Comparison of thermomechanical properties of statistical, gradient and block copolymers of isobornyl acrylate and n-butyl acrylate with various acrylate homopolymers

Well-defined statistical, gradient and block copolymers consisting of isobornyl acrylate (IBA) and n-butyl acrylate (nBA) were synthesized via atom transfer radical polymerization (ATRP). To investigate structure-property correlation, copolymers were prepared with systematically varied molecular weights and compositions. Thermomechanical properties of synthesized materials were analyzed via differential scanning calorimetry (DSC), dynamic mechanical analyses (DMA) and small-angle X-ray scattering (SAXS). Glass transition temperature (T_g) of the resulting statistical poly(isobornyl acrylate-co-n-butyl acrylate) (P(IBA-co-nBA)) copolymers was tuned by changing the monomer feed. This way, it was possible to generate materials which can mimic thermal behavior of several homopolymers, such as poly(t-butyl acrylate) (PtBA), poly(methyl acrylate) (PMA), poly(ethyl acrylate) (PEA) and poly(n-propyl acrylate) (PPA). Although statistical copolymers had the same thermal properties as their homopolymer equivalents, DMA measurements revealed that they are much softer materials. While statistical copolymers showed a single T_g, block copolymers showed two T_gs and DSC thermogram for the gradient copolymer indicated a single, but very broad, glass transition. The mechanical properties of block and gradient copolymers were compared to the statistical copolymers with the same IBA/nBA composition.     

Synthesis and characterization of side-chain liquid-crystalline block-copolymers containing laterally attached photoluminescent quinquephenyl units via ATRP

A series of novel side-chain liquid-crystalline polymers (SCLCPs) consisting of laterally attached photoluminescent p-quinquephenyl (QQP) pendants with different flexible terminal- and/or side-alkoxy chains were synthesized via atom transfer radical polymerization (ATRP). Homopolymers (HP1-HP3) and block-copolymers (PSP1-PSP3 and PEOP1-PEOP3), where QQP units were copolymerized with styrene or ethylene oxide monomers, possessed the number average molecular weights (M_n) of 8.7-26.0 × 10³ with narrow PDI values of 1.08-1.26. Various characterization techniques of polarized optical microscopy (POM), differential scanning calorimetry (DSC), and X-ray diffraction (XRD) were used to investigate their mesomorphic properties, and all homopolymers and block-copolymers exhibited the nematic phase affected by the flexible terminal- and/or side-alkoxy chains of the conjugated rod-like pendants. In addition, the photophysical properties of these polymers were measured by UV-vis and photoluminescence (PL) spectroscopies, which showed blue PL emissions with rather high fluorescence quantum yields in solutions.     

Synthesis of block copolymers for surface functionalization with stimuli-responsive macromolecules

Using block copolymers with poly(n-butyl acrylate) (PBA) as anchor block being capable to tether the temperature-responsive block poly(N-isopropylacrylamide) (PNIPAAm) to the surface, polysulfone (PSf) films were functionalized applying an adsorption/surface entrapment process. Homo and block copolymer synthesis was investigated applying atom transfer radical polymerization (ATRP) using tris(2-(dimethylamino)ethyl)amine (Me₆TREN), CuCl and N,N-dimethylformamide (DMF). On basis of the determined critical micelle concentration of the block copolymers, surface functionalization of PSf was performed from an aqueous solution containing 25 vol% dimethylacetamide. These functionalized surfaces exhibit reversible temperature dependent properties due to the lower critical solution temperature (LCST) of PNIPAAm as can be proven by contact angle measurement. Furthermore, the beneficial effect of the PBA block with adjusted molecular weight on the stability of these coatings was proven. This surface functionalization method has various potential applications and the resulting surfaces are anticipated to exhibit actively triggerable ‘chaotic’ properties as basis of an efficient anti-biofouling strategy.     

Block and star block copolymers by mechanism transformation. VIII Synthesis and characterization of triblock poly(LLA-b-St-b-MMA) by combination of ATRP and ROP

Block copolymers, poly(LLA-b-St)s and triblock copolymes, poly(LLA-b-St-b-MMA)s have been synthesized by the combination of the atom transfer radical polymerization (ATRP) with ring-opening polymerization (ROP) using bifunctional initiator β-hydroxylethyl α-bromoisobutyrate (HEBIB) without intermediate function transformation. The molecular weight (MW) and the molecular weight distribution (MWD) can be controlled. The structures of the copolymers were confirmed by ¹H NMR spectroscopy and GPC.     

The amphiphilic block copolymers of 2-(dimethylamino)ethyl methacrylate and methyl methacrylate: Synthesis by atom transfer radical polymerization and solution properties

Amphiphilic di- and tri-block copolymers of poly(methyl methacrylate) (PMMA) and poly(2-dimethylamino)ethyl methacrylate (PDMAEMA) have been synthesized by atom transfer radical polymerization (ATRP) at ambient temperature (35 °C) in the environment-friendly solvent, aqueous ethanol (water 16 vol%) using CuCl/o-phenanthroline as the catalyst. The PDMAEMA blocks are contaminated with ethyl methacrylate (EMA) residues to the extent of 1-2 mol% of DMAEMA depending on the length of the PDMAEMA block. The EMA forms through the autocatalyzed ethanolysis of the DMAEMA monomer and undergoes random copolymerization with the latter. The rate of ethanolysis is unexpectedly greater in the aqueous ethanol than in neat ethanol, which has been attributed to the higher polarity of the former than of the latter. In contrast to the ethanolysis no hydrolysis of DMAEMA in the aqueous ethanol medium could be detected for 133 h. The block copolymers form micelles in water. Their solubility and CMC in neutral water have been studied. Dynamic light scattering (DLS) studies reveal that for a fixed degree of polymerization (DP) of the PMMA block the hydrodynamic diameter of the micelles in methanolic water (water 95 vol%) increases at a faster rate with the DP of the PDMAEMA block when it is much greater than that of the PMMA block compared to when it is less than or close to that of the latter.     

A new strategy for the one-step synthesis of block copolymers through simultaneous free radical and ring opening polymerizations using a dual-functional initiator

Block copolymers are fascinating and complex materials that have been used in a range of diverse scientific and technological capacities. We demonstrate that a single one-step approach based on dual simultaneous polymerizations is a viable technique for the synthesis of a wide range of block copolymers by combining two dissimilar polymerization systems and using a dual-functional initiator. The main advantage of this methodology is that a simple, one-step, and simultaneous polymerization occurs in the bulk, which makes this process very attractive from both industrial and academic points of view. We plan to study the reaction kinetics and evaluate how well the ring opening catalyst [in this case, Sn(oct)₂] works under reverse ATRP conditions.     

羟化含氟嵌段共聚物的合成及其自组装行为研究

用α-溴代丙酸乙酯（EPN—B）／氯化亚铜（CuCl）／联二吡啶（bpy）作为催化引发体系,环己酮为溶剂,进行甲基丙烯酸2,2,2-三氟乙酯（TFEMA）的原子转移自由基聚合（ATRP）,得到单分散PTFEMA—X预聚体。并以此预聚体为大分子引发剂引发甲基丙烯酸-β-羟乙酯聚合,得到分子质量可控、分子质量分布窄的聚甲基丙烯酸2,2,2-三氟乙酯-b-聚甲基丙烯酸-β-羟乙酯嵌段共聚物,用FTIR、^1H—NMR、GPC等对产物的结构与性能进行了表征。同时利用动态激光光散射（DLS）对嵌段共聚物的自组装行为进行了研究。     

Synthesis and characterization of pH/temperature-sensitive block copolymers via atom transfer radical polymerization

In order to prepare well-defined pH-sensitive block copolymers with a narrow molecular weight distribution (MWD), we synthesized a pH-sensitive block copolymer via atom transfer radical polymerization (ATRP) of sulfamethazine methacrylate monomer (SM) and amphiphilic diblock copolymers by the ring-opening polymerization of d,l-lactide/?-caprolactone (LA/CL), and their sol-gel phase transition was investigated. SM, which is a derivative of sulfonamide, was used as a pH responsive moiety, while PCLA-PEG-PCLA was used as a biodegradable, as well as a temperature sensitive one, amphiphilic triblock copolymer. The pentablock copolymer, OSM-PCLA-PEG-PCLA-OSM, was synthesized using Br-PCLA-PEG-PCLA-Br as an ATRP macroinitiator. The number average molecular weights of SM were controlled by adjusting the monomer/initiator feed ratio. The macroinitiator was synthesized by the coupling of 2-bromoisobutyryl bromide with PCLA-PEG-PCLA in the presence of triethyl amine catalyst in dichloromethane. The resultant block copolymer shows a narrow polydispersity. The block copolymer solution shows a sol-gel transition in response to a slight pH change in the range of 7.2-8.0. Gel permeation chromatography (GPC) and NMR were used for the characterization of the polymers that were synthesized.     

Synthesis and characterization of dendritic-linear-dendritic triblock copolymers based on poly(amidoamine) and polystyrene

Dendritic-linear-dendritic triblock copolymers composed of linear polystyrene (PSt) and poly(amidoamine) dendrons have been successfully synthesized. Two bromines-terminated PSt with M_n = 13,000 was prepared by atom transfer radical polymerization (ATRP) using α,α′-dibromo-p-xylene as initiator. Then the terminal bromines at both ends of PSt chains were replaced by one imine group of piperazine (PZ), and further Michael addition reaction of terminal PZ with excess 1,3,5-triacryloylhexahydro-1,3,5-triazine (TT) produced the first generation (G₁) of the triblock copolymer. Continuous growth of dendrons from G1.5 to G4 at the both ends of PSt chains was carried out by the iterative Michael addition reactions with excess PZ and following TT. The ABA triblock copolymers composed of the G₁-G₄ dendrons and the linear PSt were obtained. Structures of the triblock polymers were characterized by GPC and ¹H NMR spectra. Thermal phase transitions of the polymers were studied by DSC measurements, and all of the copolymers displayed a glass transition temperature.     

Synthesis and characterization of ABC ternary segregated H-shaped copolymers

The synthesis of a novel ABC ternary segregated H-shaped copolymer is described, of which a central poly(ethylene glycol) (PEG) chain is terminated on both sides by polystyrene (PS) and poly(tert-butylacrylate) (PtBA) chains. The synthetic procedure involves functionalization of PEG by 2-bromosuccinic anhydride followed by esterification of 1,6-hexanediol, which gives its ends the bifunctional nature that allows sequential growth of two PS, then two PtBA arms via atom transfer radical polymerization (ATRP). The resulting segregated H-shaped copolymers were characterization by NMR spectroscopy and gel permeation chromatography (GPC). All these copolymers were affirmed to have well-defined structures and narrow molecular weight distributions.     

Acrylic ABA triblock copolymer bearing pendant reactive bicycloalkenyl functionality via ATRP and tuning its properties using thiol-ene chemistry

This investigation reports the preparation of tailor-made ABA triblock copolymers (BCP) of 2-ethylhexyl acrylate (PEHA) and dicyclopentenyloxyethyl methacrylate (PDCPMA) bearing pendant reactive cycloalkenyl functionality via atom transfer radical polymerization (ATRP) and thiol-ene modification of the pendant reactive bicycloalkenyl functionality. The chemical structure and molar composition of the polymers were determined by ¹H NMR spectroscopy and molecular weights of the polymers were determined by gel permeation chromatography. AFM as well as DSC analysis showed nanophase-separated morphology in the block copolymers. The pendant reactive bicycloalkenyl group of PDCPMA in the BCPs was successfully modified by thiol-ene reaction and the mechanical properties of the modified BCPs were studied. The thiol modified BCP showed much greater adhesion strength compared to pristine BCP as determined by lap shear test using a UTM. Hardness of the BCP film and UV-cured thiolated BCP film was studied and compared by using a nanoindenter.     

Synthesis of thermoresponsive poly(N-isopropylmethacrylamide) and poly(acrylic acid) block copolymers via post-functionalization of poly(N-methacryloxysuccinimide)

Polymers exhibiting a thermoresponsive, lower critical solution temperature (LCST) phase transition have proven to be useful for many applications as “smart” or “intelligent” materials. A series of poly(N-isopropylmethacrylamide) (PNIPMAM) polymer, poly(N-isopropylmethacrylamide)-b-poly(acrylic acid) (PNIPMAM-b-PAA) diblock, and poly(acrylic acid)-b-poly(N-isopropylmethacrylamide)-b-poly(acrylic acid) (PAA-b-PNIPMAM-b-AA) triblock copolymer samples were synthesized via ATRP. A facile post-functionalization route was developed that uses an activated ester functionality to convert poly(N-methacryloxysuccinimide) (PMASI) blocks to LCST capable polyacrylamide, while poly(t-butyl acrylate) (PtBA) blocks were converted to water-soluble poly(acrylic acid) (PAA). The post-functionalization was monitored via ¹H NMR and ATR-FTIR. The aqueous solution properties were explored and the PNIPMAM polymers were shown to have a LCST phase transition varying from 35 to 60 °C. The ability to synthesize block copolymers that are thermoresponsive and water-soluble will be of great benefit for broader applications in drug delivery, bioengineering, and nanotechnology.     

Synthesis of poly(trioctylammonium p-styrenesulfonate) homopolymers and block copolymers by RAFT polymerization

A method to prepare sulfonated polystyrene-containing block copolymers has been investigated by neutralizing styrene sulfonic acid with trioctylamine to produce the hydrophobic monomer trioctylammonium p-styrenesulfonate (SS-TOA). This monomer was polymerized by reversible addition fragmentation chain transfer (RAFT) polymerization to produce PSS-TOA homopolymers. A PSS-TOA homopolymer was then used as a macro-RAFT agent for the polymerization of styrene to prepare poly(trioctylammonium p-styrenesulfonate)-block-poly(styrene) (PSS-TOA-b-PS). These block copolymers could be ion-exchanged to produce either the hydrophilic sodium salt form of PSS or a hydrophobic quaternary ammonium salt. This approach will be useful for preparing PSS-containing block copolymers with a range of hydrophobic blocks for applications such as ion-exchange membranes.     

Octadecyl acrylate - Methyl methacrylate block and gradient copolymers from ATRP: Comb-like stabilizers for the preparation of micro- and nano-particles of poly(methyl methacrylate) and poly(acrylonitrile) by non-aqueous dispersion polymerization

Three random and three block copolymers of methyl methacrylate (MMA) and octadecyl acrylate (ODA) were synthesized by atom transfer radical polymerization. These copolymers were assessed for their application as stabilizers in the one-step non-aqueous dispersion (NAD) polymerization of MMA and of acrylonitrile (AN) in a non-polar solvent mixture of hexane and dodecane. In all cases stable spherical micro-particle colloidal dispersions were formed with particle diameters in the range of 62-2725 nm for PMMA. Uniform monodisperse PMMA particles with standard deviations in size distributions of less than 5% were obtained in two cases demonstrating the utility of ODA:MMA copolymers as replacement preformed stabilizers in the one-step synthesis of MMA micro-spheres. Overall the block copolymer PMMA₆₄-block-PODA₃₆ gave greater control over size when varying the solvent:monomer ration than a related gradient PMMA-PODA copolymer. These copolymers were further used as stabilizers in the one-step NAD polymerization of MMA with ethylene glycol dimethacrylate (EGDMA) under similar conditions allowing for the preparation of monodisperse cross-linked PMMA particles with diameters ranging from 110 to 1700 nm. The general utility of the copolymers as stabilizers was demonstrated by the NAD polymerization of acrylonitrile (AN) in non-polar solvent mixture of hexane and dodecane giving ‘crumpled’ latex dispersions with particle diameters in the range 85-483 nm.     

Preparation of block copolymer particles by two-step atom transfer radical polymerization in aqueous media and its unique morphology

Submicron-sized poly(i-butyl methacrylate)-block-polystyrene particles were successfully prepared by two-step atom transfer radical polymerization (ATRP) in aqueous media: ATRP in miniemulsion (miniemulsion-ATRP) followed by ATRP in seeded emulsion polymerization (seeded-ATRP). When PiBMA particles, which were prepared by the miniemulsion-ATRP process with polyoxyethylene sorbitan monooleate (Tween 80, nonionic emulsifier) of 6-10 wt % based on iBMA, were used as seed in the seeded-ATRP of styrene, the block copolymer particles having narrow molecular weight distribution and pre-determined molecular weight were prepared at high conversion. Some block copolymer particles had an ‘onion-like’ multilayered structure. In this way, controlled/living free radical polymerization can be employed to obtain unique particle morphologies that may not be easily accessible using conventional free radical polymerization.     

原子转移自由基聚合在合成接枝共聚物中的应用

本文综述了采用原子转移自由基聚合（ATRP）法合成接枝共聚物的研究进展。主要从大分子引发剂法和大分子单体法两方面介绍了原子转移自由基聚合在合成接枝聚合物中的应用。     

Synthesis and self-assembly of miktoarm star copolymers of (polyethylene)2−(polystyrene)2

We report on the synthesis and self-assembly of a novel well-defined miktoarm star copolymer of (polyethylene)₂−(polystyrene)₂, (PE)₂−(PS)₂, with two linear crystalline PE segments and two PS segments as the building blocks based on chain shuttling ethylene polymerization (CSEP), click reaction and atom transfer radical polymerization (ATRP). Initially, alkynyl-terminated PE (PE-) was synthesized via the esterification of pentynoic acid with hydroxyl-terminated PE (PE−OH), which was prepared using CSEP with 2,6-bis[1-(2,6-dimethylphenyl) imino ethyl] pyridine iron (II) dichloride/methylaluminoxane/diethyl zinc and subsequent in situ oxidation with oxygen. (PE)₂−(OH)₂ was then obtained by the click reaction of PE- with diazido and dihydroxyl containing coupling agent. The two hydroxyl groups in (PE)₂−(OH)₂ were then converted into bromisobutyrate by esterification. At last, the (PE)₂−(PS)₂ miktoarm star copolymers were synthesized by ATRP of styrene initiated from (PE)₂−Br₂ macroinitiator. All the intermediates and final products were characterized by ¹H NMR and gel permeation chromatography (GPC). The self-assembly behavior was studied by dynamic light scattering (DLS) and atomic force microscopy (AFM). The crystallization of the (PE)₂−(PS)₂ miktoarm star copolymers was studied by differential scanning calorimetry (DSC).     

Synthesis of poly(ethylene oxide)-block-poly(methyl methacrylate)-block-polystyrene triblock copolymers by two-step atom transfer radical polymerization

The synthesis of ABC triblock copolymer poly(ethylene oxide)-block-poly(methyl methacrylate)-block-polystyrene (PEO-b-PMMA-b-PS) via atom transfer radical polymerization (ATRP) is reported. First, a PEO-Br macroinitiator was synthesized by esterification of PEO with 2-bromoisobutyryl bromide, which was subsequently used in the preparation of halo-terminated poly(ethylene oxide)-block-poly(methyl methacrylate) (PEO-b-PMMA) diblock copolymers under ATRP conditions. Then PEO-b-PMMA-b-PS triblock copolymer was synthesized by ATRP of styrene using PEO-b-PMMA as a macroinitiator. The structures and molecular characteristics of the PEO-b-PMMA-b-PS triblock copolymers were studied by FT-IR, GPC and ¹H NMR.     

Synthesis, characterization and application of well-defined environmentally responsive polymer brushes on the surface of colloid particles

Well-defined poly(2-(dimethylamino) ethyl methacrylate) (PDMAEMA) brushes with high density were synthesized on the surface of polystyrene latex by atom transfer radical polymerization (ATRP) using acetone/water as the solvent and CuCl/CuCl₂/bpy as the catalyst. It was found that the polydispersity of PDMAEMA brushes decreased with the increasing external CuCl₂ concentration. The polymer brushes showed their lower critical solution temperature (LCST) at 31 and 33 °C under pH values of 10.0 and 8.0, respectively. Dynamic light scattering studies demonstrate that PDMAEMA brushes were pH- and salt-responsive. PDMAEMA domains were used as the nanoreactors to generate gold nanoparticles on the surface of colloid particles. TEM results indicate that monodispersed gold nanoparticles were obtained. These gold composite nanoparticles displayed effective catalytic activity in the reduction of 4-nitrophenol by NaBH₄.     

Synthesis, characterization and fluorescence adjustment of well-defined polymethacrylates with pendant π-conjugated benzothiazole via atom transfer radical polymerization (ATRP)

Two compounds containing the benzothiazole moiety, 4-(2-benzothiazole-2-yl-vinyl)-phenyl methacrylate (BVMA) and 2-bromo-2-methyl-propionic acid 4-(2-benzothiazole-2-yl-vinyl)-phenyl ester (BPBVE) were synthesized. Atom transfer radical polymerization (ATRP) of BVMA was conducted at 60 °C using BPBVE and CuBr/2,2′-bipyridine (BPY) as initiator and catalyst, respectively. Chain extension with 4-methacryloxy-hexyloxy-4′-nitrostilbene (MHNS) was conducted using PBVMA as the macroinitiator. The homopolymer PBVMA in DMF solution emitted blue fluorescence, and the copolymer PBVMA-b-PMHNS emitted orange fluorescence at about 610 nm due to the intramolecular energy transfer. ATRP of BVMA was also conducted using 2-bromo-2-methyl-propionic acid 4-nitrostilbene-hexyloxy ester (BPNHE) as an initiator. The obtained polymer was characterized via ¹H NMR and the fluorescence intensity was found to change with increasing number average molecular weight (M_n). The polymer with M_n = 15900 emitted white fluorescence in DMF solution.