TiO2 nanotubes for hydrogen generation by photocatalytic water splitting in a two-compartment photoelectrochemical cell

Highly ordered TiO₂ nanotube arrays for hydrogen production have been synthesized by electrochemical anodization of titanium sheets. Under solar light irradiation, hydrogen generation by photocatalytic water splitting was carried out in the two-compartment photoelectrochemical cell without any external applied voltage. The hydrogen gas and oxygen generated on Pt side and on TiO₂ nanotubes side respectively were efficiently separated. The effect of anodization time on the morphology structures, photoelectrochemical properties and hydrogen production was systematically investigated. Due to more charge carrier generation and faster charge transfer, a maximum photoconversion efficiency of 4.13% and highest hydrogen production rate of 97 μmol h⁻¹cm⁻² (2.32 mL h⁻¹cm⁻²) were obtained from TiO₂ nanotubes anodized for 60 min.     

Effect of anodization voltage on performance of TiO2 nanotube arrays for hydrogen generation in a two-compartment photoelectrochemical cell

Highly ordered TiO₂ nanotube arrays were prepared by anodic oxidation of Ti foil under different anodization voltages in ethylene glycol electrolyte. The morphology and photoelectrochemical performance of the TiO₂ nanotubes (NTs) samples were characterized by FESEM and electrochemical working station. Hydrogen production was measured by splitting water in the two-compartment photoelectrochemical (PEC) cell without any external applied voltage or sacrificial agent. The results indicated that anodization voltage significantly affects morphology structures, photoelectrochemical properties and hydrogen production of TiO₂ NTs. The pore diameter and layer thickness of TiO₂ samples increased linearly with the anodization voltage, which led to the enhancement of active surface area. Accordingly, the photocurrent response, photoconversion efficiency and hydrogen production of TiO₂ nanotubes were also linearly correlated with the anodization voltage.     

TiO2 photoanodes for electrically enhanced water splitting

Photoelectrochemical properties of self-organized TiO₂ nanotubes formed by electrochemical anodization of titanium sheets and their working mechanism are investigated. Formation and growth of self-organized nanotubes were carried out by Titanium anodization in acid electrolyte containing fluorides. Annealing of the samples was performed in order to increase the crystallinity of the material. Also some results obtained with samples annealed in Nitrogen atmosphere are presented. Electrochemical Impedance Spectroscopy was used to give an interpretation of the main charge transfer processes that occur at the nanotube/electrolyte interphase. The use of glycerol as hole scavenger was considered in order to improve the photoelectrochemical performance of the samples.     

Iron doped nanostructured TiO2 for photoelectrochemical generation of hydrogen

This paper describes the photoelectrochemical studies on nanostructured iron doped titanium dioxide (TiO₂) thin films prepared by sol-gel spin coating method. Thin films were characterized by X-ray diffraction, Raman spectroscopy, spectral absorbance, atomic force microscopy and photoelectrochemical (PEC) measurements. XRD study shows that the films were polycrystalline with the photoactive anatase phase of TiO₂. Doping of Fe in TiO₂ resulted in a shift of absorption edge towards the visible region of solar spectrum. The observed bandgap energy decreased from 3.3 to 2.89 eV on increasing the doping concentration upto 0.2 at.% Fe. 0.2 at.% Fe doped TiO₂ exhibited the highest photocurrent density, ∼0.92 mA/cm² at zero external bias. Flatband potential and donor density determined from the Mott–Schottky plots were found to vary with doping concentration from −0.54 to −0.92 V/SCE and 1.7 × 10¹⁹ to 4.3 × 10¹⁹ cm⁻³, respectively.     

Functionalization of TiO2 nanotubes with palladium nanoparticles for hydrogen sorption and storage

The use of hydrogen as an energy carrier is an attractive solution toward addressing global energy issues and reducing the effects of climate change. Design of new materials with high hydrogen sorption capacity and high stability is critical for hydrogen purification and storage. In this study, titanium dioxide nanotubes (TiO₂NTs) were modified with palladium nanoparticles (PdNPs) utilizing a facile photo-assisted chemical deposition approach. Electrochemical anodization was employed for the direct growth of TiO₂NTs. The PdNP functionalized TiO₂NTs (TiO₂NT/Pd) were characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD). The hydrogen sorption behaviours and stability of the TiO₂NT/Pd nanocomposites were investigated and compared with nanoporous Pd networks that were deposited on a bulk titanium substrate (Ti/Pd) using cyclic voltammetry (CV) and chronoamperometry (CA). Our studies show that the TiO₂NT/Pd nanocomposites possess a much higher hydrogen storage capacity, faster kinetics for hydrogen sorption and desorption, and higher stability than the nanoporous Pd.     

Design of TiO2 nanotube array-based water-splitting reactor for hydrogen generation

A water-splitting reactor yielding hydrogen and oxygen was designed with a titanium oxide (TiO₂) nanotube array photoelectrode vertically grown on a titanium substrate. The TiO₂ nanotube arrays were made by the method of anodization and annealed in an oxygen atmosphere. Hydrogen gas was collected from the reactor and the exact amount of hydrogen gas evolved from the photoanode was analyzed. The relationship between the amount of hydrogen evolution and three key factors, viz. the tube length, tube structure and crystal structure, was investigated.     

Photoelectrochemical water splitting for hydrogen generation on highly ordered TiO2 nanotubes fabricated by using Ti as cathode

Sonication assisted anodization of titanium in a fluorinated ethylene glycol and water electrolyte using Ti itself as a cathode is investigated. The prepared anodic film has a highly ordered nanotube-array surface architecture. The resulting TiO₂ nanotubes at potential 20-40 V have various diameters (30-100 nm), tube length (3-12 μm) and wall thicknesses (6-15 nm). The tube diameter and wall thickness are increased with the anodization time while the overall length of the nanotube arrays is controlled by the duration of the anodization time. In addition, apart from the anodization time, formation of nanotubes is governed by the distance and supplied voltages between the two electrodes, for a given electrolyte. The crystal structure and surface morphology of the annealed anodic films are investigated by XRD and SEM, respectively. The corresponding photoelectrochemical water splitting efficiency (PCE) was calculated under UV light. Our results show a very high PCE under UV (315-400 nm, 100 mW/cm²) irradiation. The maximum value of PCE for hydrogen generation obtained was 29% which is one of the best results reported in literature [1].     

Influence of Pt deposition on water-splitting hydrogen generation by highly-ordered TiO2 nanotube arrays

Highly-ordered TiO₂ nanotube arrays (TNTAs) were fabricated on Ti sheets by electrochemical anodization. Uniform Pt nanoparticles with an average diameter of 3 nm could be successfully located on the TiO₂ nanotubes on only one side (Pt/TNTAs) or both sides of the Ti sheet (Pt/TNTAs/Pt). Pt/TNTAs, the single-sided Pt deposited TNTAs, could be directly used to split water without a counter electrode. The hydrogen evolution rate can reach 120 μmol h⁻¹ cm⁻² in a mixed solution of 0.5 M Na₂SO₄ and 0.5 M ethylene glycol without any applied bias, which is six times of that by the pure TNTAs. In comparison to the traditional three electrode system, this single-sided Pt deposited TNTAs is a much more simple and efficient water splitting system. Meanwhile, the photoelectrical conversion mechanism has been investigated in detail.     

Efficient photocatalytic hydrogen generation by Pt modified TiO2 nanotubes fabricated by rapid breakdown anodization

Photo-assisted hydrogen generation studies of platinum loaded titanium (IV) oxide nanotubes suspended in ethanol–water mixture were carried out at room temperature. The TiO₂ nanotubes synthesized by rapid breakdown anodization technique were loaded with Pt nanoparticles by chemical reduction of aqueous chloroplatinic acid solution using sodium borohydride. The chemisorption (active) surface area of the synthesized nanocomposites for hydrogen was measured by pulse chemisorption method using temperature programmed desorption reduction oxidation equipment and found to decrease with increase in platinum loading in the range 1–10 wt%. The platinum supported nanotube composites were characterized for phase and morphology by XRD, TEM and SEM. The hydrogen generated by the photocatalytic reduction of water from water–ethanol mixture at different wavelengths of incident light, using the Pt-TiO₂ nanocomposite photocatalyst, was determined by using a proton exchange membrane based hydrogen meter. The highest hydrogen generation efficiency was observed at 1–2.5 wt% of Pt loading. The maximum photocatalytic hydrogen generation of 0.03 mol/h/g of Pt-TiO₂ was observed with a 64 W UV light source (λ = 254 nm). The photoluminescence property of the Pt loaded TiO₂ has been correlated with the hydrogen generation efficiency and the reaction mechanism briefly discussed.     

Photoelectrochemical water splitting on highly smooth and ordered TiO2 nanotube arrays for hydrogen generation

To improve the photoelectrochemical (PEC) water splitting efficiency for hydrogen production, we reported the fabrication of lotus-root-shaped, highly smooth and ordered TiO₂ nanotube arrays (TiO₂ NTs) by a simple and effective two-step anodization method. The TiO₂ NTs prepared in the two-step anodization process (2-step TiO₂ NTs) showed better surface smoothness and tube orderliness than those of TiO₂ NTs prepared in one-step anodization process (1-step TiO₂ NTs). Under illumination of 100 mW/cm² (AM 1.5, simulated solar light) in 1 M KOH solution, water was oxidized on the 2-step TiO₂ NTs electrode with higher efficiency (incident-photon-to-current efficiency of 43.4% at 360 nm and photocurrent density of 0.90 mA/cm² at 1.23 V_RHE) than that on the 1-step TiO₂ NTs electrode. The effective photon-to-hydrogen conversion efficiency was found to be 0.18% and 0.49% for 1-step TiO₂ NTs and 2-step TiO₂ NTs, respectively. These results suggested that the structural smoothness and orderliness of TiO₂ NTs played an important role in improving the PEC water splitting application for hydrogen generation.     

Photo-induced reforming of alcohols with improved hydrogen apparent quantum yield on TiO2 nanotubes loaded with ultra-small Pt nanoparticles

Photo-induced reforming of methanol, ethanol, glycerol and phenol at room temperature for hydrogen production was investigated with the use of ultra-small Pt nanoparticles (NPs) loaded on TiO₂ nanotubes (NTs). The Pt NPs with diameters between 1.1 and 1.3 nm were deposited on TiO₂ NTs by DC-magnetron sputtering (DC-MS) technique. The photocatalytic hydrogen rate achieved an optimum value for a loading of about 1 wt% of Pt. Apparent quantum yield for hydrogen generation was measured for methanol and ethanol water solutions reaching a maximum of 16% under irradiation with a wavelength of 313 nm in methanol/water solution (1/8 v/v). Pt NPs loaded on TiO₂ NTs represented also a true water splitting catalyst under UV irradiation and pure distilled water. DC-MS method appears to be a technologically simple, ecologically benign and potentially low-cost process for production of an efficient photocatalyst loaded with ultra-small NPs with precise size control.     

TiO2 nanotubes coupled with nano-Cu(OH)2 for highly efficient photocatalytic hydrogen production

Noble-metal-free Cu(OH)₂/TNTs (TNTs: TiO₂ nanotubes) nanocomposite photocatalysts were successfully prepared by loading nano-Cu(OH)₂ on TNTs via a hydrothermal-precipitation process. These were then characterized in terms of morphology and physicochemical properties by employing TEM, XRD, XPS, BET, UV–Vis DRS and PL. The effects of Cu(OH)₂ loading, amount of catalyst on the photocatalytic hydrogen production performance of Cu(OH)₂/TNTs were investigated in detail in aqueous methanol solution under UV irradiation. The results show that, compared with pure TNTs, the TNTs loaded with highly dispersed 8 wt% Cu(OH)₂ exhibited remarkably improved activity for hydrogen production (the largest quantity of evolved hydrogen was ca. 14.94 mmol h⁻¹ g⁻¹ catalyst) with good photostability. This high activity is attributed to the strong synergistic function of Cu(OH)₂/TNTs, including suitable potential of Cu(OH)₂/Cu (E⁰ = −0.222 V) between conduction band (−0.260 V) of TNTs and the reduction potential of H⁺/H₂ (E⁰ = 0.000 V), a unique tubular microstructure of TNTs coated with nano-Cu(OH)₂, large BET specific surface area and high dispersion of Cu(OH)₂. Furthermore, a process mechanism for methanol/water decomposition over Cu(OH)₂/TNTs is proposed to understand its high activity.     

A novel TiO2/PVC layer for use in a photoelectrochemical cell

Titanium dioxide (TiO₂) has been widely used with UV light to degrade organic waste contaminants. Immobilised layers of TiO₂ on electrode surfaces have shown enhanced activity when appropriate potentials have been applied. In this work, it is shown that a novel immobilised layer of TiO₂ on an electrode, a TiO₂/poly(vinylchloride) composite cast from THF, mineralises acetone or starch when exposed to a xenon arc light only if the electrode is connected to a Pt electrode where concomitant reduction of oxygen occurs. When an isolated electrode with an immobilised TiO₂ layer is exposed to UV light in a solution of starch or acetone, no decrease in acetone or starch concentration is observed.     

Single crystalline TiO2 nanorods with enhanced visible light activity for solar hydrogen generation

Single crystalline TiO₂ nanorods and polycrystalline nanotubes were fabricated with same length to investigate the effects of their nanostructures on photocatalytic properties for splitting water. In order to enhance the visible light absorbance, TiO₂ nanorods and nanotubes were sensitized with semiconductor nanoparticles such as CdS, CdSe, and CdS/CdSe, and compared in viewpoint of solar hydrogen generation. It was observed that single-crystalline nanorods showed superior photocatalytic properties to polycrystalline nanotubes, and also the potential level of the nanorods with rutile phase was measured as lower than that of the nanotubes with mixture of anatase and rutile. Further improvement of photo-conversion efficiency was obtained by subsequent heat treatments of the sensitized photoelectrodes. It turns out that the improvement is attributed to the improved crystallinity and the increased size of the nanoparticles during the post-annealing treatments. It was demonstrated that TiO₂ nanorods with lower potential level and a single crystalline phase on FTO glass were advantageous for effective charge injection from the sensitized nanoparticles and transport without recombination lost at grain boundaries.     

Synthesis of highly-ordered TiO2 nanotubes for a hydrogen sensor

Highly-ordered, vertically oriented TiO₂ nanotubes are synthesized, and their hydrogen sensing properties are investigated. Self-organized TiO₂ nanotube arrays are grown by anodic oxidation of a titanium foil in an aqueous solution that contains 1 wt% hydrofluoric acid at 20 °C. We use a potential ramp at a rate of 100 mV s⁻¹, increasing from the initial open-circuit potential (OCP) to 20 V, and this final potential of 20 V is then held constant during the anodization process. The fabricated TiO₂ nanotubes are approximately 1 μm in length and 90 nm in diameter. For the sensor measurements, two platinum pads are used as electrodes on the TiO₂ nanotube arrays. The hydrogen sensing characteristics of the sensor are analyzed by measuring the sensor responses ((I − I₀)/I₀) in the temperature interval of 20–150 °C. We find that the sensitivity of the sensor is approximately 20 for 1000 ppm H₂ exposure at room temperature, and increases with increasing temperature. The sensing mechanism of the TiO₂ nanotube sensor could be explained with chemisorption of H₂ on the highly active nanotube surface.     

Enhancement of photoelectrochemical response by Au modified in TiO2 nanorods

We report on the design and synthesis of a novel Au/TiO₂/Au heterostructure and its implementation as a photoanode for photoelectrochemical (PEC) application. The Au/TiO₂/Au heterostructure was produced by assembling Au nanoparticles and TiO₂ nanorods (NRs) onto FTO substrate, followed by electrodepositing Au nanoparticles on the TiO₂NRs. Field emission scanning electron microscopy (FESEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and electrochemical methods were adopted to characterize the prepared photoanodes. Compared to the system involving Au nanoparticles directly linked to TiO₂, this Au/TiO₂/Au heterostructure exhibits significant improved photoresponse as a photoanode, as demonstrated good performance in PECs. This study illustrates the importance of pre-deposited Au underlayers in influencing PEC properties of hybrid assembled nanostructures. As the Au/TiO₂NRs/Au photoanodes are easily fabricated and highly stable, Au/TiO₂NRs/Au can serve as a good substitution for TiO₂ in a variety of solar energy driven applications including PEC water splitting, photocatalysis, and solar cells.     

Optimization of surface charge transfer processes on rutile TiO2 nanorods photoanodes for water splitting

Electrochemical impedance spectroscopy (EIS) has been performed to investigate the photocatalytic properties of titanium dioxide nanorods in a photoelectrochemical water splitting system. A two-channel transmission line model has been proposed to interpret the frequency response of the main charge transfer processes that occur at nanorod/electrolyte and platinum/electrolyte interfaces. EIS was then employed to determine that the dramatic effect of the annealing treatment on the photocurrent density had its origin on a poor charge transfer at the titania/electrolyte interface. X-ray photoelectron spectroscopy and thermogravimetry measurements have been used to prove the relevance of the presence of chlorine coming from the synthesis process of TiO₂ nanorods.     

Photoelectrochemical performance of graphene-modified TiO2 photoanodes in the presence of glycerol as a hole scavenger

Graphene-modified TiO₂ (G-TiO₂) photoanode films were successfully prepared by a simple, versatile, and low-cost spray pyrolysis deposition method. The effects of graphene incorporation on the relevant properties of TiO₂ films were investigated by means of XRD, SEM, UV–vis absorbance spectroscopy, and photoelectrochemistry-related measurements. Bias-dependant efficiency calculated from linear-sweep voltammograms shows that the presence of graphene within the film networks, despite its low content, could promote a substantial improvement in maximum photoconversion efficiency from 0.39% (at −0.27 V vs HgO|Hg) to 0.65% (at −0.35 V vs HgO|Hg). This improvement is attributable to the enhancement of the electron-transferring ability upon the insertion of graphene, as confirmed by transient photocurrent analysis and Electrochemical Impedance Spectroscopy (EIS). The effectiveness of the photoelectrochemical cell employing G-TiO₂ as an excellent photoanode was further examined by running it in the presence of glycerol as a hole scavenger. Glycerol plays an important role as an effective sink for the photogenerated holes so that the surface charge recombination can be significantly suppressed and, subsequently, the photocurrent is enhanced. The additional photocurrent due to glycerol introduction into the cell depends upon the initial concentration of glycerol according to a model resembling a Langmuir–Hinshelwood isotherm. Based upon the results of the present study, further improvements in terms of graphene content, surface morphology modification or the use of other organic wastes as hole scavengers may be important for future investigation.     

Enhanced electrochemical hydrogen storage capacity of multi-walled carbon nanotubes by TiO2 decoration

Electrochemical hydrogen storage of multi-walled carbon nanotubes (MWCNTs) decorated by TiO₂ nanoparticles (NPs) has been studied by the galvanostatic charge and discharge method. The TiO₂ NPs are deposited on the surface of MWCNTs by sol-gel method. Structural and morphological characterizations have been carried out using XRD, SEM and TEM, respectively. TiO₂ NPs can significantly enhance the discharge capacity of MWCNTs. The cyclic voltammograms analysis indicates that the electrical double layer contributes little to the discharge capacity of TiO₂-decorated MWCNTs. The MWCNTs modified with a certain amount of TiO₂ NPs have a discharge capacity of 540 mAh/g, corresponding to an electrochemical hydrogen storage capacity of about 2.02 wt%, which is quite interesting for the battery applications. The enhancement effect of TiO₂ NPs on the discharge capacity of MWCNTs could be related to the increased effective area for the adsorption of hydrogen atoms in the presence of TiO₂ NPs on MWCNTs and the preferable redox ability of TiO₂ NPs.     

TiO2 nanotubes incorporated with CdS for photocatalytic hydrogen production from splitting water under visible light irradiation

The CdS/TiO₂ composites were synthesized using titanate nanotubes (TiO₂NTs) with different pore diameters as the precursor by simple ion change and followed by sulfurization process at a moderate temperature. Some of results obtained from XRD, TEM, BET, UV–vis and PL analysis confirmed that cadmium sulfide nanoparticles (CdSNPs) incorporated into the titanium dioxide nanotubes. The photocatalytic production of H₂ was remarkably enhanced when CdS nanoparticles was incorporated into TiO₂NTs. The apparent quantum yield for hydrogen production reached about 43.4% under visible light around λ = 420 nm. The high activity might be attributed to the following reasons: (1) the quantum size effect and homogeneous distribution of CdSNPs; (2) the synergetic effects between CdS particles and TiO₂NTs, viz., the potential gradient at the interface between CdSNPs and TiO₂NTs.