Synthesis of thermoresponsive polymeric micelles of PNIPAAm‐b‐OMMA as a drug carrier for loading and controlled release of prednisolone

We synthesized a drug delivery system of poly(N‐isopropylacrylamide)‐b‐oligo(methyl methacrylate) (PNIPAAm‐b‐OMMA) via polycondensation of two homopolymers in 1,4‐dioxane. The products are characterized by FT‐IR and ¹H‐NMR spectra and TEM. The PNIPAAm‐b‐OMMA copolymer micelles in aqueous solution present the same lower critical solution temperature (LCST) as the unmodified PNIPAAm, owing to the formation of a core–shell micellar structure that the hydrophilic shell shields the hydrophobic inner OMMA core from interacting with water. The micelle carriers exhibit two heterogeneous microdomains: a hydrophobic inner core capable of highly solubilizing hydrophobic prednisolone molecules, plus a hydrated outer shell that stabilizes this micellar structure below its LCST. Moreover, the micelle carriers show reversible thermoresponsive aggregation/dispersion in response to temperature cycles through the LCST. By using the antiinflammation drug prednisolone as model drug, it is found that the PNIPAAm‐b‐OMMA drug carrier could prolong the release time and control the release amount by changing the temperature. Accordingly, this copolymer micelle may provide as an effective drug carrier for drug control and release. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Thermoresponsive core-shell-corona micelles of poly(ethyleneglycol)-b-poly(N-isopropylacrylamide)-b-polystyrene

Core-shell-corona micelles with a thermoresponsive shell self-assembled by triblock copolymer of poly(ethyleneglycol)-b-poly(N-isopropylacrylamide)-b-polystyrene (PEG₄₅-b-PNIPAM₁₆₈-b-PS₄₆) are studied by ¹H NMR, light scattering and atomic force microscopy. The thermoresponsive triblock copolymer, which has a relatively short hydrophobic PS block, can disperse in water at room temperature to form core-shell-corona micelles with the hydrophobic PS block as core, the thermoresponsive PNIPAM block as shell and the hydrophilic PEG block as corona. At temperature above lower critical solution temperature (LCST) of the PNIPAM block, the PNIPAM chains gradually collapse on the PS core to shrink the size and change the structure of the resultant core-shell-corona micelles with temperature increasing. It is found that there possibly exists an interface between the PNIPAM shell and PEG corona of the core-shell-corona micelles at temperature above LCST of the PNIPAM block.     

Thermoresponsive behaviour in aqueous solution of poly(maleic acid‐alt‐vinyl acetate) grafted with poly(N‐isopropylacrylamide)

The synthesis of a thermoresponsive graft copolymer consisting of a maleic acid/vinyl acetate alternating copolymer backbone (MAc‐alt‐VA) and poly(N‐isopropylacrylamide) (PNIPAM) side chains is reported. Turbidimetric measurements in dilute aqueous solutions showed that no macroscopic phase separation takes place when the temperature is raised above the lower critical solution temperature (LCST) of PNIPAM, even at pH = 2. Moreover, in semi‐dilute aqueous solutions, a pronounced thermally induced viscosity increase (thermothickening) was observed. This thermoresponsive behaviour has been attributed to the interconnection of the hydrophilic MAc‐alt‐VA graft copolymer backbones by means of the hydrophobic PNIPAM side chain aggregates formed as the temperature increases above the LCST of this polymer. Copyright © 2004 Society of Chemical Industry     

Synthesis and tunable thermoresponsive solution morphologies of 2,2‐bis‐methylolpropionic acid dendron–azobenzene–poly(N‐isopropyl acrylamide) copolymers

Amphiphilic temperature‐ and photoresponsive linear–dendritic block copolymers comprising second‐generation acetonide‐2,2‐bis‐methylolpropionic acid‐based polyester dendron and linear poly(N‐isopropyl acrylamide) (PNIPAM) linked by an azobenzene unit were synthesized using atom transfer radical polymerization (ATRP) followed by click chemistry. Linear PNIPAM precursor was prepared from an azide‐functionalized azobenzene containing ATRP initiator. Two polymers obtained by varying the chain length of the PNIPAM block showed different morphologies and lower critical solution temperature (LCST) values in aqueous solution. Complete change in morphology of the two polymers into large spherical aggregates and nanotubes, respectively, was observed upon heating the micellar solution above LCST. The azobenzene unit was found to undergo trans–cis photoisomerization in the assemblies and caused a change in the microenvironment of an encapsulated hydrophobic dye without any release. Acetonide groups on the dendron were deprotected to afford hydroxylated polymer that showed well‐defined morphologies above the LCST and after heating–cooling cycle while significant dye encapsulation was seen only above the LCST. © 2017 Society of Chemical Industry     

Synthesis of amphiphilic temperature‐sensitive poly(N‐isopropylacrylamide)‐block‐poly(tetramethylene carbonate) block copolymers and micellar characterization

Amphiphilic thermally sensitive poly(N‐isopropylacrylamide)‐block‐poly(tetramethylene carbonate) block copolymers were synthesized by ring‐opening polymerization of tetramethylene carbonate with hydroxyl‐terminated poly(N‐isopropylacrylamide) (PNiPAAm) as macro‐initiator in the presence of stannous octoate as catalyst. The synthesis involved PNiPAAm bearing a single terminal hydroxyl group prepared by telomerization using 2‐hydroxyethanethiol as a chain‐transfer agent. The copolymers were characterized using ¹H NMR and Fourier transform infrared spectroscopy and gel permeation chromatography. Their solutions show reversible changes in optical properties: transparent below the lower critical solution temperature (LCST) and opaque above the LCST. The LCST depends on the polymer composition and the media. Owing to their amphiphilic characteristics, the block copolymers form micelles in the aqueous phase with critical micelle concentrations (CMCs) in the range 1.11–22.9 mg L^?1. Increasing the hydrophobic segment length or decreasing the hydrophilic segment length in the amphiphilic diblock copolymers produces lower CMCs. A core‐shell structure of the micelles is evident from ¹H NMR analyses of the micelles in D₂O. Transmission electron microscopic analyses of micelle morphology show a spherical structure of both blank and drug‐loaded micelles. The blank and drug‐loaded micelles have an average size of less than 130 nm. Observations show high drug‐entrapment efficiency and drug‐loading content for the drug‐loaded micelles. Copyright © 2010 Society of Chemical Industry     

Double-responsive core-shell-corona micelles from self-assembly of diblock copolymer of poly(t-butyl acrylate-co-acrylic acid)-b-poly(N-isopropylacrylamide)

Self-assembly of poly(t-butyl acrylate-co-acrylic acid)-b-poly(N-isopropylacrylamide) [P(tBA-co-AA)-b-PNIPAM], which was obtained from part hydrolysis of PtBA-b-PNIPAM synthesized by sequential atom transfer radical polymerization (ATRP) was studied. Thermo- and pH-responsive core-shell-corona (CSC) micelles with different structures were formed from (PtBA-co-PAA)-b-PNIPAM in aqueous solution. At pH 5.8 and 25 °C, the block copolymer self-assembled into spherical core-shell micelles with hydrophobic PtBA segments as the core, hydrophilic PAA/PNIPAM segments as the mixed shell. Increasing temperatures, core-shell micelles converted into CSC micelles with PtBA as the core, collapsed PNIPAM as the shell and soluble PAA as the corona. Moreover, decreasing pH at 25 °C, PAA chains collapsed onto the core resulting in CSC micelles with PtBA as the core, PAA as the shell and PNIPAM as the corona.     

Poly(N‐isopropylacrylamide‐co‐hydroxyethyl methacrylate) graft copolymers and their application as carriers for drug delivery system

Poly(N‐isopropylacrylamide‐co‐hydroxyethyl methacrylate) [P(NIPAM‐co‐HEMA)] copolymer was synthesized by controlled radical polymerization from respective N‐isopropylacrylamide (NIPAM) and hydroxyethyl methacrylate (HEMA) monomers with a predetermined ratio. To prepare the thermosensitive and biodegradable nanoparticles, new thermosensitive graft copolymer, poly(L ‐lactide)‐graft‐poly(N‐isoporylacrylamide‐co‐hydroxyethyl methacrylate) [PLLA‐g‐P(NIPAM‐co‐HEMA)], with the lower critical solution temperature (LCST) near the normal body temperature, was synthesized by ring opening polymerization of L ‐lactide in the presence of P(NIPAM‐co‐HEMA). The amphiphilic property of the graft copolymers was formed by the grafting of the PLLA hydrophobic chains onto the PNIPAM based hydrophilic backbone. Therefore, the graft copolymers can self‐assemble into uniformly spherical micelles ò about 150–240 nm in diameter as observed by the field emission scanning electron microscope and dynamic light scattering. Dexamethasone can be loaded into these nanostructures during dialysis with a relative high loading capacity and its in vitro release depends on temperature. Above the LCST, most of the drugs were released from the drug‐loaded micelles, whereas a large amount of drugs still remains in the micelles after 48 h below the LCST. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Study on micellization of poly(N‐isopropylacrylamide‐butyl acrylate) macromonomers in aqueous solution

A kind of thermo‐sensitive macromonomer, styrene‐terminated poly(N‐isopropylacrylamide‐butyl acrylate) [P(NIPAm‐BA)] has been synthesized in this work. With the help of ultraviolet spectrum (UV), proton nuclear magnetic resonance (¹H‐NMR), potentiometric titration and dynamic light scattering (DLS), the molecular structure, thermo‐sensitive characteristics, and micellization behaviors of this kind of macromonomer have been investigated. The obtained results demonstrate that, the molecular structure of thermo‐sensitive macromonomer, including the content of comonomer unit on the backbones and the variety of terminal groups, has great influence on its low critical solution temperature (LCST) and critical micelle concentration (CMC). © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Water‐dispersible porous polyisoprene‐block‐poly(acrylic acid) microspheres

Two polyisoprene‐block‐poly(tert‐butyl acrylate) (PI‐b‐PtBA) samples and a poly(tert‐butyl acrylate) (PtBA) homopolymer (hPtBA) were prepared by anionic polymerization and characterized by light scattering, size exclusion chromatography, and NMR. The tert‐butyl groups were removed from one of the diblocks to yield amphiphilic polyisoprene‐block‐poly(acrylic acid) (PI‐b‐PAA). PI‐b‐PAA was then used as the surfactant to disperse dichloromethane containing PI‐b‐PtBA and hPtBA at different weight ratios as oil droplets in water. Solid microspheres containing segregated polyisoprene (PI) and PtBA/hPtBA domains were obtained after dichloromethane evaporation. Permanent microspheres were obtained after PI domain crosslinking with sulfur monochloride. Porous microspheres were produced after the hydrolysis of PtBA and the extraction of the homopoly(acrylic acid) chains. The shape and connectivity of the poly(acrylic acid)‐lined pores were tuned by changes in the PtBA/hPtBA content in the precursor microspheres. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2785–2793, 2003     

Thermosensitive self‐assembly micelles from A2BA2‐type poly(N‐isopropyl acrylamide)2‐b‐Poly(lactic acid)‐b‐Poly(N‐isopropyl acrylamide)2 four‐armed star block copolymers and their applications as drug carriers

A novel A₂BA₂‐type thermosensitive four‐armed star block copolymer, poly(N‐isopropyl acrylamide)₂‐b‐poly(lactic acid)‐b‐poly(N‐isopropyl acrylamide)₂, was synthesized by atom transfer radical polymerization and characterized by ¹H‐NMR, Fourier transform infrared spectroscopy, and size exclusion chromatography. The copolymers can self‐assemble into nanoscale spherical core–shell micelles. Dynamic light scattering, surface tension, and ultraviolet–visible determination revealed that the micelles had hydrodynamic diameters (D_h) below 200 nm, critical micelle concentrations from 50 to 55 mg/L, ζ potentials from ?7 to ?19 mV, and cloud points (CPs) of 34–36°C, depending on the [Monomer]/[Macroinitiator] ratios. The CPs and ζ potential absolute values were slightly decreased in simulated physiological media, whereas D_h increased somewhat. The hydrophobic camptothecin (CPT) was entrapped in polymer micelles to investigate the thermo‐induced drug release. The stability of the CPT‐loaded micelles was evaluated by changes in the CPT contents loaded in the micelles and micellar sizes. The MTT cell viability was used to validate the biocompatibility of the developed copolymer micelle aggregates. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 4137–4146, 2013     

Thermal and pH dual‐responsive hydrogels based on semi‐interpenetrating network of poly(N‐isopropylacrylamide) and collagen nanofibrils

Hydrogels with environment‐sensitive properties have great potential applications in the controlled drug release field. In this paper, hybrid hydrogels with semi‐interpenetrating polymer networks (semi‐IPNs), composed of poly(N‐isopropylacrylamide) (PNIPAM) as the thermo‐sensitive component by in situ polymerization and self‐assembled collagen nanofibrils as the pH‐sensitive framework, were prepared for controlled release of methyl violet as a model drug. From Fourier transform infrared spectroscopy and scanning electron microscopy, it was indicated that the crosslinking of PNIPAM in the presence of collagen nanofibrils led to the formation of semi‐IPNs with homogeneous porous structure, and the semi‐IPNs showed improved thermal stability and elastic properties compared with the native collagen as determined using differential scanning calorimetry and rheologic measurements. Furthermore, the semi‐IPNs possessed swelling behaviors quite different from those of neat collagen or PNIPAM hydrogel under various pH values and temperatures. Correspondingly, as expected, the drug release behavior in vitro for semi‐IPNs performed variously compared with that for single‐component semi‐IPNs, which revealed the tunable performance of semi‐IPNs for release ability. Finally the thermo‐ and pH‐responsive mechanism of the semi‐IPNs was illuminated to provide guidance for the application of the thermo‐ and pH‐sensitive collagen‐based hybrid hydrogels in controlled drug delivery systems. © 2019 Society of Chemical Industry     

Concentration effect on aggregation and dissolution behavior of poly(N‐isopropylacrylamide) in water

The concentration effect on aggregation and dissolution behavior of poly(N‐isopropylacrylamide) (PNIPAM) in water was studied. Three concentration regimes with different phase behavior were identified by differential scanning calorimetry (DSC). Further optical, light‐scattering, and rheological studies indicated that the appearance of different regimes arose from their corresponding solution structures below lower critical solution temperature (LCST): free chains and small clusters in regime I, large clusters in regime II, and a gel‐like network in regime III. Different solution structures below LCST led to different phase‐separated patterns formed above LCST: colloidal particles in regime I, large precipitate in regime II, and the sponge‐like solid in regime III, which was well understood based on the overlapping parameter P. Different phase‐separated patterns therefore resulted in different remixing behavior as observed by DSC. This work suggests that the swelling and collapse behavior of PNIPAM based hydrogels was controlled through the design of their phase‐separated patterns, and therefore provided a way to develop high performance thermo‐sensitive materials. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41669.     

α‐cyclodextrin assisted self‐assembly of poly(ethylene glycol)‐block‐poly(N‐isopropylacrylamide) in aqueous media

Poly(ethylene glycol)‐block‐poly(N‐isopropylacrylamide) (PEG‐b‐PNIPAM) block copolymers were synthesized by atom transfer radical polymerization, and the α‐cyclodextrin (α‐CD) induced self‐assembly characteristics of the system were elucidated. Below the lower critical solution temperature (LCST) of PNIPAM, CD threaded onto the PEG segments and induced micellization to form rod‐shaped nanostructures comprising of a PEG/α‐CD condensed phase and a PNIPAM shell. Increasing the temperature of system above the LCST caused the PNIPAM segments to collapse, which resulted in the dethreading of the CD. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis and characterization of temperature‐sensitive block copolymers from poly(N‐isopropylacrylamide) and 4‐methyl‐ε‐caprolactone or 4‐phenyl‐ε‐caprolactone

This study synthesizes thermally sensitive block copolymers poly(N‐isopropylacrylamide)‐b‐poly(4‐methyl‐ε‐caprolactone) (PNIPA‐b‐PMCL) and poly(N‐isopropylacrylamide)‐b‐poly(4‐phenyl‐ε‐caprolactone) (PNIPA‐b‐PBCL) by ring‐opening polymerization of 4‐methyl‐ε‐caprolactone (MCL) or 4‐phenyl‐ε‐caprolactone (BCL) initiated from hydroxy‐terminated poly(N‐isopropylacrylamide) (PNIPA) as the macroinitiator in the presence of SnOct₂ as the catalyst. This research prepares a PNIPA bearing a single terminal hydroxyl group by telomerization using 2‐hydroxyethanethiol (ME) as a chain‐transfer agent. These copolymers are characterized by differential scanning calorimetry (DSC), ¹H‐NMR, FTIR, and gel permeation chromatography (GPC). The thermal properties (T_g) of diblock copolymers depend on polymer compositions. Incorporating larger amount of MCL or BCL into the macromolecular backbone decreases T_g. Their solutions show transparent below a lower critical solution temperature (LCST) and opaque above the LCST. LCST values for the PNIPA‐b‐PMCL aqueous solution were observed to shift to lower temperature than that for PNIPA homopolymers. This work investigates their micellar characteristics in the aqueous phase by fluorescence spectroscopy, transmission electron microscopy (TEM), and dynamic light scattering (DLS). The block copolymers formed micelles in the aqueous phase with critical micelle concentrations (CMCs) in the range of 0.29–2.74 mg L^?1, depending on polymer compositions, which dramatically affect micelle shape. Drug entrapment efficiency and drug loading content of micelles depend on block polymer compositions. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Thermosensitive polymeric micelles based on the triblock copolymer poly(d,l‐lactide)‐b‐poly(N‐isopropyl acrylamide)‐b‐poly(d,l‐lactide) for controllable drug delivery

A thermosensitive amphiphilic triblock copolymer, poly(d,l ‐lactide) (PLA)‐b‐poly(N‐isopropyl acrylamide) (PNIPAAM)‐b‐PLA, was synthesized by the ring‐opening polymerization of d,l ‐lactide; the reaction was initiated from a dihydroxy‐terminated poly(N‐isopropyl acrylamide) homopolymer (HO‐PNIPAAM‐OH) created by radical polymerization. The molecular structure, thermosensitive characteristics, and micellization behavior of the obtained triblock copolymer were characterized with Fourier transform infrared spectroscopy, ¹H‐NMR, gel permeation chromatography, dynamic light scattering, and transmission electron microscopy. The obtained results indicate that the composition of PLA‐b‐PNIPAAM‐b‐PLA was in good agreement with what was preconceived. This copolymer could self‐assemble into spherical core–shell micelles (ca. 75–80 nm) in aqueous solution and exhibited a phase‐transition temperature around 26 °C. Furthermore, the drug‐delivery properties of the PLA‐b‐PNIPAAM‐b‐PLA micelles were investigated. The drug‐release test indicated that the synthesized PLA‐b‐PNIPAAM‐b‐PLA micelles could be used as nanocarriers of the anticancer drug adriamycin (ADR) to effectively control the release of the drug. The drug‐delivery properties of PLA‐b‐PNIPAAM‐b‐PLA showed obvious thermosensitive characteristics, and the release time of ADR could be extended to 50 h. This represents a significant improvement from previous PNIPAAM‐based drug‐delivery systems. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45304.     

Epoxidized poly(N‐isopropyl acrylamide)‐b‐epoHTPB‐b‐poly(N‐isopropyl acrylamide) triblock copolymer micelle nanoparticles for 10‐hydroxycamptothecin drug release

Thermoresponsive poly(N‐isopropyl acrylamide) (PNIPAM)‐block‐hydroxy‐terminated polybutadine‐block‐PNIPAM triblock copolymers were synthesized by atom transfer radical polymerization; this was followed by the in situ epoxidation reaction of peracetic acid. The copolymers were characterized by ¹H‐NMR, Fourier transform infrared spectroscopy, and size exclusion chromatography measurements, and their physicochemical properties in aqueous solution were investigated by surface tension measurement, fluorescent spectrometry, ultraviolet–visible transmittance, transmission electron microscopy observations, dynamic light scattering, and so on. The experimental results indicate that the epoxidized copolymer micelle aggregates retained a spherical core–shell micelle structure similar to the control sample. However, they possessed a decreased critical aggregate concentration (CAC), increased hydrodynamic diameters, and a high aggregation number and cloud point because of the incorporation of epoxy groups and so on. In particular, the epoxidized copolymer micelles assumed an improved loading capacity and entrapment efficiency of the drug, a preferable drug‐release profiles without an initial burst release, and a low cytotoxicity. Therefore, they were more suitable for the loading and delivery of the hydrophobic drug as a controlled release drug carrier. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41877.     

Gating Characteristics of Thermo‐Responsive Membranes with Grafted Linear and Crosslinked Poly(N‐isopropylacrylamide) Gates

Thermo‐responsive porous membranes with grafted linear and crosslinked poly(N‐isopropylacrylamide) (PNIPAM) gates are successfully prepared at temperatures above and below the lower critical solution temperature (LCST) of PNIPAM by using a plasma‐induced grafting polymerization method, and the effects of operation pressure and grafting temperature on the thermo‐responsive gating characteristics of the prepared membranes are investigated systematically. The fluxes of water through the grafted membranes increase simply with increasing the operation pressure no matter whether the environmental temperature is 40 °C or 25 °C. Under high operation pressure (e.g., higher than 0.14 MPa), the grafted linear PNIPAM gates deform to a certain extent, whereas the grafted crosslinked PNIPAM gates do not deform. For both membranes with grafted linear and crosslinked PNIPAM gates, the membranes prepared at 25 °C (below the LCST of PNIPAM) show larger thermo‐responsive gating coefficients than those prepared at 40 °C (above the LCST of PNIPAM), which results from different distributions of grafted PNIPAM gates in the membrane pores. When the PNIPAM gates are grafted at 25 °C, the grafted layer near the membrane surface is much thicker than that inside the membrane pores; on the other hand, when the PNIPAM gates are grafted at 40 °C, the grafted layer is homogeneously formed throughout the whole pore length. Both linear and crosslinked grafted PNIPAM gates in the membrane pores exhibit stable and repeatable thermo‐responsive “open‐close” switch performances under the operation pressure of 0.26 MPa. The results in this study provide valuable guidance for designing, fabricating, and operating thermo‐responsive gating membranes with desirable performances.     

Phase behavior of temperature‐ and pH‐sensitive poly(acrylic acid‐g‐N‐isopropylacrylamide) in dilute aqueous solution

Several different composition temperature‐ and pH‐sensitive poly(acrylic acid‐g‐N‐isopropylacrylamide) (P(AA‐g‐NIPAM)) graft copolymers were synthesized by free‐radical copolymerization utilizing macromonomer technique. The phase behavior and conformation change of P(AA‐g‐NIPAM) in aqueous solutions were investigated by UV–vis transmittance measurements, fluorescence probe, and fluorescence quenching techniques. The results demonstrate that the P(AA‐g‐NIPAM) copolymers have temperature‐ and pH‐sensitivities, and these different composition graft copolymers have different lower critical solution temperature (LCST) and critical phase transition pH values. The LCST of graft copolymer decreases with increasing PNIPAM content, and the critical phase transition pH value increases with increasing Poly(N‐isopropylacrylamide) (PNIPAM) content. At room temperature (20°C), different composition of P(AA‐g‐NIPAM) graft copolymers in dilute aqueous solutions (0.001 wt %) have a loose conformation, and there is no hydrophobic microdomain formation within researching pH range (pH 3 ～ 10). In addition, for the P(AA‐g‐NIPAM) aqueous solutions, transition from coil to globular is an incomplete reversible process in heating and cooling cycles. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Structure and performance of poly(vinylidene fluoride) membrane with temperature‐sensitive poly(n‐isopropylacrylamide) homopolymers in membrane pores

The poly(vinylidene fluoride) (PVDF)/poly(N‐isopropylacrylamide) (PNIPAM) blend membranes with different PNIPAM contents are prepared by phase inversion of PNIPAM and PVDF in aqueous medium. The membranes are characterized by thermal gravimetric analyses, elemental analysis, Fourier transform infrared spectrometer, X‐ray photoelectron spectroscopy, and scanning electron microscope photographs. The results indicate that PNIPAM chains are largely distributed in membrane pore other than membrane surface, and furthermore, with the increase of PNIPAM content, the porous size, porosity, and water flux through the membrane increase, the hydrophilicity and antiprotein fouling are enhanced. The blend membrane exhibits temperature‐sensitive permeability to aqueous solutions, with the most drastic change being observed at the lower critical solution temperature (LCST) of PNIPAM (around 32°C). Below the LCST, the blend membrane shows a high protein rejection and a low water flux; above the LCST, the blend membrane shows a low protein rejection and a high water flux. POLYM. COMPOS., 2013. © 2013 Society of Plastics Engineers     

Synthesis of double‐hydrophilic poly(methylacrylic acid)–poly(ethylene glycol)–poly(methylacrylic acid) triblock copolymers and their micelle formation

The aim of the work reported was to synthesize a series of double‐hydrophilic poly(methacrylic acid)‐block‐poly(ethylene glycol)‐block‐poly(methacrylic acid) (PMAA‐b‐PEG‐b‐PMAA) triblock copolymers and to study their self‐assembly behavior. These copolymeric self‐assembly systems are expected to be potential candidates for applications as carriers of hydrophilic drugs. Bromo‐terminated difunctional PEG macroinitiators were used to synthesize well‐defined triblock copolymers of poly(tert‐butyl methacrylate)‐block‐poly(ethylene glycol)‐block‐poly(tert‐butyl methacrylate) via reversible‐deactivation radical polymerization. After the removal of the tert‐butyl group by hydrolysis, double‐hydrophilic PMAA‐b‐PEG‐b‐PMAA triblock copolymers were obtained. pH‐sensitive spherical micelles with a core–corona structure were fabricated by self‐assembly of the double‐hydrophilic PMAA‐b‐PEG‐b‐PMAA triblock copolymers at lower solution pH. Transmission electron microscopy and laser light scattering studies showed the micelles were of nanometric scale with narrow size distribution. Solution pH and micelle concentration strongly influenced the hydrodynamic radius of the spherical micelles (48–310 nm). A possible reason for the formation of the micelles is proposed. Copyright © 2010 Society of Chemical Industry