Surface Micro‐ and Nanoengineering: Applications of Layer‐by‐Layer Technology as a Versatile Tool to Control Cellular Behavior

Extracellular matrix (ECM) cues have been widely investigated for their impact on cellular behavior. Among mechanics, physics, chemistry, and topography, different ECM properties have been discovered as important parameters to modulate cell functions, activating mechanotransduction pathways that can influence gene expression, proliferation or even differentiation. Particularly, ECM topography has been gaining more and more interest based on the evidence that these physical cues can tailor cell behavior. Here, an overview of bottom‐up and top‐down approaches reported to produce materials capable of mimicking the ECM topography and being applied for biomedical purposes is provided. Moreover, the increasing motivation of using the layer‐by‐layer (LbL) technique to reproduce these topographical cues is highlighted. LbL assembly is a versatile methodology used to coat materials with a nanoscale fidelity to the geometry of the template or to produce multilayer thin films composed of polymers, proteins, colloids, or even cells. Different geometries, sizes, or shapes on surface topography can imply different behaviors: effects on the cell adhesion, proliferation, morphology, alignment, migration, gene expression, and even differentiation are considered. Finally, the importance of LbL assembly to produce defined topographical cues on materials is discussed, highlighting the potential of micro‐ and nanoengineered materials to modulate cell function and fate.     

Freestanding Nanostructures via Layer‐by‐Layer Assembly

Freestanding flexible nanocomposite structures fabricated by layer‐by‐layer (LbL) assembly are promising candidates for many potential applications, such as in the fields of thermomechanical sensing, controlled release, optical detection, and drug delivery. In this article, we review recent advances in the fabrication and characterization of different types of freestanding LbL structures in air and at air/liquid and liquid/liquid interfaces, including micro‐ and nanocapsules, microcantilevers, freely suspended membranes, encapsulated nanoparticle arrays, and sealed‐cavity arrays. Several recently developed fabrication techniques, such as spin‐assisted coating, dipping, and micropatterning, make the assembly process more efficient and impart novel physical properties to the freestanding films.     

Drug delivery: Layer‐By‐Layer‐Assembled Capsules and Films for Therapeutic Delivery (Small 17/2010)

Polymeric materials formed via layer‐by‐layer (LbL) assembly have promise for use as drug delivery vehicles. These multilayered materials, both as capsules and thin films, can encapsulate a high payload of toxic or sensitive drugs, and can be readily engineered and functionalized with specific properties. This review highlights important and recent studies that advance the use of LbL‐assembled materials as therapeutic devices. It also seeks to identify areas that require additional investigation for future development of the field. A variety of drug‐loading methods and delivery routes are discussed. The biological barriers to successful delivery are identified, and possible solutions to these problems are discussed. Finally, state‐of‐the‐art degradation and cargo release mechanisms are also presented.     

Automated Buildup of Biomimetic Films in Cell Culture Microplates for High‐Throughput Screening of Cellular Behaviors

An automatic method is established for layer‐by‐layer (LbL) assembly of biomimetic coatings in cell culture microplates using a commercial liquid‐handling robot. Highly homogeneous thin films are formed at the bottom of each microwell. The LbL film‐coated microplates are compatible with common cellular assays, using microplate readers and automated microscopes. Cellular adhesion is screened on crosslinked and peptide‐functionalized LbL films and stem cell differentiation in response to increasing doses of bone morphogenetic proteins (2, 4, 7, 9). This method paves the way for future applications of LbL films in cell‐based assays for regenerative medicine and high‐throughput drug screening.     

Humidity‐Responsive Single‐Nanoparticle‐Layer Plasmonic Films

2D materials possess many interesting properties, and have shown great application potentials. In this work, the development of humidity‐responsive, 2D plasmonic nanostructures with switchable chromogenic properties upon wetting–dewetting transitions is reported. By exploiting DNA hybridization‐directed anchoring of gold nanoparticles (AuNPs) on substrates, a series of single‐nanoparticle‐layer (SNL) plasmonic films is fabricated. Due to the collective plasmonic responses in SNL, these ultrathin 2D films display rapid and reversible red‐blue color change upon the wetting–dewetting transition, suggesting that hydration‐induced microscopic plasmonic coupling between AuNPs is replicated in the macroscopic, centimeter‐scale films. It is also found that hydration finely tunes the electric field distribution between AuNPs in the SNL film, based on which responsive surface‐enhanced Raman scattering substrates with spatially homogeneous hot spots are developed. Thus it is expected that DNA‐mediated 2D SNL structures open new avenues for designing miniaturized plasmonic nanodevices with various applications.     

Biomedical Applications of Layer‐by‐Layer Assembly: From Biomimetics to Tissue Engineering

The design of advanced, nanostructured materials at the molecular level is of tremendous interest for the scientific and engineering communities because of the broad application of these materials in the biomedical field. Among the available techniques, the layer‐by‐layer assembly method introduced by Decher and co‐workers in 1992 has attracted extensive attention because it possesses extraordinary advantages for biomedical applications: ease of preparation, versatility, capability of incorporating high loadings of different types of biomolecules in the films, fine control over the materials' structure, and robustness of the products under ambient and physiological conditions. In this context, a systematic review of current research on biomedical applications of layer‐by‐layer assembly is presented. The structure and bioactivity of biomolecules in thin films fabricated by layer‐by‐layer assembly are introduced. The applications of layer‐by‐layer assembly in biomimetics, biosensors, drug delivery, protein and cell adhesion, mediation of cellular functions, and implantable materials are addressed. Future developments in the field of biomedical applications of layer‐by‐layer assembly are also discussed.     

Single‐Stimulus‐Induced Modulation of Multiple Optical Properties

Stimuli‐responsive smart optical materials hold great promise for applications in active optics, display, sensing, energy conversion, military camouflage, and artificial intelligence. However, their applications are greatly restricted by the difficulty of tuning different optical properties within the same material, especially by a single stimulus. Here, magnetic modulations of multiple optical properties are demonstrated in a crystalline colloidal array (CCA) of magnetic nanorods. Small‐angle X‐ray scattering studies reveal that these nanorods form an unusual monoclinic crystal in concentrated suspensions. The CCA exhibits optical anisotropy in the form of a photonic bandgap and birefringence, thus enabling magnetic tuning of the structural color and transmittance at a rate of 50 Hz. As a proof‐of‐concept, it is further demonstrated that the fabrication of a multifunctional device for display, anticounterfeiting, and smart‐window applications based on this multiple magneto‐optical effect. The study not only provides a new model system for understanding colloidal assembly, but also opens up opportunities for new applications of smart optical materials for various purposes.     

Assembly and degradation of low-fouling click-functionalized poly(ethylene glycol)-based multilayer films and capsules

Nano-/micrometer-scaled films and capsules made of low-fouling materials such as poly(ethylene glycol) (PEG) are of interest for drug delivery and tissue engineering applications. Herein, the assembly and degradation of low-fouling, alkyne-functionalized PEG (PEG(Alk) ) multilayer films and capsules, which are prepared by combining layer-by-layer (LbL) assembly and click chemistry, are reported. A nonlinear, temperature-responsive PEG(Alk) is synthesized, and is then used to form hydrogen-bonded multilayers with poly(methacrylic acid) (PMA) at pH 5. The thermoresponsive behavior of PEG(Alk) is exploited to tailor film buildup by adjusting the assembly conditions. Using alkyne-azide click chemistry, PEG(Alk)/PMA multilayers are crosslinked with a bisazide linker that contains a disulfide bond, rendering these films and capsules redox-responsive. At pH 7, by disrupting the hydrogen bonding between the polymers, PEG(Alk) LbL films and PEG(Alk) -based capsules are obtained. These films exhibit specific deconstruction properties under simulated intracellular reducing conditions, but remain stable at physiological pH, suggesting potential applications in controlled drug release. The low-fouling properties of the PEG films are confirmed by incubation with human serum and a blood clot. Additionally, these capsules showed negligible toxicity to human cells.     

Two‐Dimensional Materials for Halide Perovskite‐Based Optoelectronic Devices

Halide perovskites have high light absorption coefficients, long charge carrier diffusion lengths, intense photoluminescence, and slow rates of non‐radiative charge recombination. Thus, they are attractive photoactive materials for developing high‐performance optoelectronic devices. These devices are also cheap and easy to be fabricated. To realize the optimal performances of halide perovskite‐based optoelectronic devices (HPODs), perovskite photoactive layers should work effectively with other functional materials such as electrodes, interfacial layers and encapsulating films. Conventional two‐dimensional (2D) materials are promising candidates for this purpose because of their unique structures and/or interesting optoelectronic properties. Here, we comprehensively summarize the recent advancements in the applications of conventional 2D materials for halide perovskite‐based photodetectors, solar cells and light‐emitting diodes. The examples of these 2D materials are graphene and its derivatives, mono‐ and few‐layer transition metal dichalcogenides (TMDs), graphdiyne and metal nanosheets, etc. The research related to 2D nanostructured perovskites and 2D Ruddlesden–Popper perovskites as efficient and stable photoactive layers is also outlined. The syntheses, functions and working mechanisms of relevant 2D materials are introduced, and the challenges to achieving practical applications of HPODs using 2D materials are also discussed.     

Biomimetic Extracellular Environment Based on Natural Origin Polyelectrolyte Multilayers

Surface modification of biomaterials is a well‐known approach to enable an adequate biointerface between the implant and the surrounding tissue, dictating the initial acceptance or rejection of the implantable device. Since its discovery in early 1990s layer‐by‐layer (LbL) approaches have become a popular and attractive technique to functionalize the biomaterials surface and also engineering various types of objects such as capsules, hollow tubes, and freestanding membranes in a controllable and versatile manner. Such versatility enables the incorporation of different nanostructured building blocks, including natural biopolymers, which appear as promising biomimetic multilayered systems due to their similarity to human tissues. In this review, the potential of natural origin polymer‐based multilayers is highlighted in hopes of a better understanding of the mechanisms behind its use as building blocks of LbL assembly. A deep overview on the recent progresses achieved in the design, fabrication, and applications of natural origin multilayered films is provided. Such films may lead to novel biomimetic approaches for various biomedical applications, such as tissue engineering, regenerative medicine, implantable devices, cell‐based biosensors, diagnostic systems, and basic cell biology.     

A Cut‐and‐Weld Process to 3D Architectures from Multiresponsive Crosslinked Liquid Crystalline Polymers

Crosslinked liquid crystalline polymers (CLCPs) have garnered extensive attention in recent years for their significant values in the design of light‐driven soft actuators. However, poor processabilities due to the insoluble and infusible crosslinked networks prevent their practical applications severely. In this study, a weldable azobenzene‐containing CLCP is designed with photo‐ and humidity‐responsive actuations, which enables a cut‐and‐weld process to 3D CLCP architectures. The tensile properties and stability are almost unchanged after welding, much better than those of the films pasted by common adhesive tapes. Meanwhile, the mechanisms of the welding process are clarified on the base of surface hydrogen bonding and further crosslinking. By taking advantage of the cut‐and‐weld process, a 3D “claw” integrated into a robotic arm is realized for grabbing millimeter‐scale objects by remote control. This work enhances significantly not only the processability of CLCP films but also the utilization of leftover pieces, which provides an efficient approach to create functional 3D structures from film precursors for the potential application in the smart materials.     

Robust Microcapsules with Controlled Permeability from Silk Fibroin Reinforced with Graphene Oxide

Robust and stable microcapsules are assembled from poly‐amino acid‐modified silk fibroin reinforced with graphene oxide flakes using layer‐by‐layer (LbL) assembly, based on biocompatible natural protein and carbon nanosheets. The composite microcapsules are extremely stable in acidic (pH 2.0) and basic (pH 11.5) conditions, accompanied with pH‐triggered permeability, which facilitates the controllable encapsulation and release of macromolecules. Furthermore, the graphene oxide incorporated into ultrathin LbL shells induces greatly reinforced mechanical properties, with an elastic modulus which is two orders of magnitude higher than the typical values of original silk LbL shells and shows a significant, three‐fold reduction in pore size. Such strong nanocomposite microcapsules can provide solid protection of encapsulated cargo under harsh conditions, indicating a promising candidate with controllable loading/unloading for drug delivery, reinforcement, and bioengineering applications.     

25th Anniversary Article: Dynamic Interfaces for Responsive Encapsulation Systems

Encapsulation systems are urgently needed both as micrometer and sub‐micrometer capsules for active chemicals' delivery, to encapsulate biological objects and capsules immobilized on surfaces for a wide variety of advanced applications. Methods for encapsulation, prolonged storage and controllable release are discussed in this review. Formation of stimuli responsive systems via layer‐by‐layer (LbL) assembly, as well as via mobile chemical bonding (hydrogen bonds, chemisorptions) and formation of special dynamic stoppers are presented. The most essential advances of the systems presented are multifunctionality and responsiveness to a multitude of stimuli – the possibility of formation of multi‐modal systems. Specific examples of advanced applications – drug delivery, diagnostics, tissue engineering, lab‐on‐chip and organ‐on‐chip, bio‐sensors, membranes, templates for synthesis, optical systems, and antifouling, self‐healing materials and coatings – are provided. Finally, we try to outline emerging developments.     

Physicochemical Properties of Surface‐Initiated Polymer Films in the Modification and Processing of Materials

This article reviews the physicochemical aspects of surface‐initiated polymer films used to modify planar and non‐planar surfaces and to produce micro‐ and nanoscale patterned features. Particular emphasis is placed on the molecular composition of the polymer and its effect on surface and bulk properties of ultrathin films. Recent advances in the use of responsive polymer films that exhibit dramatically altered properties upon changes in solvent, temperature, or ionic strength are reviewed. The uses of surface‐initiated polymer films to modify materials' properties and impact applications in chromatography, nanoparticle‐templated synthesis, and carbon nanotube dispersion are highlighted.     

Metal Ion‐Induced Self‐Assembly of a Multi‐Responsive Block Copolypeptide into Well‐Defined Nanocapsules

Protein cages are an interesting class of biomaterials with potential applications in bionanotechnology. Therefore, substantial effort is spent on the development of capsule‐forming designer polypeptides with a tailor‐made assembly profile. The expanded assembly profile of a triblock copolypeptide consisting of a metal ion chelating hexahistidine‐tag, a stimulus‐responsive elastin‐like polypeptide block, and a pH‐responsive morphology‐controlling viral capsid protein is presented. The self‐assembly of this multi‐responsive protein‐based block copolymer is triggered by the addition of divalent metal ions. This assembly process yields monodisperse nanocapsules with a 20 nm diameter composed of 60 polypeptides. The well‐defined nanoparticles are the result of the emergent properties of all the blocks of the polypeptide. These results demonstrate the feasibility of hexahistidine‐tags to function as supramolecular cross‐linkers. Furthermore, their potential for the metal ion‐mediated encapsulation of hexahistidine‐tagged proteins is shown.     

Exceptional Flame Resistance and Gas Barrier with Thick Multilayer Nanobrick Wall Thin Films

Layer‐by‐layer (LbL) assembly is a powerful and versatile technique to deposit functional thin films, but often requires a large number of deposition steps to achieve a film thick enough to provide a desired property. By incorporating amine salts into the cationic polyelectrolyte and its associated rinse, LbL clay‐containing nanocomposite films can achieve much greater thickness (>1 μm) with relatively few deposition cycles (≤6 bilayers). Amine salts interact with nanoclays, causing nanoplatelets to deposit in stacks rather than as individual platelets. This technique appears to be universal, exhibiting thick growth with multiple types of nanoclay, including montmorillonite and vermiculite (VMT), and a variety of amine salts (e.g., hexylamine and diethanolamine). The characteristic order found in LbL‐assembled films is maintained despite the incredible thickness. Films assembled in this manner achieve oxygen transmission rates below 0.009 cc m⁻² d⁻¹ atm⁻¹ with just 6 bilayers (BLs) of chitosan/VMT deposited. These thick clay‐based thin films also impart exceptional flame resistance. A 2‐BL film renders a 3.2 mm polystyrene plate self‐extinguishing, while an 8‐BL film (3.9 μm thick) prevents ignition entirely. This ability to generate much thicker clay‐based multilayers with amine salts opens up tremendous potential for these nanocoatings in real world applications.     

Higher Order Assembly of Virus‐like Particles (VLPs) Mediated by Multi‐valent Protein Linkers

Two‐ and three‐dimensional assembly of nanoparticles has generated significant interest because these higher order structures could exhibit collective behaviors/properties beyond those of the individual nanoparticles. Highly specific interactions between molecules, which biology exploits to regulate molecular assemblies such as DNA hybridization, often provide inspiration for the construction of higher order materials using bottom‐up approaches. In this study, higher order assembly of virus‐like particles (VLPs) derived from the bacteriophage P22 is demonstrated by using a small adaptor protein, Dec, which binds to symmetry specific sites on the P22 capsid. Two types of connector proteins, which have different number of P22 binding sites and different geometries (ditopic linker with liner geometry and tetratopic linker with tetrahedral geometry) have been engineered through either a point mutation of Dec or genetic fusion with another protein, respectively. Bulk assembly and layer‐by‐layer deposition of P22 VLPs from solution was successfully achieved using both of the engineered multi‐topic linker molecules, while Dec with only a single binding site does not mediate P22 assembly. Beyond the two types of linkers developed in this study, a wide range of different connector geometries could be envisioned using a similar engineering approach. This is a powerful strategy to construct higher order assemblies of VLP based nanomaterials.     

Thermo‐Switchable Materials Prepared Using the OEGMA‐Platform

We describe here the advantages of oligo(ethylene glycol)‐based (co)polymers for preparing thermoresponsive materials as diverse as polymer‐enzyme bio‐hybrids, injectable hydrogels, capsules for drug‐release, modified magnetic particles for in vivo utilization, cell‐culture substrates, antibacterial surfaces, or stationary phases for bioseparation. Oligo(ethylene glycol) methacrylates (OEGMAs) can be (co)polymerized using versatile and widely‐applicable methods of polymerization such as atom transfer radical polymerization (ATRP) of reversible addition‐fragmentation chain‐transfer (RAFT) polymerization. Thus, the molecular structure and therefore the stimuli‐responsive properties of these polymers can be precisely controlled. Moreover, these stimuli‐responsive macromolecules can be easily attached to–or directly grown from–organic, inorganic or biological materials. As a consequence, the OEGMA synthetic platform is today a popular option for materials design. The present research news summaries the progress of the last two years.     

A Mussel‐Inspired Persistent ROS‐Scavenging,Electroactive, and Osteoinductive Scaffold Based on Electrochemical‐Driven In Situ Nanoassembly

Conductive polymers are promising for bone regeneration because they can regulate cell behavior through electrical stimulation; moreover, they are antioxidative agents that can be used to protect cells and tissues from damage originating from reactive oxygen species (ROS). However, conductive polymers lack affinity to cells and osteoinductivity, which limits their application in tissue engineering. Herein, an electroactive, cell affinitive, persistent ROS‐scavenging, and osteoinductive porous Ti scaffold is prepared by the on‐surface in situ assembly of a polypyrrole‐polydopamine‐hydroxyapatite (PPy‐PDA‐HA) film through a layer‐by‐layer pulse electrodeposition (LBL‐PED) method. During LBL‐PED, the PPy‐PDA nanoparticles (NPs) and HA NPs are in situ synthesized and uniformly coated on a porous scaffold from inside to outside. PDA is entangled with and doped into PPy to enhance the ROS scavenging rate of the scaffold and realize repeatable, efficient ROS scavenging over a long period of time. HA and electrical stimulation synergistically promote osteogenic cell differentiation on PPy‐PDA‐HA films. Ultimately, the PPy‐PDA‐HA porous scaffold provides excellent bone regeneration through the synergistic effects of electroactivity, cell affinity, and antioxidative activity of the PPy‐PDA NPs and the osteoinductivity of HA NPs. This study provides a new strategy for functionalizing porous scaffolds that show great promise as implants for tissue regeneration.