共查询到20条相似文献,搜索用时 93 毫秒
1.
2.
3.
近十余年来,我国新建和大修改造的几十座大高炉(以下简称新建大高炉),都采用了当今世界一流的先进技术,装备水平都很高,可见他们是想创世界一流的。但是由于原料、燃料质量和管理等原因,这些高炉的技术经济指标并未达到或尚未达到世界一流水平。可见光是“硬件”(技术装备)达到了世界一流水平,而“软件”(主要是管理)达不到一流水平,还是创造不出世界一流的生产成绩的。 相似文献
4.
根据君津3号高炉的主要经验和宝钢1号高炉投产一年来的成绩与差距,提出了宝钢1号高炉创世界第一流水平的努力方向。 相似文献
5.
6.
2000年以来,宝钢高炉炼铁生产继续稳定顺行,技术经济指标大幅度提高。吨铁喷煤比已连续2年稳定在200kg以上,其中1号高炉连续18个月在230kg以上,吨铁焦比达265kg。2000年上半年,3座高炉平均送风温度达1250℃,进入世界先进行列,铁水硅、硫含量达到0.30%及0.02%的世界先进水平。3座高炉吨铁燃料消耗连续6个月降至500kg以下,吨铁入炉焦比下降到280kg,单座高炉月利用系数最高达2.386t/m3·d,从而使宝钢高炉炼铁综合指标继续保持世界领先水平。宝钢高炉炼铁技术经济指标继续保持世界领先水平@郁池… 相似文献
7.
8.
9.
自从改革开放以来,我国炼铁技术取得了巨大进步,不仅表现在技术经济指标上显著提高,而且还表现在炼铁领域内多项技术、设备有了飞跃发展,其中有些已进入国际先进行列,有的已是国际领先水平。现在分述如下:1.高炉主要技术经济指标一大批炼铁企业的主要技术经济指标已进入国际先进行列(见下表),标志着我国高炉的总体水平和操作管理能力已立于世界先进之林。其中宝钢最具代表性,宝钢已连续4年平均高炉利用系数达2.252—2.258t/m3·d、焦比294—283kg/t、煤比203—207kg/t的水平,当之无愧的位居国际先进行列。其中煤比连续4年保持在200kg/t以上,… 相似文献
10.
宝钢炼铁系统技术进步 总被引:1,自引:0,他引:1
1998年,宝钢炼铁系统依靠科技进步,原料准备实现了混匀矿智能化堆积,烧结实现了低SiO2烧结矿生产,炼焦做到了焦炉作业率生产,炼铁实现了高炉生产稳定,产量上升,煤比达到200kg/t的目标,宝钢炼铁系统的生产技术总结了水平达到了世界先进水平。 相似文献
11.
本文概述了“江铜股份公司与国际一流铜矿业公司主要技术经济指标比较研究”课题所得出的主要结论 ,在此奉献给广大读者 ,以求能为江铜创建国际一流铜矿业公司起到一点促进与参考作用。 相似文献
12.
油画课程是高等师范院校美术教育课程中的重要组成部分,油画教学第二课堂是第一课堂的有效补充,构建油画教学第二课堂为实现高师油画教学目标提供了平台阵地和现实途径。 相似文献
13.
14.
A. A. Shibkov M. A. Zheltov A. E. Zolotov A. A. Denisov E. V. Vyzhanov 《Russian Metallurgy (Metally)》2012,2012(4):350-356
The dynamics of the first deformation bands in an aluminum-magnesium A5456 alloy deformed at a constant rate of increase of stresses $\left( {\dot \sigma _0 = const} \right)$ is studied by acoustic emission and simultaneous high-speed video filming. A linear relation is found between an acoustic signal and the area of the first band during the first 20 ms of its development. Acoustic precursors are shown to be used to trigger devices with a positive or negative feedback to amplify or suppress deformation jumps, respectively. 相似文献
15.
核一级部件的断裂韧度要求反映在ASME和RCC-M规范中,即KIR-(T-RTNDT)基准曲线。KIP包括KIa,KId和KIc^J。KIc^J的测试国内外已有标准方法,而KIa的测试只有美国公布了正工标准,KId的测试国内外没有标准方法可循。因此,为研究核电材料断裂韧度,首先建立了相应的测试方法,在此基础上试验了国产核一级容器钢508-3的动、静态断裂韧度KIa,KId,KIc,获得了不同温度下的数据,并与ASME和RCC-M规范中的基准曲线作了比较。结果表明,国产508-3钢的动、静态断裂韧度能满足核一级部件的要求。 相似文献
16.
17.
18.
19.
CM Schmidt RG Ehlenfeldt MC Athanasiou LA Duvick H Heinrichs CS David HT Orr 《Canadian Metallurgical Quarterly》1993,151(5):2633-2645
Trophoblast, the only fetal tissue in direct contact with maternal cells, fails to express the polymorphic HLA class I molecules HLA-A and -B, but does express the nonpolymorphic class I molecule HLA-G. It is thought that HLA-G may provide some of the functions of a class I molecule without stimulating maternal immune rejection of the fetal semiallograft. As a first step in identifying the cis-acting DNA regulatory elements involved in the control of class I expression by extraembryonic tissue, several types of transgenic mice were produced. Two HLA-G genomic fragments were used, 5.7 and 6.0 kb in length. These included the entire HLA-G coding region, 1 kb of 3' flanking sequence, and 1.2 or 1.4 kb of 5' flanking sequence, respectively. A hybrid transgene, HLA-A2/G, was produced by replacing the 5' flanking sequence, first exon, and early first intron of HLA-G with the corresponding elements of HLA-A. Comparison of transgene mRNA expression patterns seen in HLA-A2/G and HLA-G transgenic mice suggests that 5' flanking sequences are largely responsible for the differing patterns of expression typical of the classical class I and HLA-G genes. Studies comparing the extraembryonic HLA-G expression levels of founder embryos transgenic for either the 5.7- or 6.0-kb HLA-G transgene showed that the 6.0-kb transgene directed HLA-G expression far more efficiently than did the 5.7-kb HLA-G transgene, producing extraembryonic HLA-G mRNA levels similar to those seen in human extraembryonic tissues. The results of these studies suggest that the 250-bp fragment present at the extreme 5' end of the 6.0-kb HLA-G transgene and absent from the 5.7-kb HLA-G transgene contains an important positive regulatory element. This 250-bp fragment lies further upstream than any of the previously documented class I regulatory regions and may function as a locus control region. 相似文献
20.
贫磁铁矿阶段磨选流程中一段磁选作业工序关系着磁选指标的好坏。韩旺铁矿研制的“一段磨机产量、分级溢流浓度与一段磁选机补加水量关系诺模图”能够有效地控制分选浓度,精度误差不大于1%,满足了生产要求。 相似文献