Development of a cooked rice model for bibimbap and resulting physico-digestive properties

A cooked rice model for bibimbap was developed using response surface methodology (RSM). The ratio of brown rice (X ₁), high amylose rice (X ₂) based on a white rice ratio of 1.0, and the ratio of water to total rice weight (X ₃), were independent variables. Stickiness (Y ₁), elasticity (Y ₂), and overall acceptability by sensory testing (Y ₃) of cooked rice were dependent variables. Optimal RSM conditions were white rice:brown rice:high amylose rice=1:1.07:0.56, and the ratio of water to total rice weight was 1.6. Coefficient of determination (R ²) values of response surface equations were 0.909, 0.930, and 0.956 for Y ₁, Y ₂, and Y ₃, respectively (p<0.05). Experimental values measured under optimal conditions coincided with predicted values. Rapidly digestive starch (RDS) and expected glycemic index (eGI) values determined using the optimized rice model were much lower than for control white rice only.     

Effect of Dipping Pre-treatment with Unripe Grape Juice on Dried “Golden Delicious” Apple Slices

The consumption of apple chips is increasing in the last decades because of the consumer’s preferences towards healthy snacks. However, the enzymatic browning, which is attributed mainly to polyphenol oxidase (PPO, EC 1.10.3.1) activity, negatively affects the sensory, nutritional, and antioxidant properties of dried apples as a consequence of the oxidation of phenolic substrates during post-harvest stages. The antibrowning and antioxidant effects of dipping pre-treatments with unripe grape juice as well as reference formulations including a mixture of 1% w/v ascorbic acid and 1% w/v citric acid, 6% w/v NatureSeal®, and 0.1% w/v sodium metabisulfite were evaluated by spectrophotometric and colorimetric assays on dried “Golden Delicious” apple slices. Based on HPLC analysis, the treated apple slices were enriched with bioactive compounds which effectively improved antioxidant capacity and limited enzymatic browning by increasing lightness, reducing color change, and inhibiting PPO activity. Hence, the juice of unripe grapes recovered as agricultural wastes during bunch thinning of vineyards could be proposed as a safe, inexpensive, and eco-friendly alternative to conventional antibrowning treatments in apple processing.     

Antioxidant Activity and Determination of Phenolic Compounds from <Emphasis Type="Italic">Eugenia involucrata</Emphasis> DC. Fruits by UHPLC-MS/MS

Fruits have been the focus of several studies aimed at finding new antioxidant sources for protection against the damage caused by reactive species. In this study, the antioxidant activity and the presence of phenolic compounds in all parts (peel, pulp, and seeds) of Eugenia involucrata DC. fruits were evaluated. DPPH^·, ABTS^·+, and ORAC methods were used to determine the antioxidant activity, and an UHPLC-MS/MS method was developed for determining the phenolic compounds (gallic, chlorogenic, ferulic, p-coumaric and ellagic acids, quercetin, and myricetin). In the determination of both antioxidant activity and phenolic composition, the efficiency of solvents with different polarities—methanol/H₂O (80:20, v/v), ethanol/H₂O (80:20, v/v), methanol/acidified water with phosphoric acid pH 3.00 (80:20, v/v), and ethyl acetate—for the extraction of the phenolic compounds, was also evaluated. All parts of E. involucrata fruits showed antioxidant activity, in the range of 36.68 ± 1.44 to 873.87 ± 18.24 μmol TE g^?1, being the highest values found in the seeds and peel when more polar extraction solvents were used. Six, five, and three phenolic compounds were identified and quantified in the pulp, peel, and seeds, respectively, with the highest abundance as p-coumaric acid (14 ± 2 mg kg^?1) in the pulp, quercetin (47 ± 5 mg kg^?1) in the peel, and gallic acid (74 ± 4 mg kg^?1) in the seeds, also when more polar solvents were used. Although antioxidant activity methods suggested that the peel and seeds have more antioxidant potential, a wider variety of compounds were determined in the pulp.     

Chlorophyll Fluorescence Imaging for Monitoring the Effects of Minimal Processing and Warm Water Treatments on Physiological Properties and Quality Attributes of Fresh-Cut Salads

In this study, chlorophyll fluorescence imaging (CFI) was used to monitor plant stress induced by cutting of mini romaine lettuce (Lactuca sativa L. var. longifolia) and by cutting and washing of endive (Cichorium endivia L.) during storage. Regarding the more detailed study of endive fresh-cut salads, we additionally monitored respiratory activity, phenylalanine ammonia lyase (PAL) activity, contents of plant pigments, and cut edge browning. Determination of maximum quantum efficiency F _v/F _m was feasible through sealed consumer-sized film bags, thus, enabling the non-invasive monitoring of both fresh-cut salad types in the corresponding modified atmosphere during storage. Cutting of romaine lettuce provoked a partially reversible drop of F _v/F _m during the first 24 h. Subsequently, F _v/F _m of cut romaine strongly decreased with elapsing shelf life, whereas intact leaves exhibited only a slight decline. Regarding minimally processed endive, warm water washing progressively reduced F _v/F _m with increasing heat exposure, while respiratory activities and the content of accessory pigments remained unaffected. The heat-dependent decrease of F _v/F _m was correlated to the inhibition of the PAL activity. Mildly warm washing (40 °C, 120 s; 45 °C, 60 s) reduced PAL activities, while F_v/F_m remained widely unaffected and visual quality was only partially improved. However, warm water washing at elevated temperatures (45 °C, 120 s; 50 °C, 30–60 s) enabled maximum visual quality retention, accompanied by a significant decrease of F _v/F _m. CFI may represent a useful tool to monitor the stress conditions due to cutting and warm water treatments, hence, allowing the systematic improvement of fresh-cut produce.     

Non-destructive Assessment of Guava (<Emphasis Type="Italic">Psidium guajava</Emphasis> L.) Maturity and Firmness Based on Mechanical Vibration Response

Storage potential and eating quality of guava (Psidium guajava L.) fruit depend on its maturity. Segregation of guava according to maturity and firmness measured using non-destructive technologies would help the industry to designate ripe fruit to immediate market and less ripe fruit for distant market (e.g., exportation). This research was conducted to evaluate the potential of experimental resonant frequency (f _e) and elasticity index (EI) to estimate fruit firmness, which has been reported to be inversely correlated to its maturity. A maturity index (I _m) was calculated as the ratio of total soluble solids/titratable acidity (TSS/TA). It was proved that TSS, TA, and I _m were significantly correlated (P?<?0.05) to skin firmness (F _s), flesh firmness (F _f), stiffness (S), and analytical resonant frequency (ω _n ), being S the attribute best fitted to I _m (R ²?=?0.77). Since it was observed that f _e and EI were sensitive to changes in fruit firmness, both of them were explored as alternatives to predict F _s, F _f, S, and ω _n of guava fruit. In some cases, EI improved the models to predict guava firmness traits (e.g., F _s vs f _e had a coefficient of determination of R ²?=?0.58, whereas for F _s vs EI, it was R ²?=?0.62). The best model occurred when plotting ω _n vs f _e (R ²?=?0.86), followed by S vs EI (R ²?=?0.84), making these promising features for the development of a new practical application using frequency response measurement as a non-destructive method to assess guava maturity.     

Effect of Thermosonic Pretreatment and Microwave Vacuum Drying on the Water State and Glass Transition Temperature in <Emphasis Type="Italic">Agaricus bisporus</Emphasis> Slices

This study aimed to understand the micromechanism of thermosonic pretreatment and microwave vacuum drying on Agaricus bisporus. The water state and glass transition temperature (T _g ) of fresh and thermosonically treated Agaricus bisporus slices during microwave vacuum drying were studied using differential scanning calorimetry (DSC), low-field nuclear magnetic resonance (LF-NMR), and magnetic resonance imaging (MRI). Results showed that four population groups were contained in the initial distribution of transverse relaxation time (T ₂) data of fresh A. bisporus slices: T ₂₁ (0.38–7.05 ms), T ₂₂ (9.33–32.75 ms), T ₂₃₁ (37.65–265.61 ms), and T ₂₃₂ (305.39–811.13 ms). Thermosonic pretreatment significantly decreased the initial free water content of A. bisporus sample but was accompanied by a sharp increase in its immobilized water. “Semi-bound water transfer” appeared during microwave vacuum drying (MVD) at moisture contents (X _w ) of 0.70 and 0.60 g/g (wet basis (w.b.)) for untreated and thermosonically treated samples, respectively. MVD caused dramatic changes in the water state and enhanced the T _g by decreasing the content and mobility of immobilized water in A. bisporus tissues. The mobility of semi-bound water for thermosonically and MVD-treated samples was higher than for MVD-untreated samples, resulting in T _g values decreasing by approximately 2–11.5 °C, but the uniformity of water distribution in thermosonic-treated and MVD-treated samples was better at X _w  ≤ 0.52 g/g (w.b.).     

A mathematical model for moisture movement during continous and intermittent drying of <Emphasis Type="Italic">Eucalyptus saligna</Emphasis>

A modified diffusion-based mathematical model is proposed to describe the moisture movement during continuous and intermittent drying of Eucalyptus saligna. This model includes the temperature change, the surface drying coefficient (β _n ) and 2 diffusion coefficients [from green to FSP (D _f ) and from FSP to dry condition (D _o )] as important parameters. The final model expression obtained was M?=?exp (??25 β _n ² D _t /l²) with the β _n used was 1.5807 kg m^?2 s^?1, the D _f was 2.26?×?10^?11 m² s^?1, and the D _o was 5.85?×?10^?12 m² s^?1. The range of temperature change between heating and non-heating phases in the intermittent drying regimes was from 24.9 to 31.8 °C. The R² values obtained when the model was fitted into the drying data of different intermittent regimes ranged from 71.5 to 85.9%. The R² value was 87.4% when the model was fitted into continuous trial data. The high values of R² indicate that the model can be used to understand the moisture reduction both in intermittent and continuous regimes.     

Establishment and Application of Infant Formula Fingerprints by RP-HPLC

An efficient method for rapid and simple identification of infant formula quality was investigated so as to prevent brand counterfeit of infant formulas. Reversed-phase, high-performance liquid chromatography (RP-HPLC) method combined with chemometric method was developed for fingerprints analysis. To optimize the RP-HPLC conditions, the RP-HPLC analysis was performed on a C₈ column by using gradient elution with 0.1% (v/v) aqueous trifluoroacetic acid (TFA) in water as mobile phase A and 0.1% (v/v) TFA in acetonitrile as mobile phase B, the flow rate was 0.5 mL min^?1, and the detection wavelength was set at 214 nm. Three different stages of infant formulas of two series (R₁ and R₂) of R brand were analyzed to establish infant formula fingerprints of each series at different stages under optimal conditions. Five major common peaks in each chromatogram of the infant formulas were used in fingerprint analysis. The results showed that the RP-HPLC fingerprints and principal component analysis (PCA) method can effectively differentiate the infant formula of different brands, as well as the different series of infant formulas of the same brand, which provide an effective testing method for authenticity identification and brand protection in infant formulas.     

Effect of Tannin Extracts on Biofilms and Attachment of <Emphasis Type="Italic">Escherichia coli</Emphasis> on Lettuce Leaves

Lettuce is often involved in foodborne outbreaks caused by pathogenic Escherichia coli. Current control strategies have often proved ineffective to ensure safe food production. For that reason, the present study compared the efficacy of tannin extracts and chlorine treatments on the reduction of E. coli ATCC 25922 adhered to lettuce leaves. E. coli was inoculated artificially on leaf surfaces of fresh crisp lettuce. Effectiveness of water, chlorine (200 mg/L), and three commercial available tannin extracts from Acacia mearnsii De Wild. (tannin AQ (2 %, w/v), tannin SG (1 %, v/v) and tannin SM (1 %, v/v)) treatments was evaluated using the viable plate count method and scanning electron microscopy (SEM). SEM results revealed that bacterial cells are attached as individual cells and in clusters to the leaf surface after 2 h of incubation. Biofilm formation was observed after 24 h of incubation. The tannin SM treatment was able to reduce counts in approximately 2 log CFU/cm² on leaf segments. However, treatment was less effective in the reduction of E. coli counts after 24 h of incubation when compared to 2 h incubation of the same extract. The results suggest that the tannin SM extract diminishes E. coli counts adhered to and under biofilm formation on lettuce leaves and its effect is similar to the use of chlorine solutions.     

Influence of Technological Processes on Biologically Active Compounds of Produced Grapes Juices

Grape juice quality can be substantially influenced by different processing methods and their parameters. This study deals with the influence of thermomaceration temperature and its holding time on important juice quality parameters such as the content of trans-resveratrol, trans-piceid, trans-ε-viniferin, and 2,4,6-trihydroxyphenantrene-2-O-glucoside. All the aforementioned compounds together with antioxidative capacity, total polyphenols, and antimutagenic activity were measured. This study used the following grapes: Blaufränkisch, Blaufränkisch bio, Saint Laurent, Grüner Veltliner, Grüner Veltliner bio, and Müller-Thurgau. For all tested grape varieties, the most important processing parameters were temperature and thermomaceration holding time. There were no significant differences in the content of the studied compounds. Three preservation technologies, freezing, bottle pasteurization, and high-pressure treatment, were also studied regarding the content of abovementioned biologically active compounds. Results of this study can be immediately applied to grape juice production.     

Dispersive Liquid–Liquid Microextraction Combined With Micellar Electrokinetic Chromatography for the Determination of Some Photoinitiators in Fruit Juice

A fast and simple technique composed of dispersive liquid–liquid microextraction (DLLME) and micellar electrokinetic chromatography (MEKC) with diode array detector (DAD) was developed for the determination of multi-photoinitiators in fruit juice. Seven photoinitiators were separated in MEKC using a 25 mM borate buffer of pH 8.0, containing 24 mM sodium dodecyl sulfate (SDS), 10 mM β-cyclodextrin (β-CD), and 12.5 % acetonitrile (v/v). A CD-modified MEKC made this method more suitable for the determination of isopropylthioxanthone (ITX) isomers including 2-IXT and 4-ITX than the recently prescribed methods. A DLLME procedure was used as an offline preconcentration strategy. The satisfactory recoveries obtained by DLLME spiked at two spiked levels ranged from 85.6 to 124.7 % with relative standard deviations (RSDs) below 14 %. The limits of quantification (LOQs) ranged from 2.1 to 6.0 μg kg^?1.     

Optimization of Extraction Parameters of Total Phenolics from <Emphasis Type="Italic">Annona crassiflora</Emphasis> Mart. (Araticum) Fruits Using Response Surface Methodology

In this study, response surface methodology was used to optimize the extraction temperature (25–75 °C) and ethanol concentration (0–70 %, ethanol/water, v/v) to maximize the extraction of total phenolic compounds (TPC) from araticum pulp. The efficiency of the extraction process was monitored over time, and equilibrium conditions were reached between 60–90 min. A second-order polynomial model was adequately fit to the experimental data with an adjusted R ² of 0.9793 (p < 0.0001) showing that the model could efficiently predict the TPC content. Optimum extraction conditions were ethanol concentration of 46 % (v/v), extraction temperature of 75 °C and extraction time of 90 min. Under the optimum conditions, the araticum pulp showed high TPC content (4.67 g GAE/100 g dw) and also high antioxidant activity in the different assays used (46.56 μg/mL, 683.65 μmol TE/g and 1593.72 μmol TE/g for DPPH IC₅₀, TEAC and T-ORAC_FL, respectively). From our extraction procedure, we successfully recovered a significantly higher amount of TPC compared to other studies in the literature to date (1.5–22-fold higher). Furthermore, TPC and antioxidant activity were present in the fruit in levels that are difficult to find in other common fruits. These results expose a potential approach for improving human health through consumption of araticum fruit.     

Effect of isomaltulose used for osmotic extraction of <Emphasis Type="Italic">Prunus mume</Emphasis> fruit juice substituting sucrose

This study evaluated the applicability of isomaltulose as a sucrose substitute in the osmotic extraction of Prunus mume fruit juice. Isomaltulose (20 mM) significantly reduced the uptake of a fluorescent tracer—2-[N-(7-nitrobenz-2-oxa-1,3-diaxol-4-yl) amino]-2-deoxyglucose. Juice extracted by isomaltulose had similar pH and titratable acidity values to those of the other sugars. Citric and malic acids were the main organic acids in the extracted juices. The radical-scavenging ability of the plum juice extracted by isomaltulose was significantly higher than in juices extracted by other sugars (p?<?0.05) and polyphenols content of the juice was also significantly higher than those of other sugars. The blood glucose level of P. mume juice extracted by fructose or isomaltulose was increased slowly compared to the juice extracted by sucrose. Therefore, the use of isomaltulose or an isomaltulose mixture in the manufacture of P. mume juice will help maintain health by reducing sugar intake.     

Characterization of Biodegradable Films Based on <Emphasis Type="Italic">Salvia hispanica</Emphasis> L. Protein and Mucilage

Biodegradable films of chia by-products (mucilage and protein-rich fraction (PF)) incorporated with clove essential oil (CEO) were obtained and characterized. The effects of polymer concentration (PC; 1.0–3.0 %, w/v) and CEO concentration (0.1–1.0 %, v/v) were evaluated as well as the pH (7–10), using a 2³ factorial design with four central points. The films exhibited moisture values between 11.6 and 52.1 % (d.b.), which decreased (p?<?0.05) with increasing PC and CEO. The thickness of the films increased (p?<?0.05) with increasing PC. PC and pH influenced (p?<?0.05) the lightness (L) and variation in color between red and green (a). The orientation of the color to yellow-blue hues (b) decreased significantly (p?<?0.05) with increasing PC. Transparency was significantly lower and higher (p?<?0.05) than PC and CEO, respectively. The film surface morphology was evaluated using atomic force miscrocope images, and thermogravimetric analysis (TGA) was performed to study the thermal stability of the films. The displacement and tensile strength were significantly lower (p?<?0.05) at higher concentrations of CEO, this variable being the only one with a significant effect. The chemical composition of the films was confirmed utilizing Fourier transform infrared (FTIR) spectroscopy. The proportion of CEO added to the films had a significant influence on antimicrobial activity, inhibiting the growth of both Escherichia coli and Staphylococcus aureus.     

Pressure-Thermal Kinetics of Furan Formation in Selected Fruit and Vegetable Juices

Furan, a potential carcinogenic compound, can be formed in array of processed foods. The objective of this study was to conduct kinetic studies in pineapple juice and assess the interactive effects of pressure (0.1 to 600 MPa) and temperature (30 to 120 °C) on furan formation. Additional experiments were carried out in tomato, watermelon, cantaloupe, kale, and carrot juice to understand the influence of matrix and juice pH. Furan was monitored in raw (control) and processed samples by automated headspace gas chromatography mass spectrometry, and quantified by calibration curve method with d₄-furan as internal standard. The data were modeled using zero-, first-, and second-order equations. The zero-order rate constants (k _T,P ), activation energy (E _a ), and Gibbs free energy of activation (ΔG ^?) of furan formation in thermally processed (TP; 90–120 °C) pineapple juice were found to be 0.036–0.55 μg/kg/min, 98–114 kJ/mol, and 173.9–180.5 kJ/mol, respectively. Furan concentration was negligible and close to the detection limit (0.37 μg/kg) after pressure treatment (600 MPa at 30 °C) of juice samples. For similar process temperatures, the rate constants of pressure-assisted thermally processed (PATP; 600 MPa at 105 °C) pineapple juice were lower than that of TP samples. Furan formation was influenced by juice matrix and pH. On the other hand, PATP markedly suppressed furan (0.7 to 1.6 μg/kg) in these selected juices. In conclusion, furan formation increased with process temperature and treatment time, while pressure treatment at ambient temperature did not promote its production. Furan formation in TP fruit juices was also influenced by juice matrix and pH, but these were not the significant factors for PATP-treated juices.     

Smart NMR Method of Measurement of Moisture Content of Vegetables During Microwave Vacuum Drying

Microwave drying is usually combined with vacuum environment in conjunction with hot air flow to draw the moisture rapidly. The moisture content of the vegetables undergoing drying is hard to measure online. This research designed a microwave vacuum drying (MVD)-low-field nuclear magnetic resonance (NMR) smart device and investigated the feasibility of NMR method for online measurement of state of moisture during MVD. The relation between the signal amplitude (A ₂) and the true moisture content (M ₁) of six kinds of vegetables (mushroom, carrot, potato, lotus, edamame, vegetable corn) was fitted to estimate if NMR can measure the M ₁ of vegetables directly. Results showed that A ₂ and M ₁ of different fresh vegetables had no single empirical mathematical model to fit. However, for each kind of these vegetables, the A ₂ and corresponding M ₁ in different MVD stages showed a significant linear relationship. The predicted moisture content (M ₂) of mushroom: M ₂ = 5.25351 × 10^?4 A ₂ ? 0.34042, R = 0.996; carrot: M ₂ = 5.78756 × 10^?4 A ₂ ? 0.14108, R = 0.998; potato: M ₂ = 3.10019 × 10^?4 A ₂ ? 0.10612, R = 0.991; lotus: M ₂ = 2.32415 × 10^?4 A ₂ ? 0.01573, R = 0.998; edamame: M ₂ = 3.13310 × 10^?4 A ₂ ? 0.4198, R = 0.996; vegetable corn: M ₂ = 1.69461 × 10^?4 A ₂ ? 0.09063, R = 0.995. The linear models between M ₂ and A ₂ were able to estimate the end point (M ₁ < 8%) of MVD with a high accuracy (P > 0.950).     

A Case Study on Optimization of Biomass Flow During Single-Screw Extrusion Cooking Using Genetic Algorithm (GA) and Response Surface Method (RSM)

In the present study, response surface method (RSM) and genetic algorithm (GA) were used to study the effects of process variables like screw speed, rpm (x ₁), L/D ratio (x ₂), barrel temperature (°C; x ₃), and feed mix moisture content (%; x ₄), on flow rate of biomass during single-screw extrusion cooking. A second-order regression equation was developed for flow rate in terms of the process variables. The significance of the process variables based on Pareto chart indicated that screw speed and feed mix moisture content had the most influence followed by L/D ratio and barrel temperature on the flow rate. RSM analysis indicated that a screw speed?>?80 rpm, L/D ratio?>?12, barrel temperature?>?80 °C, and feed mix moisture content?>?20% resulted in maximum flow rate. Increase in screw speed and L/D ratio increased the drag flow and also the path of traverse of the feed mix inside the extruder resulting in more shear. The presence of lipids of about 35% in the biomass feed mix might have induced a lubrication effect and has significantly influenced the flow rate. The second-order regression equations were further used as the objective function for optimization using genetic algorithm. A population of 100 and iterations of 100 have successfully led to convergence the optimum. The maximum and minimum flow rates obtained using GA were 13.19?×?10^?7 m³/s (x ₁?=?139.08 rpm, x ₂?=?15.90, x ₃?=?99.56 °C, and x ₄?=?59.72%) and 0.53?×?10^?7 m³/s (x ₁?=?59.65 rpm, x ₂?=?11.93, x ₃?=?68.98 °C, and x ₄?=?20.04%).     

Non-Thermal Pasteurization of Orange (<Emphasis Type="Italic">Citrus sinensis</Emphasis> (L.) Osbeck) Juices Using Continuous Pressure Change Technology (PCT): a Proof-of-Concept

Non-thermal pasteurization of orange juices using a continuous pressure change technology (PCT) device was investigated on pilot plant scale for the first time. PCT treatment was conducted by pressurizing orange juice and nitrogen at moderately high pressures (P?=?25 or 50 MPa) in a tubular continuous reactor. Abrupt decompression was achieved by a relief valve at the end of the tubular system. As compared to freshly squeezed juice, PCT treatment slightly reduced levels of carotenoids, vitamin C and hesperidin by 19, 5, and 14 %, respectively. Peroxidase was completely inactivated, whereas residual pectin methylesterase activities amounted to 26–27 %. Simultaneously, total aerobic plate counts were substantially reduced by at least 3.4 log₁₀ cfu/mL. The mean volume-weighed particle diameter d ₄₃ was drastically reduced from 652 μm in freshly squeezed juice to 6 and 31 μm at 25 and 50 MPa, respectively. Concomitantly, CIE-L*a*b* color values indicated a brighter and more intense yellow color of PCT-treated juices. While cloud separation in freshly squeezed juice was completed within 3 days, cloud stability in PCT-treated juices was retained for 5 days.     

Purification and characterization of <Emphasis Type="Italic">β</Emphasis>-glucosidase from <Emphasis Type="Italic">Oenococcus oeni</Emphasis> 31MBR

This study was designed to characterize a β-glucosidase from Oenococcus oeni 31MBR, a strain widely used in Chinese winemaking. An intracellular β-glucosidase (EC 3.2.1.21) was partially purified using a combination of ammonium sulfate precipitation and chromatographic methods. A single band was obtained in SDS-PAGE electrophoresis, indicating that the enzyme was highly purified and had an estimated molecular mass of 38.9 kDa. The enzyme exhibited highest activity at pH 4.5–5.0. The optimum temperature was 45 °C. Ethanol promoted the activity of this enzyme up to three times. Among the several metal ions assayed, only Mn²⁺ exhibited a partial promotion effect. The K _m and V _max values for p-nitrophenyl-β-d-glucopyranoside were 1.05 mmol/L and 0.957 nmol/min, respectively. Up to now, this study contains the first characterization of a native β-glucosidase purified from crude extracts of O. oeni 31MBR.     

Thermal transition and thermo-physical properties of potato (<Emphasis Type="Italic">Solanum tuberosum L</Emphasis>.) var. Russet brown

Potatoes are an important food in many regions of the world and are commonly used in a variety of food products. Thermal transition and thermo-physical properties of potatoes are important in order to design efficient food processes and select appropriate storage conditions. In this study, we determined the thermal transitions and thermophysical properties of raw and blanched/par-fried potato for a temperature range of ??32 to 21.1 °C. Using differential scanning calorimetry, we found an initial freezing point (T_f) at ??1.8?±?0.1 °C, an onset of melting (T_m^′) at ??9.9?±?0.2 °C and an unfreezable water content (X^′_w) for maximally freeze-concentrated raw potato at 0.21 kg water/kg potato. Corresponding values for blanched/par-fried potatoes were ??0.9?±?0.1 °C, ??11.0?±?0.2 °C and 0.18 kg water/kg potato. Results show that an increase in solids content decreased T_f of both raw and blanched potatoes. We modelled the relationship between them using the Chen model. The apparent specific heat (C_app) increased around T_f to 31.7?±?1.13 kJ/kg K for raw potato and 26.7?±?0.62 kJ/kg K for blanched/par-fried potato. For frozen raw potato at ??32 °C, thermal diffusivity (α) was 0.89?±?0.01?×?10?^?6 m²/s and thermal conductivity (k), 1.82?±?0.14 W/m K, respectively. These values were higher for frozen raw potato than for the unfrozen raw potato (0.15?±?0.01?×?10?^?6 m²/s and 0.56?±?0.08 W/m K, respectively at 21.1 °C). The apparent density (ρ) of frozen raw potato (992?±?4.00 kg/m³ at ??32 °C) was less than that for unfrozen raw potato (1053?±?4.00 kg/m³ at 21.1 °C), and a similar trend was obtained for blanched/par-fried potato (993?±?2.00 kg/m³ at ??32 °C and 1188?±?7.00 kg/m³ at 21.1 °C, respectively). This study established a correlation between thermo-physical properties and temperature. Findings may be used to inform the design and optimization of freezing processes and frozen storage for potato products.