Synthesis of biodegradable and biocompatible ABC triblock copolymers

A facile approach is offered to synthesize well‐defined amphiphilic ABC triblock copolymers composed of poly(ethylene glycol) monomethyl ether (MPEO) as A block, poly(L ‐lysine) (PLLys) as B block, and poly(ε‐caprolactone) (PCL) as C block by a combination of ring‐opening polymerization (ROP) and click reactions. The propargyl‐terminated poly(Z‐L ‐lysine)‐block‐poly(ε‐caprolactone) (MPEO‐PzLLys‐PCL) diblock copolymers were synthesized via the ring‐opening polymerization of N^ε‐carbobenzoxy‐L ‐lysine N‐carboxyanhydride (Z‐L ‐Lys NCA) in DMF at room temperature using propargyl amine as an initiator and the resulting amino‐terminated poly(Z‐L ‐lysine) then used in situ as a macroinitiator for the polymerization of ε‐caprolactone in the presence of stannous octoate as a catalyst. The triblock copolymers poly(ethylene glycol) monomethyl ether –block‐poly(Z‐L ‐lysine)‐block‐poly(ε‐caprolactone) (MPEO‐PzLLys‐PCL) were synthesized via the click reaction of the propargyl‐terminated PzLLys‐PCL and azido‐terminated poly(ethylene glycol) monomethyl ether (PEO‐N₃) in the presence of CuBr and 1,1,4,7,7‐pentamethyldiethylenetriamine (PMDETA) catalyst system. After the removal of Z groups of L ‐lysine units, amphiphilic and biocompatible ABC triblock copolymers MPEO‐PLLys‐PCL were obtained. The structural characteristics of these ABC triblock copolymers and corresponding precursors were characterized by NMR, IR, and GPC. These results showed the click reaction was highly effective. Therefore, a facile approach is offered to synthesize amphiphilic and biocompatible ABC triblock copolymers consisting of polyether, polypeptide and polyester. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Semifluorinated ABA triblock copolymers: Synthesis,characterization, and amphiphilic properties

In this study a series of novel semifluorinated ABA triblock copolymers with different fluorinated segment lengths and different fluorocarbon side‐chain structures were synthesized via atom transfer radical polymerization (ATRP) and macroinitiator techniques. The macroinitiator, telechelic bromine terminated polystyrene, was obtained from bulk ATRP of styrene with α,α′‐dibromo‐p‐xylene as the initiator and cuprous bromide/α,α′‐bispyridine complex as the catalyst. The polymerization reactions of 2‐[(perfluorononenyl)oxy] ethyl methacrylate and ethylene glycol monomethacrylate monoperfluorooctanoate were initiated by the macroinitiator in the presence of additional catalyst. The characterization of the block copolymers was performed by gel permeation chromatography, ¹H‐NMR spectroscopy, and differential scanning calorimetry. The surface activities of the block copolymers in toluene were investigated with the Wilhelmy plate method. The solid surface energy of the block copolymers was determined by measurement of the contact angles. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2625–2633, 2002     

Synthesis of water-soluble ABC triblock copolymers containing polypeptide segments

This article describes a facile approach for the synthesis of water-soluble ABC triblock copolymers through a combination of atom transfer radical polymerization (ATRP) and click reactions. The bromine-terminated MPEO–PtBA–Br precursor was first prepared by ATRP, and converted into the azido-terminated precursor MPEO–PtBA–N₃ by a simple nucleophilic substitution. Then, MPEO–PtBA–PzLLys triblock copolymers were synthesized via the click reaction of MPEO–PtBA–N₃ and the propargyl-terminated poly(N^ε-carbobenzoxy-l-lysine)s (PzLLys). The water-soluble MPEO–PAA–PLLys ABC triblock copolymers were obtained from the hydrolysis process. The structures of these block copolymers were characterized by NMR, IR and GPC.     

Synthesis of poly[(decanoic acid)‐block‐styrene] diblock copolymers and their self‐assembly behavior in aqueous medium

Diblock copolymers, poly[(10‐hydroxydecanoic acid)‐block‐styrene] (PHDA‐b‐PSt), were synthesized by combining enzymatic condensation polymerization of HDA and atom transfer radical polymerization (ATRP) as of St PHDA was first obtained via enzymatic condensation polymerization catalyzed by Novozyme‐435. Subsequently, one terminus of the PHDA chains was modified by reaction with α‐bromopropionyl bromide and the other terminus was protected by chlorotrimethylsilane. The resulting monofunctional macroinitiator was used subsequently in ATRP of St using CuCl/2,2′‐bipyridine as the catalyst system to afford diblock copolymers including biodegradable PHDA blocks and well‐defined PSt blocks. Polymeric nanospheres were prepared by self‐assembly of the PHDA‐b‐PSt diblock copolymers in aqueous medium. Copyright © 2008 Society of Chemical Industry     

Synthesis of block copolymers with thermodynamically compatible chain segments: di‐ and triblock copolymers of polystyrene and poly(2,6‐dimethyl‐1,4‐phenylene oxide)

Mono‐ and bifunctional poly(phenylene oxide) (PPO) macroinitiators for atom transfer radical polymerization (ATRP) were prepared by esterification of mono‐ and bishydroxy telechelic PPO with 2‐bromoisobutyryl bromide. The macroinitiators were used for ATRP of styrene to give block copolymers with PPO and polystyrene (PS) segments, namely PPO‐block‐PS and PS‐block‐PPO‐block‐PS. Various ligands were studied in combination with CuBr as ATRP catalysts. Kinetic investigations revealed controlled polymerization processes for certain ligands and temperature ranges. Thermal analysis of the block copolymers by means of DSC revealed only one glass transition temperature as a result of the compatibility of the PS and PPO chain segments and the formation of a single phase; this glass transition temperature can be adjusted over a wide temperature range (ca 100–199 °C), depending on the composition of the block copolymer. Copyright © 2005 Society of Chemical Industry     

Synthesis of liquid crystalline–amorphous block copolymers by combination of CFRP and ATRP mechanisms

Block copolymers of liquid crystalline 6‐(4‐cyanobiphenyl‐4′‐oxy) hexyl acrylate (LC6) and styrene (St) were obtained by the combination of two different free‐radical polymerization mechanisms namely conventional free‐radical polymerization (CFRP) and atom transfer radical polymerization (ATRP). In the first part, thermosensitive azo alkyl halide, difunctional initiator (AI), was prepared and then used for CFRP of LC6 monomer. The obtained bromine‐ended difunctional liquid crystalline polymers (PLC6) were used as initiators in ATRP of St, in bulk in conjunction with CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) as catalyst. In the second part, AI was firstly polymerized by CFRP in the presence of St and then the obtained difunctional bromine ended polystyrenes (PSt) were used as initiators in ATRP of LC6 in diphenyl ether solvent in conjuction with CuBr/PMDETA. The spectral, thermal, and optical measurements confirmed a fully controlled living polymerization, which results in formation of ABA‐type block copolymers with very narrow polydispersities. In both cases, blocks of the different chemical composition were segregated in the solid and melt phases. The mesophase transition temperatures of the liquid crystalline block were found to be very similar to those of the corresponding homopolymers. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Synthesis and characterization of block comb‐like copolymers P(A‐MPEO)‐block‐PSt

Amphiphilic block comb‐shaped copolymers, poly[poly(ethylene oxide) methyl ether acrylate]‐block‐polystyrene [P(A‐MPEO)‐block‐PSt] with PSt as a handle, were successfully synthesized via a macromonomer technique. The reaction of MPEO with acryloyl chloride yielded a macromonomer, A‐MPEO. The macroinitiator PSt capped with the dithiobenzoate group (PSt‐SC(S)Ph) was prepared by reversible addition–fragmentation transfer (RAFT) polymerization of styrene in the presence of benzyl dithiobenzoate, and used as macroinitiator in the controlled radical block copolymerization of A‐MPEO at room temperature under ⁶⁰Co irradiation. After the unreacted macromonomer A‐MPEO had been removed by washing with hot saturated saline water, block comb‐shaped copolymers were obtained. Their structure was characterized by ¹H NMR spectroscopy and gel permeation chromatography. The phase transition and self‐assembling behaviour were investigated by atomic force microscope and differential scanning calorimetry. Copyright © 2004 Society of Chemical Industry     

AB‐ and ABC‐type di‐ and triblock copolymers of poly[styrene‐block‐(ε‐caprolactone)] and poly[styrene‐block‐(ε‐caprolactone)‐block‐lactide]: synthesis,characterization and thermal studies

Polystyrene terminated with benzyl alcohol units was employed as a macroinitiator for ring‐opening polymerization of ε‐caprolactone and L ‐lactide to yield AB‐ and ABC‐type block copolymers. Even though there are many reports on the diblock copolymers of poly(styrene‐block‐lactide) and poly(styrene‐block‐lactone), this is the first report on the poly(styrene‐block‐lactone‐block‐lactide) triblock copolymer consisting of two semicrystalline and degradable segments. The triblock copolymers exhibited twin melting behavior in differential scanning calorimetry (DSC) analysis with thermal transitions corresponding to each of the lactone and lactide blocks. The block derived from ε‐caprolactone also showed crystallization transitions upon cooling from the melt. In the DSC analysis, one of the triblock copolymers showed an exothermic transition well above the melting temperature upon cooling. Thermogravimetric analysis of these block copolymers showed a two‐step degradation curve for the diblock copolymer and a three‐step degradation for the triblock copolymer with each of the degradation steps associated with each segment of the block copolymers. The present study shows that it is possible to make pure triblock copolymers with two semicrystalline segments which also consist of degradable blocks. Copyright © 2009 Society of Chemical Industry     

Graft copolymerization of methylmethacrylate with N‐substituted maleimide‐styrene copolymer by ATRP

Atom transfer radical polymerization (ATRP) was employed to prepare graft copolymers having poly(MBr)‐alt‐poly(St) copolymer as backbone and poly(methyl methacrylate) (PMMA) as branches to obtain heat resistant graft copolymers. The macroinitiator was prepared by copolymerization of bromine functionalized maleimide (MBr) with styrene (St). The polymerization of MMA was initiated by poly(MBr)‐alt‐poly(St) carrying bromine groups as macroinitiator in the presence of copper bromide (CuBr) and bipyridine (bpy) at 110°C. Both macroinitiator and graft copolymers were characterized by ¹H NMR, GPC, DSC, and TGA. The ATRP graft copolymerization was supported by an increase in the molecular weight (MW) of the graft copolymers as compared to that of the macroinitiator and also by their monomodal MW distribution. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Synthesis and characterization of PMMA‐b‐PBMA block copolymers by atom transfer radical polymerization

The synthesis of diblock copolymers using atom transfer radical polymerization, ATRP, of n‐butyl methacrylate, BMA, and methyl methacrylate, MMA, is reported. These copolymers were prepared from 2‐bromoisobutyryl‐terminated macroinitiators of poly(MMA) and poly(BMA), using copper chloride, CuCl,/N,N,N′,N″,N″‐pentamethyldiethylenetretramine, PMDETA, as the catalyst system, at 100°C in bulk and in benzonitrile solution. The block copolymers were characterized by means of size‐exclusion chromatography, SEC, and ¹H‐NMR spectroscopy. The SEC analysis of the synthesized diblock copolymers confirmed important differences in the molecular weight control depending on the reaction medium (solvent effect) and the chemical structure of the macroinitiator used. In addition, differential scanning calorimetry, (DSC) measurements were performed, showing for all the copolymers a phase separation. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2683–2691, 2002     

Synthesis and characterization of poly(n‐butyl methacrylate)‐b‐polystyrene diblock copolymers by atom transfer radical emulsion polymerization

Poly(n‐butyl methacrylate) (PBMA)‐b‐polystyrene (PSt) diblock copolymers were synthesized by emulsion atom transfer radical polymerization (ATRP). PBMA macroinitiators that contained alkyl bromide end groups were obtained by the emulsion ATRP of n‐butyl methacrylate with BrCH₃CHCOOC₂H₅ as the initiator; these were used to initiate the ATRP of styrene (St). The latter procedure was carried out at 85°C with CuCl/4,4′‐di(5‐nonyl)‐2,2′‐bipyridine as the catalyst and polyoxyethylene(23) lauryl ether as the surfactant. With this technique, PBMA‐b‐PSt diblock copolymers were synthesized. The polymerization was nearly controlled; the ATRP of St from the macroinitiators showed linear increases in number‐average molecular weight with conversion. The block copolymers were characterized with IR spectroscopy, ¹H‐NMR, and differential scanning calorimetry. The effects of the molecular weight of the macroinitiators, macroinitiator concentration, catalyst concentration, surfactant concentration, and temperature on the polymerization were also investigated. Thermodynamic data and activation parameters for the ATRP are also reported. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 2123–2129, 2005     

High molecular weight diblock and ABA/ABC triblock copolymers of tert‐butyl (meth)acrylate

AB diblock copolymers were prepared by use of poly(tert‐butyl (meth)acrylate) (PtBA/PtBMA) as monofunctional macroinitiator in atom transfer radical polymerization of various (meth)acrylates (methyl, butyl) in the presence of the CuBr/N, N, N′, N′, N″‐pentamethyldiethylenetriamine catalyst system. Then using the diblock copolymer as macroinitiator with a bromine atom at the chain end, ABC and ABA triblock copolymers containing at least one PtBA or PtBMA segment were synthesized via polymerization of the selected (meth)acrylic monomer. Gel permeation chromatography was applied to determine molecular weights and polydispersity indices. The latter, for block copolymers prepared without deactivator addition, were in the range 1.2‐1.6 with a high degree of polymerization (150‐500). The chemical compositions of the block copolymers were characterized with ¹H nuclear magnetic resonance. The kind of combined segments and their lengths influenced the glass transition temperature (T_g) determined by differential scanning calorimetry. Copyright © 2012 Society of Chemical Industry     

Synthesis of poly(cyclohexene oxide)‐block‐polystyrene by combination of radical‐promoted cationic polymerization,atom transfer radical polymerization and click chemistry

The combination of radical‐promoted cationic polymerization, atom transfer radical polymerization (ATRP) and click chemistry was employed for the efficient preparation of poly(cyclohexene oxide)‐block‐polystyrene (PCHO‐b‐PSt). Alkyne end‐functionalized poly(cyclohexene oxide) (PCHO‐alkyne) was prepared by radical‐promoted cationic polymerization of cyclohexene oxide monomer in the presence of 1,2‐diphenyl‐2‐(2‐propynyloxy)‐1‐ethanone (B‐alkyne) and an onium salt, namely 1‐ethoxy‐2‐methylpyridinium hexafluorophosphate, as the initiating system. The B‐alkyne compound was synthesized using benzoin photoinitiator and propargyl bromide. Well‐defined bromine‐terminated polystyrene (PSt‐Br) was prepared by ATRP using 2‐oxo‐1,2‐diphenylethyl‐2‐bromopropanoate as initiator. Subsequently, the bromine chain end of PSt‐Br was converted to an azide group to obtain PSt‐N₃ by a simple nucleophilic substitution reaction. Then the coupling reaction between the azide end group in PSt‐N₃ and PCHO‐alkyne was performed with Cu(I) catalysis in order to obtain the PCHO‐b‐PSt block copolymer. The structures of all polymers were determined. Copyright © 2010 Society of Chemical Industry     

Chemoenzymatic synthesis of the novel amphiphilic diblock copolymer poly[caprolactone‐block‐(glycidyl methacrylate)] from a bifunctional initiator and its micellization behavior

The chemoenzymatic synthesis of a novel diblock copolymer consisting of a hydrocarbon block of polycaprolactone (PCL) and an epoxy‐based block of poly(glycidyl methacrylate) (PGMA) was achieved by the combination of enzymatic ring‐opening polymerization (eROP) and atom transfer radical polymerization (ATRP). A trichloromethyl‐terminated PCL macrointiator was obtained via Novozyme 435‐catalyzed eROP of ε‐caprolactone from a bifunctional initiator, 2,2,2‐trichloroethanol, under anhydrous conditions. PCL‐b‐PGMA diblock copolymers were synthesized in a subsequent ATRP of glycidyl methacrylate. The kinetics analysis of ATRP indicated a ‘living’/controlled radical polymerization. The macromolecular structure and thermal properties of the PCL macroinitiator and of the diblock copolymer were characterized using NMR spectroscopy, gel permeation chromatography and differential scanning calorimetry. The well‐defined PCL‐b‐PGMA amphiphilic diblock copolymer self‐assembled in aqueous solution into nanoscale micelles. The size and shape of the resulting micelles were investigated using dynamic light scattering, transmission electron microscopy and tapping‐mode atomic force microscopy. Copyright © 2007 Society of Chemical Industry     

Synthesis of poly(paraphenylene vinylene)—polystyrene‐based rod‐coil block copolymer by atom transfer radical polymerization: Toward a self‐organized lamellar semiconducting material

Atom transfer radical polymerization (ATRP) was used as a versatile route to well‐defined poly(diethylhexyl‐p‐phenylenevinylene‐b‐styrene) (PPV‐b‐PS) semiconducting block copolymers. For this purpose, original conjugated macroinitiators were synthesized from DEH‐PPV and further used for the copolymerization reaction. The microphase‐separated morphologies obtained with the semiconducting PPV‐b‐PS block copolymer fulfill the basic structural requirements required to build efficient organic photovoltaic devices. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Amphiphilic diblock copolymers containing poly(N‐hexylisocyanate): Monolayer behavior at the air–water interface

The behavior of amphiphilic diblock copolymers containing 80–89% of poly(N‐hexylisocyanate) (PHIC) with different hydrophobic segments spread at the air–water interface has been studied. Surface pressure‐area isotherms (π‐A) at the air–water interface were determined. It was found that these diblock copolymers form stable monolayers and the isotherms present a pseudoplateau region at low surface pressure, irrespective of the nature of the partner block: poly(styrene) (PS) or poly(isoprene). Surface pressure variation at the semidilute region of the monolayer was expressed in terms of the scaling laws as power function of the surface concentration. The critical exponents of the excluded volume ν obtained for copolymers with PHIC and PS blocks are 0.58 for the copolymer with 85% of PHIC and 15% of PS, and 0.63 for the copolymer with 89% of PHIC and 11% of PS. The hydrophobicity degree of the diblock copolymers was estimated from the determination of the surface energy values by wettability measurements. The morphology of the monolayers was determined by means of Brewster angle microscopy. Molecular dynamic simulation was performed to explain the experimental behavior of diblock copolymers at the air–water interface. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Preparation of well‐defined block copolymer having one polystyrene segment and another poly(styrene‐alt‐maleic anhydride) segment with RAFT polymerization

Block copolymers, polystyrene‐b‐poly(styrene‐co‐maleic anhydride), have been prepared by reversible addition‐fragmentation chain transfer (RAFT) polymerization technique using three different approaches: 1‐phenylethyl phenyldithioacetate (PEPDTA) directly as RAFT agent, mediated polystyrene (PS) block as the macromolecular PS‐RAFT agent and mediated poly(styrene‐maleic anhydride) (SMA) block with alternating sequence as the macromolecular SMA‐RAFT agent. Copolymers synthesized in the one‐step method using PEPDTA as RAFT agent possess one PS block and one SMA block with gradient structure. When the macromolecular RAFT agents are employed, copolymers with one PS block and one alternating SMA block can be produced. However, block copolymers with narrow molecular weight distribution (MWD) can only be obtained using the PS‐RAFT agent. The MWD deviates considerably from the typical RAFT polymerization system when the SMA is used as the RAFT agent. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and characterization of PBMA‐b‐PSt‐b‐PBMA triblock copolymers by atom transfer radical emulsion polymerization

Poly(n‐butyl methacrylate)‐b‐polystyrene‐b‐poly(n‐butyl methacrylate) (PBMA‐b‐PSt‐b‐PBMA) triblock copolymers were successfully synthesized by emulsion atom transfer radical polymerization (ATRP). Difunctional polystyrene (PSt) macroinitiators that contained alkyl chloride end‐groups were prepared by ATRP of styrene (St) with CCl₄ as initiator and were used to initiate the ATRP of butyl methacrylate (BMA). The latter procedure was carried out at 85°C with CuCl/4,4′‐di (5‐nonyl)‐2,2′‐bipyridine (dNbpy) as catalyst and polyoxyethylene (23) lauryl ether (Brij35) as surfactant. Using this technique, triblock copolymers consisting of a PSt center block and PBMA terminal blocks were synthesized. The polymerization was nearly controlled, ATRP of St from those macroinitiators showed linear increases in the number average molecular weight (Mn) with conversion. The block copolymers were characterized with infrared (IR) spectroscopy, hydrogen‐1 nuclear magnetic resonance (¹HNMR), and differential scanning calorimetry (DSC). The effects of the molecular weight of macroinitiators, concentration of macroinitiator, catalyst, emulsion, and temperature on the polymerization were also investigated. Thermodynamic data and activation parameters for the ATRP were also reported. POLYM. ENG. SCI., 45:1508–1514, 2005. © 2005 Society of Plastics Engineers     

Synthesis and characterization of copolymers with the same proportions of polystyrene and poly(ethylene oxide) compositions but different connection sequence by the efficient Williamson reaction

The AB type diblock PS‐b‐PEO and ABA type triblock PS‐b‐PEO‐b‐PS copolymers containing the same proportions of polystyrene (PS) and poly(ethylene oxide) (PEO) but different connection sequence were synthesized and investigated. Using the sequential living anionic polymerization and ring‐opening polymerization mechanisms, diblock PS‐b‐PEO copolymers with one hydroxyl group at the PEO end were obtained. Then, using the classic and efficient Williamson reaction (realized in a ‘click’ style), triblock PS‐b‐PEO‐b‐PS copolymers were achieved by a coupling reaction between hydroxyl groups at the PEO end of PS‐b‐PEO. The PS‐b‐PEO and PS‐b‐PEO‐b‐PS copolymers were well characterized by ¹H NMR spectra and SEC measurements. The critical micelle concentration (CMC) and thermal behaviors were also investigated by steady‐state fluorescence spectra and DSC, respectively. The results showed that, because the PEO segment in triblock PS‐b‐PEO‐b‐PS was more restricted than that in diblock PS‐b‐PEO copolymer, the former PS‐b‐PEO‐b‐PS copolymer always gave higher CMC values and lower crystallization temperature (T_c), melting temperature (T_m) and degree of crystallinity (X_c) parameters. © 2015 Society of Chemical Industry     

Synthesis of amphiphilic poly(methyl methacrylate)‐block‐poly(methacrylic acid) diblock copolymers by atom transfer radical polymerization

Atom transfer radical polymerization (ATRP) of 1‐(butoxy)ethyl methacrylate (BEMA) was carried out using CuBr/2,2′‐bipyridyl complex as catalyst and 2‐bromo‐2‐methyl‐propionic acid ester as initiator. The number average molecular weight of the obtained polymers increased with monomer conversion, and molecular weight distributions were unimodal throughout the reaction and shifted toward higher molecular weights. Using poly(methyl methacrylate) (PMMA) with a bromine atom at the chain end, which was prepared by ATRP, as the macro‐initiator, a diblock copolymer PMMA‐block‐poly [1‐(butoxy)ethyl methacrylate] (PMMA‐b‐PBEMA) has been synthesized by means of ATRP of BEMA. The amphiphilic diblock copolymer PMMA‐block‐poly(methacrylic acid) can be further obtained very easily by hydrolysis of PMMA‐b‐PBEMA under mild acidic conditions. The molecular weight and the structure of the above‐mentioned polymers were characterized with gel permeation chromatography, infrared spectroscopy and nuclear magnetic resonance. Copyright © 2005 Society of Chemical Industry