Poly(vinyl acetate)/polyacrylate semi‐interpenetrating polymer networks. II. Thermal,mechanical, and morphological characterization

The thermal, dynamic mechanical, and mechanical properties and morphology of two series of semi‐interpenetrating polymer networks (s‐IPNs) based on linear poly(vinyl acetate) (PVAc) and a crosslinked n‐butyl acrylate/1,6‐hexanediol diacrylate copolymer were investigated. The s‐IPN composition was varied with different monoacrylate/diacrylate monomer ratios and PVAc concentrations. The crosslinking density deeply affected the thermal behavior. The results showed that a more densely crosslinked acrylate network promoted phase mixing and a more homogeneous structure. The variation in the linear polymer concentration influenced both the morphology and mechanical properties. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Swelling behavior of semi‐interpenetrating polymer network hydrogels composed of poly(vinyl alcohol) and poly(acrylamide‐co‐sodium methacrylate)

Interpenetrating polymer network (IPN) hydrogels based on poly(vinyl alcohol) (PVA) and poly(acrylamide‐co‐sodium methacrylate) poly(AAm‐co‐SMA) were prepared by the semi IPN method. These IPN hydrogels were prepared by polymerizing aqueous solution of acrylamide and sodium methacrylate, using ammonium persulphate/N,N,N¹,N¹‐tetramethylethylenediamine (APS/TMEDA) initiating system and N,N¹‐methylene‐bisacrylamide (MBA) as a crosslinker in the presence of a host polymer, poly(vinyl alcohol). The influence of reaction conditions, such as the concentration of PVA, sodium methacrylate, crosslinker, initiator, and reaction temperature, on the swelling behavior of these IPNs was investigated in detail. The results showed that the IPN hydrogels exhibited different swelling behavior as the reaction conditions varied. To verify the structural difference in the IPN hydrogels, scanning electron microscopy (SEM) was used to identify the morphological changes in the IPN as the concentration of crosslinker varied. In addition to MBA, two other crosslinkers were also employed in the preparation of IPNs to illustrate the difference in their swelling phenomena. The swelling kinetics, equilibrium water content, and water transport mechanism of all the IPN hydrogels were investigated. IPN hydrogels being ionic in nature, the swelling behavior was significantly affected by environmental conditions, such as temperature, ionic strength, and pH of the swelling medium. Further, their swelling behavior was also examined in different physiological bio‐fluids. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 302–314, 2005     

p(AAm/TA)‐based IPN hydrogel films with antimicrobial and antioxidant properties for biomedical applications

Interpenetrating polymer networks (IPN), either semi‐IPN (s‐IPN) or full IPN, based on a natural polymer tannic acid (TA) and synthetic poly(acrylamide) (p(AAm)) were prepared by incorporation of TA during p(AAm) hydrogel film preparation with and without crosslinking of TA simultaneously. The synthesis of p(AAm/TA) s‐IPN and IPN hydrogels with different amounts of TA were prepared by concurrent use of redox polymerization and epoxy crosslinking. The p(AAm)‐based hydrogels were completely degraded at 37.5°C within 9 and 2 days at pHs 7.4 and 9, respectively. Biocompatibility of p(AAm), s‐IPN, and IPN were tested with WST assay and double staining, they had 75% cell viability up to almost 20 μg mL^?1 concentration against L929 fibroblast cell. Antioxidant properties of IPN and s‐IPN hydrogels were investigated with FC and ABTS^? methods. Antimicrobial properties of TA‐containing s‐IPN, and IPN hydrogels were determined against three common bacterial strains, Escherichia coli ATCC 8739, Staphylococcus aureus ATCC 6538, and Bacillus subtilis ATCC 6633, and it was found that p(AAm/TA)‐based s‐IPN and IPN hydrogels are effective antimicrobial and antioxidant materials. Moreover, almost up to day‐long linear TA release profiles were obtained from IPN and s‐IPN hydrogels in phosphate buffer solution at pH 7.4 at 37.5°C. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41876.     

Kinetic study on epoxy bisphenol‐A diacrylate IPN formation

Interpenetrating polymer networks (IPN) based on diglycidyl ether of bisphenol‐A (DGEBA) and bishenol‐A diacrylate (BADA) in weight ratios of 100/0, 50/50, and 0/100 were blended and were cured simultaneously by using benzoyl peroxide (BPO) and 4,4′‐methylenedianiline (MDA) as curing agents. Kinetic study during IPN formation was carried out at 65, 70, 75 and 80 °C. Absorbance changes at 1623.3 cm⁻¹ and 914 cm⁻¹ relating to concentration changes of CC and epoxide were monitored with Fourier‐transform infrared spectroscopy (FTIR). The epoxide cure kinetic data revealed a combination of non‐catalytic bimolecular reaction and a catalyzed termolecular reaction, while the CC cure kinetic data fitted a first‐order reaction. The calculated kinetic parameters indicated decreased rate constants and increased activation energies of the IPN compared with those of the individual components. Presumably, chain entanglements between the two networks provide a sterically hindered environment for the cure reactions and vitrification restrains the chain mobility, accounting for the kinetic parameters. © 1999 Society of Chemical Industry     

Shape memory properties and unusual optical behaviour of an interpenetrating network of poly(ethylene oxide) and poly(2‐hydroxyethyl methacrylate)

An interpenetrating polymer network (IPN) with shape memory properties was prepared by using poly(2‐hydroxyethyl methacrylate) (PHEMA) and poly(ethylene oxide) (PEO). PHEMA acts as a fixed phase and PEO as a switching phase. The switching action of PEO is due to the reversible process of melting and crystallization. It was observed that the shape recovery of the IPN increases with increasing crosslinker concentration up to an optimum value and decreases thereafter. In addition to the shape memory property, the IPNs show a reversible change in optical properties from translucent to opaque. The change in optical properties is quite different from that observed in a semicrystalline polymer system where the transparency increases as a result of the melting of crystals. This behaviour of the IPN is explained in terms of H‐bonding of PEO with PHEMA. Fourier transform infrared spectroscopy was used to study the H‐bonding between PEO and PHEMA. © 2019 Society of Chemical Industry     

Preparation and characterization of a positive thermoresponsive hydrogel for drug loading and release

A positive thermoresponsive hydrogel composed of poly(acrylic acid)‐graft‐β‐cyclodextrin (PAAc‐g‐β‐CD) and polyacrylamide (PAAm) was synthesized with the sequential interpenetrating polymer network (IPN) method for the purpose of improving its loading and release of drugs. The structure and properties of the PAAc‐g‐β‐CD/PAAm hydrogel (IPN hydrogel) were characterized with Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), and swelling measurements. FTIR studies showed that the IPN hydrogel was primarily composed of an IPN of PAAc‐g‐β‐CD and PAAm. The data from DSC and swelling measurements indicated that the phase‐transition temperature or upper critical solution temperature (UCST) of the IPN hydrogel was approximately 35°C. Through the measurement of the temperature dependence of the swelling, increases in the UCST and non‐sensitivity to changes in the salt concentration were observed for the IPN hydrogel versus the normal IPN hydrogel poly(acrylic acid)/PAAm (without β‐cyclodextrin). Furthermore, the swelling/deswelling kinetics of the IPN hydrogel also exhibited an improved controllable response rate versus the normal IPN hydrogel. Ibuprofen (IBU) was chosen as the model drug for examining loading and release from the IPN hydrogel. The experimental data proved that the IPN hydrogel provided a positive drug release pattern; the IBU released faster at 37°C than at 25°C, and improved drug loading and controlled release were achieved by the IPN hydrogel versus the normal IPN hydrogel. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Insolubilization of sodium chondroitin sulfate by forming a semi‐interpenetrating polymer network with acrylic acid: A potential carrier for colon‐specific drug delivery

To reduce the highly hydrophilic property of chondroitin sulfate (ChS), a semi‐interpenetrating polymer network (semi‐IPN) of chondroitin sulfate/polyacrylic acid (PAA) was prepared as a drug carrier by crosslinking acrylic acid with diethyleneglycol diacrylate. The swelling properties of the semi‐IPNs with different concentrations of crosslinking agent were correlated. The moisture sorption profiles were evaluated using differential thermal analysis. Ketoprofen was used as a drug probe to evaluate the performance of the drug released from the semi‐IPN matrices. The prepared semi‐IPNs demonstrated significant swelling reduction properties with both gastric and intestinal fluids compared with those of both the pure ChS and the ChSAA blend without the crosslinking agent. The amount of accumulated drug released from the semi‐IPNs was less than 30 wt % at pH 1.2 and up to 80 wt % at pH 7.4. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 114–122, 2002     

Structure–property relationships in acrylate/epoxy interpenetrating polymer networks: Effects of the reaction sequence and composition

Interpenetrating polymer networks (IPNs) of poly(ethylene glycol) 200 diacrylate and diglycidyl ether of bisphenol A were formed over a range of compositions and with different reaction sequences. We controlled the reaction sequence by thermally initiating the cationic epoxy polymerization, photoinitiating the free‐radical acrylate polymerization, and changing the processing order. The reaction was monitored by attenuated total reflectance Fourier transform infrared spectroscopy, photo differential scanning calorimetry. and modulated differential scanning calorimetry (mDSC). The glass‐transition temperature was estimated from mDSC. Mechanical and rheological tests provided the strength and hardness of the materials. Morphology and phase separation were explored with optical and scanning electron microscopy. All of the physical properties were dependent on IPN composition. Some properties and the morphology were dependent on the reaction sequence. Significant differences in glass‐transition temperature were observed at the same composition but with different reaction sequences. Even with minimal structure, correlations existed between the morphology and material properties with partially phase‐separated samples exhibiting maximum damping. The rapid reaction allowed minimal phase separation, yet different reaction sequences resulted in significantly different properties. This systematic study indicated that the relationships between phase morphology, processing, and the physical properties of IPNs are complex and not predictable a priori. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 891–901, 2007     

Ionic conductivity and morphology of semi‐interpenetrating‐type polymer electrolyte entrapping poly(siloxane‐g‐allyl cyanide)

We prepared a semi‐IPN (interpenetrating network)‐type solid polymer electrolyte (SPE) using poly (ethylene glycol)dimethacrylate (PEGDMA) as a polymer matrix containing a monocomb‐type poly(siloxane‐g‐allyl cyanide) and poly(ethylene glycol)dimethylether (PEGDME) for the lithium secondary battery. The poly(siloxane‐g‐allyl cyanide)s were prepared by a hydrosilation reaction of poly (methyl hydrosiloxane) with allyl cyanide and characterized by ¹H NMR and FTIR. The semi‐IPN‐type electrolyte was prepared by thermal curing, and conductivities of samples were measured by impedance spectroscopy using an indium tin oxide (ITO) electrode. The ionic conductivity of the semi‐IPN‐polymer electrolyte was about 1.05 × 10^?5 S cm^?1 with 60 wt % of the poly(siloxane‐g‐allyl cyanide) and 6.96 × 10^?4 S cm^?1 with 50 wt % of the PEGDME and 10 wt % of the poly(siloxane‐g‐allyl cyanide) at 30°C. The SEM morphology of the cross section of the semi‐IPN‐polymer electrolyte film was changed from discontinuous network to continuous network as increasing the PEGDME content and decreasing the poly(siloxane‐g‐allyl cyanide) content. The mechanical stability was also enhanced when increasing the PEGDME content. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Preparation and characterization of thermosensitive poly(N‐isopropylacrylamide)/poly(ethylene oxide) semi‐interpenetrating polymer networks

Temperature‐sensitive poly(N‐isopropylacrylamide) hydrogels were successfully synthesized by using poly(ethylene oxide) as the interpenetrating agent. The newly prepared semi‐interpenetrating polymer network (semi‐IPN) hydrogels exhibited much better properties as temperature‐sensitive polymers than they did in the past. Characterizations of the IPN hydrogels were investigated using a swelling experiment, FTIR spectroscopy, and differential scanning calorimetry (DSC). Semi‐IPN hydrogels exhibited a relatively high temperature dependent swelling ratio in the range of 23–28 at room temperature. DSC was used for the determination of the lower critical solution temperature of the semi‐IPN hydrogel. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3032–3036, 2003     

pH/temperature‐responsive semi‐IPN hydrogels composed of alginate and poly(N‐isopropylacrylamide)

Amino semitelechelic poly(N‐isopropylacrylamide) (PNIPAAm) was prepared by radical polymerization with aminoethanethiol hydrochloride as a chain‐transfer agent. Semi‐interpenetrating polymer network (semi‐IPN) hydrogels, composed of alginate and amine‐terminated PNIPAAm, were prepared by crosslinking with calcium chloride. From the swelling behaviors of semi‐IPNs at various pH's and Fourier transform infrared spectra at high temperatures, the formation of a polyelectrolyte complex was confirmed from the reaction between carboxyl groups in alginate and amino groups in modified PNIPAAm. Semi‐IPN hydrogels reached an equilibrium swelling state within 24 h. The water state in hydrogels, investigated by differential scanning calorimetry, showed that sample CAN55 [alginate/PNIPAAm (w/w) = 50/50] exhibited the lowest equilibrium water content and free water content among the hydrogels tested, which was attributed to its more compact structure compared to other samples and the high content of interchain bonding within the hydrogels. Alginate/PNIPAAm semi‐IPN hydrogels exhibited a reasonable sensitivity to the temperature, pH, and ionic strength of swelling medium. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1128–1139, 2002     

Curing and mechanical properties of dicyanate/poly(ether sulfone) semi‐interpenetrating polymer networks

Semi‐interpenetrating polymer networks (semi‐IPNs) composed of a dicyanate resin and a poly(ether sulfone) (PES) were prepared, and their curing behavior and mechanical properties were investigated. The curing behavior of the dicyanate/PES semi‐IPN systems catalyzed by an organic metal salt was analyzed. Differential scanning calorimetry was used to study the curing behavior of the semi‐IPN systems. The curing rate of the semi‐IPN systems decreased as the PES content increased. An autocatalytic reaction mechanism was used to analyze the curing reaction of the semi‐IPN systems. The glass‐transition temperature of the semi‐IPNs decreased with increasing PES content. The thermal decomposition behavior of the semi‐IPNs was investigated. The morphology of the semi‐IPNs was investigated with scanning electron microscopy. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1079–1084, 2003     

Synthesis and properties of the semi‐interpenetrating polymer network–like,thermosensitive poly(N‐isopropylacrylamide) hydrogel

A new strategy was used to prepare a semi‐interpenetrating polymer network (semi‐IPN)–like poly(N‐isopropylacrylamide) (PNIPAAm) polymeric hydrogel, consisting of either low (2300) or high (33,000) molecular weight linear PNIPAAm chains and the crosslinked PNIPAAm network. The properties of the resulting PNIPAAm hydrogels were characterized by DSC and SEM as well as their swelling ratios at various temperatures, the deswelling in hot water (48°C), and the oscillating shrinking–swelling properties within small temperature cycles. It was found that the deswelling rate of these semi‐IPN–like PNIPAAm hydrogels was improved if the molecular weight and/or composition of the linear PNIPAAm chains within the semi‐IPN–like PNIPAAm hydrogels were increased. This improved deswelling rate was attributed to the fast response nature of the linear PNIPAAm chains and the increased pore number in the matrix network, which provided numerous water channels for the water to diffuse out during the deswelling process at a temperature above the lower critical solution temperature. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1935–1941, 2003     

PU/EP/PPGDA三元IPN弹性体的结构研究

用红外光谱 (IR)、扫描电子显微镜 (SEM )、X光电子能谱 (XPS)研究了以聚氨酯 (PU)为第一网络的三元IPN聚氨酯 /环氧树酯 /聚丙二醇二丙烯酸酯 (IPNPU/EP/PPGDA)弹性体的互穿特性和形态结构。研究结果表明 ,各元素在三元IPN表面和内部分布不一致 ,表明三种聚合物在IPN中的分布是不均匀的 ,这种差异与IPN组成、组成聚合物间的相容性以及形态结构有密切联系     

Preparation and characterization of nanostructured and high transparent hydrogel films with pH sensitivity and application

Novel nanostructured, high transparent, and pH sensitive poly(2‐hydroxyethyl methacrylate‐co‐methacryliac acid)/poly(vinyl alcohol) (P(HEMA‐co‐MA)/PVA) interpenetrating polymer network (IPN) hydrogel films were prepared by precipitation copolymerization of aqueous phase and sequential IPN technology. The first P(HEMA‐co‐MA) network was synthesized in aqueous solution of PVA, then followed by aldol condensation reaction, it formed multiple IPN nanostructured hydrogel film. The film samples were characterized by IR, SEM, DSC, and UV‐vis spectrum. The transmittance arrived at 93%. Swelling and deswelling behaviors showed the multiple IPN nanostuctured film had rapid response. The mechanical properties of all the IPN films improved than that of PVA film. Using crystal violet as a model drug, the release behaviors of the films were studied. The results showed that compared with PVA, which had low drug loading and exhibited high and burst release, the three IPN films had high drug loading and exhibited sustained release. Besides, the release followed different release mechanism at pH = 4.0 and pH = 7.4, respectively. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Computer simulation method for calculating concentration profiles in polyurethane/polystyrene interpenetrating polymer network membranes

Interpenetrating polymer networks (IPNs) of polyurethane (PU) and polystyrene (PS; 90/10 and 75/25) were synthesized by the condensation reaction of castor oil with methylene diisocyanate and styrene, with benzoyl peroxide as an initiator. The IPN membranes were characterized for physicomechanical, optical, and X‐ray diffraction properties. Computer‐simulated concentration profiles of aqueous salt solutions through PU/PS IPN membranes were generated with Fick's second‐order differential equation, and the results were examined in terms of diffusion anomalies. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 122–128, 2003     

Interpenetrating polymeric network hydrogels for potential gastrointestinal drug release

New interpenetrating polymeric network (IPN) hydrogels based on chitosan (C), poly(N‐vinyl pyrrolidone) (PVP) and poly(acrylic acid) (PAAc), crosslinked with glutaraldehyde (G) and N,N‘‐methylenebisacrylamide (MBA), were prepared and investigated for potential gastrointestinal drug delivery vehicles utilizing a model drug, amoxicillin. IPN hydrogels were synthesized by simultaneous polymerization/crosslinking of acrylic acid monomer in the presence of another polymer (C) and crosslinker (G, MBA). Three different concentrations of glutaraldehyde were used (0.5, 1.0 and 2.0 w/w) to control the overall porosity of the hydrogels, named C‐P‐AAc/0.5, C‐P‐AAc/1.0 and C‐P‐AAc/2.0, respectively. Spectroscopic and thermal analyses such as Fourier transform infrared spectroscopy, thermogravimetric analysis and thermomechanical analysis were performed for IPN characterization. Equilibrium swelling studies were conducted for pH and temperature response behavior. Swelling studies were also carried out in simulated gastric fluid of pH = 1.1 and simulated intestinal fluid of pH = 7.4 to investigate possible site‐specific drug delivery. It was found that the release behavior of the drug from these IPN hydrogels was dependent on the pH of the medium and the proportion of crosslinker in the IPN. It was observed that amoxicillin release at pH = 7.4 was higher than at pH = 1.1. The analysis of the drug release showed that amoxicillin was released from these hydrogels through a non‐Fickian diffusion mechanism. Copyright © 2007 Society of Chemical Industry     

Preparations and properties of thermosensitive terpolymers of N‐isopropylacrylamide,sodium 2‐acrylamido‐2‐methyl‐propanesuphonate,and N‐tert‐butylacrylamide

Terpolymers based on N‐isopropylacrylamide, sodium 2‐acrylamido‐2‐methyl‐propanesulfonate, and N‐tert‐butylacrylamide were synthesized by free‐radical copolymerization with 2,2′‐azobisisobutyronitrile as an initiator. The lower critical solution temperatures (LCSTs) of the linear polymer aqueous solutions were determined by the measurement of the transmittance on UV at different temperatures. The influence of the polymer concentration, polymer composition, and ionic strength on the LCSTs of the linear polymers was investigated. The LCST decreased with increases in the hydrophobic monomer N‐tert‐butylacrylamide, polymer concentration, and ionic strength. The phase transition became sharp when the polymer concentration and ionic strength increased. Meanwhile, the crosslinked hydrogels were prepared with the same recipe used for the linear terpolymers, but a crosslinker was added to the reaction system. The swelling ratios of the hydrogels at various temperatures and salt solutions were determined. The hydrogels possessed both high swelling ratios and thermosensitivity. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

PDMS/PVDF microporous membrane with semi‐interpenetrating polymer networks for vacuum membrane distillation

In this article, using the non‐solvent induced phase separation process, a new microporous membrane with the semi‐interpenetrating polymer network (semi‐IPN) structure was produced. For this membrane, polydimethylsiloxane (PDMS) polymer is crosslinking and poly(vinylidene fluoride) (PVDF) polymer is linear, by changing the mass ratio of PDMS/PVDF, the structure and the performance of the prepared membranes were studied. The membranes were also investigated by attenuated total reflection‐Fourier transform infrared (ATR‐FTIR), scanning electron microscopy–energy‐dispersive X‐ray spectroscopy, X‐ray diffraction, thermogravimetric analysis, and water contact angle, etc. ATR‐FTIR spectroscopy confirmed the formation of semi‐IPN; compared with the PDMS/PVDF polymer without semi‐IPNs structure, the viscosity of the semi‐IPNs structured casting solution increased, membrane mechanical property increased but its hydrophobicity decreased. Using the resulting membranes for the vacuum membrane distillation desalt of the NaCl solution (30 g/L), 99.9% salt rejection and reasonable flux were obtained. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45792.     

Melt grafting of 10‐undecenoic acid onto linear low density polyethylene

The melt grafting of 10‐undecenoic acid (UA) onto a linear low‐density polyethylene (LLDPE) was studied. The grafting reaction was performed in a thermoplastic mixer and 2,5‐dimethyl‐2,5‐di(tert‐butylperoxy) hexane was used as initiator. The concentration of UA and peroxide ranged from 1 to 4% (w/w) and 0.025 to 0.1% (w/w), respectively. Evidence of the grafting of UA as well as its extent was determined by FTIR. Experimental results showed that the amount of UA grafted increases with both the UA and initiator concentrations. However, the greatest efficiency of grafting was found at the lowest concentration of UA investigated. The grafting efficiency ranged from 8 to 40%. The dynamic linear viscoelastic properties of the original polymer and the grafted materials were evaluated at different frequencies at 160°C using a dynamic rotational rheometer. The modification process affected the melt elasticity and viscosity of the LLDPE. When the original polymer was modified only with peroxide both properties increased with respect to those of the original material. However, when UA was grafted onto LLDPE, the resulting polymers displayed values of elastic moduli and viscosity lower than those of the polymer modified with peroxide. Moreover, when a concentration of 4% of UA was used, the values of those properties were even lower than those corresponding to the original LLDPE. These observations combined with the data obtained from the GPC results suggest that scission reactions may be favored by the presence on UA. In contrast with previous observations, the thermal properties measured by DSC were only slightly altered. The fusion temperature of the modified polymers was slightly lower than that corresponding to the original polymer. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2303–2311, 2004