohol). The influence of reaction conditions, such as the concentration of PVA, sodium methacrylate, crosslinker, initiator, and reaction temperature, on the swelling behavior of these IPNs was investigated in detail. The results showed that the IPN hydrogels exhibited different swelling behavior as the reaction conditions varied. To verify the structural difference in the IPN hydrogels, scanning electron microscopy (SEM) was used to identify the morphological changes in the IPN as the concentration of crosslinker varied. In addition to MBA, two other crosslinkers were also employed in the preparation of IPNs to illustrate the difference in their swelling phenomena. The swelling kinetics, equilibrium water content, and water transport mechanism of all the IPN hydrogels were investigated. IPN hydrogels being ionic in nature, the swelling behavior was significantly affected by environmental conditions, such as temperature, ionic strength, and pH of the swelling medium. Further, their swelling behavior was also examined in different physiological bio‐fluids. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 302–314, 2005     

Synthesis and characteristics of the interpenetrating polymer network hydrogel composed of chitosan and polyallylamine

A temperature‐ and pH‐dependent hydrogel was studied with interpenetrating polymer network (IPN) hydrogels constructed with water‐insoluble chitosan and polyallylamine. Various IPNs were prepared from different weight ratios of chitosan–polyallylamine. Crosslinked‐IPN hydrogels exhibited relatively high equilibrium water content (EWC) in the range 80–83%. The EWC of IPN hydrogels depended on pH and the amount of complex, which is the content of chitosan and polyallylamine. The differential scanning calorimeter (DSC) thermogram of fully swollen IPN hydrogels appeared between 3 to 4 °C. The IPNs exhibited two glass‐transition temperatures (T_gs), indicating the presence of phase separation in the IPNs as exhibited by dielectric analysis (DEA). © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 498–503, 2002     

Water and temperature response of semi‐IPN hydrogels composed of chitosan and polyacrylonitrile

Temperature‐responsive semi‐interpenetrating polymer networks (semi‐IPNs) constructed with chitosan and polyacrylonitrile (PAN) were crosslinked with glutaraldehyde. The semi‐IPN determined the sorption behavior of water at several temperatures and at a relative humidity (RH) of 95% using a dynamic vapor sorption (DVS) system. Water diffusion coefficients of semi‐IPNs were calculated according to the Fickian Law at several temperatures and exhibited a relatively water uptake, 0.1–0.4 at room temperature. The water uptake of hydrogels depended on temperature. The apparent activation energy was dependent of the composition of the semi‐IPN with value of 32.8–34.8 kJmol^?1. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 12: 2721–2724, 2003     

Synthesis and characteristics of semi‐interpenetrating polymer network hydrogels based on chitosan and poly(hydroxy ethyl methacrylate)

Semi‐interpenetrating polymer networks (semi‐IPNs), composed of chitosan and poly(hydroxy ethyl methacrylate) hydrogels, were prepared and the effects of various pH, temperatures, and an electric‐field on the swollen hydrogels were investigated. The swelling kinetics increased rapidly, reaching equilibrium within 60 min. Semi‐IPN hydrogels exhibited relatively high swelling ratios, 150～350%. The swelling ratio increased when the pH of the buffer was below pH 7 as a result of the dissociation of ionic bonds. Semi‐IPN hydrogels showed electroresponsiveness by shrinking when an electric field was applied. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 86–92, 2005     

Interpenetrating polymeric network hydrogels for potential gastrointestinal drug release

New interpenetrating polymeric network (IPN) hydrogels based on chitosan (C), poly(N‐vinyl pyrrolidone) (PVP) and poly(acrylic acid) (PAAc), crosslinked with glutaraldehyde (G) and N,N‘‐methylenebisacrylamide (MBA), were prepared and investigated for potential gastrointestinal drug delivery vehicles utilizing a model drug, amoxicillin. IPN hydrogels were synthesized by simultaneous polymerization/crosslinking of acrylic acid monomer in the presence of another polymer (C) and crosslinker (G, MBA). Three different concentrations of glutaraldehyde were used (0.5, 1.0 and 2.0 w/w) to control the overall porosity of the hydrogels, named C‐P‐AAc/0.5, C‐P‐AAc/1.0 and C‐P‐AAc/2.0, respectively. Spectroscopic and thermal analyses such as Fourier transform infrared spectroscopy, thermogravimetric analysis and thermomechanical analysis were performed for IPN characterization. Equilibrium swelling studies were conducted for pH and temperature response behavior. Swelling studies were also carried out in simulated gastric fluid of pH = 1.1 and simulated intestinal fluid of pH = 7.4 to investigate possible site‐specific drug delivery. It was found that the release behavior of the drug from these IPN hydrogels was dependent on the pH of the medium and the proportion of crosslinker in the IPN. It was observed that amoxicillin release at pH = 7.4 was higher than at pH = 1.1. The analysis of the drug release showed that amoxicillin was released from these hydrogels through a non‐Fickian diffusion mechanism. Copyright © 2007 Society of Chemical Industry     

Swelling and diffusion characteristics of novel semi‐interpenetrating network hydrogels composed of poly[(acrylamide)‐ co‐(sodium acrylate)] and poly[(vinylsulfonic acid), sodium salt]

A series of novel semi‐interpenetrating polymer networks (IPNs) composed of poly[(acrylamide)‐co‐(sodium acrylate)] with varying amounts (5, 10, and 15 wt%) of poly[(vinylsulfonic acid), sodium salt] was synthesized. The semi‐IPN hydrogels were characterized by infrared spectroscopy. The swelling behavior of these IPNs was studied in distilled water/physiological solutions/buffer solutions/salt solutions. As the amount of poly[(vinylsulfonic acid), sodium salt] increased in the network, the swelling capacity of the semi‐IPNs increased considerably. The swelling and diffusion characteristics such as water penetration velocity (v), diffusion exponent (n), and diffusion coefficient (D) were calculated in distilled water, as well as in other physiological solutions. The highest swelling capacity was noted in urea and glucose solutions. The semi‐IPN hydrogels followed non‐Fickian diffusion behavior in water and physiological fluids, whereas Fickian behavior was observed in buffer solutions. The stimuli‐responsive characteristics towards physiological fluids, salt concentration, and temperature of these semi‐IPN hydrogels were also investigated. The swelling behavior of the semi‐IPNs decreased markedly with an increase of the concentration of the salt solutions. Copyright © 2006 Society of Chemical Industry     

Synthesis of full and semi Interpenetrating hydrogel from polyvinyl alcohol and poly (acrylic acid‐co‐hydroxyethylmethacrylate) copolymer: Study of swelling behavior,network parameters,and dye uptake properties

Semi and full interpenetrating network (IPN) hydrogels were synthesized by allowing free radical copolymerization of acrylic acid (AA) and hydroxyethyl methacrylate (HEMA) in the matrix of polyvinyl alcohol (PVOH). Accordingly, four different semi IPN hydrogels were prepared with PVOH: copolymer mass ratio of 1 : 1, 1 : 0.75, 1 : 0.5, and 1 : 0.25. These hydrogels were designated as SEMIIPN1, SEMIIPN2, SEMIIPN3, and SEMIIPN4, respectively. In all of these SEMIIPN, after polymerization PVOH was crosslinked with 2 mass % glutaraldehyde to form the semi IPN structure. In a similar way, sequential full IPN were prepared from PVOH and copolymer of AA and HEMA (designated as PAAHEMA) with same composition except in this case apart from crosslinking of PVOH by 2 mass % glutaraldehyde the PAAHEMA copolymer was further crosslinked with N,N′‐methylenebisacrylamide (NMBA) to produce four full IPN hydrogels designated as FULLIPN1, FULLIPN2, FULLIPN3, and FULLIPN4. All of these semi and full IPN type hydrogels were characterized by carboxylic %, FTIR, UV, DTA‐TGA, XRD, SEM, and mechanical properties. The network parameters, swelling and diffusion characteristics of these hydrogels were also studied. The performance of these semi and full IPNs were compared in terms of their relative abilities for removing varied concentration of rhodamine B (RB) and methyl Violet (MV) dyes from water. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis and characterization of an interpenetrating polymer network composed of poly(methacrylic acid) and poly(vinyl alcohol)

Temperature and pH‐responsive interpenetrating polymer network (IPN) hydrogels, constructed with poly(methacrylic acid) (PMAA) and poly(vinyl alcohol) (PVA), by a sequential IPN method, were studied. The characterization of IPN hydrogels was investigated by Fourier‐transform infrared spectroscopy, differential scanning calorimetry (DSC) and swelling under various conditions. The IPN hydrogels exhibited relatively high swelling ratios, in the range 230–380 %, at 25 °C. The swelling ratios of the PMAA/PVA IPN hydrogels were pH and temperature dependent. DSC was used for the quantitative determination of the amounts of freezing and non‐freezing water. The amount of free water increased with increasing PMAA content in the IPN hydrogels. Copyright © 2004 Society of Chemical Industry     

Interpenetrating polymer networks based on poly(acrylic acid) and gelatin. I: Swelling and thermal behavior

This article describes the synthesis of full and semi-interpenetrating polymer networks (IPNs) based on poly(acrylic acid) and gelatin as polymers 1 and 2, which were crosslinked sequentially using N,N′-methylene bisacrylamide (B_Am) and glutaraldehyde, respectively. Various samples were prepared by taking varying amounts of acrylic acid and gelatin in the initial feed. Sequential IPNs were prepared by first polymerizing and crosslinking acrylic acid in the presence of gelatin using redox initiators (ammonium persulphate and sodium metabisulphite) and B_Am as a crosslinking agent. Gelatin present in the firm gels was then crosslinked using 4% glutaraldehyde. Characterization of these gels was done by measuring their swelling behavior as a function of pH, temperature, and time. Percent swelling increased with increasing amounts of acrylic acid. The swelling ratio was also determined in the pH range of 1 to 12. Acid/alkali or buffers were used for maintaining pH. A significant increase in the percent swelling was observed when pH of distilled water was above 10. On the other hand, in the case of buffer, the swelling ratio increased with increasing the pH, and a maxima was observed at pH 8.4. A further increase in pH resulted in a decrease in the swelling ratio. Thermal and morphological characterization was done using thermogravimetric analyzer and scanning electron microscopy, respectively. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 217–227, 2001     

Thermal characteristics of poly(vinyl alcohol) and poly(vinylpyrrolidone) IPNs

Interpenetrating polymer network (IPN) hydrogels based on poly(vinyl alcohol) (PVA) and 1‐vinyl‐2‐pyrrolidone (VP) were prepared by radical polymerization using 2,2‐dimethyl‐2‐phenylacetophenone (DMPAP) and methylene bisacrylicamide (MBAAm) as initiator and crosslinker, respectively. The thermal characterization of the IPNs was investigated by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and dielectric analysis (DEA). Depressions of the melting temperatures of PVA segments in IPNs were observed with increasing VP content via the DSC. The DEA was employed to ascertain the glass transition temperature (T_g) of IPNs. From the result of DEA, IPNs exhibited two T_gs indicating the presence of phase separation in the IPN. The thermal decomposition of IPNs was investigated using TGA and appeared at near 270°C. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1844–1847, 2002     

A fast pH-responsive IPN hydrogel: Synthesis and controlled drug delivery

A series of fast pH-responsive silk sericin (SS)/poly(methacrylic acid) (PMAA) IPN hydrogels were prepared by the simultaneous-IPN method. The structure of the resultant IPN hydrogels was characterized by fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The swelling experimental of the IPNs revealed that the hydrogels displayed definite pH sensitivity under physiological conditions, as well as sharp changes in the mesh size of their network as a function of the composition and pH of the swelling media. Bovine serum albumin (BSA) was chosen as a model protein to evaluate the permeation profile through the IPNs in both the simulated gastric and intestinal pH conditions. In all cases, it was found that the release rate of BSA was lower in acidic media (pH 2.6) and higher in basic media (pH 7.4).     

Synthesis and characterization of pH‐ and temperature‐sensitive silk sericin/poly(N‐isopropylacrylamide) interpenetrating polymer networks

Interpenetrating polymer networks (IPNs) composed of silk sericin (SS) and poly(N‐isopropylacrylamide) (PNIPAAm) were prepared simultaneously. The properties of the resultant IPN hydrogels were characterized by differential scanning calorimetry and SEM as well as their swelling behavior at various temperatures and pH values. The single glass transition temperature (T_g) presented in the IPN thermograms indicated that SS and PNIPAAm form a miscible pair. The swollen morphology of the IPNs observed by SEM demonstrated that water channels (pores present in SEM micrographs) were distributed homogeneously through out the network membranes. The swelling ratio of the IPNs depended significantly on the composition, temperature and pH of the buffer solutions. The dynamic transport of water into the IPN membrane was analyzed based on the Fickian equation. Copyright © 2006 Society of Chemical Industry     

Electrical behavior of chitosan and poly(hydroxyethyl methacrylate) hydrogel in the contact system

Semi‐interpenetrating polymer networks (semi‐IPNs), as polymer hydrogels composed of chitosan and poly(hydroxyethyl methacrylate) (PHEMA), exhibiting electrical‐sensitive behavior, were prepared. The swelling behavior of the chitosan/PHEMA hydrogels was studied by immersing the gels in various concentrations of aqueous NaCl solution. The electrical responses of the semi‐IPN hydrogel, in applied electric fields, were also investigated. When the semi‐IPN hydrogels were swollen, where one electrode was placed in contact with the gel and the other fixed 30 mm apart from one, they exhibited bending behavior on the application of an electric field on a contact system. The electroresponsive behavior of the present semi‐IPN was also affected by the electrolyte concentration of the external solution. The semi‐IPN also showed various degrees of increased bending behavior depending on the electric stimulus. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 915–919, 2004     

Characterization of hydrogels based on chitosan and copolymer of poly(dimethylsiloxane) and poly(vinyl alcohol)

Copolymers composed of poly(vinyl alcohol) (PVA) and poly(dimethylsiloxane) (PDMS) were crosslinked with chitosan to prepare semi‐interpenetrating polymer network (IPN) hydrogels by an ultraviolet (UV) irradiation method for application as potential biomedical materials. PVA/PDMS copolymer and chitosan was cast to prepare hydrogel films, followed by a subsequent crosslinking with 2,2‐dimethoxy‐2‐phenylacetophenone as a nontoxic photoinitiator by UV irradiation. Various semi‐interpenetrating polymer networks (semi‐IPNs) were prepared from different weight ratios of chitosan and the copolymer of PVA/PDMS. Photocrosslinked hydrogels exhibited an equilibrium water content (EWC) in the range of 65–95%. Swelling behaviors of these hydrogels were studied by immersion of the gels in various buffer solutions. Particularly, the PCN13 as the highest chitosan weight ratio in semi‐IPN hydrogels showed the highest EWC in time‐dependent and pH‐dependent swelling. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2591–2596, 2002     

Preparation of hydrogels composed of poly(vinyl alcohol) and polyethyleneimine and their electrical response

Semi‐ and full‐interpenetrating polymer network (IPN) hydrogels composed of poly(vinyl alcohol) and polyethyleneimine (PEI) were prepared to investigate the bending behavior under the electric response. To find out the characteristics of the hydrogel in the medium, swelling ratio, and rate and water state of the hydrogels were measured. The swelling ratio of the semi‐IPN hydrogels increased with PEI content in the matrix, whereas that of full‐IPN hydrogels dramatically decrease with increase of PEI contents in the hydrogels. In the water state of hydrogel, the bound water and free water of semi‐IPN hydrogels increased with PEI weight ratio. The full‐IPN hydrogels show the lower free water content in comparison with the semi‐IPN hydrogel. The IPN hydrogels exhibited bending angle change in response to external stimulus such as voltage, the bending angle increased with PEI concentration. In addition, the repeated bending behaviors according to the magnitude of the applied electric field revealed that the bending angle is reversible without collapse of formation of hydrogel in all samples. Thus, the hydrogels will be useful as novel modulation systems in the field of artificial organ and matrix for drug delivery. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Studies and characterization of RESOL/VAc–EHA/HMMM IPN systems in aqueous medium

Resol was solution‐blended with vinyl acetate‐2‐ethylhexyl acrylate (VAc–EHA) resin in an aqueous medium, in varying weight fractions, with hexamethoxymethylmelamine (HMMM) as a crosslinker and the data were compared with a control. The present work was aimed to obtain an optimum combination of high‐temperature resistance by synthesis of an interpenetrating network (IPN) of the resins. The control gave a semi‐IPN system, in which the resol crosslinked, while the acrylic did not, whereas the blend, where HMMM was the crosslinker, gave a full‐IPN system. FTIR spectra of the blends of resol/VAc–EHA/HMMM indicated the formation of new stretching, which was generated due to crosslinking reactions among VAc–EHA and the crosslinker HMMM. TGA showed that, with an increase in the VAc–EHA percent in semi‐IPNs, the decomposition temperature decreased gradually, whereas in case of full‐IPNs, the decomposition temperature increased with increase in the VAc–EHA percent. However, the full‐IPNs had a higher decomposition temperature than that of the semi‐IPNs, at the same resol/(VAc–EHA) ratio. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3581–3588, 2002     

Preparation and characterization of tetracycline‐loaded interpenetrating polymer networks of carboxymethyl cellulose and poly(acrylic acid): water sorption and drug release study

Tetracycline (TC)‐loaded ionic interpenetrating polymer networks (IPNs) of carboxymethyl cellulose (CMC) and crosslinked poly(acrylic acid) (PAA) were prepared and characterized by infrared spectral analysis, differential scanning calorimetry and scanning electron microscopy techniques. The prepared IPNs were evaluated for in vitro blood compatibility by clot formation and hemolysis methods and their water imbibitions capacity was determined. Fractional release dynamics of tetracycline was also investigated from loaded IPNs of CMC and PAA. The entrapped drug was examined for antibacterial activity and structural integrity and effects of various parameters such as percentage loading of the drug, chemical composition of the carrier IPN, pH and temperature of the release medium were investigated on the release profiles of TC. The drug was also released in different simulated biological fluids. Copyright © 2005 Society of Chemical Industry     

Insolubilization of sodium chondroitin sulfate by forming a semi‐interpenetrating polymer network with acrylic acid: A potential carrier for colon‐specific drug delivery

To reduce the highly hydrophilic property of chondroitin sulfate (ChS), a semi‐interpenetrating polymer network (semi‐IPN) of chondroitin sulfate/polyacrylic acid (PAA) was prepared as a drug carrier by crosslinking acrylic acid with diethyleneglycol diacrylate. The swelling properties of the semi‐IPNs with different concentrations of crosslinking agent were correlated. The moisture sorption profiles were evaluated using differential thermal analysis. Ketoprofen was used as a drug probe to evaluate the performance of the drug released from the semi‐IPN matrices. The prepared semi‐IPNs demonstrated significant swelling reduction properties with both gastric and intestinal fluids compared with those of both the pure ChS and the ChSAA blend without the crosslinking agent. The amount of accumulated drug released from the semi‐IPNs was less than 30 wt % at pH 1.2 and up to 80 wt % at pH 7.4. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 114–122, 2002