Drug releasing characteristics of thermo- and pH-sensitive interpenetrating polymer networks based on poly (N-isopropylacrylamide)

Interpenetrating polymer networks (IPNs) of poly(N-isopropylacrylamide)/polyurethane (PNIPAAm/PU) and poly(N-isopropylacrylamide)/poly(acrylic acid) (PNIPAAm/PAA) were synthesized to investigate the swelling and drug releasing behavior. The presence of urethane network in PNIPAAm/PU IPNs improved the mechanical strength, but reduced the swelling and drug releasing rates because of its hydrophobic characteristics. The swelling transition temperatures of PNIPAAm gels were little affected by the incorporation of PU networks in IPN structures. The drug releasing process was analyzed with a simple exponential expression of time dependent fractional drug release. The swelling and drug releasing behavior of PNIPAAm/PAa IPNs was significantly affected by the variation of PAA compositions. The drug release process changed from anomalous to dual type via zero-order mode with increasing PAA concentration due to the competitive swelling rates between PNIPAAm and PAA during release process. The releasing rate decreased in the buffer solution of pH 7.4, but increased in that of pH 5.0 with increasing PAA concentration at both 28 and 37°C because the swelling power of PAA in pH 5.0 was much less than that in pH 7.4. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 64: 2647–2655, 1997     

Swelling of thermosensitive interpenetrating polymer networks composed of poly(vinyl alcohol) and poly(acrylic acid)

The swelling behavior of interpenetrating polymer networks (IPNs) composed of poly(vinyl alcohol) (PVA) and poly(acrylic acid) (PAA) in water was studied. The PVA/PAA IPN gels were prepared by four synthetic methods. The swelling behaviors of these IPNs made by different methods were compared. The differences in swelling behaviors of samples are discussed on the basis of their structural and physical differences. © 1996 John Wiley & Sons, Inc.     

Insolubilization of sodium chondroitin sulfate by forming a semi‐interpenetrating polymer network with acrylic acid: A potential carrier for colon‐specific drug delivery

To reduce the highly hydrophilic property of chondroitin sulfate (ChS), a semi‐interpenetrating polymer network (semi‐IPN) of chondroitin sulfate/polyacrylic acid (PAA) was prepared as a drug carrier by crosslinking acrylic acid with diethyleneglycol diacrylate. The swelling properties of the semi‐IPNs with different concentrations of crosslinking agent were correlated. The moisture sorption profiles were evaluated using differential thermal analysis. Ketoprofen was used as a drug probe to evaluate the performance of the drug released from the semi‐IPN matrices. The prepared semi‐IPNs demonstrated significant swelling reduction properties with both gastric and intestinal fluids compared with those of both the pure ChS and the ChSAA blend without the crosslinking agent. The amount of accumulated drug released from the semi‐IPNs was less than 30 wt % at pH 1.2 and up to 80 wt % at pH 7.4. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 114–122, 2002     

Hindered diffusion of oligosaccharides in high strength poly(ethylene glycol)/poly(acrylic acid) interpenetrating network hydrogels: Hydrodynamic vs. obstruction models

Diffusion coefficients of small oligosaccharides within high strength poly(ethylene glycol)/poly(acrylic acid) interpenetrating network (PEG/PAA IPN) hydrogels were measured by diffusion through hydrogel slabs. The ability of hindered diffusion models previously presented in the literature to fit the experimental data is examined. A model based solely on effects due to hydrodynamics is compared to a model based solely on solute obstruction. To examine the effect of polymer volume fraction on the observed diffusion coefficients, the equilibrium volume fraction of polymer in PEG/PAA IPNs was systematically varied by changing the initial PEG polymer concentration in hydrogel precursor solutions from 20 to 50 wt./wt.%. To examine the effect of solute radius on the observed diffusion coefficients, solute radii were varied from 3.3 to 5.1 Å by measuring diffusion coefficients of glucose, a monosaccharide; maltose, a disaccharide; and maltotriose, a trisaccharide. Both the hydrodynamic and obstruction models rely on scaling relationships to predict diffusion coefficients. The proper scaling relationship for each of the hindered diffusion models is evaluated based on fits to experimental data. The scaling relationship employed is found to have a greater significance for the hydrodynamic model than the obstruction model. Regardless of the scaling relationship employed, the obstruction model provides a better fit to our experimental data than the hydrodynamic model.     

Ionizable interpenetrating polymer networks of carboxymethyl cellulose and polyacrylic acid: Evaluation of water uptake

A semi interpenetrating polymer network (IPN) of carboxymethyl cellulose (CMC) and crosslinked polyacrylic acid (PAA) has been prepared and its water‐sorption capacity has been evaluated as a function of chemical architecture of the IPN, pH, and temperature of the swelling medium. The water uptake potential of the IPNs has also been investigated in inorganic salt containing aqueous solutions and simulated biological fluids. The IPN was characterized by IR spectral analysis, and the network parameters such as average molecular weight between crosslinks (M_c), crosslink density (q), and number of elastically effective chains (V_e) have been evaluated by water‐sorption measurements. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2054–2065, 2004     

Synthesis and swelling characteristics of pH and thermoresponsive interpenetrating polymer network hydrogel composed of poly(vinyl alcohol) and poly(acrylic acid)

The swelling behavior of novel pH- and temperature-sensitive interpenetrating polymer networks (IPNs) composed of poly(vinyl alcohol) (PVA) and poly(acrylic acid) (PAAc) in water was investigated. The PVA/PAAc IPN hydrogels were synthesized by UV irradiation, followed by a repetitive freezing and thawing process by which PVA hydrogel networks were formed inside of cross-linked PAAc chains. The swelling behaviors of these IPNs were analyzed in buffer solution at various pH and temperature ranges. Swelling ratios of all IPNs were relatively high, and they showed reasonable sensitivity to both pH and temperature. Hydrogels showed both the positive and negative swelling behaviors depending on PAAc content. IPN46 showed the positive temperature-sensitive swelling behaviors and its stepwise changes in swelling ratio was about 1.8 and 2.0 obtained between 25 and 45°C at pH 7, and between pH 4 and 7 at 35°C, respectively. The positive temperature dependence is attributed to the formation and dissociation of hydrogen bonding complexes between PVA and PAAc. These IPNs are expected to show a pH- and temperature-sensitive drug release according to the stepwise behavior at this temperature region. © 1996 John Wiley & Sons, Inc.     

Synthesis and characterization of pH‐ and temperature‐sensitive silk sericin/poly(N‐isopropylacrylamide) interpenetrating polymer networks

Interpenetrating polymer networks (IPNs) composed of silk sericin (SS) and poly(N‐isopropylacrylamide) (PNIPAAm) were prepared simultaneously. The properties of the resultant IPN hydrogels were characterized by differential scanning calorimetry and SEM as well as their swelling behavior at various temperatures and pH values. The single glass transition temperature (T_g) presented in the IPN thermograms indicated that SS and PNIPAAm form a miscible pair. The swollen morphology of the IPNs observed by SEM demonstrated that water channels (pores present in SEM micrographs) were distributed homogeneously through out the network membranes. The swelling ratio of the IPNs depended significantly on the composition, temperature and pH of the buffer solutions. The dynamic transport of water into the IPN membrane was analyzed based on the Fickian equation. Copyright © 2006 Society of Chemical Industry     

Mechanical properties of interpenetrating polymer network hydrogels based on hybrid ionically and covalently crosslinked networks

Hydrogels are polymer networks swollen in water. Because of their soft and wet nature, and their ability to show large volume changes, hydrogels can be useful in many biomedical and actuator applications. In these applications, it is crucial to tune the mechanical and physical properties of a hydrogel in a controllable manner. Here, interpenetrating polymer networks (IPNs) made of a covalently crosslinked network and an ionically crosslinked network were produced to investigate the effective parameters that control the physical and mechanical properties of an IPN hydrogel. Covalently crosslinked polyacrylamide (PAAm) or poly(acrylic acid) (PAA) networks were produced in the presence of alginate (Alg) that was then ionically crosslinked to produce the IPN hydrogels. The effect of ionic crosslinking, degree of covalent crosslinking, AAm : Alg and AA : Alg ratio on the swelling ratio, tensile properties, indentation modulus, and fracture energy of IPN hydrogels was studied. A hollow cylindrical hydrogel with gradient mechanical properties along its length was developed based on the obtained results. The middle section of this hydrogel was designed as a pH triggered artificial muscle, while each end was formulated to be harder, tougher, and insensitive to pH so as to function as a tendon‐like material securing the gel muscle to its mechanical supports. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 2504–2513, 2013     

Swelling behavior of semi‐interpenetrating polymer network hydrogels composed of poly(vinyl alcohol) and poly(acrylamide‐co‐sodium methacrylate)

Interpenetrating polymer network (IPN) hydrogels based on poly(vinyl alcohol) (PVA) and poly(acrylamide‐co‐sodium methacrylate) poly(AAm‐co‐SMA) were prepared by the semi IPN method. These IPN hydrogels were prepared by polymerizing aqueous solution of acrylamide and sodium methacrylate, using ammonium persulphate/N,N,N¹,N¹‐tetramethylethylenediamine (APS/TMEDA) initiating system and N,N¹‐methylene‐bisacrylamide (MBA) as a crosslinker in the presence of a host polymer, poly(vinyl alcohol). The influence of reaction conditions, such as the concentration of PVA, sodium methacrylate, crosslinker, initiator, and reaction temperature, on the swelling behavior of these IPNs was investigated in detail. The results showed that the IPN hydrogels exhibited different swelling behavior as the reaction conditions varied. To verify the structural difference in the IPN hydrogels, scanning electron microscopy (SEM) was used to identify the morphological changes in the IPN as the concentration of crosslinker varied. In addition to MBA, two other crosslinkers were also employed in the preparation of IPNs to illustrate the difference in their swelling phenomena. The swelling kinetics, equilibrium water content, and water transport mechanism of all the IPN hydrogels were investigated. IPN hydrogels being ionic in nature, the swelling behavior was significantly affected by environmental conditions, such as temperature, ionic strength, and pH of the swelling medium. Further, their swelling behavior was also examined in different physiological bio‐fluids. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 302–314, 2005     

Studies on semi‐interpenetrating polymer network based on nitrile rubber and poly(methyl methacrylate)

Sequential interpenetrating polymer networks (IPNs) based on nitrile rubber and poly(methyl methacrylate) (PMMA) were synthesized. IPN compositions were varied by varying the swelling time. Two methods were adopted for making IPNs. The first method is “single‐step IPN” (SIPN) and the second method is “multistep IPN” (MIPN). The compositions were fixed around 90, 80, 70, 60 and 50% of NBR. In SIPN mode, swelling in monomer and subsequent curing was done once. In MIPN mode, swelling in monomer and curing was repeatedly done. Tensile strength of IPNs was found to increase with PMMA content, MIPN showing higher strength compared to SIPN. Dynamic modulus showed a similar trend. The tan δ value was found to decrease with PMMA content. At 62/38 nitrile rubber (NBR)/PMMA, MIPN composition isolated tan δ peaks appeared near glass transition temperatures of NBR and PMMA, respectively. Scanning electron micrograph showed phase‐separated morphology at the same MIPN composition. Solvent resistance increased with IPN formation maintaining higher resistance for MIPN compared to SIPN. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 354–360, 2004     

Behavior of polyoxyethylene‐containing interpenetrating polymer networks and their LiCLO4 complexes as phase transfer catalysts and ionic conductors

Simultaneous grafted interpenetrating polymer networks (IPNs) based on [castor oil–poly(ethylene glycol) (PEG)] polyurethane and poly(alkyl methacrylate) were synthesized by simultaneously coupling castor oil and PEG with 2,4‐toluene diisocyanate and by radical polymerization of alkyl methacrylate with castor oil. The gel content of the IPNs is ～96% in most cases. The IPNs were characterized by infrared spectroscopy. The effects of compositional variation of the IPNs on phase transfer catalytic efficiency and mechanical properties, and conductivity of the IPNs complexed with LiClO₄ were also studied. The results show that the IPNs have good phase transfer catalytic ability in the Williamson reaction and exhibit a maximum conversion of potassium phenolate at 55% polyoxyethylene (PEO). The phase transfer catalytic ability of the IPN increases with molecular weight of PEG used in the IPN synthesis and with the length of alkyl groups of the grafts, but decreases with increasing crosslinking degree. The complex of the IPNs with LiClO₄ exhibits good ionic conductivity at room temperature in the range 10^?5–3 × 10^?4 S/cm. This ionic conductivity decreases with increasing either the crosslinking degree or the molecular weight of PEG used, but increases with increasing PEO content. The more compatible are the grafts with PEO, the lower is the conductivity. Either butyl methacrylate or ethyl methacrylate is a good choice for the monomer in the synthesis of the IPNs for use as phase transfer catalysts and ion conducting materials. The IPNs showed high tensile strength in the range 10–20 MPa. The good mechanical properties of the IPNs favor their applications as a strong solid polymer electrolyte film and an easily recoverable phase transfer catalyst. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 830–836, 2003     

Synthesis and characteristics of interpenetrating polymer network hydrogel composed of chitosan and poly(acrylic acid)

Interpenetrating polymer network (IPN) hydrogels composed of chitosan and poly(acrylic acid) (PAAc) were synthesized by UV irradiation method, and their structure, crystallinity, swelling behavior, thermal property, and mechanical property were investigated. Chitosan/PAAc IPNs exhibited relatively high equilibrium water content and also showed reasonable sensitivity to pH. From the swelling behaviors at various pH's, Fourier transform infrared spectra at high temperature and thermal analysis confirmed the formation of polyelectrolyte complex due to the reaction between amino groups in chitosan and carboxyl groups in PAAc. For this reason, even at a swollen state, the present chitosan/PAAc IPNs possess good mechanical properties. Particularly, the CA‐2 sample (with a weight ratio of chitosan/PAAc = 50/50, molar ratio [NH₂]/[COOH] = 25/75) showed the lowest equilibrium water content and free water content, attributed to the more compact structure of the polyelectrolyte than CA‐1 or CA‐3 due to the high amount of interchain bond within the IPN. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 113–120, 1999     

Synthesis and characteristics of the interpenetrating polymer network hydrogel composed of chitosan and polyallylamine

A temperature‐ and pH‐dependent hydrogel was studied with interpenetrating polymer network (IPN) hydrogels constructed with water‐insoluble chitosan and polyallylamine. Various IPNs were prepared from different weight ratios of chitosan–polyallylamine. Crosslinked‐IPN hydrogels exhibited relatively high equilibrium water content (EWC) in the range 80–83%. The EWC of IPN hydrogels depended on pH and the amount of complex, which is the content of chitosan and polyallylamine. The differential scanning calorimeter (DSC) thermogram of fully swollen IPN hydrogels appeared between 3 to 4 °C. The IPNs exhibited two glass‐transition temperatures (T_gs), indicating the presence of phase separation in the IPNs as exhibited by dielectric analysis (DEA). © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 498–503, 2002     

Interpenetrating polymer networks based on nitrile rubber and metal methacrylates

Interpenetrating polymer networks (IPNs) based on nitrile rubber (NBR) as first component and zinc dimethacrylate (ZnDMA), aluminum trimethacrylate (AlTMA), or zirconium tetramethacrylates (ZrTeMA) as second component were synthesized. Sequential IPNs (SeqIPN) were formed by two routes such as compression molding (CM) and swelling/curing (SC). The IPNs were found to have superior properties compared to metal oxide/hydroxide‐filled NBR. Tensile strength has increased to a large extent while maintaining appreciable elongation. Total crosslink density (covalent and ionic) was found to increase in the order NBR/metal oxide or hydroxide < SeqIPN(CM route) < SeqIPN (SC route). IPNs are found to retain high storage modulus even in the rubbery region. It is observed that change of technique for IPN formation has drastically changed the modulus of the present system. Decrease in tan δ value and inward shifting of peaks were observed because of IPN formation. Morphology of SeqIPN by SC process was found to be more uniform compared to others. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 2542–2548, 2006     

Behavior of semi IPN hydrogels composed of PEG and AAm/SMA copolymers in swelling and uptake of Janus Green B from aqueous solutions

Semi-interpenetrating polymer network (semi IPN) hydrogels of poly(ethylene glycol; PEG) were prepared as a water adsorbent for dye (Janus Green B) sorption. For this, PEG and copolymer of acrylamide/sodium methacrylate (AAm/SMA) were prepared by polymerization of aqueous solution of acrylamide (AAm), sodium methacrylate (SMA) using ammonium persulfate (APS)/N,N,N′,N′-tetramethylethylenediamine (TEMED) as redox initiating pair in presence of PEG and poly(ethylene glycol)dimethacrylate (PEGDMA) as crosslinker. FTIR spectroscopy was used to identify the presence of different repeating units in the semi IPNs. Some swelling and diffusion characteristics were calculated for different semi IPNs and hydrogels prepared under various formulations. Water uptake and dye sorption properties of AAm/SMA hydrogels and AAm/SMA/PEG semi IPNs were investigated as a function of chemical composition of the hydrogels. Janus Green B have used in sorption studies. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Cellulose–chitosan interpenetrating polymer network for electro‐active paper actuator

In this article, the cellulose‐chitosan interpenetrating polymer network (IPN) films were prepared and fabricated as the electro‐active paper actuator. The characteristics of the cellulose–chitosan IPN films were examined by SEM, FT‐IR, XRD, DSC, and tensile test. The performance of the IPNs based actuator was evaluated in terms of bending displacement with respect to the actuation frequency, voltages, humidity levels, chitosan content, and time variation. It was observed that with chitosan content increasing in the IPNs, the crystallinity decreased and the network became denser, which caused the Young's modulus to increase. Chitosan content in IPNs also significantly affected the bending performance. The optimum IPN weight ratio of cellulose and chitosan was 60 : 40. The maximum bending displacement of 7.2 mm was found at 80% relative humidity level. In terms of durability, the bending lifetime at 70% humidity level was about 10 h with 17% performance degradation. More issues on the actuator performance and durability are addressed. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation and properties of urethane acrylate-epoxy interpenetrating polymer networks containing silica nanoparticles

Summary In this study, interpenetrating polymer networks (IPNs) and IPN composite materials were prepared by in situ polymerization of urethane dimethacrylate (UDMA) and bisphenol-A diglycidyl ether epoxy resin (DGEBA) with or without silica nanoparticles. Dynamic mechanical analysis (DMA), three-point bending test, thermogravimetric analysis (TGA) and visible spectrometry were performed to evaluate the physical properties of the resulting IPNs and IPN composite materials. The IPNs showed high transparency and higher elastic modulus and strength than that of each homopolymer at ratio of UDMA/ DGEBA is 70/30. The IPN composites maintained high transparency in spite of the addition of silica nanoparticles. Moreover, elastic modulus and surface hardness of the IPN composites increased with increasing silica content.     

Preparation and characterization of tetracycline‐loaded interpenetrating polymer networks of carboxymethyl cellulose and poly(acrylic acid): water sorption and drug release study

Tetracycline (TC)‐loaded ionic interpenetrating polymer networks (IPNs) of carboxymethyl cellulose (CMC) and crosslinked poly(acrylic acid) (PAA) were prepared and characterized by infrared spectral analysis, differential scanning calorimetry and scanning electron microscopy techniques. The prepared IPNs were evaluated for in vitro blood compatibility by clot formation and hemolysis methods and their water imbibitions capacity was determined. Fractional release dynamics of tetracycline was also investigated from loaded IPNs of CMC and PAA. The entrapped drug was examined for antibacterial activity and structural integrity and effects of various parameters such as percentage loading of the drug, chemical composition of the carrier IPN, pH and temperature of the release medium were investigated on the release profiles of TC. The drug was also released in different simulated biological fluids. Copyright © 2005 Society of Chemical Industry     

Monitoring of swelling of interpenetrating polymer network of polyethylene/poly(styrene-co-butylmethacrylate) (PE/P(S-co-BMA)) in toluene and cyclohexane using fluorescence spectroscopy

A real-time monitoring of excimer emission fluorescence probe di(1-pyrenemethyl)ether (DiPyM) was used for study swelling interpenetrating polymer network (IPN) consisting of polyethylene/poly(styrene-co-butylmethacrylate) (PE/P(S-co-BMA)) and containing different network density. DiPyM was introduced into IPN during polymerisation or was penetrated into blocks from toluene solution. The effect of solvent quality for swelling of IPN and density of IPN network was also studied. From steady-state measurements of monomer and excimer emission ratio (I_e/I_m), no difference was found between rate of swelling IPN with 0.5, 1 and 3 mol% of cross-linker. The rate of IPN swelling seems to be rather high. Some differences was found at real-time monitoring of excimer emission (λ_em=495 nm) of DiPyM measured during desorption of DiPyM from swelled IPN blocks. At higher content of cross-linker, a slower rate of DiPyM desorption from IPN matrix was observed.     

Amphiphilic Interpenetrating Networks for the Delivery of Hydrophobic, Low Molecular Weight Therapeutic Agents

To investigate the delivery of hydrophobic therapeutic agents, a novel class of interpenetrating networks (IPNs) were synthesized and composed of two networks: methacrylic acid grafted with poly(ethylene glycol) tethers, P(MAA-g-EG), and poly(n-butyl acrylate) (PBA). The hydrophilic P(MAA-g-EG) networks are pH-responsive hydrogels capable of triggered release of an encapsulated therapeutic agent, such as a low molecular weight drug or a protein, when it passes from the stomach (low pH) to upper small intestine (neutral pH). PBA is a hydrophobic homopolymer that can affect the IPN swelling behavior, the therapeutic agent loading efficiencies in IPNs, and solute release profiles from IPNs. In dynamic swelling conditions, IPNs had greater swelling ratios than P(MAA-g-EG), but in equilibrium swelling conditions the IPN swelling ratio decreased with increasing PBA content. Loading efficiencies of the model therapeutic agent fluorescein ranged from 21 - 44%. Release studies from neat P(MAA-g-EG) and the ensuing IPNs indicated that the transition from low pH (2.0) to neutral pH (7.0) triggered fluorescein release. Maximum fluorescein release depended on the structure and hydrophilicity of the carriers used in these studies.