共查询到20条相似文献,搜索用时 140 毫秒
1.
2.
3.
介绍了螺旋滚筒洗煤机的组成、结构,工艺流程及工作原理,针对存在的问题进行了分析,并采取了相应的技术改造。改造后经过长时间、多个洗煤厂的检验,解决了螺旋滚筒洗煤机存在的技术问题,提高了洗后煤的煤质,避免了矸石含煤并减少了跑货现象,增加了洗煤量及经济效益,使洗煤生产达到了正常。 相似文献
4.
5.
6.
7.
8.
9.
10.
11.
ACR对PVC加工性能的影响 总被引:1,自引:0,他引:1
详细研究了丙烯酸酯类PVC加工助剂———ACR的特性黏度、组成对PVC共混物加工性能的影响。结果表明,随着甲基丙烯酸甲酯用量的下降和丙烯酸丁酯用量的提高,其塑化速度增大,但熔体强度降低,在组成相同的情况下,特性黏度越大,塑化越慢,熔体强度越大;丙烯酸酯类加工助剂对PVC制品的拉伸强度和维卡软化点无明显影响,高黏度的加工助剂有提高PVC制品拉伸强度和维卡软化点的趋势。 相似文献
12.
《Journal of Adhesion Science and Technology》2013,27(4):573-589
Molecular mechanics modelling is used to calculate the energies of interaction, hence the molecular level energy of adhesion at the interface with crystalline cellulose I of three different photopolymerizable primers and of a polyester varnish at the interface with the primer/cellulose assembly. The energy of interactions for just one of the primers with the statistically most common conformation of amorphous cellulose has also been obtained for comparison. Experimental results of adhesion by a standard peel test and by thermomechanical analysis, in which the effect of viscoelastic energy dissipation by crack tip propagation has been respectively minimized or is not present, hence in which the energy of interfacial interaction is nothing else but the work of adhesion, correlated well with the energies of interaction calculated by molecular mechanics. An equation correlating the energy of interaction at each finish/cellulose interface with the deflection derived by thermomechanical analysis, and with the number of internal bond rotational degrees of freedom as well as the degree of networking of the finish, has been derived and is presented. A relationship between the intrinsic fracture energy Go and the molecular mechanics-derived energy of interaction at the interface equating this to the square of the work of adhesion is obtained and is presented. 相似文献
13.
Peter Wilding Peter J. Lillford Joe M. Regenstein 《Journal of chemical technology and biotechnology (Oxford, Oxfordshire : 1986)》1984,34(3):182-189
The measurement of functionality of protein food ingredients has developed somewhat haphazardly, probably due to the wide range of proteins used as ingredients and the diversity of foods. Studies of the physiochemical properties of proteins should enable prediction of a proteins response to process environments and prove more fruitful than many of the empirical measurements of functionality. The effects of pH, salt type and concentration on the phase behaviour of the oilseed globulin and arachin, demonstrates the complexity of protein solubility and the inadequacies of simple tests that have arisen. Studies of the effects of salts and conditioning on meat fibres, coupled with measurement of the location of water in pellets from water holding tests enable the latter to be applied with increased confidence. Comparison of the endothermic transitions observed on heating with the development of storage and loss moduli allow the contributions of domains of skeletal muscle myosin to gel structure to be investigated. 相似文献
14.
考察了添加剂CaB2O3对转炉铜渣中夹杂铜沉降效果的影响,并结合铜渣的粘度测试及红外光谱表征,研究其影响机理,采用FactSage软件计算了添加剂对铜渣液相线温度的影响。结果表明,随添加剂含量增大,铜渣中夹杂铜的沉降效果逐渐增强,添加剂含量由0增至6wt%时,底部渣含铜量由4.10wt%增至6.85wt%,这是由于添加剂可有效降低铜渣粘度。随添加剂含量增大,渣粘度降低,但降低效果随温度增大而趋于平缓。随添加剂含量增大,铜渣的硅酸盐结构趋于简化,添加剂通过破坏铜渣复杂的硅酸盐结构降低铜渣粘度。铜渣的液相线温度随添加剂含量增大而减小,添加剂通过减少渣中固体颗粒的方式降低铜渣粘度。 相似文献
15.
Aggregation pheromone system of adult gregarious desert locust schistocerca gregaria (forskal) 总被引:3,自引:0,他引:3
Baldwyn Torto Daniel Obeng-Ofori Peter G. N. Njagi Ahmed Hassanali Habert Amiani 《Journal of chemical ecology》1994,20(7):1749-1762
Six electrophysiologically active aromatic compounds, viz., anisole, benzaldehyde, veratrole, guaiacol, phenylacetonitrile, and phenol, were identified in the volatiles of older-adult male desert locust. Young adults and females of all age groups produced none or only trace quantities of these compounds. Comparison of the aggregation responses of young and older adults to the crude, older-adult, volatile extract and different synthetic blends of the six compounds showed that the aggregation pheromone system of the adult gregarious locust consists of phenylacetonitrile, guaiacol, phenol, and benzaldehyde. Like the crude volatile extract of older males, neither the synthetic blend of the six compounds nor the adult pheromone blend evoked any significant aggregation responses from nymphs. These results confirm our previous report of sexual differentiation in the production of adult aggregation pheromone in the desert locust and of the evidence of two distinct aggregation pheromone systems in the two stages of the insect. 相似文献
16.
针对某钢厂十流中间包紊流抑制器注流孔结构不合理引起流场分布差、各流铸坯质量不均的问题,运用相似原理,使用相似比为1:3的物理模型进行水模型实验,设计不同的注流孔结构研究流体在中间包的平均停留时间曲线及流场显示特征,明晰注流孔结构对中间包流场的影响规律,优化紊流抑制器注流孔结构,达到中间包流场优化及浸入式水口各流一致性提高的目标。结果表明,长距离多流中间包在无堰坝结构条件下,紊流抑制器的注流孔内径尺寸、数量及开孔方向对中间包流场都有影响,注流孔内径的影响最为显著,数量次之。设计的最佳注流孔内径由原型的53 mm缩小至30 mm,死区比例由54.05%降至34.69%,F曲线最大标准差由0.0154降低至0.0035,中间包流场得到改善,各流一致性显著提高。当注流孔数量由1个增加至3个,死区比例由34.69%增大至46.05%,F曲线最大标准差由0.0035增大到0.0062,注流孔数目越多,流场死区比例反而越大,各水口流场的一致性越差。对长距离多流中间包,建议主要通过适当改变注流孔内径及减少孔数来改善中间包流场,提高各流一致性。 相似文献
17.
为揭示非水平表面上微小蒸发液滴的传热传质特性,本文在准稳态模型的假设下构造三维液滴模型,综合考虑了蒸气扩散、蒸发冷却以及气相域中的自然对流这3种传输机理,对水平以及竖直基底上液滴的蒸发过程进行数值研究。通过分析气液界面上温度分布、蒸发通量分布及总蒸发率的变化,重点探究了基底过热度以及重力的改变对液滴蒸发特性的影响。结果表明:与水平基底上温度的对称分布不同,竖直基底上气液界面温度分布表现出明显的非对称性,且非对称性随基底过热度的升高而增强,最低温度点不再位于液滴顶点,而向一侧偏移。此外,水平基底上气液界面局部蒸发通量呈对称分布,各截面分布相似,而竖直基底上局部蒸发通量分布则呈现出显著的非对称性以及各截面异性,非对称性随着基底过热度的升高而增强,这是重力改变后气相域自然对流发生改变的结果。与水平基底相比,竖直基底上蒸发率更高,总蒸发时间更少。最后,基底由水平变为竖直时,液滴内部流场由对称双涡转变为非对称单涡,单涡流速显著大于双涡流速,液滴内流速随基底过热度的上升而增大,单涡环流造成了气液界面温度分布的改变以及最低温度点的偏移。 相似文献
18.
为了排除载体孔结构变化对催化性能的影响,研究了二氧化钛改性α-氧化铝载体对银催化剂催化乙烯环氧化反应性能的影响。研究结果表明,二氧化钛表面改性α-氧化铝载体对载体的比表面积、孔结构无明显影响;载体表面改性导致催化活性组分银在载体表面均匀分散,分散状况明显改善;经二氧化钛改性后载体表面与银的相互作用增强;对单负载银催化剂,由改性载体制备的银催化剂的活性和选择性均下降,改性对催化性能明显不利;对于共浸渍法制备的多组分银催化剂,低温焙烧对催化性能不利,而由经1000℃高温焙烧的二氧化钛改性载体制备的银催化剂的催化活性明显提高。研究表明,载体表面等电点降低及其与银的强相互作用是造成催化剂上金属银良好分散的主要原因;此外,银催化剂助剂的存在减弱了二氧化钛改性载体与银之间的强相互作用、抑制了环氧乙烷(EO)深度反应的活性,两者协同作用提升了多组分银催化剂的催化反应性能。 相似文献
19.
本工作利用聚结滤芯过滤性能实验装置,通过改变滤芯内部的滤材排布,研究了聚结层为单一滤材以及由不同滤材排布组合的滤芯过滤性能,分析了聚结层排布方式对过滤效率、压降、饱和度及液体分布的影响。结果表明,由单一滤材组成的滤芯过滤效率随滤材孔径减小而增大,但孔径最小时由于压降较高,导致滤芯综合过滤性能反而最差。疏油在前、亲油在后的聚结层排布方式可提高滤芯过滤效率、减少液滴二次夹带,且以两层相同滤材交错排列的滤芯过滤效率比单层滤材交错排列明显更高,压降也相对较低,使得综合过滤性能显著提升。继续增加进气侧的疏油滤材层数可延缓压降增长、提高运行寿命,滤芯稳态品质因子达到最大值(0.30 kPa-1)。聚结层排布方式对滤芯过滤性能的影响主要通过改变液体分布形式而实现,且末层滤材的通道结构变化是导致不同聚结层排布方式的滤芯过滤性能出现差异的主要原因。 相似文献
20.
以碳酸钙水相合成为模型反应,借助对流动反应过程的放大观测,从沉淀悬浮液的流变特性分析了液相沉淀反应在毫米级管式微通道中的流动行为特征以及通道堵塞的过程机理。结果表明,碳酸钙-水悬浮体系的黏度在低剪切速率下随固含率的增加而飙升,而反应通道堵塞的本质可归因于在壁面和流动主体区形成了固含率较高的局部高黏区,使流动性严重恶化。提高反应的流速加快了壁面沉积层和沉淀颗粒团聚体的形成,反而加快了堵塞;其中团聚体的形成远快于沉积层的积累,使团聚体的“架桥”虽晚于沉积层出现,却成为管路堵塞的主要因素。基于破坏流动壁面和主体的局部高黏区,设计了两种新型的微通道反应器模型,有可能为解决反应通道堵塞这一难题提供新的思路。 相似文献