Reaction kinetics of graft copolymerization and thermochemical studies of the degradation of poly(vinyl alcohol) graft copolymer

Poly(vinyl alcohol) (PVA) is a water‐soluble and biomedical polymer. 2‐Acrylamido‐2‐methyl‐1‐propanesulfonic acid was grafted onto PVA using ammonium persulfate as radical initiator. The influences of synthesis conditions such as temperature, concentrations of initiator, PVA and monomer were investigated. Both the initial rate of grafting and the final percentage of grafting were increased by an increase in reaction temperature. The reaction kinetics were studied to determine the rate constants of the first‐order reactions. An activation energy of 16.3 kJ mol^?1 was found for the grafting reaction. The graft copolymers were characterized by IR and intrinsic viscosity measurements. A proposed mechanism of the grafting reaction is discussed. Kinetics of the thermal degradation were studied using a thermogravimetric method and the order of thermal stabilities are given. The apparent activation thermodynamic parameters, E_a, ΔH*, ΔS* and ΔG* were determined and correlated to the thermal stabilities of the homo‐ and grafted polymers. © 2001 Society of Chemical Industry     

Synthesis of poly(vinyl propionate) from poly(vinyl alcohol) in nonaqueous medium using ethyl nitrate dimethyl sulfoxide as a catalyst

Poly(vinyl alcohol) (PVA) can be dissolved in a nonaqueous medium in the presence of catalytic concentration of ethyl nitrate dimethyl sulfoxide, C₂H₅ONO₂·DMSO. From the PVA solution, poly(vinyl propionate), PVPR was prepared by the homogeneous esterification of PVA with propionic acid. The ester thus formed contained some unconverted hydroxyl group. The formation of the ester was confirmed by the IR and ¹H‐NMR spectra. The molecular weight of the ester was determined by GPC and intrinsic viscosity (η) was determined by viscometric method. Glass transition temperature, T_g, was obtained from differential scanning calorimetric (DSC) analysis. Thermal stabilities of the ester were checked by thermogravimetric analysis (TGA) and differential thermogravimetric (DTG) analysis. The efficiency of the ester as a flow improver of crude oil was also examined. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5675–5679, 2006     

Thermal characteristics of poly(vinyl alcohol) and poly(vinylpyrrolidone) IPNs

Interpenetrating polymer network (IPN) hydrogels based on poly(vinyl alcohol) (PVA) and 1‐vinyl‐2‐pyrrolidone (VP) were prepared by radical polymerization using 2,2‐dimethyl‐2‐phenylacetophenone (DMPAP) and methylene bisacrylicamide (MBAAm) as initiator and crosslinker, respectively. The thermal characterization of the IPNs was investigated by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and dielectric analysis (DEA). Depressions of the melting temperatures of PVA segments in IPNs were observed with increasing VP content via the DSC. The DEA was employed to ascertain the glass transition temperature (T_g) of IPNs. From the result of DEA, IPNs exhibited two T_gs indicating the presence of phase separation in the IPN. The thermal decomposition of IPNs was investigated using TGA and appeared at near 270°C. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1844–1847, 2002     

Preparation of poly(vinyl butyral) with high acetalization rate

Poly(vinyl alcohol) (PVA) can be dissolved in a nonaqueous medium in the presence of catalytic concentration of ethyl nitrate dimethyl sulfoxide, C₂H₅ONO₂ · DMSO (EN · DMSO). From the PVA solution, poly(vinyl butyral) (PVBu) was prepared by acid‐catalyzed homogeneous acetalization of PVA with butyraldehyde. The formation of PVBu was confirmed by IR and ¹H‐NMR spectra. The degree of acetalization of PVBu was found to be 95 mol %, which was verified by ¹H‐NMR data and acetylation method. The molecular mass of the polymer was determined by GPC method. The glass transition temperature, T_g, was measured from differential scanning calorimetric (DSC) thermograms. Thermal stabilities were checked by thermogravimetric analysis (TGA) and differential thermogravimetry (DTG). The acetal decomposed in three stages. The corresponding initial decomposition temperatures were found to be 285, 390, and above 500°C. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 1182–1186, 2001     

Thermal and optical properties of gelatin/poly(vinyl alcohol) blends

Differential scanning calorimetry, thermogravimetric analysis, X‐ray diffraction, and ultraviolet–visible spectroscopy of gelatin and poly(vinyl alcohol) (PVA) homopolymers and their blended samples were studied. The data revealed that the gelatin and PVA polymers were compatible over the investigated range of compositions; this contributed to the formation of hydrogen‐bonding interaction between their polar groups. The associated enthalpy‐of‐melting transition and thermal stability of the blended samples increased with increasing PVA content. This indicated that the crystalline structure of PVA was not destroyed completely in the blends, which was consistent with the X‐ray diffraction pattern of the 50/50 (wt %/wt %) blended gelatin/PVA sample. The absorption edge and optical band gap for allowed direct transition were determined from ultraviolet–visible spectra. The induced changes in the band structure are elucidated. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Dehydrochlorination of poly(vinyl chloride) modified with titanium dioxide/poly(ethylene oxide) based paint photocatalysts

The dehydrochlorination of poly(vinyl chloride) (PVC) film samples modified with titanium dioxide (TiO₂)/poly(ethylene oxide) (PEO) based paint photocatalysts [the addition of methyl linoleate (ML) or methyl oleate (MO)] was performed. After 24 h of UV photoirradiation, the sample with TiO₂/PEO showed that there existed a structure with the longest polyene length, whereas that with TiO₂/PEO/ML contained the most polyene structures. The chloroform‐soluble fraction of the sample with TiO₂/PEO contained a poly(vinyl alcohol) (PVA) structure instead of a polyene one and showed a novel method of PVA production via PVC photodegradation. The molecular weight curve of the fraction shifted slightly to a lower molecular weight compared to that without the photocatalyst; this showed that slight polymer chain scission occurred. The ¹H‐NMR and ¹³C‐NMR spectra showed that the content of PVA units was about 20%, and the PVA sequence was blocky. The fraction of the sample with TiO₂/PEO/ML contained the highest methyl group content; this showed that the branch degree was highest as was the polyene content. These highest contents were due to the existence of the grafted ML. Pyrolysis gas chromatography/mass spectroscopy measurements suggested that there existed more polyene and graft units in the chloroform‐insoluble fractions of the samples with TiO₂/PEO, TiO₂/PEO/ML, and TiO₂/PEO/MO, respectively. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40760.     

Miscibility and phase structure of binary blends of poly(L‐lactide) and poly(vinyl alcohol)

Blend films of poly(L ‐lactide) (PLLA) and poly(vinyl alcohol) (PVA) were obtained by evaporation of hexafluoroisopropanol solutions of both components. The component interaction, crystallization behavior, and miscibility of these blends were studied by solid‐state NMR and other conventional methods, such as Fourier transform infrared (FTIR) spectra, differential scanning calorimetry (DSC), and wide‐angle X‐ray diffraction (WAXD). The existence of two series of isolated and constant glass‐transition temperatures (T_g's) independent of the blend composition indicates that PLLA and PVA are immiscible in the amorphous region. However, the DSC data still demonstrates that some degree of compatibility related to blend composition exists in both PLLA/atactic‐PVA (a‐PVA) and PLLA/syndiotactic‐PVA (s‐PVA) blend systems. Furthermore, the formation of interpolymer hydrogen bonding in the amorphous region, which is regarded as the driving force leading to some degree of component compatibility in these immiscible systems, is confirmed by FTIR and further analyzed by ¹³C solid‐state NMR analyses, especially for the blends with low PLLA contents. Although the crystallization kinetics of one component (especially PVA) were affected by another component, WAXD measurement shows that these blends still possess two isolated crystalline PLLA and PVA phases other than the so‐called cocrystalline phase. ¹³C solid‐state NMR analysis excludes the interpolymer hydrogen bonding in the crystalline region. The mechanical properties (tensile strength and elongation at break) of blend films are consistent with the immiscible but somewhat compatible nature of these blends. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 762–772, 2001     

Comparative study of poly(vinyl alcohol)‐based support materials for the immobilization of glucose oxidase

BACKGROUND: The performances of four types of glucose oxidase (GOD) immobilization materials based on poly(vinyl alcohol) (PVA) were compared. The matrices of interest were chemically‐linked PVA, freeze‐thawed PVA cryogel, tetramethoxysilane (TMOS) sol‐gel‐PVA hybrid material, and alumina sol‐gel‐PVA hybrid material. RESULTS: Overall, the membranes showed good sensitivity except for the chemically cross‐linked PVA. However, the main differences with the enzyme immobilization methods were enzyme leakage and values of K_m^app. CONCLUSION: Freeze‐thawed PVA‐GOD membranes and TMOS‐PVA, which showed satisfactory sensitivity and adequate value of K_m^app, were quite promising as support materials for immobilizing GOD. Copyright © 2007 Society of Chemical Industry     

Reversible photoreaction of C60-containing poly(vinyl alcohol)

Poly(vinyl alcohol) (PVA) was reacted with strong base NaH to convert its pendant hydroxy to oxy anions, followed with nucleophilic addition to buckminsterfullerene-C₆₀. The resulted PVA(C60−Na⁺)_n products were then converted to PVA(C₆₀H)_n by stirring with a strong acid cation exchanger of the H⁺ form. The reduced viscosities of PVA(C₆₀H)_n decreases with amount of C₆₀, and are between 0.38 and 0.66 dL/g compared to 1.97 dL/g of the original PVA. Repeated photocrosslinking under 300 nm light and photocleavage under 254 nm light of these C₆₀-containing PVAs were investigated in DMSO by tracing their UV absorption variations at 325 nm (maximum absorption of C₆₀H). It is confirmed that both PVA(C₆₀H)_n exhibit excellent reversibility at least under the observed three cycles. © 1998 John Wiley & Sons, Inc. J. Appl. Polym. Sci. 70: 605–611, 1998     

Development of a nonaqueous solvent system for poly(vinyl alcohol) and its characterization

Solubility of poly(vinyl alcohol) (PVA) in water prevents the preparation of various derivatives through homogeneous techniques as most of the derivatives thus formed are insoluble in aqueous medium. There are a number of solvents that can swell PVA under hot conditions but cannot dissolve PVA. In the present study, N,N‐dimethyl acetamide (DMAc) has been identified as solvent in which PVA can be dissolved in the presence of an equimolar amount of lithium chloride (LiCl). ¹H nuclear magnetic resonance (¹H‐NMR), ¹³C‐NMR, infrared (IR), and X‐ray diffraction (XRD) studies have been carried out to characterize the regenerated poly(vinyl alcohol) (RPVA). DMAc–LiCl is found to be a true solvent system for dissolution of PVA. An attempt has also been made to prepare poly(vinyl acetate) from this solution of PVA by a homogeneous technique. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 663–669, 1999     

Structure and properties of hydrophobic cationic poly(vinyl alcohol)

A new class of derivatives of poly(vinyl alcohol) (PVA) was prepared through hydrophobic cationic modification. The structure and composition of PVA grafted with glycidyl‐N‐alkyl‐N,N‐dimethyl‐ammonium chloride (DA) (PVA‐ graft ‐DA) was confirmed with Fourier transform infrared spectral analysis and ¹H NMR spectral analysis. The stress‐strain curves of PVA‐ graft ‐DA samples all exhibited an elastic deformation stress plateau, and strain hardening behavior can be observed, indicating the transition of PVA from brittle fracture to ductile fracture. Compared with virgin PVA, the relaxation peak (T_g) of PVA‐ graft ‐DA shifted to a lower temperature. With increasing alkyl chain length and grafting ratio of DA, T_g decreased, and PVA‐ graft ‐DA exhibited a gradually decreasing storage modulus over the whole temperature range of testing due to the relatively weak intermolecular hydrogen bonding and increasing flexibility of molecular chains by introduction of long alkyl chains. PVA crystallites were not affected by grafting with DA, while the crystallization temperature and crystallinity of PVA were improved and the grain size decreased. On grafting with DA, the fracture surface of PVA changed from a smooth surface to regularly distanced striations, displaying much obvious character of tough fracture, indicating that appropriate intermolecular association of the hydrophobic groups facilitated the formation of physical entanglement of molecular chains to strengthen and toughen the PVA matrix. PVA‐ graft ‐DA showed a significant decreasing surface tension with polymer concentration, while the surface tension of PVA‐ graft ‐DA12 dropped most dramatically and declined with increasing grafting ratio of DA12, indicating improvement of the surface activity of PVA by introduction of hydrophobic alkyl chains and hydrophilic cationic groups. Copyright © 2011 Society of Chemical Industry     

Thermal and dynamic mechanical behavior of bionanocomposites: Fumed silica nanoparticles dispersed in poly(vinyl pyrrolidone), chitosan,and poly(vinyl alcohol)

Various bionanocomposites were prepared by dispersing fumed silica (SiO₂) nanoparticles in biocompatible polymers like poly(vinyl pyrrolidone) (PVP), chitosan (Chi), or poly(vinyl alcohol) (PVA). For the bionanocomposites preparation, a solvent evaporation method was followed. SEM micrographs verified fine dispersion of silica nanoparticles in all used polymer matrices of composites with low silica content. Sufficient interactions between the functional groups of the polymers and the surface hydroxyl groups of SiO₂ were revealed by FTIR measurements. These interactions favored fine dispersion of silica. Mechanical properties such as tensile strength and Young's modulus substantially increased with increasing the silica content in the bionanocomposites. Thermogravimetric analysis (TGA) showed that the polymer matrices were stabilized against thermal decomposition with the addition of fumed silica due to shielding effect, because for all bionanocomposites the temperature, corresponding to the maximum decomposition rate, progressively shifted to higher values with increasing the silica content. Finally, dynamic thermomechanical analysis (DMA) tests showed that for Chi/SiO₂ and PVA/SiO₂ nanocomposites the temperature of β‐relaxation observed in tanδ curves, corresponding to the glass transition temperature T_g, shifted to higher values with increasing the SiO₂ content. This fact indicates that because of the reported interactions, a nanoparticle/matrix interphase was formed in the surroundings of the filler, where the macromolecules showed limited segmental mobility. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Thermal characteristics of interpenetrating polymer networks composed of poly(vinyl alcohol) and poly(N‐isopropylacrylamide)

Interpenetrating polymer networks (IPNs) composed of poly(vinyl alcohol) (PVA) and poly(N‐isopropylacrylamide) (PNIPAAm) were prepared by the sequential‐IPN method. The thermal characterization of the IPNs was investigated using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and dielectric analysis (DEA). Depression of the melting temperature (T_m) of the PVA segment in IPNs was observed with increasing PNIPAAm content using DSC. DEA was employed to ascertain the glass‐transition temperature (T_g) of IPNs. From the result of DEA, IPNs exhibited two T_g values, indicating the presence of phase separation in the IPNs. The thermal decomposition of IPNs was investigated using TGA and appeared at near 200°C. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 881–885, 2003     

Thermal properties and non‐isothermal crystallization behavior of biodegradable poly(p‐dioxanone)/poly(vinyl alcohol) blends

Blends of two biodegradable semicrystalline polymers, poly(p‐dioxanone) (PPDO) and poly(vinyl alcohol) (PVA) were prepared with different compositions. The thermal stability, phase morphology and thermal behavior of the blends were studied by using thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and differential scanning calorimetry (DSC). From the TGA data, it can be seen that the addition of PVA improves the thermal stability of PPDO. DSC analysis showed that the glass transition temperature (T_g) and the melting temperature (T_m) of PPDO in the blends were nearly constant and equal to the values for neat PPDO, thus suggesting that PPDO and PVA are immiscible. It was found from the SEM images that the blends were phase‐separated, which was consistent with the DSC results. Additionally, non‐isothermal crystallization under controlled cooling rates was explored, and the Ozawa theory was employed to describe the non‐isothermal crystallization kinetics. Copyright © 2006 Society of Chemical Industry     

Hydrophilic modification of poly(vinylidene fluoride) membrane with poly(vinyl pyrrolidone) via a cross‐linking reaction

A highly hydrophilic hollow fiber poly(vinylidene fluoride) (PVDF) membrane [PVDF‐cl‐poly(vinyl pyrrolidone) (PVP) membrane] was prepared by a cross‐linking reaction with the hydrophilic PVP, which was immobilized firmly on the outer surface and cross‐section of the PVDF hollow fiber membrane via a simple immersion process. The cross‐linking between PVDF and PVP was firstly verified via nuclear magnetic resonance measurement on PVP solution after cross‐linking. The hydrophilic stability of the modified PVDF membrane was evaluated by measuring the pure water flux after different times of immersion and drying. The anti‐fouling properties were estimated by cyclic filtration of protein solution. When the cross‐linking time was as long as 6 hr and the PVP content reached 5 wt %, the pure water flux (J_v) was constant as ～ 600 L m^?2 hr^?1. The hydrophilicity of the PVDF‐cl‐PVP membrane was significantly enhanced and exhibited a good stability. The PVDF‐cl‐PVP membrane showed an excellent anti‐protein‐fouling performance during the cyclic filtration of bovine serum albumin solution. Therefore, a highly hydrophilic and anti‐protein‐fouling PVDF hollow fiber membrane with a long‐term stability can be prepared by a simple and economical cross‐linking process with PVP. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Release of salicylic acid through poly(vinyl alcohol)/poly(vinyl pyrrolidone) and poly(vinyl alcohol‐g‐N‐vinyl‐2‐pyrrolidone) membranes

A controlled release profile of salicylic acid (SA) for transdermal administration has been developed. Poly (vinyl alcohol) (PVA) and Poly(vinyl alcohol)/Poly(vinyl pyrrolidone) (PVP) blended preparations were used to prepare the membranes by solvent‐casting technique. The release of the drug from the membranes was evaluated at in vitro conditions. The effects of PVA/PVP (v/v) ratio, pH, SA concentration and temperature were investigated. 60/40 (v/v) PVA/PVP ratio was found to be the best ratio for the SA release. Increase in pH and temperature was observed to increase the transport of SA. Instead of blending PVA with PVP, N‐Vinyl‐2‐pyrrolidone (VP) was grafted onto the PVA and the delivery performance for SA was compared with that of the blended PVA/PVP membranes. Grafted membranes gave higher transport percentages than the blended membranes. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:1244–1253, 2006     

Synthesis of poly(vinyl alcohol)‐graft‐poly(ε‐caprolactone) and poly(vinyl alcohol)‐graft‐poly(lactide) in melt with magnesium hydride as catalyst

Grafting of poly(ε‐caprolactone) (PCL) and poly(lactide) (PLA) chains on poly(vinyl alcohol) backbone (PVA degree of hydrolysis 99%) was investigated using MgH₂ environmental catalyst and melt‐grown ring‐opening polymerization (ROP) of ε‐caprolactone (CL) and L ‐lactide (LA), that avoiding undesirable toxic catalyst and solvent. The ability of MgH₂ as catalyst as well as yield of reaction were discussed according to various PVA/CL/MgH₂ and PVA/LA/MgH₂ ratio. PVA‐g‐PCL and PVA‐g‐PLA were characterized by ¹H‐ and ¹³C‐NMR, DSC, SEC, IR. For graft copolymers easily soluble in tetrahydrofuran (THF) or chloroform, wettability and surface energy of cast film varied in relation with the length and number of hydrophobic chains. Aqueous solution of micelle‐like particles was realized by dissolution in THF then addition of water. Critical micelle concentration (CMC) decreased with hydrophobic chains. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Characterization of strong polyelectrolyte hydrogels based on poly(vinyl alcohol)

Maleic anhydride (MA) was grafted onto both partially and fully hydrolyzed poly(vinyl alcohol) (PVA) in the presence of an initiator. Strong polyelectrolyte polymers were prepared by sulfonation of PVA–MA grafts. The sulfonation was completed by reaction of hydroxyl groups of PVA–MA grafts with two different sulfonating reagents (chlorosulfonic acid and pyridine sulfonic acid). The sulfonation degree was evaluated by acid–base titration and ¹H NMR analysis. The solution behaviour of the prepared grafts was evaluated from viscosity measurements. Four kinds of water‐insoluble PVA–MA and PVA–MA‐SO₃H hydrogels were prepared by heat treatment, physical gelation and chemical crosslinking with different weight ratios of N,N‐methylene bisacrylamide (MBA) crosslinker. The swelling parameters were measured for all prepared gels in deionized water and aqueous solutions at different pH values from 2 to 12 having constant ionic strength (I = 0.1). All gels exhibit a different swelling behaviour upon environmental pH changes. Copyright © 2004 Society of Chemical Industry     

Structure and properties of syndiotacticity‐rich poly(vinyl alcohol) prepared through saponification of drawn poly(vinyl trifluoroacetate) with gaseous ammonia

The structure and properties of syndiotacticity‐rich poly(vinyl alcohol) (s‐PVA) prepared through the saponification of drawn poly(vinyl trifluoroacetate) (PVTFAc) with gaseous ammonia were studied. The PVTFAc samples with s‐diad % of 59 and 64 were used. The s‐PVAs had low densities and showed X‐ray diagrams similar to the fiber diagram of PVA with indistinct 100, 101, 101¯, and 200 plane reflections and without the plane reflections seen at the equator of a typical fiber diagram, such as 001, 201, and 002. The s‐PVAs had melting points comparable to those of saponified and heat‐drawn samples, indicating a PVA with the typical fiber structure as seen in the X‐ray diagram of a sample. The intensity of the 916 cm⁻¹ band in the infrared spectrum related to syndiotactic diads decreased with drawing, suggesting an increase in the crystallinity. Crystals with more defects are thought to be produced in saponification. The s‐PVA films drawn 16 times and saponified had a Young's modulus and strength at break of 22 and 1.5 GPa for the sample from S‐59 and 14 and 1.2 GPa for the sample from S‐64, respectively. The crystallization‐sensitive band of 1145 cm⁻¹ in the infrared spectra of the saponified samples was weak. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 467–474, 2001     

Synthesis of poly(vinyl butyral)s in homogeneous phase and their thermal properties

The condensation reaction of butyraldehyde (BA) with poly(vinyl alcohol) (PVA) to give poly(vinyl butyral) (PVB) was studied in detail using N‐methyl‐2‐pyrrolidone (NMP) as solvent for PVA and PVBs. PVBs having various degrees of acetalization were obtained. The acetalization reaction under a variety of conditions gave at best a polymer with 97% acetalization. The extent of modification and the structure of the polymer, i.e., the ratio of acetal units from meso and racemic dyads of PVA, were determined by ¹H‐NMR. The acetalization degree was reflected in the solubility of PVB; all products were soluble in NMP. PVBs were characterized by IR spectroscopy and ¹H and ¹³C‐NMR. The glass transition temperatures of PVBs, determined by DSC, increased as vinyl alcohol units increased and displayed a positive departure from linearity. Thermal degradation of PVBs was studied using differential thermal analysis (DTA) and thermogravimetry (TGA) under dynamic conditions in nitrogen. The content of hydroxyl groups had an effect on the thermal stability of PVBs; the thermal stability of PVBs decreased as vinyl alcohol units increased. The apparent activation energy of the decomposition was determined by the Kissinger and Flynn–Wall methods, which agree well. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5007–5017, 2006