DELIXI牌变频调速器喜获杭州名牌产品

德力西（杭州）变频器有限公司一直致力于变频器的研究和开发,并结合国际上先进的变频技术和国内用户的实际需求,先后推出了CD19100-SL系列变频器、CD19100-S系列变频器、CD19200系列变频器、CD19200-ZY系列变频器、CD19800系列变频器、     

中国高压变频器技术应用现状

高压变频器是相对于380V、660V等电压等级的低压变频器而言的。我国工矿企业把1000V以上的交流电动机例如3kV、6kV、10kV等交流电机都称为高压电动机,对应用于这类电动机的变频器都称为高压变频器,国外则把这种电压等级的变频器称为中压变频器。我们研究的产品是将690V以上的变频器都称为高压变频器。     

推介产品

西门子MicroMaster 420多功能标准变频器；Vacon芬兰瓦萨CX系列变频器；AB PowerFlex 7000高压变频器；艾默生EV2000变频器；富士FUJI G11系列变频器；三菱FR-A500变频器；东元Speecon 7200MA矢量型变频器；利德华福HARSVERT-A系列高压变频器；微能WIN-HV系列高压变频器；阿尔法抽油机专用型变频器；科姆龙KV2000无感矢量变频器。     

变频器的温升及其试验方法探讨

变频器越来越广泛在电机系统节能和提高工艺起到重要作用,变频器的工作环境以及散热问题,对变频器的可靠性的影响是非常大的。本文分析了变频器发热的主要原因,并重点介绍了变频器的温升重点部位及试验方法,以利于变频器用户掌握了解变频器温升及温升试验。     

燕宾课堂 小孙学变频 第七章 变频器里的开关电源

正1从变频器的控制框图说起小孙说:"以前主要考虑如何用好变频器,掌握变频器的主电路也就可以了。但要修理变频器,必须涉及到变频器的内部控制电路,我打开变频器一看,觉得实在太复杂了,一时摸不着头绪。"张老师说:"要摸到变频器内部控制电路的头绪,必须首先要弄清楚这控     

推介产品

西门子标准变频器MicroMaster 440；Vacon CX/CXL/CXS系列变频器；丹佛斯VLT^R2800系列变频器；艾默生标准型变频器TD1000；安川变频器VS mini 37；三菱FR-V540（L）系列变频器；FUJI G11系列变频器；时代TVF2000系列变频器     

SPWM变频器FR-A540在数控机床上的应用

本文从SPWM变频器结构原理,FR-A540变频器,FR-A540变频器在数控机床的应用三个方面介绍了PWM变频器的结构、工作原理;FR-A540变频器的性能、接线端子;FR-A540变频器在数控机床的应用;来供广大电气同行参考使用。     

浅谈ABB ACS800变频器在采煤机中的应用

ABB变频器控制采煤机牵引电机,实现两个电机的同步、变频器的CANOPEN通讯、以及通过CANOPEN总线调整变频器参数与监控变频器运行状态。介绍变频器参数意义、设置方法、注意事项等方面。     

中等功率通用型变频器电路设计要点分析

随着变频器在现代工业中的广泛应用,变频器技术的研究也越来越受到重视。变频器电路是变频器中的重要组成部分,因此,对变频器电路的研究有着重要的意义。本文主要介绍了中等功率通用变频器电路设计三个方面的关键技术;主电路、IGBT驱动电路和控制电路。     

推介产品

AB PowerFlex 400系列变频器；丹佛斯690V系列VLT变频器；7200HA NEHA4防水防尘专用型变频器；Vaeon CX系列变频器；艾默生EV2000变频器；富士FUJI G11系列变频器；安川Varispeed G7变频器；日立SJ200系列变频器；……     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

电磁兼容检测实验室测试系统相符性比对研究

电磁兼容测试结果与检测实验室可靠性程度直接相关,检测实验室自身质量是保证电磁兼容测试结果准确性先决条件,检测实验室测试系统相符性则成为电磁兼容系统性能评估中需要考虑的关键内容和重要指标。因此,检测实验室测试系统相符性比对是实现电磁兼容系统评估研究的基础工作之一。本文首先针对电磁兼容检测实验室测试系统相符性比对的特点,结合自己几年来的测试实践论述了电磁兼容检测实验室测试系统相符性对比方案,然后提出了具体的案例同时进行了详细的分析,最后总结出了影响电磁兼容检测实验室测试系统相符性因素,整个案例和分析过程及结果可作为电磁兼容检测实验室测试系统相符性比对的手段和依据,具有重要的现实指导意义。     

Resolution Enhancement Technology:Integrated Process Solutions using OPC

DUV lithography, using the 248 nm wavelength, is a viable manufacturing option for devices with features at 130 nm and less. Given the low kl value of the lithography, integrated process development is a necessary method for achieving acceptable process latitude. The application of assist features for rule based OPC requires the simultaneous optimization of the mask, illumination optics and the resist.Described in this paper are the details involved in optimizing each of these aspects for line and space imaging.A reference pitch is first chosen to determine how the optics will be set. The ideal sigma setting is determined by a simple geometrically derived expression. The inner and outer machine settings are determined, in turn,with the simulation of a figure of merit. The maximum value of the response surface of this FOM occurs at the optimal sigma settings. Experimental confirmation of this is shown in the paper.Assist features are used to modify the aerial image of the more isolated images on the mask. The effect that the diffraction of the scattering bars (SBs) has on the image intensity distribution is explained. Rules for determining the size and placement of SBs are also given.Resist is optimized for use with off-axis illumination and assist features. A general explanation of the material' s effect is discussed along with the affect on the through-pitch bias. The paper culminates with the showing of the lithographic results from the fully optimized system.     

圆球微腔对水蒸汽的敏感特性仿真实验研究

研究了圆球微腔在水蒸汽传感中应用的可行性。通过测试在有/无水蒸汽的气室环境下,圆球微腔透射光谱的变化来对气室水蒸汽浓度情况进行传感测试。仿真实验结果显示:在有无水蒸汽干扰的条件下系统输出光强有明显的变化,即研制基于圆球微腔的传感器是可行的。     

量化秩非参数CFAR检测器在杂波边缘中的性能分析

人们常用均匀背景、多目标和杂波边缘3种典型背景来衡量雷达目标检测器的性能,但在现有文献中缺乏量化秩（Rank Quantization,RQ）非参数检测器在杂波边缘中虚警概率的理论模型,缺乏RQ非参数检测器与经典的参量型检测器在杂波边缘中虚警控制能力的比较.本文给出了RQ检测器在杂波边缘中虚警概率的解析表达式,并比较了它与非相干积累CA （Cell Averaging）,GO （Greatest Of）,OS （Ordered Statistic）恒虚警方法在杂波边缘中的虚警控制能力.可以看出,采用高秩量化门限的RQ检测器的虚警控制能力要优于低秩量化门限的情况,在瑞利分布杂波边缘情况下,RQ检测器的虚警控制能力与非相干积累OS方法接近.但是当强杂波变为长拖尾分布的非高斯杂波时,非相干积累CA,GO和OS参量型检测方法的虚警概率产生了3个数量级以上的上升,且不能降回到原始设定的虚警概率.而RQ检测器显示出了非参量检测器的优势,即当杂波背景的分布类型发生变化后,它仍然可以保持虚警概率的恒定.     

一种改善LED背光亮度均匀性的新型反射膜研究

在LCD的LED背光腔体的底面设计了新型曲面形状及性能的反光膜,将扩散膜反射回灯腔底部的光重新反射回出光口以改善亮度均匀性能;在侧面设计了镜面反射膜,将位于LED矩阵边缘区域由LED射向灯腔侧壁的光反射重新射向出光口,增加了LED背光边缘区域的亮度,从而改善了背光边缘区域较暗的亮度不均匀状况.根据此类反射膜的设计完成了反射膜的制备,并应用于38 cm LED背光源样品.测试结果显示,设置反射膜的LED背光的亮度均匀性值为10.2%,明显优于未设置反射膜的值16.8%,亮度提高了29%左右,表明该种新型反射膜可以提高亮度并改善亮度均匀性.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Study of waveguide coupling efficiency in hybrid silicon lasers

This paper presents a new method to increase the waveguide coupling efficiency in hybrid silicon lasers. We find that the propagation constant of the InGaAsP emitting layer can be equal to that of the Si resonant layer through improving the design size of the InP waveguide. The coupling power achieves 42% of the total power in the hybrid lasers when the thickness of the bonding layer is 100 nm. Our result is very close to 50% of the total power reported by Intel when the thickness of the thin bonding layer is less than 5 nm. Therefore, our invariable coupling power technique is simpler than Intel＇s.     

5-DOF混联雕刻机速度运动学分析及仿真

五自由度混联机器人因为兼有串联机器人和并联机器人的优点而成为重要的研究方向。在对五自由度并串联雕刻机控制的过程中,求解其输入与末端位置之间的速度及加速度的传递是研究的重点和难点。文中先通过机构拓扑理论对雕刻机的自由度进行分析,再运用矢量法对雕刻机末端运动学进行正向分析,然后采用求导法对雕刻机滑块运动学进行逆向分析,最终通过MATLAB和ADAMS仿真分析验证了雕刻机速度运动学分析的合理性以及算法的有效性。该结果为五自由度混联机器人的实际控制编程提供了参考。     

Design and nonlinearity compensation of Fabry-Perot type tunable optical filters for dynamic strain sensing systems

The collected spectrum of the fiber Bragg grating （FBG） and the loss of the detected optical power are discussed with respect to the 3-dB bandwidth of a Fabry-Perot （F-P） type tunable optical filter （TOF）, respectively. And the optimized parameters of the TOF are obtained consequently. It is demonstrated that the relationship between the transmission wave- length of the TOF and its drive voltage is nonlinear. A new method to compensate the nonlinearity of the TOF is proposed. The linear sweeping of the transmission wavelength of the TOF is achieved through modifying the drive voltage using interpolation algorithm. It is observed that the average error and the maximum error of the transmission wavelength are reduced sharply under linear fit. The dynamic strain sensing is realized by use of a reference FBG and moving averaging algorithm in this system.