Contribution of Structure to Temperature Dependence of Resonant Frequency in the (1 −x)La(Zn1/2Ti1/2)O3·xATiO3 (A = Ca, Sr) System

The crystal structure and microwave dielectric properties of the (1 − x ) La(Zn_1/2Ti_1/2)O₃· x SrTiO₃ and (1 − x )La(Zn_1/2Ti_1/2)O₃· x CaTiO₃ system were investigated. X-ray powder diffraction showed that cation ordering disappeared at x > 0.3 for both systems. However, infrared spectra demonstrated that short-range cation ordering could exist at x = 0.4. Permittivity and the temperature coefficient of the resonant frequency (τ_f) of both systems exhibited nonmonotonic variations with composition. Both systems exhibited a τ_f of zero at the same composition of x = 0.5 although the τ_f of SrTiO₃ was about two times larger than that of CaTiO₃. The behavior of the permittivity and τ_f were described by the tilting of oxygen octahedra and cation ordering. The relation between τ_f and cation ordering of La(Zn_1/2Ti_1/2)O₃ was discussed in conjunction with the experimental results on metal halides. It is suggested that cation ordering induced a negative τ_f and suppressed the increase of permittivity for compositions between x = 0 to x = 0.5 for (1 − x )La(Zn_1/2Ti_1/2)O₃· x SrTiO₃ and (1 − x )La(Zn_1/2Ti_1/2)O₃· x CaTiO₃ systems.     

Structure-Property Phase Diagram of BaZrxTi1−xO3 System

In the course of searching environmental friendly lead-free relaxor ferroelectrics a complete phase diagram of barium zirconate titanate, Ba(Zr _x Ti_{1− x} )O₃ system with compositions 0.00≤ x ≤1.00 has been developed based on their dielectric behavior. It has been shown that BaZr _x Ti_{1− x} O₃ system depending on the composition, successively depicts the properties extending from simple dielectric (pure BaZrO₃) to polar cluster dielectric, relaxor ferroelectric, second order like diffuse phase transition, ferroelectric with pinched phase transitions and then to a proper ferroelectric (pure BaTiO₃). A comprehensive structure–property correlation of BaZr _x Ti_{1− x} O₃ ceramics has been studied to understand the various ferroelectric phenomena in the whole phase diagram.     

High-Dielectric-Constant and Low-Loss Microwave Dielectric in the (1−x)Nd(Zn1/2Ti1/2)O3–xSrTiO3 System with a Zero Temperature Coefficient of Resonant Frequency

High-dielectric-constant and low-loss ceramics in the (1− x )Nd(Zn_1/2Ti_1/2)O₃– x SrTiO₃ system have been prepared by the conventional mixed-oxide route and their microwave dielectric properties have been investigated. A two-phase system was confirmed by the X-ray diffraction patterns, the energy-dispersive X-ray spectrometer analysis, and the measured lattice parameters. Addition of SrTiO₃, having a much smaller grain size in comparison with that of Nd(Zn_1/2Ti_1/2)O₃, could effectively hold back abnormal grain growth in the Nd(Zn_1/2Ti_1/2)O₃ matrix. Evaporation of Zn at high temperatures caused an increase in the dielectric loss of the system. The temperature coefficient of resonant frequency increases with increasing SrTiO₃ content and tunes through zero at x =0.52. Specimens with x =0.52 possessed an excellent combination of microwave dielectric properties: ɛ_r∼54.2, Q × f ∼84 000 GHz, and τ_f∼0 ppm/°C. It is proposed as a suitable candidate material for today's 3G passive components and small-sized GPS patch antennas.     

Methane Oxidation on Perovskite-Type Ca(Mn1−xTix)O3−δ

X-ray photoelectron spectroscopy was performed to elucidate the catalytic activity of CH₄ oxidation on perovskite-type Ca(Mn_{1− x} Ti _x )O_3−δ synthesized at 1173 K in a flow of oxygen from a gel with citric acid and ethylene glycol. The Mn ion content decreases and the ratio of the Mn³⁺ ion in the Mn ion increases with increases in x . Ca(Mn_{1− x} Ti _x )O_3−δ has a high catalytic activity of CH₄ oxidation at x =0.4. These results indicate that the catalytic activity strongly depends on the Mn³⁺ ion content of the surface.     

Effects of Ca/Ti Cosubstitution upon Microwave Dielectric Characteristics of CaSmAlO4 Ceramics

(Ca_{1+ x} Sm_{1− x} )(Al_{1− x} Ti _x )O₄ (0≤ x ≤0.4) ceramics were synthesized by solid-state reaction method and their microstructures and microwave dielectric properties were investigated. X-ray diffraction analysis and energy-dispersive X-ray analysis indicated that the matrix phase was a solid solution with a composition represented by the chemical formula (Ca_{1+ x} Sm_{1− x} ) (Al_{1− x} Ti _x )O₄ and minor amount of (Ca,Sm)(Al,Ti)O₃ secondary phase was detected. Ca/Ti cosubstitution could significantly improve the microwave dielectric characteristics of CaSmAlO₄ ceramics, and the excellent microwave dielectric characteristics were obtained in the modified ceramics as ɛ_r=19–23, Q × f =49 100–118 700 GHz, and τ_f=−15–15 ppm/°C.     

Crossover of Ba(Ti,Y)O3 Solid Solutions to Ba3Ti2YO8.5–BaTiO3 Composites and their Dielectric Properties

Ceramic samples with the nominal composition (1− x ) BaTiO₃+ x Ba₃Ti₂YO_8.5 ( x =0−0.535) were prepared by the mixed oxide method. X-ray diffraction (XRD) analysis shows that the materials are of single phase with a cubic symmetry as x ≤0.16. The compositions of the solid solutions ( x ≤0.16) can be expressed equivalently as Ba(Ti_{1− y} Y _y )O_3−δ ( y ≤0.122, y = x /(1+2 x )). For x >0.16, the materials are diphasic composites consisting of Ba(Ti_{1− y} Y _y )O₃ ( y =0.122) and Ba₃Ti₂YO_8.5. The microstructure observation by scanning electron microscopy supports the XRD result. The dielectric behavior and phase transitions of the solid solutions ( x ≤0.16) vary with different Y concentrations. The dielectric constant of the composites ( x >0.16) follows approximately the Lichteneker relation in a wide temperature range.     

Microwave Dielectric Properties of (1−x)(Na1/2Nd1/2)TiO3−xLa(Mg1/2Ti1/2)O3 via Ordering and Far IR Reflectivity Spectra

Microwave dielectric properties of (1− x )(Na_1/2Nd_1/2)TiO₃(NNT)− x La(Mg_1/2Ti_1/2)O₃(LMT) system have been investigated with focus on structural ordering and far IR reflectivity spectra. A single perovskite phase was found to exist with various superlattice reflections over the entire compositional range. 1:1 ordering observed in the (111) reflection of X-ray diffraction patterns was found to progress significantly in the specimens above x =0.8. The ordering characteristics that presumably related to B-site Mg/Ti ordering were assumed to affect favorably the quality factor at microwave frequencies. The increase of the quality factor also could be explained in terms of the decrease of lattice anharmonicity with LMT by analysis of far IR reflectivity spectra. As expected from the values of pure NNT and LMT, the dielectric constant and the temperature coefficient of frequency tended to gradually decrease with increasing LMT content.     

Bismuth/Samarium Cosubstituted Ba6−3xNd8+2xTi18O54 Microwave Dielectric Ceramics

Modification of the microwave dielectric properties in Ba_{6−3 x} Nd_{8+2 x} Ti₁₈O₅₄ ( x = 0.5) solid solutions by Bi/Sm cosubstitution for Nd was investigated. A large increase in the dielectric constant and near-zero temperature coefficient combined with high Qf values were obtained in modified Ba_{6−3 x} Nd_{8+2 x} Ti₁₈O₅₄ solid solutions where an enlarged solid solution limit of Bi in Ba_{6−3 x} Nd_{8+2 x} Ti₁₈O₅₄ was observed. Excellent microwave dielectric characteristics (ɛ= 105, Qf = 4110 GHz, and very low τ_f) were achieved in the composition Ba_{6−3 x} (Nd_0.7Bi_0.18Sm_0.12)_{8+2 x} Ti₁₈O₅₄.     

Structure–Property Relations in xBaTiO3–(1−x)La(Mg1/2Ti1/2)O3 Solid Solutions

The microwave dielectric properties and microstructures of compounds in the solid solution series x BaTiO₃–(1− x )La(Mg_1/2Ti_1/2)O₃ (BTLMT) have been investigated. The structural phase transitions that occur as a function of x have been studied and are related to changes in the dielectric properties. For compounds where x ≤ 0.1, X-ray diffraction (XRD) showed evidence of 1:1 ordering between Mg and Ti cations. For x ≤ 0.3, XRD and electron diffraction revealed that compounds were tilted in both antiphase and in-phase. However, for 0.3 < x < 0.7, only antiphase tilting was present. The temperature coefficient of resonant frequency (τ_f) vs the relative permittivity (ɛ_r) was linear until x = 0.5 at which point in the solid solution the transition to a nontilted structure resulted in nonlinear behavior. τ_f values close to zero (−2 ppm/°C) were achieved at x = 0.5 (ɛ_r∼ 60), which had a quality factor ( Q · f _o) of 9600 GHz.     

Characteristics of High-Q Microwave Dielectric Ceramics Nd(Co1/2Ti1/2)O3 With CuO Addition

We report the microwave dielectric properties and the microstructures of Nd(Co_1/2Ti_1/2)O₃ ceramics prepared by the conventional solid-state route. The prepared Nd(Co_1/2Ti_1/2)O₃ exhibits a mixture of Co and Ti showing a 1:1 order in the B site. Lowering the sintering temperature (as low as 1260°C) and promoting the densification of Nd(Co_1/2Ti_1/2)O₃ ceramics could be effectively achieved by adding CuO (up to 0.75 wt%). At 1350°C, Nd(Co_1/2Ti_1/2)O₃ ceramics with 0.5 wt% CuO addition possess a dielectric constant (ɛ_r) of 27.6, a Q × f value of 165 000 GHz (at 9 GHz), and a temperature coefficient of resonant frequency (τ_f) of −20 ppm/°C. By comparing with pure Nd(Co_1/2Ti_1/2)O₃ ceramics, incorporating additional CuO helps to render a dielectric material with a higher dielectric constant, a smaller τ_f value, and a 20% dielectric loss reduction, which makes it a very promising candidate for applications requiring low microwave dielectric loss.     

Effect of V2O5 Doping on the Sintering and Dielectric Properties of M-Phase Li1+x−yNb1−x−3yTix+4yO3 Ceramics

The effect of the addition of V₂O₅ on the structure, sintering and dielectric properties of M -phase (Li_{1+ x − y} Nb_{1− x −3 y} Ti _x +4 _y )O₃ ceramics has been investigated. Homogeneous substitution of V⁵⁺ for Nb⁵⁺ was obtained in LiNb_{0.6(1− x )}V_{0.6 x} Ti_0.5O₃ for x ≤ 0.02. The addition of V₂O₅ led to a large reduction in the sintering temperature and samples with x = 0.02 could be fully densified at 900°C. The substitution of vanadia had a relatively minor adverse effect on the microwave dielectric properties of the M -phase system and the x = 0.02 ceramics had [alt epsilon]_r= 66, Q × f = 3800 at 5.6 GHz, and τ_f= 11 ppm/°C. Preliminary investigations suggest that silver metallization does not diffuse into the V₂O₅-doped M -phase ceramics at 900°C, making these materials potential candidates for low-temperature cofired ceramic (LTCC) applications.     

High Piezoelectric and Dielectric Properties of La-Doped 0.3Pb(Zn1/3Nb2/3)O3–0.7Pb(ZrxTi1−x)O3 Ceramics Near Morphotropic Phase Boundary

La-doped 0.3Pb(Zn_1/3Nb_2/3)O₃–0.7Pb(Zr _x Ti_{1− x} )O₃ ( x =0.5–0.53) piezoelectric ceramics with pure perovskite phase were synthesized by a two-step hot-pressing route. The piezoelectric properties of various compositions near the morphotropic phase boundary (MPB) were systematically investigated. Not only was the exact MPB of this system determined via X-ray diffractometry analysis, but also the peak of piezoelectric properties was found near the MPB. The optimum piezoelectric properties of this series were observed in the specimen with Zr/Ti=51/49. The piezoelectric coefficient ( d ₃₃) and electromechanical coupling factor ( k _p) were 845 pC/N and 0.70, respectively, which have not been reported in this system so far. Large permittivity (ɛ_r=4088) and permittivity maximum (ɛ_m=29 500) were also obtained for the poled specimens. The temperatures ( T _max) of the permittivity maxima ranged from 206° to 213°C with various Zr/Ti ratios.     

Factors Determining Grain Orientation in Bismuth Sodium Potassium Titanate–Lead Zirconate Titanate Solid Solutions Made by the Reactive Templated Grain Growth Method

Grain-oriented Bi_0.5(Na_0.85K_0.15)_0.5TiO₃-Pb(Zr_{1− x} Ti _x )O₃ (BNKT-PZT) ceramics were prepared via the reactive templated grain growth method, using platelike Bi₄Ti₃O₁₂ particles. Factors that determine the degree of orientation were examined. Prereacted PZT gave a larger degree of orientation than PZT raw materials (PbO, ZrO₂, and TiO₂) in the 75BNKT-25PZT ( x = 0.5) system. Increases in the titanium concentration in the PZT of the 75BNKT-25PZT system and in the BNKT concentration in the y BNKT-(100 − y )PZT ( x = 0.5) system increased the degree of orientation. The direction of material transport between BNKT and PZT was important to obtain ceramics with a large degree of orientation.     

Porous Glass-Ceramics with a Skeleton of the Fast-Lithium-Conducting Crystal Li1+xTi2−xAlx(PO4)3

Porous glass-ceramics with a skeleton of the fast-lithium-conducting crystal Li_{1+ x} Ti_{2− x} Al _x (PO₄)₃ (where x = 0.3–0.5) were prepared by crystallization of glasses in the Li₂O─CaO─TiO₂─Al₂O₃–P₂O₅ system and subsequent acid leaching of the resulting dense glass-ceramics composed of the interlocking of Li_{1+ x} Ti_{2− x} Al _x (PO₄)₃ and β-Ca₃(PO₄)₂ phases. The median pore diameter and surface area of the resulting porous Li_{1+ x} Ti_{2− x} Al _x (PO₄)₃ glass-ceramics were approximately 0.2 μm and 50 m²/g, respectively. The electrical conductivity of the porous glass-ceramics after heating in LiNO₃ aqueous solution was 8 × 10⁻⁵ S/cm at 300 K or 2 × 10⁻² S/cm at 600 K.     

Compositional Dependence of Microwave Dielectric Properties in (1 −x)(Na1/2Nd1/2)TiO3−xNd(Mg1/2Ti1/2)O3 Ceramics

The compositional dependence of microwave dielectric properties has been investigated in the (1 − x )(Na_1/2Nd_1/2)TiO₃− x Nd(Mg_1/2Ti_1/2)O₃ (NNT-NMT) system. The addition of NMT results in significant improvement in the quality factor and the temperature coefficient of frequency, but gradually decreases the dielectric constant from ∼100 for pure NNT to ∼25 for pure NMT. The single perovskite phase is observed with various { hkl } superlattice reflections over the entire compositional range. The increasing tendency of peak splitting with increasing x at some perovskite reflections strongly suggests that the crystal structure of the system changes to lower symmetry structures. This is confirmed using infrared reflectivity spectra. The superlattice reflections related to structural deviation become more predominant as the composition reaches pure NMT. Particularly, {111} superlattice reflections are believed to be associated with the 1:1 cation ordering and responsible for the observed abrupt increase in quality factor at x > 0.7.     

A- and B Site Cosubstituted Ba6−3xSm8+2xTi18O54Microwave Dielectric Ceramics

Tin (Sn) substitution into the B-site and Nd/Sn cosubstitution into the A- and B-sites were investigated in a Ba _{6−3 x} Sm_{8+2 x} Ti₁₈O₅₄solid solution ( x = 2/3). A small amount of tin substitution for titanium improved the temperature coefficient of resonant frequency (τ_f) but led to a decrease of the relative dielectric constant (ɛ) and the quality factor ( Qf ). The Ba_{6−3 x} Sm_{8+2 x} (Ti_{1− z} Sn_z)₁₈O₅₄-based tungsten-bronze phase became unstable for compositions with a tin content of ≥10 mol%, where BaSm₂O₄and Sm₂(Sn,Ti)₂O₇appeared, and finally, these phases became the major phases. On the other hand, Nd/Sn cosubstitution led to a good combination of high ɛ, high Qf , and near-zero τ_f. Excellent microwave dielectric properties were achieved in Ba_{6−3 x} (Sm_{1− y} Nd _y )_{8+2 x} (Ti_{1− z} Sn _z )₁₈O₅₄ceramics with y = 0.8 and z = 0.05 sintered at 1360°C for 3 h: ɛ= 82, Qf = 10 000 GHz, and calculated τ_f=+17 ppm/°C. The tolerance factor and electronegativity difference exhibited important effects on the microwave dielectric properties, especially the Qf value. A large tolerance factor and high electronegativity difference generally led to a higher Qf value.     

Electromechanical Properties of Pb(Yb1/2Nb1/2)O3-PbZrO3-PbTiO3 Ceramics

The electromechanical and electric-field-induced strain properties of x Pb(Yb_1/2Nb_1/2)O₃· y PbZrO₃·(1− x − y )PbTiO₃ ( x = 0.12, 0.25, 0.37; y = 0.10–0.40) ceramics have been studied systematically as a function of Pb(Yb_1/2Nb_1/2)O₃ (PYN) content and PbZrO₃/PbTiO₃ (PZ/PT) ratio. In addition, the effect of MnO₂ on the electromechanical properties of 0.12Pb(Yb_1/2Nb_1/2)O₃·0.40PbZrO₃·0.48PbTiO₃ was also investigated. The maximum transverse strain values of 1.6 × 10⁻³ for x = 0.12, 1.45 × 10⁻³ for x = 0.25, and 1.36 × 10⁻³ for x = 0.37 were obtained at the compositions which were regarded as the morphotropic phase boundary (MPB). The transverse strain was maximized at the MPB composition. The value of the maximum electromechanical coupling coefficient was 0.69 for y = 0.40 and x = 0.12 composition. In the 0.12Pb(Yb_1/2Nb_1/2)O₃·0.40PbZrO₃·0.48PbTiO₃ composition, the temperature of the maximum dielectric constant decreased and the grain size increased with an addition of MnO₂. The electromechanical coupling coefficient decreased while the mechanical quality factor rapidly increased with an addition of MnO₂. These resulted mainly from the acceptor effect of manganese ions that were produced by doping MnO₂ into the perovskite structure.     

The Li2O–Nb2O5–TiO2 Composite Microwave Dielectric Ceramics with Adjustable Permittivities

A group of new y M-phase/(1− y ) Li_{2+ x} Ti_{1−4 x} Nb_{3 x} O₃ composite ceramics with adjustable permittivities for low-temperature co-fired ceramic applications was initially investigated in the study. The 0.5 M-phase/0.5 Li_{2+ x} Ti_{1−4 x} Nb_{3 x} O₃ ( x =0.01, 0.02, 0.04, 0.06, 0.081) composite ceramics were first investigated to find the appropriate "Li₂TiO₃ss" composition ( x value). The best dielectric properties of ɛ_r=40.1, Q × f values up to 9318 GHz, τ_f=25 ppm/°C, were obtained for the ceramics composites at x =0.02. Based on the good dielectric properties, the suitable "Li₂TiO₃ss" composition with x =0.02 was mixed with the Li_1.0Nb_0.6Ti_0.5O₃ powder as the ratio of y "M-phase"/(1− y ) "Li₂TiO₃ss" ( y =0.2, 0.4, 0.5, 0.6, 0.8). By adjusting the y values, the group of composite ceramics could exhibit largely are adjustable permittivities varying from ∼20 to ∼60, while Q × f and τ_f values relatively good. Nevertheless, in this study, because there are interactions between the M-phase and Li₂TiO₃ss during sintering process, their microwave dielectric properties could not be predicted precisely by the empirical model.     

Dielectric and Electrical Conductivity Properties of PMS–PZT Ceramics

The dielectric and electrical conductivity properties of x Pb(Mn_1/3Sb_2/3)O₃–(1− x )Pb(Zr_0.52Ti_0.48)O₃ (PMS–PZT) ceramics were studied. X-ray diffraction indicated that all samples exhibit a single-phase perovskite structure. Dielectric study revealed that the dielectric relaxor behavior was induced by co-doping Mn²⁺ and Sb⁵⁺ into Pb(Zr_0.52Ti_0.48)O₃ ceramics. Electrical conductivity measurements showed that the concentration of carriers are increased with the increase in PMS contents. After annealing in an oxygen atmosphere for 30 h, the direct current conductivity of PMSZ15 was much lower than that of the as-sintered sample. The reason why this phenomenon occurs may be the reduction of oxygen-vacancy concentration.