Detection and identification of aqueous saccharides by using surface-enhanced Raman spectroscopy

The sensitive detection and characterization of carbohydrates by means of a strategy based on surface-enhanced Raman spectroscopy is demonstrated. Spectra are obtained after injecting a small amount of saccharide solution onto a roughened silver substrate, with subsequent deposition of silver colloid. The sensitivity achieved by this two-step approach enables high-quality Raman spectra to be obtained for small amounts of aqueous saccharides (5 microL of a 10(-2) M solution) utilizing minimal laser power and small signal acquisition times (a few seconds). Spectral "fingerprints" obtained for seven structurally similar monosaccharides demonstrate clearly an effective means by which each sugar can be identified. The application to more complex analyses is demonstrated for monosaccharide mixtures and a disaccharide, whereby the SERS fingerprints aid in the determination of components.     

Detection of alkaline phosphatase using surface-enhanced Raman spectroscopy

A new approach was developed to detect the activity of alkaline phosphatase (ALP) enzyme at ultralow concentrations using a surface-enhanced Raman scattering (SERS) technique. The approach is based on the use of gold nanoparticles as a SERS material whereas 5-bromo-4-chloro-3-indolyl phosphate (BCIP) is used as a substrate of ALP. The enzymatic hydrolysis of BCIP led to the formation of indigo dye derivatives, which were found to be highly SERS active. For the first time, we were able to detect ALP at a concentration of approximately 4 x 10(-15) M or at single-molecule levels when ALP was incubated with BCIP for 1 h in the Tris-HCl buffer. The same technique also was successfully employed to detect surface-immobilized avidin, and a detection limit of 10 ng/mL was achieved. This new technique allows the detection of both free and labeled ALP as a Raman probe in enzyme immunoassays, immunoblotting, and DNA hybridization assays at ultralow concentrations.     

Discrimination of bacteria and bacteriophages by Raman spectroscopy and surface-enhanced Raman spectroscopy

Detection of pathogenic organisms in the environment presents several challenges due to the high cost and long times typically required for identification and quantification. Polymerase chain reaction (PCR) based methods are often hindered by the presence of polymerase inhibiting compounds and so direct methods of quantification that do not require enrichment or amplification are being sought. This work presents an analysis of pathogen detection using Raman spectroscopy to identify and quantify microorganisms without drying. Confocal Raman measurements of the bacterium Escherichia coli and of two bacteriophages, MS2 and PRD1, were analyzed for characteristic peaks and to estimate detection limits using traditional Raman and surface-enhanced Raman spectroscopy (SERS). MS2, PRD1, and E. coli produced differentiable Raman spectra with approximate detection limits for PRD1 and E. coli of 10(9) pfu/mL and 10(6) cells/mL, respectively. These high detection concentration limits are partly due to the small sampling volume of the confocal system but translate to quantification of as little as 100 bacteriophages to generate a reliable spectral signal. SERS increased signal intensity 10(3) fold and presented peaks that were visible using 2-second acquisitions; however, peak locations and intensities were variable, as typical with SERS. These results demonstrate that Raman spectroscopy and SERS have potential as a pathogen monitoring platform.     

A practical method to fabricate gold substrates for surface-enhanced Raman spectroscopy

We describe a practical method of fabricating surface-enhanced Raman spectroscopy (SERS) substrates based on dip-coating poly-l-lysine derivatized microscope slides in a gold colloidal suspension. The use of only commercially available starting materials in this preparation is particularly advantageous, aimed at both reducing time and the inconsistency associated with surface modification of substrates. The success of colloid deposition has been demonstrated by scanning electron microscopy (SEM) and the corresponding SERS response (giving performance comparable to the corresponding traditional colloidal SERS substrates). Reproducibility was evaluated by conducting replicate measurements across six different locations on the substrate and assessing the extent of the variability (standard deviation values of spectral parameters: peak width and height), in response to either Rhodamine 6G or Isoniazid. Of particular interest is the observation of how some peaks in a given spectrum are more susceptible to data variability than others. For example, in a Rhodamine 6G SERS spectrum, spectral parameters of the peak at 775 cm(-1) were shown to have a relative standard deviation (RSD) % of <10%, while the peak at 1573 cm(-1) has a RSD of >/=10%. This observation is best explained by taking into account spectral variations that arise from the effect of a chemisorption process and the local nature of chemical enhancement mechanisms, which affects the enhancement of some spectral peaks but not others (analogous to resonant Raman phenomenon).     

Multiplexed microfluidic surface-enhanced Raman spectroscopy

Over the past few decades, surface-enhanced Raman spectroscopy (SERS) has garnered respect as an analytical technique with significant chemical and biological applications. SERS is important for the life sciences because it can provide trace level detection, a high level of structural information, and enhanced chemical detection. However, creating and successfully implementing a sensitive, reproducible, and robust SERS active substrate continues to be a challenging task. Herein, we report a novel method for SERS that is based upon using multiplexed microfluidics (MMFs) in a polydimethylsiloxane platform to perform parallel, high throughput, and sensitive detection/identification of single or various analytes under easily manipulated conditions. A facile passive pumping method is used to deliver Ag colloids and analytes into the channels where SERS measurements are done under nondestructive flowing conditions. With this approach, SERS signal reproducibility is found to be better than 7%. Utilizing a very high numerical aperture microscope objective with a confocal-based Raman spectrometer, high sensitivity is achieved. Moreover, the long working distance of this objective coupled with an appreciable channel depth obviates normal alignment issues expected with translational multiplexing. Rapid evaluation of the effects of anion activators and the type of colloid employed on SERS performance are used to demonstrate the efficiency and applicability of the MMF approach. SERS spectra of various pesticides were also obtained. Calibration curves of crystal violet (non-resonant enhanced) and Mitoxantrone (resonant enhanced) were generated, and the major SERS bands of these analytes were observable down to concentrations in the low nM and sub-pM ranges, respectively. While conventional random morphology colloids were used in most of these studies, unique cubic nanoparticles of silver were synthesized with different sizes and studied using visible wavelength optical extinction spectrometry, scanning electron microscopy, and the MMF-SERS approach.     

In vivo glucose measurement by surface-enhanced Raman spectroscopy

This paper presents the first in vivo application of surface-enhanced Raman scattering (SERS). SERS was used to obtain quantitative in vivo glucose measurements from an animal model. Silver film over nanosphere surfaces were functionalized with a two-component self-assembled monolayer, and subcutaneously implanted in a Sprague-Dawley rat such that the glucose concentration of the interstitial fluid could be measured by spectroscopically addressing the sensor through an optical window. The sensor had relatively low error (RMSEC = 7.46 mg/dL (0.41 mM) and RMSEP = 53.42 mg/dL (2.97 mM).     

Detection of drugs of abuse in saliva by surface-enhanced Raman spectroscopy (SERS)

Eighty drugs of abuse and metabolites were successfully measured by surface-enhanced Raman spectroscopy (SERS) using gold- and silver-doped sol-gels immobilized in glass capillaries. A method was developed that provided consistent detection of 50 ppb cocaine in saliva in a focused study. This general method was successfully applied to the detection of a number of additional drugs in saliva, such as amphetamine, diazepam, and methadone.     

Novel Ag-Cu substrates for surface-enhanced Raman scattering

Ag dendrites were deposited on rough Cu plate by a simple galvanic displacement process between Ag ion and Cu under room temperature. Surface-enhanced Raman scattering (SERS) performances have been studied using Rhodamine 6G (R6G) probe molecules on this kind of Ag-Cu substrates. The high SERS enhancements are attributed to the highly branched Ag dendritic nanostructures and Ag nanoparticles formed on the trunks, branches, and even leaves.     

Determination of technetium and its speciation by surface-enhanced Raman spectroscopy

Technetium-99 (Tc) is an important radionuclide of concern, and there is a great need for its detection and speciation analysis in the environment. For the first time, we report that surface-enhanced Raman spectroscopy (SERS) is capable of detecting an inorganic radioactive anion, pertechnetate (TcO4-), at approximately 10(-7) M concentration levels. The technique also allows the detection of various species of Tc such as oxidized Tc(VII) and reduced and possibly complexed Tc(IV) species by use of gold nanoparticles as a SERS substrate. The primary Raman scattering band of Tc(VII) occurs at about 904 cm-1, whereas reduced Tc(IV) and its humic and ethylenediaminetetraacetic acid (EDTA) complexes show scattering bands at about 866 and 870 cm-1, respectively. Results also indicate that Tc(IV)-humic complexes are unstable and reoxidize to TcO4- upon exposure to oxygen. This study demonstrates that SERS could potentially offer a new tool and opportunity in studying Tc and its speciation and interactions in the environment at low concentrations.     

Internal standard in surface-enhanced Raman spectroscopy

A method is presented for the use of SAM layers as internal standards for calibration in surface-enhanced Raman spectroscopy. Three cyano-containing compounds were attached to gold colloids via a metal-sulfur bond and evaluated for spectral stability and normalization capacity. The results show that the analyte, rhodamine 6G, and the internal standard signal enhancement covaried, and it was possible to quantify the analyte with PLS. The fact that the enhancing substrate was chaotic assemblies with large variation in signal enhancement shows the versatility of this method.     

Discrimination of bacteria using surface-enhanced Raman spectroscopy

Raman spectroscopy has recently been shown to be a potentially powerful whole-organism fingerprinting technique and is attracting interest within microbial systematics for the rapid identification of bacteria and fungi. However, while the Raman effect is so weak that only approximately 1 in 10(8) incident photons are Raman scattered (so that collection times are in the order of minutes), it can be greatly enhanced (by some 10(3)-10(6)-fold) if the molecules are attached to, or microscopically close to, a suitably roughened surface, a technique known as surface-enhanced Raman scattering (SERS). In this study, SERS, employing an aggregated silver colloid substrate, was used to analyze a collection of clinical bacterial isolates associated with urinary tract infections. While each spectrum took 10 s to collect, to acquire reproducible data, 50 spectra were collected making the spectral acquisition times per bacterium approximately 8 min. The multivariate statistical techniques of discriminant function analysis (DFA) and hierarchical cluster analysis (HCA) were applied in order to group these organisms based on their spectral fingerprints. The resultant ordination plots and dendrograms showed correct groupings for these organisms, including discrimination to strain level for a sample group of Escherichia coli, which was validated by projection of test spectra into DFA and HCA space. We believe this to be the first report showing bacterial discrimination using SERS.     

New surface-enhanced Raman spectroscopy substrates via self-assembly of silver nanoparticles for perchlorate detection in water

Perchlorate (ClO4-) has recently emerged as a widespread contaminant in drinking water and groundwater supplies in the United States, and a need exists for rapid detection and monitoring of this contaminant. In this study, surface-enhanced Raman spectroscopy (SERS) was studied as a means of ClO4- detection, and new sol-gel-based SERS substrates were developed by self-assembly of silver colloidal nanoparticles with various functionalized silane reagents. These substrate materials were tailored to allow detection of ClO4- in water with improved sorptivity, stability, and sensitivity and with the ability to detect ClO4- at concentrations as low as 10(-6) M (or 100 microg/L) with good reproducibility. Similar techniques were used to fabricate capillary SERS flow cells by assembling functionalized silver nanoparticles capable of attracting ClO4- to the SERS surface or the internal wall of glass capillaries. These capillary flow cells could be readily configured to allow for in situ, nondestructive detection of ClO4- via fiber optics.     

Electromigrated nanoscale gaps for surface-enhanced Raman spectroscopy

Single-molecule detection with chemical specificity is a powerful and much desired tool for biology, chemistry, physics, and sensing technologies. Surface-enhanced spectroscopies enable single-molecule studies, yet reliable substrates of adequate sensitivity are in short supply. We present a simple, scaleable substrate for surface-enhanced Raman spectroscopy (SERS) incorporating nanometer-scale electromigrated gaps between extended electrodes. Molecules in the nanogap active regions exhibit hallmarks of very high Raman sensitivity, including blinking and spectral diffusion. Electrodynamic simulations show plasmonic focusing, giving electromagnetic enhancements approaching those needed for single-molecule SERS.     

Silver-embedded zeolite crystals as substrates for surface-enhanced Raman scattering

This paper reports the preparation of a type of Ag-embedded zeolite crystals as surface-enhanced Raman spectroscopy (SERS) substrates by chemical reduction of Ag⁺-exchanged ZSM-5. Ag⁺ ions were loaded into the zeolite framework by ion exchange. Then the exchanged-Ag⁺ ions were reduced and metallic silver clusters formed inside the zeolite channel. The resulting Ag-embedded zeolite crystals are characterized by using a number of techniques including X-ray diffraction, scanning electron microscopy, and X-ray photoelectron spectroscopy to confirm silver formed inside the crystal channel. The fabricated Ag-embedded ZSM-5 zeolite substrates displayed strong and reproducible SERS activity for different Raman probe molecules such as Tris(2,2′-bipyridyl) ruthenium(II) chloride (RuBpy) and rhodamine 6G (R6G). Since silver embedded into the zeolite channel without changing the crystal surface property, the Ag–ZSM-5 zeolite crystal can be used to prepare different SERS-active substrate (SERS-tags), in which different probe molecules may be detected. Such Ag-embedded zeolite substrate would be useful in chemical and biological sensing and in the development of SERS-based analytical devices.     

A nanoforest structure for practical surface-enhanced Raman scattering substrates

A nanoforest structure for surface-enhanced Raman scattering (SERS) active substrates is fabricated and analyzed. The detailed morphology of the resulting structure can be easily controlled by modifying the process parameters such as initial gold layer thickness and etching time. The applicability of the nanoforest substrate as a label-free SERS immunosensor is demonstrated using influenza A virus subtype H1N1. Selective binding of the H1N1 surface antigen and the anti-H1 antibody is directly detected by the SERS signal differences. Simple fabrication and high throughput with strong in-plane hot-spots imply that the nanoforest structure can be a practical sensing component of a chip-based SERS sensing system.     

Silver-coated zeolite crystal films as surface-enhanced Raman scattering substrates

Silver-coated zeolite A and zeolite NaX crystal films prepared by vacuum deposition were investigated as surface-enhanced Raman scattering (SERS) substrates. The substrates were active for the enhancement of Raman scattering from uranyl ions. A detection limit of 10(-5) M for uranyl was obtained using silver-coated zeolite A films. One advantage of these zeolite-based substrates is that the negatively charged microporous framework provides the selectivity for adsorption based on static electric charges. The SERS effects of positively charged uranyl ions and neutrally charged benzoic acid were compared. For the zeolite A substrate, there was a 100-times-greater sensitivity.     

Flexible surface-enhanced Raman scattering-active substrates based on nanofibrous membranes

Surface-enhanced Raman scattering (SERS) has emerged as an excellent analytical tool for the effective detection and fingerprint identification of various chemicals. Recently, significant progress has been made in the fabrication of SERS-active substrates using simple, inexpensive, and affordable methods. The full potential of universal SERS diagnostics will likely be realized with the development of approaches and devices capable of effectively detecting analytes on various surfaces as well as in multicomponent media. In addition, the combination of implantable or wearable SERS-active substrates and remote portable devices enables real-time diagnostics that ideally fit the concept of personalized medicine. In this paper, we summarize recent achievements in fabricating flexible SERS substrates made of cellulose paper, polymer membranes, and textile fibrous films. Emphasis is placed on the in-situ extraction and detection of various chemicals in real-world surfaces and complex media using flexible nanofibrous SERS platforms. The potential SERS applications and future perspectives in on-site diagnostics are also discussed.

Open image in new window

     

Multilayer enhanced gold film over nanostructure surface-enhanced Raman substrates

We have developed a novel class of gold multilayer, surface-enhanced Raman scattering (SERS) substrates that are capable of enhancing SERS signals by 15.3-fold over conventional gold film over nanostructure (GFON) SERS substrates, making them comparable in sensitivity to optimized silver film over nanostructure (SFON) substrates, while providing the long-term stability obtained from gold. They are fabricated by depositing 10 A thick silver oxide islands on conventional GFON substrates, followed by deposition of a second continuous gold layer. The silver oxide layer acts as a dielectric spacer between the two continuous gold films and produces significantly enhanced SERS signals, as compared to optimized single layer substrates of the same geometry or comparable substrates prepared by deposition of silver islands that are not oxidized. In addition to the enhanced sensitivity of these multilayer substrates, they also exhibit long SERS active shelf-lives (i.e., months), with no measurable degradation in SERS enhancement, and relative standard deviations in SERS enhancement of less than 5.2% across the substrate's surface.     

Ultraviolet-visible and surface-enhanced Raman scattering spectroscopy studies on self-assembled metalloporphyrin films on organic monolayer-modified ultra-thin silver substrates

A self-assembled monolayer (SAM) film of 5,10,15,20-tetra-(para-chlorophenyl)-porphyrin terbium (or lutetium) hydroxy compound (TbOH/LuOH) fabricated on a silver substrate premodified with a SAM of 4-mercaptopyridine (PySH) was studied by ultraviolet-visible (UV-Vis) spectroscopy and surface-enhanced Raman scattering (SERS) spectroscopy. PySH can modify the substrate and deliver its pyridyl group pointing out from the silver surface. Thus, we can investigate the effects of the central metals of the metalloporphyrins in the formation of the composite films. For the TbOH-PySH composite film, a new absorption band arising from TbOH appears at 425 nm, and a band at 512 nm due to the PySH-modified silver substrate shifts to a longer wavelength (538 nm). The results suggest that TbOH is successfully assembled on the top of PySH-modified silver film and that there is an interaction between TbOH and PySH in the film. The frequency shifts and relative intensity changes of bands due to PySH in the SERS spectra imply the coordination of the pyridyl group on Tb in the SAM. As for the LuOH-PySH composite film, its SERS spectrum shows bands arising from both the LuOH and PySH moieties, indicating that LuOH is assembled on the PySH-modified silver film. Furthermore, a band at 1221 cm(-1) due to the in-plane C-H bending mode of PySH disappears, implying that the pyridyl moiety of PySH becomes more parallel to the silver surface upon the formation of the LuOH-PySH composite film. Additionally, an absorption band at 515 nm shifts to a longer wavelength (541 nm) and becomes broad upon the formation of the composite film, suggesting an interaction between LuOH and PySH in the film. By comparing the spectral changes between the two self-assembled composite films, we find that the central metal is crucial in the formation of the composite films. The structure and orientation of the composite films depend on the central metal of the metalloporphyrin compounds.