Single‐Walled Carbon‐Nanotube Networks on Large‐Area Glass Substrate by the Dip‐Coating Method

Highly uniform and large‐area single‐walled carbon‐nanotube (SWNT) networks are realized by the dip‐coating method, which is based on fundamental fluid‐dynamic phenomena such as capillary condensation and surface tension. The changes in the polarity and hydration properties of the substrate affect the morphology of the SWNT networks and result in nonlinear growth of the networks in the repetitive dip‐coating process. The density and the thickness of the SWNT networks are controlled by processing variables including number of dip coatings, concentration of SWNT colloidal solution, and withdrawal velocity. The networks have uniform sheet resistances and high optical transmittance in the visible wavelength range.     

Single‐Step Assembly of Large‐Area,Transparent Conductive Patterns Induced Through Edge Adsorption of Template‐Confined Au‐Thiocyanate

Fabrication of patterned metallic films through chemical means is a primary objective in the emerging field of “bottom‐up” lithography. We present a simple technology for generating large area, highly uniform patterns of conductive gold microwires. The approach is based upon dissolution of a gold complex, Au(SCN)₄⁻, in an organic‐solvent/water mixture and confining the solution underneath polymeric molds. We show that Au(SCN)₄⁻ undergoes spontaneous crystallization/reduction, producing metallic Au microwires tracing the contours of the templates. Importantly, no shape‐directing molecules or reducing agents are required for Au microwire formation, as the thiocyanate ligands both donate the reducing electrons as well as direct the crystallization process of the Au patterns. We demonstrate application of the new technology for creating highly transparent conductive films.     

Highly Conductive and Transparent Large‐Area Bilayer Graphene Realized by MoCl5 Intercalation

Bilayer graphene (BLG) comprises a 2D nanospace sandwiched by two parallel graphene sheets that can be used to intercalate molecules or ions for attaining novel functionalities. However, intercalation is mostly demonstrated with small, exfoliated graphene flakes. This study demonstrates intercalation of molybdenum chloride (MoCl₅) into a large‐area, uniform BLG sheet, which is grown by chemical vapor deposition (CVD). This study reveals that the degree of MoCl₅ intercalation strongly depends on the stacking order of the graphene; twist‐stacked graphene shows a much higher degree of intercalation than AB‐stacked. Density functional theory calculations suggest that weak interlayer coupling in the twist‐stacked graphene contributes to the effective intercalation. By selectively synthesizing twist‐rich BLG films through control of the CVD conditions, low sheet resistance (83 Ω ?^?1) is realized after MoCl₅ intercalation, while maintaining high optical transmittance (≈95%). The low sheet resistance state is relatively stable in air for more than three months. Furthermore, the intercalated BLG film is applied to organic solar cells, realizing a high power conversion efficiency.     

Heterogeneous Integration of Carbon‐Nanotube–Graphene for High‐Performance,Flexible, and Transparent Photodetectors

Low‐dimensional carbon materials, such as semiconducting carbon nanotubes (CNTs), conducting graphene, and their hybrids, are of great interest as promising candidates for flexible, foldable, and transparent electronics. However, the development of highly photoresponsive, flexible, and transparent optoelectronics still remains limited due to their low absorbance and fast recombination rate of photoexcited charges, despite the considerable potential of photodetectors for future wearable and foldable devices. This work demonstrates a heterogeneous, all‐carbon photodetector composed of graphene electrodes and porphyrin‐interfaced single‐walled CNTs (SWNTs) channel, exhibiting high photoresponse, flexibility, and full transparency across the device. The porphyrin molecules generate and transfer photoexcited holes to the SWNTs even under weak white light, resulting in significant improvement of photoresponsivity from negligible to 1.6 × 10^?2 A W^?1. Simultaneously, the photodetector exhibits high flexibility allowing stable light detection under ≈50% strain (i.e., a bending radius of ≈350 µm), and retaining a sufficient transparency of ≈80% at 550 nm. Experimental demonstrations as a wearable sunlight sensor highlight the utility of the photodetector that can be conformally mounted on human skin and other curved surfaces without any mechanical and optical constraints. The heterogeneous integration of porphyrin–SWNT–graphene may provide a viable route to produce invisible, high‐performance optoelectronic systems.