Responses of MAC‐T Cells to Inhibited Stearoyl‐CoA Desaturase 1 during cis‐9, trans‐11 Conjugated Linoleic Acid Synthesis

Cis‐9‐conjugated, trans‐11‐conjugated linoleic acid (CLA) is known for its positive activities on human health. The synthesis of cis‐9, trans‐11 CLA in mammary glands is generally thought to be catalyzed by stearoyl‐CoA desaturase 1 (SCD1), but this has not been rigorously established. In this study, we hypothesized that the inhibition of SCD1 (by CAY10566) would block the synthesis of cis‐9, trans‐11 CLA in bovine mammary alveolar cells (MAC‐T) cells. Results showed that MAC‐T cells incubated with 10 nM CAY10566 for 12 h (CAY) produced less cis‐9, trans‐11 CLA (p < 0.01), lower 14:1/(14:1 + 14:0)% (p < 0.01), more trans‐11 18:1 (TVA) accumulation (p < 0.01), and reduced SCD1 mRNA levels (p < 0.01) compared with the control group (CON). Moreover, the mRNA abundances of sterol regulatory element‐binding protein 1 [SREBPF1], acyl‐CoA synthetase short‐chain family member 2 [ACSS2], and lipin 1 [LPIN1] were significantly elevated when SCD1 was inhibited in the CAY group (p < 0.05). Taken together, CAY10566 inhibition of SCD1 resulted in lower cis‐9, trans‐11 CLA synthesis ability, and SREBF1, ACSSS2, and LPIN1 were negatively associated with SCD1. These findings not only provide the direct evidence that cis‐9, trans‐11 CLA synthesis is catalyzed by SCD1, but also help us understand the responses of MAC‐T cells to SCD1 inhibition.     

P‐V‐T measurements on PMMA : PbTiO3 polymer‐ceramic composites with tunable thermal expansion

Results of Pressure‐Volume‐Temperature measurement on Poly(methyl methacrylate) : Lead Titanate, PMMA : PbTiO₃, composite system in the pressure and temperature range 0–200 MPa and 300–473 K, respectively, are presented. The thermal expansion coefficient in PMMA : PbTiO₃ composite is expected to be quite complex because the polymer has positive thermal expansion coefficient, whereas the filler has a negative thermal expansion coefficient. In this present article, the effect of pressure on the volumetric thermal expansion coefficient in PMMA : PbTiO₃ composite system is presented. It is shown that thermal expansion coefficient of the polymer can be tailored by adding filler which has negative thermal expansion coefficient. Theoretically, a simple additive rule is formulated which can predict the variation of expansion coefficient in the PMMA : PbTiO₃ composite system. The limitation of the additive rule is also discussed. It is also shown that the glass transition temperature depends on filler concentration and also has strong pressure dependence. The reasons for large pressure dependence are discussed. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Theoretical analysis of fracture of tetra‐needle‐like ZnO whisker in polymer composite

It is of practical importance to develop the tetra‐needle‐shaped ZnO whisker (T‐ZnOw)‐reinforced polymer composites that have isotropic properties. To give a guidance of material design and manufacture, it is necessary to have a theoretical analysis of the fracture mechanisms of this peculiar structure fiber in polymer composites. Based on previous investigations of the T‐ZnOw‐reinforced polymer composites, and from the viewpoint of materials mechanics, here we analyzed the distribution of stresses on different points of the tetra‐ needle‐like crystal whiskers in a composite and calculated the total stress at the connection point. The results indicate that the stress on the connection point is proportional to the exerting force and correlates with the dimension, the size, and the location of the whiskers. According to the theoretical derivations, it was found that the stress at the connection point of the T‐ZnOw is much larger than that at the others, leading to breakage on that point mainly or wholly, which is in accordance with the experimental observations. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

High‐Throughput T‐Jets Mixers: An Innovative Scale‐Up Concept

The influence of geometrical and design parameters of T‐jets mixers on flow dynamics and mixing patterns is studied by means of two‐dimensional computational fluid dynamics simulations, planar laser‐induced fluorescence, and test chemical reactions. The ratios between injector width and mixing chamber width and between width and depth of the mixing chamber were evaluated as parameters. These ratios determine the flow regime in T‐jets mixers: high values of injector/chamber width ratio favor mixing and high depth values also increase the flow dynamics and thus mixing. A strategy for scale‐up of T‐jets mixers is devised, based on increasing a noncritical dimension (depth) while keeping other dimensions small.     

The First Example of Saccharin‐Lithium Bromide Catalysis: Direct Synthesis of N‐Tosylimines from Alcohols

The first procedure to access N‐tosylimines directly from alcohols under mild and neutral conditions is reported. The protocol involves saccharin‐lithium bromide‐catalyzed oxidation of alcohols to aldehydes/ketones with chloramine‐T followed by their condensation with the in situ generated oxidation by‐product p‐toluenesulfonamide in the same reaction vessel to afford N‐tosylimines in 40–90% overall yields. The present work opens up a new and efficient synthetic route to N‐tosyimines directly from alcohols in a one‐pot procedure.     

Phase separation of gas–liquid two‐phase stratified and plug flows in multitube T‐junction separators

Using air and water as the working fluids, phase separation phenomena for stratified and plug flows at inlet were investigated experimentally, at a simple T‐junction and specifically designed multitube T‐junction separators with two or three layers. The results show that for these two flow patterns the separation efficiency of the two phases for any multitube T‐junction separator is much higher than that of the simple T‐junction. Increasing the number of connecting tubes in the multitube T‐junction separator can increase the separation efficiency. Generally, for stratified flow, complete separation of the two phases can be achieved by the two‐layer multitube T‐junction separator with five or more connecting tubes and by the three‐layer separator; increasing the gas flow rate, the liquid flow rate, or the mixture velocity under plug flow is detrimental to phase separation with a drop in peak separation efficiency. © 2016 American Institute of Chemical Engineers AIChE J, 63: 2285–2292, 2017     

Characterization of 4,6‐Diazido‐N‐nitro‐1,3,5‐triazine‐2‐amine

4,6‐Diazido‐N‐nitro‐1,3,5‐triazine‐2‐amine (DANT) was prepared with a 35 % yield from cyanuric chloride in a three step process. DANT was characterized by IR and NMR spectroscopy (¹H, ¹³C, ¹⁵N), single‐crystal X‐ray diffraction, and DTA. The crystal density of DANT is 1.849 g cm⁻³. The cyclization of one azido group and one nitrogen atom of the triazine group giving tetrazole was observed for DANT in a dimethyl sulfoxide solution using NMR spectroscopy. An equilibrium exists between the original DANT molecule and its cyclic form at a ratio of 7 : 3. The sensitivity of DANT to impact is between that for PETN and RDX, sensitivity to friction is between that for lead azide and PETN, and sensitivity to electric discharge is about the same as for PETN. DANT′s heat of combustion is 2060 kJ mol⁻¹.     

Structural evolution of the R‐T phase boundary in KNN‐based ceramics

Although a rhombohedral‐tetragonal (R‐T) phase boundary is known to substantially enhance the piezoelectric properties of potassium‐sodium niobate ceramics, the structural evolution of the R‐T phase boundary itself is still unclear. In this work, the structural evolution of R‐T phase boundary from ?150°C to 200°C is investigated in (0.99?x)K_0.5Na_0.5Nb_1?ySb_yO₃–0.01CaSnO₃–xBi_0.5K_0.5HfO₃ (where x = 0‐0.05 with y = 0.035, and y = 0‐0.07 with x = 0.03) ceramics. Through temperature‐dependent powder X‐ray diffraction (XRD) patterns and Raman spectra, the structural evolution was determined to be Rhombohedral (R, <?125°C)→Rhombohedral + Orthorhombic (R + O, ?125°C to 0°C)→Rhombohedral + Tetragonal (R + T, 0 °C to 150°C)→dominating Tetragonal (T, 200°C to Curie temperature (T_C)) → Cubic (C, >T_C). In addition, the enhanced electrical properties (e.g., a direct piezoelectric coefficient (d₃₃) of ~450 ± 5 pC/N, a conversion piezoelectric coefficient () of ~580 ± 5 pm/V, an electromechanical coupling factor (k_p) of ~0.50 ± 0.02, and T_C~250°C), fatigue‐free behavior, and good thermal stability were exhibited by the ceramics possessing the R‐T phase boundary. This work improves understanding of the physical mechanism behind the R‐T phase boundary in KNN‐based ceramics and is an important step toward their adoption in practical applications.     

Relation between microstructure and glass transition temperature of poly[(methyl methacrylate)‐co‐(ethyl acrylate)]

The glass transition temperature of a series of samples of the poly[(methyl methacrylate)‐co‐(ethyl acrylate)] copolymer, synthesized at low conversion, were calculated theoretically using the equations of Barton and Johnston. The values obtained are more precise when the probabilities of the compositional diads are derived from the ¹³C NMR data instead of the classical method utilizing reactivity ratios. This can be observed more clearly when the copolymer samples are synthesized at high conversion. Introduction of configuration (tacticity) at the diad level confirms the above observations and slightly improves the calculated values of T_g compared to the initial formulae which were only taking into account the compositional sequences of the copolymer. © 2001 Society of Chemical Industry     

Lecithin‐enhanced biotransformation of cholesterol to androsta‐1,4‐diene‐3,17‐dione and androsta‐4‐ene‐3,17‐dione

A biotransformation process using Mycobacterium sp was studied for androsta‐1, 4‐diene‐3,17‐dione (ADD) and androsta‐4‐ene‐3,17‐dione (AD) production from cholesterol. Cholesterol has a poor solubility in water (～1.8 mg dm^?3 at 25 °C), which makes it difficult to use as the substrate for biotransformation. Lecithin is a mixture of phospholipids of phosphatidylcholine (PC) and phosphatidylethanolamine (PE), which behave like surfactants and can form planar bi‐layer structures in an aqueous medium. Therefore, a small amount of lecithin (<1 g dm^?3) can be used to form stable colloids with cholesterol at a relatively high concentration (20 g dm^?3) in water. In this work, an energy density of 1000 J cm^?3 from sonication was provided to overcome the self‐association of cholesterol and to generate a stable lecithin–cholesterol suspension that could be used for enhanced biotransformation. The lecithin–cholesterol suspension was stable and could withstand typical autoclaving conditions (121 °C, 15 psig, 20 min). In contrast to conventional surfactants, such as Tween 80, that are commonly used to help solubilize cholesterol, lecithin did not change the surface tension of the aqueous solution nor cause any significant foaming problem. Lecithin was also biocompatible and showed no adverse effect on cell growth. Compared with the medium with Tween 80 as the cholesterol‐solubilizing agent, lecithin greatly improved the biotransformation process in regard to its final product yield (～59% w/w), productivity (0.127–0.346 g dm^?3 day^?1), ADD/AD ratio (6.7–8), as well as the long‐term process stability. Cells can be reused in repeated batch fermentations for up to seven consecutive batches, but then lose their bioactivity due to aging problems, possibly caused by product inhibition and nutrient depletion. © 2002 Society of Chemical Industry     

An Ab Initio Theoretical Study of 2,4,6‐Trinitro‐1,3,5‐Triazine, 3,6‐Dinitro‐1,2,4,5‐Tetrazine,and 2,5,8‐Trinitro‐Tri‐s‐Triazine

In order to evaluate 2,4,6‐trinitro‐1,3,5‐triazine (TNTAz), 3,6‐dinitro‐1,2,4,5‐tetrazine (DNTAz), and 2,5,8‐trinitro‐tri‐s‐triazine (TNTsTAz), the geometries of these compounds have been fully optimized employing the B3LYP density functional method and the AUG‐cc‐pVDZ basis set. The accurate gas phase enthalpies of formation have been obtained by using the atomization procedure and designing isodesmic reactions in which the parent rings are not destroyed. Based on B3LYP/AUG‐cc‐pVDZ calculated geometries and natural charges, the crystal structures have been predicted using the Karfunkel–Gdanitz method. Computed results show that there exists extended conjugation over the parent rings of these compounds. More energy content is reserved in DNTAz than in both TNTAz and TNTsTAz. The title compounds are much more sensitive than 1,3,5‐trinitrobenzene. The calculated detonation velocity of DNTAz reaches 9.73–9.88 km s⁻¹, being larger than those of CL‐20 and TNTAz. TNTsTAz has no advantage over the widely used energetic compounds such as RDX and HMX.     

Silver Salt of 4,6‐Diazido‐N‐nitro‐1,3,5‐triazine‐2‐amine – Characterization of this Primary Explosive

A new primary explosive, the silver salt of 4,6‐diazido‐N‐nitro‐1,3,5‐triazine‐2‐amine (AgDANT), was synthesized and characterized. AgDANT was prepared with a 97 % yield and characterized by IR spectroscopy, single‐crystal X‐ray diffraction, and DTA. The crystal density of AgDANT is 2.530 g cm⁻³ and the molecule consists of a centro‐symmetric dimer with a high degree of planarity. The intramolecular Ag Ag distance is relatively low (331 pm) and can be considered as a strong argentophilic interaction. AgDANT is non‐hygroscopic and its solubility in water (1.27 mg in 100 mL at 23 °C) is on a similar level of solubility to that of silver azide. The sensitivity of AgDANT to impact is slightly higher than that for MF, sensitivity to friction is the same as for LA, and sensitivity to electric discharge is between that for LS and MF. Initiation efficiency of AgDANT was tested in electric detonators and compared to dextrinated lead azide (initiation efficiency of AgDANT is 40 mg for PETN secondary charge). The thermal resistance of detonators with AgDANT is satisfactory; all detonators were fully functional after exposure at 65 °C (30 d) and 85 °C (2 d).     

Enzymatic Synthesis of 1‐Alkyl‐2‐hydroxy‐sn‐glycero‐2,3‐cyclic‐phosphate Using a Novel Lysoplasmalogen‐Specific Phopholipase D

Many phospholipase Ds (PLDs) are known to catalyze transphosphatidylation as well as hydrolysis of phospholipids. Transphosphatidylation of lysoplasmalogen (LyPls)‐specific phospholipase D (LyPls‐PLD), which catalyzes hydrolysis of ether lysophospholipids such as LyPls and 1‐hexadecyl‐2‐hydroxy‐sn‐glycero‐3‐phosphocholine (Lyso‐PAF), still remains unclear. This study aims to reveal the transphosphatidylation activity of LyPls‐PLD, that is, the production of cyclic ether lysophospholipid. The enzymatic reaction is conducted in a buffer system, and the reaction products of a novel LyPls‐PLD from Thermocrispum sp. are investigated using mass spectrometry (MS). MS analyses demonstrate the reaction products to consist of 100% 1‐hexadecyl‐2‐hydroxy‐sn‐glycero‐2,3‐cyclic‐phosphate (cLyPA) and choline from Lyso‐PAF; however, 1‐alkenyl‐2‐hydroxy‐sn‐glycero‐2,3‐cyclic‐phosphate from 1‐O‐1′‐(Z)‐octadecenyl‐2‐hydroxy‐sn‐glycero‐3‐phosphocholine and 1‐O‐1′‐(Z)‐octadecenyl‐2‐hydroxy‐sn‐glycero‐3‐phosphoethanolamine is not produced. These results are expected to help in elucidating the catalytic mechanism of LyPls‐PLD, that is, the rate‐limiting step, and indicate LyPls‐PLD to be useful for the one‐pot synthesis of cLyPA. Practical Applications: A novel phospholipase D, LyPls‐PLD, can exclusively synthesize cLyPA from Lyso‐PAF using a one‐step enzymatic reaction without an organic solvent. cLyPA could be expected to show bioactivities similar to those of cyclic phosphatidic acid, which promotes normal cell differentiation, hyaluronic acid synthesis, antiproliferative activity in fibroblasts, and inhibitory activity toward cancer cell invasion and metastasis.     

13C‐NMR study on cure‐accelerated phenol‐formaldehyde resins with carbonates

Both liquid‐ and solid‐state carbon‐13–nuclear magnetic resonance (¹³C‐NMR) spectroscopies were used to investigate the cure acceleration effects of three carbonates (propylene carbonate, sodium carbonate, and potassium carbonate) on liquid and cured phenol‐formaldehyde (PF) resins. The liquid‐phase ¹³C‐NMR spectra showed that the cure acceleration mechanism in the propylene carbonate‐added PF resin seemed to be involved in increasing reactivity of the phenol rings, whereas the addition of both sodium carbonate and potassium carbonate into PF resin apparently resulted in the presence of ortho–ortho methylene linkages. Proton spin‐lattice rotating frame relaxation time (T_1ρH) measured by solid‐state ¹³C cross polarization/magic‐angle spinning NMR spectroscopy was smaller for the cure‐accelerated PF resins than that of the control PF resin. The result indicated that the cure‐accelerated PF resins are less rigid than the control PF resin. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 1284–1293, 2000     

Crystallization behavior of 1,3‐dipalmitoyl‐2‐oleoyl‐glycerol and 1‐palmitoyl‐2,3‐dioleoyl‐glycerol

A model margarine was stored under a temperature fluctuation cycle of 5—20 °C until granular crystals were observed. Using information obtained from the granular crystals, the crystallization behaviors of major triacylglycerols of palm oil, 1,3‐dipalmitoyl‐2‐oleoyl‐glycerol (POP), 1‐palmitoyl‐2,3‐dioleoyl‐glycerol (POO), and their mixtures were then investigated. It was shown that in the model margarine, the POP content in the granular crystals was higher than in their surrounding materials, and the X‐ray diffraction pattern of the granular crystals revealed that they were the most stable polymorph, β. 99% pure POP, POO, and their mixtures were then stored under the above‐mentioned temperature cycle. POP was found to form the unstable polymorph, α, when cooled rapidly from the melt. Within 24 hours transformation into the γ polymorph and then into the β polymorph was observed. POO was shown to transform into the β' polymorph from α. When POP and POO were mixed, the β polymorph did not emerge, instead it was shown that POP and POO were both agglomerated in the mixtures, giving rise to the formation of granular crystals.     

Depletion of cross‐stream diffusion in the presence of viscoelasticity

An effort to analyze the viscoelasticity effects on transverse transport of neutral solutes between two miscible streams in an electrokinetic T‐sensor is presented. The analysis is based on an approximate analytical solution for the depthwise averaged concentration, assuming a channel of large width to depth ratio for which a one‐dimensional profile is sufficient for describing the velocity field. We show that the solution derived is surprisingly accurate even for very small channel aspect ratios and the maximum error reduces to only about 1% when the aspect ratio is 5. The developed model reveals that the mixing length for a viscoelastic fluid may be by far larger than that for a Newtonian fluid. Moreover, the Taylor dispersion coefficient for electroosmotic flow of viscoelastic fluids, which its determination is a main part of the analysis, is found to be an increasing function of both the elasticity level and the EDL thickness. © 2015 American Institute of Chemical Engineers AIChE J, 61: 4533–4541, 2015     

Synthesis of novel phosphorous‐containing biphenol, 2‐(5, 5‐dimethyl‐4‐phenyl‐2‐oxy‐1,3,2‐dioxaphosphorin‐6‐yl)‐1,4‐benzenediol and its application as flame‐retardant in epoxy resin

A novel phosphorous‐containing biphenol, 2‐(5,5‐dimethyl‐4‐phenyl‐2‐oxy‐1,3,2‐dioxaphosphorin‐6‐yl)‐ 1,4‐benzenediol (DPODB), was prepared by the addition reaction between 5,5‐dimethyl‐4‐phenyl‐2‐oxy‐1,3,2‐dioxaphosphorinane phosphonate (DPODP) and p‐benzoquinone (BQ). The compound (DPODB) was used as a reactive flame retardant in o‐cresol formaldehyde novolac epoxy resin (CNE) for electronic application. The structure of DPODB was confirmed by FTIR and NMR spectra. Thermal properties of cured epoxy resin were studied using differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA). The flame retardancy of cured epoxy resins was tested by UL‐94 vertical test and achieved UL‐94 vertical tests of V‐0 grade (nonflammable). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3842–3847, 2006     

1‐Amino‐1‐hydrazo‐2,2‐dinitroethene – a Hazard Warning

1‐Amino‐1‐hydrazo‐2,2‐dinitroethene ( 2 ) has been observed to spontaneously decompose with considerable violence during storage. Its preparation and handling should be regarded as potentially hazardous.     

Synergistic extraction of rare earths(III) from chloride medium with mixtures of 1‐phenyl‐3‐methyl‐4‐benzoyl‐pyrazalone‐5 and di‐(2‐ethylhexyl)‐2‐ethylhexylphosphonate

The synergistic effect of 1‐phenyl‐3‐methyl‐4‐benzoyl‐pyrazalone‐5 (HPMBP, HA) and di‐(2‐ethylhexyl)‐2‐ethylhexylphosphonate (DEHEHP, B) in the extraction of rare earths (RE) from chloride solutions has been investigated. Under the experimental conditions used, there was no detectable extraction when DEHEHP was used as a single extractant while the amount of RE(III) extracted by HPMBP alone was also low. But mixtures of the two extractants at a certain ratio had very high extractability for all the RE(III). For example, the synergistic enhancement coefficient was calculated to be 9.35 for Y³⁺, and taking Yb³⁺ and Y³⁺ as examples, RE³⁺ is extracted as RE(OH)A₂.B. The stoichiometry, extraction constants and thermodynamic functions such as Gibbs free energy change ΔG (?17.06 kJ mol^?1), enthalpy change ΔH (?35.08 kJ mol^?1) and entropy change ΔS (?60.47 J K^?1 mol^?1) for Y³⁺ at 298 K were determined. The separation factors (SF) for adjacent pairs of rare earths were calculated. Studies show that the binary extraction system not only enhances the extraction efficiency of RE(III) but also improves the selectivity, especially between La(III) and the other rare earth elements. Copyright © 2006 Society of Chemical Industry