Electrospinning of antibacterial poly(vinylidene fluoride) nanofibers containing silver nanoparticles

Poly(vinylidene fluoride) (PVDF) nanofibrous mats containing silver nanoparticles were prepared by electrospinning. The diameter of the nanofibers ranged between 100 and 300 nm, as revealed by scanning electron microscopy. The silver nanoparticles were dispersed, but some aggregation was observed with transmission electron microscopy. The content of silver nanoparticles incorporated into the PVDF nanofibrous mats was determined by inductively coupled plasma and X‐ray photoelectron spectroscopy. The antibacterial activities of the samples were evaluated with the colony‐counting method against Staphylococcus aureus (Gram‐positive) and Klebsiella pneumoniae (Gram‐negative) bacteria. The results indicate that the PVDF nanofibrous mats containing silver nanoparticles showed good antibacterial activity compared to the PVDF nanofiber control. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Electrospun antibacterial nylon nanofibers through in situ synthesis of nanosilver: preparation and characteristics

A new method for production of nylon nanofibers with antibacterial properties containing silver nanoparticles (nylon nanofibers/Ag NPs) is introduced via in situ synthesis of nano-silver by reduction of silver nitrate in the polymer solution prior to electrospinning. The properties of the electrospinning solutions and the structures of the electrospun fibers were studied using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDAX), UV?Cvis spectrophotometer and reflection spectrophotometer. Further, the antibacterial properties of the nanofibers were investigated against Escherichia coli (Gram-negative) and Staphylococcus aureus (Gram-positive) bacteria. Interestingly, an antibacterial properties has been found on nylon 6 nanofibers while the nylon nanofibers/Ag NPs showed excellent antibacterial activities against both tested bacteria. The produced nylon nanofibers/Ag NPs can be a good candidate for biomedical applications, water and air filtration.     

Novel core‐sheath antimicrobial nanofibrous mats

The poor mechanical properties of electrospun materials remain one of the major hindrances toward their practical application. In this study, we report the synthesis of core‐sheath nanofibrous mats to enhance the mechanical properties of an antimicrobial polymer nanofiber for application in filter media. This objective was achieved via coaxial electrospinning of poly[styrene‐co‐N‐(N′,N′‐dimethyl‐3‐aminopropyl)maleimide] as the sheath which is an antimicrobial polymer and nylon 6 polymer for the core which is well reported for exceptional mechanical properties. Extensive characterization of these fibers was performed using scanning electron microscopy, scanning transmission electron microscopy, confocal fluorescence microscopy as well as attenuated total reflectance Fourier transform spectroscopy to provide evidence of the core‐sheath morphology. Antimicrobial evaluation was also carried out on the fabricated fibers via the live/dead fluorescence technique. This was done to determine if the poly[styrene‐co‐N‐(N′,N′‐dimethyl‐3‐aminopropyl)maleimide] retained its antimicrobial activity. The fibers were found to be effective against the Gram‐positive Staphylococcus aureus (ATCC25925) and Gram‐negative Pseudomonas aeruginosa (ATCC27853). Subsequent tensile testing and filtration experiments provided evidence that the incorporation of the nylon core improved mechanical properties of the nanofiber mats. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46303.     

Functionally modified,melt‐electrospun thermoplastic polyurethane mats for wound‐dressing applications

The electrospinning of a polymer melt is an interesting process for medical applications because it eliminates the cytotoxic effects of solvents in the electrospinning solution. Wound dressings made from thermoplastic polyurethane (TPU), particularly as a porous structured electrospun membrane, are currently the focus of scientific and commercial interest. In this study, we developed a functionalized fibrillar structure as a novel antibacterial wound‐dressing material with the melt‐electrospinning of TPU. The surface of the fibers was modified with poly(ethylene glycol) (PEG) and silver nanoparticles (nAg's) to improve their wettability and antimicrobial properties. TPU was processed into a porous, fibrous network of beadless fibers in the micrometer range (4.89 ± 0.94 μm). The X‐ray photoelectron spectroscopy results and scanning electron microscopy images confirmed the successful incorporation of nAg's onto the surface of the fiber structure. An antibacterial test indicated that the PEG‐modified nAg‐loaded TPU melt‐electrospun structure had excellent antibacterial effects against both a Gram‐positive Staphylococcus aureus strain and Gram‐negative Escherichia coli compared to unmodified and PEG‐modified TPU fiber mats. Moreover, modification with nAg's and PEG increased the water‐absorption ability in comparison to unmodified TPU. The cell viability and proliferation on the unmodified and modified TPU fiber mats were investigated with a mouse fibroblast cell line (L929). The results demonstrate that the PEG‐modified nAg‐loaded TPU mats had no cytotoxic effect on the fibroblast cells. Therefore, the melt‐electrospun TPU fiber mats modified with PEG and nAg have the potential to be used as antibacterial, humidity‐managing wound dressings. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40132.     

Fabrication and Antibacterial Activity of Electrospun Nylon 6 Nanofibers Grafted With 2-Substituted Vinylimidazoles

The authors present the fabrication of electrospun nanofibers with antimicrobial properties by the UV-initiated grafting (photo-grafting) of 2-substituted vinylimidazoles onto nylon 6 nanofibers. The characterization was performed using IR spectroscopy (ATR-FTIR) and scanning electron microscopy (SEM-EDX). The antimicrobial properties of the grafted electrospun nylon 6 nanofibers were evaluated against Escherichia coli and Staphylococcus aureus as model challenge microorganisms, using the dynamic shake flask method. All the grafted electrospun nylon 6 nanofibers exhibited excellent growth reduction of E. coli (99.94–99.99%) and S. aureus (99.55–99.99%). The electrospun nylon 6 nanofiber composites could be used twice before a decrease in antibacterial activity was observed. The study showed that electrospun nylon 6 nanofiber composites possess a potential for use to control pathogens in water.     

Electrospun nylon 6 nanofibers incorporated with 2‐substituted N‐alkylimidazoles and their silver(I) complexes for antibacterial applications

The article presents the incorporation of biocides [2‐substituted N‐alkylimidazoles and their silver(I) complexes] into electrospun nylon 6 nanofibers for application as antimicrobial materials. The electrospun nylon 6/biocides nanofiber composites were characterized by IR spectroscopy (ATR‐FTIR) and scanning electron microscopy (SEM‐EDX). The antimicrobial activity of the electrospun nylon 6/biocides nanofiber composites was evaluated against Escherichia coli, Staphylococcus aureus, and Bacillus subtilis subsp. spizizenii using the disk diffusion method, the American Association for Textile Chemists and Colorists test method 100‐2004 and the dynamic shake flask method (American Society for Testing and Materials E2149‐10). The electrospun nylon 6 nanofibers incorporated with 2‐substituted N‐alkylimidazoles displayed moderate to excellent levels of growth reduction against S. aureus (73.2–99.8%). For the electrospun nylon 6 nanofibers incorporated with silver(I) complexes, the levels of growth reduction were >99.99%, for both E. coli and S. aureus, after the antimicrobial activity evaluation using the shake flask method. The study demonstrated that the electrospun nanofibers, fabricated using the incorporation strategy, have the potential to be used as attractive antimicrobial materials. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39783.     

Preparation and properties of antibacterial,biocompatible core–shell fibers produced by coaxial electrospinning

Coaxial electrospinning is a method for producing fibrous mats with optional features, such as antibacterial properties, controllable release, and hydrophobicity based on shell materials. Because these features are important in biomedical applications, in this study, biocompatible hydrophobic polymer (polycaprolactone) and hydrophilic polymer [poly(vinyl alcohol)] with silver nanoparticles loaded in the core solution were coaxially electrospun. The effect of silver addition on the conductivity and viscosity of the solutions, chemical structure of the fiber mats, mechanical properties, porosity, hydrophobicity, water vapor transmission rate (WVTR), silver release, and antibacterial properties were investigated. Fibers with silver exhibited less porosity and a lower WVTR and a greater contact angle than the fibers without silver. Furthermore, the core–shell fibers reduced the burst release of silver and successfully prevented the growth of Escherichia coli and Staphylococcus aureus bacteria. Therefore, it seems that these fibers are suitable for providing electrospun mats with long‐term antibacterial properties. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44979.     

Silver nanoparticle incorporated poly(l‐lactide‐co‐glycolide) nanofibers: Evaluation of their biocompatibility and antibacterial properties

The objective of this work is the fabrication of poly(l ‐lactide‐co‐glycolide) or PLGA (with LA/GA ratios of 50/50 and 75/25) nanofibers containing silver nanoparticles (AgNPs) by the method of electrospinning. The incorporation of AgNPs in PLGA was carried out in three different concentrations (1, 3, 6 w/w %).The electrospun nanofibers were evaluated for their morphology by scanning electron microscopy and their fiber diameters ranged between 487 and 781 nm. Integration of AgNPs within the fibers was verified by spectroscopy studies, while the mechanical properties of the developed fibers were found comparable to the mechanical properties of the human skin. Proliferation of human dermal fibroblasts (HDF) demonstrated minimal cytotoxicity on fibers containing 1 wt % and 3 wt % of AgNPs, while 6 wt % of AgNPs inhibited cell proliferation. Antimicrobial activity was studied using three different strains of Gram‐positive and Gram‐negative bacteria. Results of the HDF proliferation and antimicrobial studies showed that the electrospun PLGA75/25 containing 3 wt % AgNP can function as a suitable substrate for wound dressing, compared to the other scaffolds of this study. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42686.     

Preparation of antibacterial temperature‐sensitive silver‐nanocomposite hydrogels from N‐isopropylacrylamide with green tea

This article reports the temperature‐sensitive, green tea (GT)‐based silver‐nanocomposite hydrogels for bacterial growth inactivation. The temperature‐sensitive hydrogels were prepared via free‐radical polymerization using temperature‐sensitive N‐isopropylacrylamide (NIPAM) monomer with GT as the hydrogel matrix. The nanocomposite hydrogels were encapsulated with silver ions via swelling method, which was later reduced to silver nanoparticles using Azadirachta indica leaf extract. The temperature‐sensitive silver nanocomposite hydrogels were analyzed by using Fourier transforms infrared, UV–visible spectroscopy, differential scanning calorimetry–thermogravimetric analysis, X‐ray diffraction, scanning electron microscopy, and transmission electron microscopy. The prepared hydrogels exhibited higher phase volume transition temperature than the NIPAM. The inhibition zone study of the inactivation of bacteria on the developed hydrogels was carried out against Gram negative (Escherichia coli) and Gram positive (Staphylococcus aureus), which revealed that the prepared hydrogels are helpful for the inactivation of these bacteria due to the high stabilization of antibacterial properties of the silver nanoparticles. The developed hydrogels are promising for biomedical applications. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45739.     

Preparation of grafted cationic polymer/silver chloride modified cellulose fibers and their antibacterial properties

In this article, we present a simple method for synthesizing antibacterial cellulose fibers that were modified with a cationic polymer and immobilized silver chloride (AgCl) particles. Relatively simple techniques of graft polymerization and onsite precipitation were used to fabricate the composites. Scanning electron microscopy images, Fourier transform infrared spectroscopy, X‐ray diffraction, thermogravimetric analysis, and energy‐dispersive X‐ray spectroscopy confirmed the immobilization of the AgCl particles. The observed inhibition zone of the immobilized AgCl particle composites indicated that the biocidal silver ions were released from the composites in aqueous solution. Compared with cationic‐polymer‐grafted cellulose fibers or AgCl alone, the cationic polymer/AgCl composites showed excellent antibacterial activity against Gram‐negative Escherichia coli and Gram‐positive Staphylococcus aureus. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42092.     

Preparation and characterization of electrospun polyurethane/inorganic‐particles nanofibers

To develop a novel functional fibrous scaffold, a blend‐electrospinning technique was applied to transfer polyurethane/inorganic‐particles solutions into nanofibers, in which titanium dioxide, copper, or/and silver nanoparticles were used. The resultant nanofibers were subsequently characterized by means of scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, and tensile mechanical test. Furthermore, the structural change and the thermal properties of the electrospun fabrics were examined by X‐ray diffraction and differential scanning calorimetry, respectively. Antibacterial performance of the resulting nanofibrous mats on Escherichia coli and Staphylococcus aureus was also measured. Experimental results have shown that when the ratio of polyurethane solution and titanium dioxide sol was in 3.5:1, 89.55% of the Escherichia coli and 82.35% of the Staphylococcus aureus bacteria were killed under a UV‐light activation. However, the introduction of silver or/and cuprum nanoparticles into the polyurethane/TiO₂ (in the ratio of 3.5:1) nanofibers led to a significant improvement in their antibacterial ability without any photocatalysis.POLYM. COMPOS., 33:2045–2057, 2012. © 2012 Society of Plastics Engineers     

Preparation and characterization of cotton fibers coated with AA-IA hydrogel containing silver/graphene or graphene oxide nanoparticles

This study presents the fabrication and characterization of cotton textile fibers coated with hydrogels containing silver and Graphene or Graphene Oxide nanoparticles using 1-hexyl-3-methyl-imidazolium (HMIMPF6) ionic liquid (IL) as carbon filler dispersant. Acrylic acid/Itaconic acid (AA-IA) hydrogels are synthesized by polymerizing an acrylic acid-itaconic acid aqueous (80/20 v/v) solution and mixed with 2-2-Azobis (2-methylpropionamide) diclorohydrate, and N,N´-methylenbis (acrylamide). Then silver nanoparticles are generated throughout the hydrogel networks using in situ method by incorporating the silver ions and subsequent reduction with sodium borohydride. Then a cotton textile fiber substrate was coated with this hydrogel. Finally, graphene or graphene oxide was added to the textile substrate already impregnated with hydrogel and silver nanoparticles. In order to favor the dispersion of the carbon nano-structures in the system, an IL was used. The influence of these nanocomposite hydrogels on the properties of textile fiber were investigated by infrared spectroscopy (ATR), scanning electron microscopy (SEM), inductively coupled plasma mass spectroscopy (ICP) and antibacterial tests against Staphylococcus aureus (Gram positive) and Escherichia coli (Gram negative). The effect of each and combined fillers dispersion on antimicrobial properties were determined. Cotton fibers coated with hydrogel containing silver nanoparticles and graphene showed better results when the ionic liquid was used. Graphene showed greater antimicrobial efficiency than graphene oxide. It was proved that the textiles coated with hydrogels containing these fillers had an excellent antibacterial ability and are a good option to be used for medical applications such as wounds and burns dressing.     

Antibacterial properties of raw and degummed silk with nanosilver in various conditions

This article is concerned with the effects of nanosized silver colloids on the antibacterial properties of silk fibers against two kinds of bacteria: Staphylococcus aureus and Escherichia coli. Different concentrations of silver nanoparticles (Ag NPs; 10, 25, 50, and 100 ppm) were applied to silk fibers by an exhaust method. The effect of medium pH on the Ag NP uptake on the fibers was studied. Also, sodium carbonate and sodium chloride were added to the liquor as auxiliaries. Scanning electron microscopy was used to observe the morphology of the silk fibers. The antibacterial activity was examined by a bacterial counting method. Energy‐dispersive X‐ray spectroscopy was also used to show the elements on the surface of the silk fibers. We observed that the antibacterial activity increased with silver treatment. It also increased with decreasing pH, especially for the raw silk. The use of NaCl improved the uniformity of the Ag NPs on the fiber surface and increased the antibacterial activities. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation and characterization of acrylic acid/itaconic acid hydrogel coatings containing silver nanoparticles

Hydrogel silver nanocomposites have been used in applications with excellent antibacterial performance. Acrylic acid (AA)/itaconic acid (IA) hydrogels silver nanocomposites were prepared and applied as a coating on a textile substrate. Hydrogel matrices were synthesized first by the polymerization of an AA/IA aqueous (80/20 v/v) solution and mixed with 2‐2‐azobis(2‐methylpropionamide) diclorohydrate and N,N′‐methylene bisacrylamide until the hydrogel was formed. Silver nanoparticles were generated throughout the hydrogel networks with an in situ method via the incorporation of the silver ions and subsequent reduction with sodium borohydride. Cotton (C) and cotton/polyester (CP) textile fibers were then coated with these hydrogel silver nanocomposites. The influence of these nanocomposite hydrogels on the properties of the textile fiber were investigated by infrared spectroscopy (attenuated total reflectance), scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, and antibacterial tests against Pseudomona aeruginosa and Staphylococcus aureus. The better conditions, in which no serious aggregation of the silver nanoparticles occurred, were determined. It was proven that the textiles coated with hydrogels containing nanosilver had an excellent antibacterial abilities. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 2713–2721, 2013     

Studies on the synthesis of electrospun PAN‐Ag composite nanofibers for antibacterial application

We have successfully synthesized polyacrylonitrile (PAN) nanofibers impregnated with Ag nanoparticles by electrospinning method at room temperature. Briefly, the PAN‐Ag composite nanofibers were prepared by electrospinning PAN (10% w/v) in dimethyl formamide (DMF) solvent containing silver nitrate (AgNO₃) in the amounts of 8% by weight of PAN. The silver ions were reduced into silver particles in three different methods i.e., by refluxing the solution before electrospinning, treating with sodium borohydride (NaBH₄), as reducing agent, and heating the prepared composite nanofibers at 160°C. The prepared PAN nanofibers functionalized with Ag nanoparticles were characterized by field emission scanning electron microscopy (FESEM), SEM elemental detection X‐ray analysis (SEM‐EDAX), transmission electron microscopy (TEM), and ultraviolet‐visible spectroscopy (UV‐VIS) analytical techniques. UV‐VIS spectra analysis showed distinct absorption band at 410 nm, suggesting the formation of Ag nanoparticles. TEM micrographs confirmed homogeneous dispersion of Ag nanoparticles on the surface of PAN nanofibers, and particle diameter was found to be 5–15 nm. It was found that all the three electrospun PAN‐Ag composite nanofibers showed strong antibacterial activity toward both gram positive and gram negative bacteria. However, the antibacterial activity of PAN‐Ag composite nanofibers membrane prepared by refluxed method was most prominent against S. aureus bacteria. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Preparation of nylon-6/chitosan composites by nanospider technology and their use as candidate for antibacterial agents

Electrospun nylon-6/chitosan (nylon-6/Ch) nanofibers were prepared by nanospider technology. Quaternary ammonium salts as antibacterial agent were immobilized onto electrospun nylon-6/Ch nanofibers via surface modification by soaking the mat in aqueous solution of glycidyltrimethylammonium chloride (GTMAC) at room temperature overnight to give nylon-6/N-[(2-hydroxy-3-trimethylammonium)propyl] chitosan chloride (nylon-6/HTCC). The morphological, structural and thermal properties of the nylon-6/ch nanofibers were studied by field-emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), Fourier transform-infrared (FT-IR) spectroscopy, and thermogravimetric analysis (TGA). Biological screening has demonstrated the antibacterial activity of the electrospun nanofibers against Gram negative bacteria, Escherichia coli 35218, and Pseudomonas aeruginosa and Gram positive bacteria, Staphylococcus aureus 24213 among the tested microbes. Thus, the study ascertains the value of the use of electrospun nanofibers, which could be of considerable interest to the development of new antibacterial materials for biomedical applications.     

Study of Antibacterial Activity of Metal Nanoparticle Absorbed Fly‐Ash based Ceramics

The bactericidal action of silver nanoparticles has been observed by many researchers since few years. In this study, we have developed an antibacterial ceramics (ACs) by absorbing synthesized silver nanoparticles within the ceramic matrix developed by us from an abundantly available coal fly ash, an extremely hazardous by‐product of thermal power plants. Nanoparticles dispersions of different particle sizes were made absorbed in to the ceramic matrix to evaluate its bactericidal activity against both Staphylococcus aureus (Gram‐positive) and Escherichia coli (Gram‐negative) bacteria, taken as the model microorganisms. This study showed that the total bactericidal action of ACs depends on the size of absorbed nanoparticles and the content of nanoparticles in the dispersions within the ceramic matrix. ACs thus developed release very slowly a minute amount of nanoparticles and show strong and prolonged bactericidal activity against pathogenic strain of both types of bacteria. The concentration of prepared nanoparticles in dispersion and the concentration of released nanoparticles in aqueous medium from the absorbed ceramic matrix were measured using inductively coupled plasma spectrophotometer. The mechanism of the antibacterial action was also studied using transmission electron microscopy image analysis of the bacterial cross‐section of both types of bacteria.     

In situ preparation,electrospinning, and characterization of polyacrylonitrile nanofibers containing silver nanoparticles

Silver nanoparticles were prepared from a polyacrylonitrile (PAN)/N,N‐dimethylformamide solution of silver nitrate (0.05–0.5 wt %) with light treatment (xenon arc) to reduce Ag⁺ ions into Ag⁰. The formation of silver nanoparticles in the PAN solution and the effect of treatment time on the numbers of silver nanoparticles, their average diameter and size distribution were investigated by UV–visible spectroscopy. In addition, the average size of silver nanoparticles and their shapes in colloidal solution were determined by transmission electron microscopy images and found to be on the order of 10 nm. The resulting solution was electrospun into PAN nanofibers. An increase in the salt concentration led to decreases in the nanofiber diameter and bead numbers (determined by scanning electron microscopy images) and an increase in the crystallinity (confirmed by X‐ray diffraction patterns). A continuous rate of silver release from the nanofiber web was monitored by the atomic absorption technique. These nanofibers showed strong antibacterial activity against Pseudomonas aeruginosa. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Multifunctionality of poly(vinyl alcohol) nanofiber webs containing titanium dioxide

We prepared titanium dioxide/PVA nanocomposite fiber webs for application in multifunctional textiles by electrospinning. The morphological properties of the TiO₂/PVA nanocomposite fibers were characterized using scanning electron microscopy and transmission electron microscopy. Layered fabric systems with electrospun TiO₂ nanocomposite fiber webs were developed using various concentrations of TiO₂ and a range of web area densities, and then the UV‐protective properties, antibacterial functions, formaldehyde decomposition ability, and ammonia deodorization efficiency of the fabric systems were assessed. Layered fabric systems with TiO₂ nanocomposite fiber webs containing 2 wt% TiO₂ nanoparticles at 3.0 g m^?2 web area density exhibited an ultraviolet protection factor of greater than 50, indicating excellent UV protection. The same system showed a 99.3% reduction in Staphylococcus aureus. Layered fabric systems with TiO₂ nanocomposite fiber webs containing 3 wt % TiO₂ nanoparticles at 3.0 g m^?2 web area density exhibited a 85.3% reduction in Klebsiella pneumoniae. Titanium dioxide nanocomposite fiber webs containing 3 wt % TiO₂ nanoparticles at 3.0 g m^?2 web area density exhibited a formaldehyde decomposition efficiency of 40% after 2 h, 60% after 4 h, and 80% after 15 h under UV irradiation. The same system showed an ammonia deodorization efficiency of 32.2% under UV irradiation for 2 h. These results demonstrate that TiO₂ nanocomposite fibers can be used to produce advanced textile materials with multifunctional properties. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Simultaneous antimicrobial and dyeing of wool: A facial method

This study is carried out to examine the effects of simultaneous dyeing and antimicrobial finishing of wool yarns. Wool yarns were dyed with acid dye along with colloidal silver nanoparticles through the exhaustion method in a one‐bath. Different concentrations of nanosilver were examined to evaluate its influences on the color and the antibacterial properties of the yarns. The antibacterial property of the sample has been tested by a Gram‐negative bacterium Escherichia coli and a Gram‐positive bacterium Staphylococcus aureus. Also, the tenacity of wool yarns, color, and rubbing fastness of the dyed yarns has been measured. The color fastness against washing and antibacterial property of the dyed yarns after 10 laundering cycles was also considered. The fiber morphology was studied by SEM pattern, EDX, and X‐ray diffractometer. The results showed that the wool yarns dyed with acid dye along with 25 ppm of silver nanoparticles exhibited a very good antimicrobial effect even after 10 laundering cycles on S. aureus while the rubbing fastness remained unchanged, and the color fastness and tenacity were even improved. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011